DOI: https://doi.org/10.1002/nsg.70044
تاريخ النشر: 2026-02-26
المؤلف: John Ball وآخرون
الموضوع الرئيسي: طرق الجيوفيزياء والجيوكهربائية
نظرة عامة
تناقش هذه الفقرة تطبيق التصوير الكهربائي المقاوم (ERT) لمراقبة السدود، مع تسليط الضوء على حساسيته لمحتوى الرطوبة والخصائص الفيزيائية مثل المسامية. تسهل أنظمة ERT الآلية المراقبة الزمنية، مما يمكّن من اكتشاف التغيرات في ظروف الأرض. ومع ذلك، يمكن أن تؤدي التباينات الهيكلية في بيئات السدود – التي تتميز بالسدود الموزعة، والصخور الداعمة أو الهياكل الخرسانية، والمسطحات المائية المجاورة – إلى تأثيرات خارج الشبكة التي تعيق الميزات الحرجة مثل مناطق التسرب في صور ERT.
لمعالجة هذه التحديات، تم إجراء نمذجة اصطناعية لمحاكاة الظروف في سد مكاتاكووك في كندا. تضمنت هذه النموذج مكونات مختلفة، بما في ذلك المسطح المائي، والدعامة الخرسانية، والنواة، والصخور الجافة والرطبة. تشير النتائج إلى أن الميزات الداخلية والتغيرات الزمنية، مثل التغيرات في مستوى المسطح المائي والمقاومة، يمكن أن تؤدي إلى تأثيرات ثلاثية الأبعاد كبيرة في عكسات ERT، مما قد يؤدي إلى تفسيرات خاطئة. ومع ذلك، أظهرت النمذجة أنه يمكن تحديد مناطق التسرب، مما يشير إلى أنه على الرغم من التشوهات الناتجة عن التعقيد الهيكلي، لا يزال ERT أداة قابلة للتطبيق لمراقبة السدود. تؤكد هذه الدراسة على أهمية أخذ هذه التباينات في الاعتبار لتحسين دقة توزيعات المقاومة في تقييمات السدود.
مقدمة
تسلط مقدمة ورقة البحث الضوء على الدور الحاسم للسدود كحواجز هيدروليكية لمختلف الوظائف الاجتماعية والاقتصادية، بما في ذلك إمدادات المياه، والنقل، وتوليد الطاقة الكهرومائية، وتخزين النفايات. ومع ذلك، فإن تدهور السدود بسبب عوامل مثل تجاوز المياه، والتآكل الداخلي، وفشل المنحدرات يشكل مخاطر كبيرة، بما في ذلك الفيضانات والأضرار الاقتصادية، كما يتضح من حوادث مثل انهيار جسر واللي وبرومادينيو. للتخفيف من هذه المخاطر، تعتبر المسوحات والمراقبة الفعالة لحالات السدود ضرورية، ومع ذلك، فإن الطرق التقليدية مثل المسح السطحي والمراقبة الجيوتقنية لها قيود في اكتشاف الظروف تحت السطحية والعيوب الداخلية.
تؤكد الورقة على إمكانيات التصوير الكهربائي المقاوم (ERT) كتقنية جيوفيزيائية لتوصيف الظروف تحت السطحية في السدود. يمكن أن يوفر ERT رؤى حول القضايا الداخلية مثل مسارات التسرب ومناطق الضعف، ولكنه يواجه تحديات تتعلق بعدم تميز حلول النموذج وتأثيرات ثلاثية الأبعاد الناتجة عن الهياكل المعقدة للسدود. تركز الدراسة على سد مكاتاكووك في نيو برونزويك، كندا، للتحقيق في كيفية تأثير التعقيدات الهيكلية والتغيرات الزمنية في مقاومة المياه والمستوى على تفسير بيانات ERT. من خلال نمذجة ERT الاصطناعية، تهدف الدراسة إلى تقييم قابلية اكتشاف الميزات الداخلية، مثل مناطق التسرب، في ظل وجود هذه التعقيدات، مما يسهم في تقديم رؤى قيمة للتحقيقات الجيوفيزيائية لهياكل السدود المماثلة.
طرق
في هذا القسم، يصف المؤلفون المنهجية المستخدمة لإنشاء نموذج اصطناعي لسد مكاتاكووك، بهدف قياس تأثيرات المكونات الهيكلية المختلفة على نتائج العكس. يتكون النموذج من مناطق متميزة تمثل نواة الطين، والجدار الخرساني، والصخور الجافة والرطبة، والمسطح المائي العلوي، والمياه السفلية. تم تطوير الهندسة باستخدام أوتوكاد، ومخططات الموقع، والإحداثيات الطبوغرافية، ممتدة حوالي 500 م جانبياً وعمودياً للحفاظ على ظروف تدفق التيار الصفري. من الجدير بالذكر أنه تم استبعاد بعض الهياكل المعقدة، مثل قناة التحويل الخرسانية، لتبسيط النموذج، الذي تم تحويله في النهاية إلى شبكة عناصر نهائية غير هيكلية ثلاثية الأبعاد باستخدام Gmsh، تتكون من 243,797 عنصر و36,967 عقدة.
كما يوضح المؤلفون عملية تحديد أعماق نقاط الأقطاب الفعالة، نظرًا لنسبة الطول إلى المسافة للأقطاب، والتي وُجد أنها تلغي الافتراض الشائع لمصادر النقاط على السطح. بدلاً من ذلك، تم حساب الأعماق المثلى عند حوالي 61% و66% من أطوال الأقطاب لمواقع مختلفة على السد. تم إجراء نمذجة أمامية باستخدام كود ERT ثلاثي الأبعاد R3t، مع تضمين أخطاء عشوائية موزعة بشكل غاوسي لمحاكاة ظروف واقعية. تم تطبيق تقنيات العكس، بما في ذلك التنظيم المقيد للنعومة، لاستعادة توزيعات المقاومة مع تقييم تأثير الميزات الهيكلية على النتائج. بالإضافة إلى ذلك، سمحت المنهجية بإجراء تحليل زمني لرؤية التغيرات في المقاومة تحت ظروف متغيرة داخل بيئة السد.
نتائج
في قسم النتائج، يقدم المؤلفون مجموعة من الأقسام الرأسية (2D) المستمدة من نماذج عكسية ثلاثية الأبعاد جنبًا إلى جنب مع الرسوم البيانية لمقاومات داخل مناطق ثلاثية الأبعاد محددة من هذه النماذج. تسهل هذه الطريقة فهمًا أوضح للنتائج الرئيسية من خلال تمثيل توزيعات المقاومة وتغيراتها المكانية بصريًا. يسمح دمج الأقسام ثنائية الأبعاد مع الرسوم البيانية بإجراء تحليل شامل للخصائص تحت السطحية، مع تسليط الضوء على الأنماط والظواهر المهمة في بيانات المقاومة.
مناقشة
لقد كان سد مكاتاكووك، وهو سد مكون من صخور بطول 500 م اكتمل في عام 1968، موضوعًا للمراقبة المستمرة بسبب القضايا المتعلقة بتفاعلات القلويات مع الركام (AAR) في هيكله الخرساني. تم تنفيذ برنامج شامل للمراقبة الجيوفيزيائية، بما في ذلك استشعار درجة الحرارة الموزعة بالألياف الضوئية (DTS) والتصوير الكهربائي المقاوم (ERT)، لتقييم التسرب والظواهر الحرارية المرتبطة بنواة السد وتفاعلها مع الدعامة الخرسانية. كشفت المراقبة عن تباينات موسمية كبيرة في المقاومة داخل نواة الطين، مع تأخر التغيرات عن تلك في مياه المسطح المائي، مما يشير إلى مسارات تسرب محتملة تتأثر بالشقوق الناتجة عن AAR في الخرسانة.
أظهرت المحاكاة التي أجريت لتقييم تأثيرات مقاومات الخرسانة والمسطح المائي المتغيرة على نتائج العكس في ERT أن وجود الهيكل الخرساني يعقد تصوير المقاومة. أشارت العكسات إلى أن المقاومات المنخفضة في النواة قد تكون آثارًا لتأثير الخرسانة المجاورة، خاصة عندما كانت مقاومة الخرسانة منخفضة. بالإضافة إلى ذلك، وُجد أن التغيرات في مقاومة المسطح المائي ومستويات المياه تؤثر على المقاومة المصورة في النواة، حيث أدت المقاومات الأعلى في المسطح المائي إلى انخفاضات غير متوقعة في مقاومة النواة بسبب التأثيرات التعويضية في عملية العكس. تؤكد الدراسة على أهمية التفسير الدقيق لبيانات المقاومة في مراقبة السدود، خاصة في سياق التفاعلات تحت السطحية المعقدة والتغيرات الموسمية.
DOI: https://doi.org/10.1002/nsg.70044
Publication Date: 2026-02-26
Author(s): John Ball et al.
Primary Topic: Geophysical and Geoelectrical Methods
Overview
The section discusses the application of Electrical Resistivity Tomography (ERT) for the monitoring of dams, highlighting its sensitivity to moisture content and physical properties such as porosity. Automated ERT systems facilitate time-lapse monitoring, enabling the detection of variations in ground conditions. However, the structural heterogeneity of dam environments—characterized by zoned embankments, supporting bedrock or concrete structures, and adjacent headponds—can lead to off-grid effects that obscure critical features like leakage zones in ERT images.
To address these challenges, synthetic modeling was conducted to simulate conditions at the Mactaquac Dam in Canada. This model incorporated various components, including the headpond, concrete abutment, core, and both dry and wet rockfill. The findings indicate that internal features and temporal changes, such as variations in headpond level and resistivity, can induce significant 3D effects in ERT inversions, potentially leading to misinterpretations. Nevertheless, the modeling demonstrated that leakage zones could still be identified, suggesting that despite the distortions caused by structural complexity, ERT remains a viable tool for dam monitoring. This research emphasizes the importance of accounting for such heterogeneities to improve the accuracy of resistivity distributions in dam assessments.
Introduction
The introduction of the research paper highlights the critical role of dams as hydraulic barriers for various societal and economic functions, including water supply, transportation, hydroelectric power generation, and waste storage. However, the degradation of dams due to factors such as overtopping, internal erosion, and slope failure poses significant risks, including flooding and economic damage, as evidenced by incidents like the Whalley Bridge and Brumadinho failures. To mitigate these risks, effective surveying and monitoring of dam conditions are essential, yet traditional methods such as walkover surveying and geotechnical monitoring have limitations in detecting subsurface conditions and internal defects.
The paper emphasizes the potential of Electrical Resistivity Tomography (ERT) as a geophysical technique for characterizing subsurface conditions in dams. ERT can provide insights into internal issues such as seepage pathways and areas of weakness, but it faces challenges related to the nonuniqueness of model solutions and the influence of 3D effects from complex dam structures. The study focuses on the Mactaquac Dam in New Brunswick, Canada, to investigate how structural complexities and temporal variations in water resistivity and level affect ERT data interpretation. Through synthetic ERT modeling, the research aims to assess the detectability of internal features, such as leakage zones, in the presence of these complexities, thereby contributing valuable insights for geophysical investigations of similar dam structures.
Methods
In this section, the authors describe the methodology employed to create a synthetic model of the Mactaquac Dam, aimed at quantifying the effects of various structural components on inversion results. The model consists of distinct regions representing the clay till core, concrete wingwall, wet and dry rockfill, upstream headpond, and downstream tailwater. The geometry was developed using AutoCAD, site diagrams, and topographic coordinates, extending approximately 500 m laterally and vertically to maintain zero current flux boundary conditions. Notably, certain complex structures, such as the concrete diversion sluiceway, were excluded to simplify the model, which was ultimately transformed into a 3D unstructured finite element mesh using Gmsh, comprising 243,797 elements and 36,967 nodes.
The authors also detail the process of determining effective electrode point depths, given the length-to-spacing ratio of the electrodes, which was found to invalidate the common assumption of point sources at the surface. Instead, optimal depths were calculated at approximately 61% and 66% of the electrode lengths for different locations on the dam. Forward modeling was conducted using the 3D ERT code R3t, incorporating Gaussian-distributed random errors to simulate realistic conditions. Inversion techniques, including smoothness-constrained regularization, were applied to recover resistivity distributions while assessing the impact of structural features on the results. Additionally, the methodology allowed for time-lapse analysis to visualize changes in resistivity under varying conditions within the dam environment.
Results
In the Results section, the authors present a combination of vertical (2D) sections derived from 3D inverse models alongside histograms of resistivities within designated 3D regions of these models. This approach facilitates a clearer understanding of the key findings by visually representing the resistivity distributions and their spatial variations. The integration of 2D sections with histograms allows for a comprehensive analysis of the subsurface characteristics, highlighting significant patterns and anomalies in the resistivity data.
Discussion
The Mactaquac Dam, a 500 m long rockfill embankment dam completed in 1968, has been subject to ongoing monitoring due to issues related to alkali-aggregate reactions (AAR) in its concrete structure. A comprehensive geophysical monitoring program, including fiber optic distributed temperature sensing (DTS) and electrical resistivity tomography (ERT), has been implemented to assess seepage and temperature anomalies associated with the dam’s core and its interaction with the concrete abutment. The monitoring has revealed significant seasonal variations in resistivity within the clay-till core, with changes lagging behind those in the headpond water, indicating potential seepage pathways influenced by AAR-induced cracking in the concrete.
Simulations conducted to evaluate the effects of varying concrete and headpond resistivities on ERT inversion results demonstrated that the presence of the concrete structure complicates resistivity imaging. The inversions indicated that low resistivities in the core could be artifacts of the adjacent concrete’s influence, particularly when the concrete’s resistivity was low. Additionally, changes in headpond resistivity and water levels were found to affect the imaged resistivity in the core, with higher headpond resistivities leading to unexpected decreases in core resistivity due to compensatory effects in the inversion process. The study emphasizes the importance of careful interpretation of resistivity data in dam monitoring, particularly in the context of complex subsurface interactions and seasonal variations.
