DOI: https://doi.org/10.1007/s44288-026-00435-3
تاريخ النشر: 2026-02-18
المؤلف: Ayan Kumar Sarkar وآخرون
الموضوع الرئيسي: التحليل الجيولوجي والجيوكيميائي
نظرة عامة
تبحث الدراسة في تحليل الإجهاد داخل تجمع جونك في حزام الصخور الخضراء سوناخان، مع التركيز على أهمية الكتل كعلامات للإجهاد لفهم تشوه الصخور. تكشف الدراسة أن التجمع يظهر تشوهًا أكبر في القسم الأفقي، مع وجود تكتل خشن يتماشى مع الاتجاه العام لحزام الصخور الخضراء (NNW-SSE). تشير النتائج إلى وجود مكونات من القص النقي والقص البسيط، حيث يظهر تحليل الإجهاد النهائي ارتفاعًا في الشكل البيضاوي للكتل وتشوه إجهاد التسطح.
تصنف تحليل الدوران الحركي التجمع ضمن مجال قص عام، تحت ظروف ضغط متقاطع، والتي ترتبط بإحساس قص مائل يساري بسبب الحركة الرأسية للأعلى. تصنف الفحوصات البتروغرافية التحول على أنه من نوع facies greenschist، مما يشير إلى وجود بروتوليث طيني. تتماشى الدراسة مع الأبحاث السابقة التي أجراها يلابا وآخرون، والتي تفترض وجود ضغط أولي من الشمال إلى الجنوب على كراتون باستار تلاه دفع من الشرق إلى الغرب، مما يشير إلى أن تجمع جونك شهد تشوهًا لاحقًا. ومع ذلك، لا تزال توقيت وترابط هذا التشوه مع كراتون باستار غير محسومة في هذا التحليل.
مقدمة
يحد كراتون باستار، الواقع في الدرع الهندي المركزي، من الجنوب حوض جودافاري ومن الشمال الشرقي حوض ماهانادي، بينما تشكل المنطقة التكتونية الهندية الوسطى (CITZ) جزءًا من حزام ساتبورا المتحرك إلى الشمال. تتميز المنطقة الشرقية بحزام غات المتحرك الشرقي، بينما يتميز الجانب الغربي بفخاخ ديكان. يظهر حزام الصخور الخضراء سوناخان، الواقع عند الحافة الشمالية الشرقية لكراتون باستار، اتجاهًا هيكليًا من NNW-SSE. تشير تشابهه الجيولوجي والليثولوجي مع أحزمة الصخور الخضراء الأخرى من العصر النيوأركي إلى العصر الباليوبرتوذوي، في الجزء الجنوبي من كراتون باستار، إلى عمر مماثل، مدعومًا بموقعه الطبقي تحت مجموعة تشاتيسغاره السوبرغروبية من العصر الميزوبرتوذوي.
يتكون مجموعة سوناخان من ثلاث تشكيلات رئيسية: التشكيل السفلي باغمارا، الذي يتضمن مجموعة بركانية ثنائية النمط مع تشكيل الحديد المدمج (BIF) والكوارتز، بالإضافة إلى البازلت الوسادة؛ التشكيل الأوسط أرجوني، الذي يتميز بتسلسلات رسوبية من الرمال والتجمعات المشتقة من تشكيل باغمارا وgneiss بايا؛ والتشكيل العلوي بيلاري، الذي يتكون من صخور متطفلة وخارجية حمضية وقاعدية. يتكون القاعدة الأساسية لحزام الصخور الخضراء سوناخان من مجمع بايا الجناسي.
مناقشة
يتميز تجمع جونك، الواقع عند عدم التوافق بين تشكيلات باغمارا وأرجوني، بجسمه الواسع من الميتاكونغلوما، الذي يبلغ طوله حوالي 18 كم وعرضه يصل إلى 6 كم. يتكون من مجموعة متنوعة من الليثولوجيات الكتلية، بما في ذلك التشكيلات الجرانيتية وتشكيلات الحديد المدمج، يظهر التجمع درجة منخفضة من التحول تتماشى مع ظروف facies greenschist. يتماشى التكتل المرصود الذي يتجه من NNW-SSE مع الاتجاهات الهيكلية الإقليمية لحزام الصخور الخضراء سوناخان، مما يشير إلى تاريخ تشوه مشترك. يكشف تحليل حجم الكتل عن تباين كبير، مع هيمنة الكتل التي تتراوح بين 10-20 سم، ويقترح أن الأقسام الأفقية شهدت تشوهًا أكبر، كما يتضح من توزيعات نسبة الشكل.
تشير تحليل الإجهاد باستخدام طرق Rf/φ وFry إلى هيمنة تشوه التسطح، حيث يؤكد مخطط فلين هندسة الإجهاد البيضاوي. يكشف تحليل الدوران الحركي باستخدام طريقة توزيع البورفروكلاست الهايبرولي عن رقم دوران حركي قدره \(W_k = 0.917\)، مما يضع التشوه ضمن مجال قص عام ويدعم وجود ضغط متقاطع. تؤكد الملاحظات البتروغرافية هذه النتائج، مما يبرز ظروف التحول منخفضة الدرجة وعمليات التشوه المدعومة بالسوائل. بشكل جماعي، تشير هذه النتائج إلى أن تجمع جونك شهد تاريخ تشوه معقد يتميز بالانكماش من الشمال الغربي إلى الجنوب الشرقي، والقص البسيط اليساري، والرفع العمودي المحلي، مما يعكس التطور التكتوني لكراتون باستار خلال الفترة النيوأركية.
القيود
يتناول القسم المتعلق بالقيود القيود الكامنة في طرق تحليل الإجهاد النهائي. قد تشمل هذه القيود مشكلات تتعلق بدقة النماذج، والافتراضات التي تم إجراؤها أثناء التحليل، وتعقيد الحسابات المعنية. على سبيل المثال، قد تؤدي بعض التبسيطات إلى تناقضات بين التوقعات النظرية والملاحظات التجريبية، خاصة في السيناريوهات ذات التشوه الكبير أو غير الخطي.
بالإضافة إلى ذلك، قد يكون تحليل الإجهاد النهائي حساسًا لاختيار نماذج المواد والمعلمات، مما يمكن أن يؤثر على موثوقية النتائج. يبرز القسم الحاجة إلى النظر بعناية في هذه القيود عند تفسير النتائج ويقترح سبلًا للبحث المستقبلي لتعزيز قوة منهجيات تحليل الإجهاد النهائي.
DOI: https://doi.org/10.1007/s44288-026-00435-3
Publication Date: 2026-02-18
Author(s): Ayan Kumar Sarkar et al.
Primary Topic: Geological and Geochemical Analysis
Overview
The research investigates strain analysis within the Jonk Conglomerate of the Sonakhan Greenstone Belt, emphasizing the significance of clasts as strain markers for understanding rock deformation. The study reveals that the conglomerate exhibits greater deformation in the horizontal section, with a crude foliation aligning with the overall trend of the Greenstone Belt (NNW-SSE). The findings indicate the presence of both pure shear and simple shear components, with finite strain analysis demonstrating high ellipticity of clasts and flattening strain deformation.
Kinematic vorticity analysis categorizes the conglomerate within a general shear domain, specifically under transpression conditions, which is associated with oblique sinistral shear sense due to vertical upthrown movement. Petrographic examinations classify the metamorphism as greenschist facies, suggesting a pelitic protolith. The study aligns with previous research by Yellappa et al., which posits an initial N-S compression of the Bastar craton followed by E-W thrusting, indicating that the Jonk Conglomerate experienced later deformation. However, the timing and correlation of this deformation with the Bastar Craton remain unresolved in this analysis.
Introduction
The Bastar craton, located in the central Indian shield, is bordered by the Godavari graben to the south and the Mahanadi graben to the northeast, with the Central Indian Tectonic Zone (CITZ) forming part of the Satpura mobile belt to the north. The eastern region features the Eastern Ghat Mobile Belt, while the western side is characterized by the Deccan Trap. The Neoarchean Sonakhan Greenstone Belt, situated at the northeastern edge of the Bastar Craton, exhibits a NNW-SSE structural orientation. Its geological and lithological similarities to other Neoarchean to Paleoproterozoic greenstone belts in the southern Bastar craton suggest a comparable age, supported by its stratigraphic position beneath the Mesoproterozoic Chhattisgarh Supergroup.
The Sonakhan Group is composed of three primary formations: the lower Baghmara Formation, which includes a bimodal volcanic suite with Banded Iron Formation (BIF) and chert, as well as pillow basalts; the middle Arjuni Formation, characterized by sedimentary sequences of sandstones and conglomerates derived from the Baghmara Formation and the Baya gneiss; and the upper Bilari Formation, which consists of both acidic and basic intrusive and extrusive rocks. The underlying basement of the Sonakhan Greenstone Belt is formed by the Baya gneissic complex.
Discussion
The Jonk Conglomerate, located at the unconformity between the Baghmara and Arjuni Formations, is characterized by its extensive metaconglomerate body, measuring approximately 18 km in length and up to 6 km in width. Composed of a diverse range of clast lithologies, including granitic and banded iron formations, the conglomerate exhibits a low metamorphic grade consistent with greenschist facies conditions. The observed NNW-SSE trending foliation aligns with the regional structural trends of the Sonakhan Greenstone Belt, indicating a shared deformational history. Clast size analysis reveals significant variation, with a predominance of clasts measuring 10-20 cm, and suggests that the horizontal sections experienced greater deformation, as evidenced by aspect ratio distributions.
Strain analysis employing the Rf/φ and Fry methods indicates a predominance of flattening deformation, with the Flinn diagram confirming an oblate strain geometry. Kinematic vorticity analysis using the Porphyroclast Hyperbolic Distribution method reveals a kinematic vorticity number of \(W_k = 0.917\), placing the deformation within a general shear domain and supporting the presence of transpression. Petrographic observations further corroborate these findings, highlighting low-grade metamorphic conditions and fluid-assisted deformation processes. Collectively, these results suggest that the Jonk Conglomerate underwent a complex deformation history characterized by NW-SE shortening, sinistral simple shear, and localized vertical uplift, reflecting the tectonic evolution of the Bastar Craton during the Neoarchean period.
Limitations
The section on limitations addresses the constraints inherent in finite strain analysis methods. These limitations may include issues related to the accuracy of the models, the assumptions made during the analysis, and the computational complexity involved. For instance, certain simplifications may lead to discrepancies between theoretical predictions and experimental observations, particularly in highly nonlinear or large deformation scenarios.
Additionally, the finite strain analysis may be sensitive to the choice of material models and parameters, which can affect the reliability of the results. The section emphasizes the need for careful consideration of these limitations when interpreting findings and suggests avenues for future research to enhance the robustness of finite strain methodologies.
