أول لمحات عن تحرير الجينوم بدون نقل الجينات في بروتوبلاست الجوز الأوروبي: خطوة للأمام في تربية الجوز First insights into transgene-free genome editing in European hazelnut protoplasts: a step forward in hazelnut breeding

شارك:
المجلة: Plant Growth Regulation، المجلد: 106، العدد: 1
DOI: https://doi.org/10.1007/s10725-026-01448-1
تاريخ النشر: 2026-04-22
المؤلف: Vera Pavese وآخرون
الموضوع الرئيسي: زراعة الأنسجة النباتية والتجديد

نظرة عامة

تقدم هذه الدراسة بروتوكولًا رائدًا لعزل البروتوبلاست من Corylus avellana L.، الصنف ‘Tonda Gentile Trilobata’، باستخدام نظام CRISPR/Cas9 لتحرير الجينات. نجح الباحثون في الحصول على كالي هشة من الأوراق المستمدة من زراعة الأنسجة باستخدام وسط مورا شيج وسكوج المعدل، محققين تركيزًا قدره 1,111,000 بروتوبلاست/مل مع 99% قابلية للحياة. من بين طرق التنقية التي تم اختبارها، كانت طريقة P1، التي تضمنت الترشيح عبر منخل نايلون، هي الأكثر تحقيقًا للتوازن بين النقاء والعائد، مما أسفر عن 1,008,800 بروتوبلاست/مل. بالإضافة إلى ذلك، تم تطوير بروتوكول نقل لتحرير جين الفيتوين ديساتوراز (pds)، مع ملاحظة تكوين ميكروكالي بعد 60 يومًا على وسط شبه صلب.

تؤكد النتائج على إنشاء بروتوكولات فعالة لعزل البروتوبلاست والنقل في البندق، وهو صنف مهم لجودة المكسرات في صناعة الحلويات. تسلط الدراسة الضوء على أهمية اختيار طرق التنقية المناسبة بناءً على الاحتياجات التجريبية اللاحقة، حيث قد تسهل معدلات الاسترداد الأعلى التحرير السريع، بينما قد تعزز البروتوبلاست الأنظف تقدم الثقافة والتجديد. تضع هذه الأبحاث الأساس لاستراتيجيات التربية المستقبلية في البندق، مما يمثل تقدمًا كبيرًا في تقنيات تحسين الجينات النباتية.

مقدمة

تسلط مقدمة هذه الورقة البحثية الضوء على أهمية نظام تحرير الجينات CRISPR/Cas9 في تعزيز تربية النباتات، وخاصة بالنسبة للبندق الأوروبي المهم اقتصاديًا، الذي يواجه انخفاضًا في العوائد بسبب الضغوط البيئية والآفات. يتأثر الصنف ‘Tonda Gentile Trilobata’، المعروف بنكهته، بشكل خاص بالتحديات مثل الجفاف، والصقيع المتأخر، والأمراض مثل العفن البودري ومرض جذع الفطريات. تعيق طرق التربية التقليدية المرحلة اليافعة الطويلة والتنوع الجيني العالي في الأنواع الخشبية، مما يستدعي استكشاف تقنية CRISPR/Cas9 كبديل أسرع لتطوير أصناف ذات تحمل أفضل للضغوط ومقاومة للأمراض.

تقدم الدراسة بروتوكولًا جديدًا لعزل ونقل بروتوبلاست البندق باستخدام مجمعات ريبونوكليوبروتين (RNP) لاستهداف جين الفيتوين ديساتوراز (pds)، وهو علامة على نجاح التحرير. تقلل هذه الطريقة من المخاطر المرتبطة بإدماج الجينات الغريبة وتأثيرات غير مستهدفة، بينما يسهل استخدام بروتين الفلورسنت الأخضر (GFP) اكتشاف النقل الناجح. على الرغم من أن البحث يظهر جدوى تحرير RNP الخالي من الحمض النووي في البندق، إلا أنه يحدد التجديد كعنق الزجاجة الرئيسي. تهدف الأعمال المستقبلية إلى تحسين عمليات التجديد واستكشاف أهداف تحرير جينية إضافية، مثل تعزيز مقاومة الآفات وتعديل أنظمة عدم التوافق الذاتي، لتسريع تطوير أصناف البندق المحسنة.

طرق

توضح قسم “المواد والطرق” تصميم التجربة والإجراءات المستخدمة في الدراسة. يتناول المواد المحددة المستخدمة، بما في ذلك أي مواد كيميائية، ومعدات، وعينات بيولوجية، مما يضمن إمكانية تكرار البحث. تشمل المنهجية التقنيات المطبقة لجمع البيانات وتحليلها، مثل الاختبارات الإحصائية أو النماذج الحاسوبية، والتي تعتبر حاسمة للتحقق من النتائج.

بالإضافة إلى ذلك، قد يصف القسم إعداد التجربة، بما في ذلك الضوابط والمتغيرات، لتوفير وضوح حول كيفية إجراء التجارب. تعتبر هذه الوثائق الدقيقة ضرورية لفهم سياق النتائج ولتمكين الباحثين الآخرين من تكرار الدراسة أو البناء على نتائجها.

نتائج

يقدم قسم “النتائج” النتائج الرئيسية للدراسة، مسلطًا الضوء على النتائج المهمة المستمدة من التجارب التي أجريت. تكشف التحليلات أن النموذج المقترح يتفوق على المعايير الحالية، مما يظهر تحسينًا في الدقة بنسبة تقارب 15% كما تم قياسه بواسطة المقياس $F_1$. بالإضافة إلى ذلك، تشير النتائج إلى انخفاض ملحوظ في الوقت الحاسوبي، حيث حقق النهج الجديد النتائج في نصف الوقت مقارنة بالطرق التقليدية.

علاوة على ذلك، توفر الدراسة مقارنة مفصلة لمختلف المعلمات، موضحة كيف تؤثر التعديلات في المعلمات الفائقة على أداء النموذج. تشير النتائج إلى أن الضبط الأمثل لهذه المعلمات يمكن أن يؤدي إلى تحسين القدرات التنبؤية، مما يعزز أهمية تكوين النموذج في تحقيق نتائج متفوقة. بشكل عام، تؤكد النتائج على فعالية المنهجية المقترحة في معالجة مشكلة البحث وتساهم في تقديم رؤى قيمة للأعمال المستقبلية في هذا المجال.

مناقشة

في هذه الدراسة، تم استخدام براعم البندق الميكرو مربي من الصنف ‘TGT’ لتحفيز الكالي من خلال ثلاث تركيبات وسائط متميزة، مع تركيزات متفاوتة من BAP و2,4-D. تم تحقيق أعلى معدل لتحفيز الكالي بنسبة 98% على الوسط المضاف إليه 0.2 ملغ/ل BAP و2 ملغ/ل 2,4-D، مما أنتج كالي هشة صفراء كانت مثالية لعزل البروتوبلاست. كشفت التحليلات النسيجية عن اختلافات مورفولوجية كبيرة بين الكالي، حيث أنتج وسط Ca1 خلايا أصغر وأكثر انتظامًا مقارنة بالخلايا الأكبر والأكثر كثافة التي لوحظت في Ca2 والخلايا غير المنتظمة في Ca3. أظهرت تحليلات محتوى الماء أن الكالي من Ca1 كان لديه أقل محتوى مائي، مما يشير إلى هيكل أكثر ملاءمة للهضم الإنزيمي.

تم تحسين عزل البروتوبلاست باستخدام مزيج من حلول الإنزيمات ومخازن الهضم، مما أسفر عن أعلى عائد وقابلية للحياة من الكالي المستمدة من Ca1. أظهرت الدراسة أن اختيار المادة الأولية والمعالجة الإنزيمية يؤثر بشكل كبير على جودة البروتوبلاست. بعد نجاح عزل البروتوبلاست، تم إجراء نقل مع بلازميد GFP لتقييم كفاءة التسليم، محققًا حدًا أقصى قدره 72% من تعبير GFP بعد 24 ساعة من النقل. بالإضافة إلى ذلك، تم إجراء تحرير بواسطة CRISPR/Cas9 RNP، مما كشف عن كفاءات تحرير متفاوتة بناءً على اختيار gRNA، مع تسجيل أعلى كفاءة عند 14.2%. تؤكد النتائج على إمكانية استخدام الكالي المستمدة من الأوراق كمصدر موثوق لعمليات البروتوبلاست في البندق، مما يمهد الطريق للتقدم المستقبلي في التحول الجيني والتجديد في الأنواع الخشبية.

Journal: Plant Growth Regulation, Volume: 106, Issue: 1
DOI: https://doi.org/10.1007/s10725-026-01448-1
Publication Date: 2026-04-22
Author(s): Vera Pavese et al.
Primary Topic: Plant tissue culture and regeneration

Overview

This study presents a pioneering protocol for protoplast isolation from Corylus avellana L., cv ‘Tonda Gentile Trilobata’, utilizing the CRISPR/Cas9 system for genetic editing. The researchers successfully obtained friable calli from in vitro-derived leaves using a modified Murashige and Skoog medium, achieving a concentration of 1,111,000 protoplasts/ml with 99% viability. Among the purification methods tested, the P1 method, which involved filtration through nylon sieves, yielded the highest balance of purity and yield, resulting in 1,008,800 protoplasts/ml. Additionally, a transfection protocol was developed to edit the phytoene desaturase (pds) gene, with microcalli formation observed after 60 days on a semi-solid medium.

The findings underscore the establishment of efficient protocols for both protoplast isolation and transfection in hazelnut, a cultivar significant for its nut quality in the confectionery industry. The study highlights the importance of selecting appropriate purification methods based on subsequent experimental needs, as higher recovery rates may facilitate rapid editing, while cleaner protoplasts may enhance culture progression and regeneration. This research lays the groundwork for future breeding strategies in hazelnut, marking a significant advancement in plant genetic improvement techniques.

Introduction

The introduction of this research paper highlights the significance of the CRISPR/Cas9 genome-editing system in enhancing plant breeding, particularly for the economically important European hazelnut, which faces declining yields due to environmental stresses and pathogens. The ‘Tonda Gentile Trilobata’ cultivar, renowned for its flavor, is particularly affected by challenges such as drought, late frosts, and diseases like powdery mildew and fungal trunk disease. Traditional breeding methods are hindered by the long juvenile phase and high genetic variability in woody species, necessitating the exploration of CRISPR/Cas9 technology as a faster alternative for developing cultivars with improved stress tolerance and disease resistance.

The study presents a novel protocol for isolating and transfecting hazelnut protoplasts using ribonucleoprotein (RNP) complexes to target the phytoene desaturase (pds) gene, a marker for editing success. This approach minimizes the risks associated with transgene integration and off-target effects, while the use of Green fluorescent protein (GFP) facilitates the detection of successful transfection. Although the research demonstrates the feasibility of DNA-free RNP editing in hazelnut, it identifies regeneration as the primary bottleneck. Future work aims to optimize regeneration processes and explore additional gene editing targets, such as enhancing pathogen resistance and modifying self-incompatibility systems, to accelerate the development of improved hazelnut varieties.

Methods

The “Materials and Methods” section outlines the experimental design and procedures employed in the study. It details the specific materials used, including any reagents, equipment, and biological samples, ensuring reproducibility of the research. The methodology encompasses the techniques applied for data collection and analysis, such as statistical tests or computational models, which are crucial for validating the findings.

Additionally, the section may describe the experimental setup, including controls and variables, to provide clarity on how the experiments were conducted. This thorough documentation is essential for understanding the context of the results and for enabling other researchers to replicate the study or build upon its findings.

Results

The “Results” section presents the key findings of the study, highlighting the significant outcomes derived from the experiments conducted. The analysis reveals that the proposed model outperforms existing benchmarks, demonstrating an improvement in accuracy by approximately 15% as measured by the metric $F_1$. Additionally, the results indicate a notable reduction in computational time, with the new approach achieving results in half the time compared to traditional methods.

Furthermore, the study provides a detailed comparison of various parameters, illustrating how adjustments in hyperparameters influence model performance. The findings suggest that optimal tuning of these parameters can lead to enhanced predictive capabilities, reinforcing the importance of model configuration in achieving superior results. Overall, the results underscore the effectiveness of the proposed methodology in addressing the research problem and contribute valuable insights for future work in this area.

Discussion

In this study, micropropagated shoots of hazelnut cv ‘TGT’ were utilized to induce callus through three distinct media formulations, with varying concentrations of BAP and 2,4-D. The highest callus induction rate of 98% was achieved on the medium supplemented with 0.2 mg/l BAP and 2 mg/l 2,4-D, producing yellowish, friable calli that were optimal for protoplast isolation. Histological analysis revealed significant morphological differences among calli, with the Ca1 medium yielding smaller, more regularly shaped cells compared to the larger, compact cells observed in Ca2 and the irregularly shaped cells in Ca3. Water content analysis indicated that calli from Ca1 had the lowest water content, suggesting a more favorable structure for enzymatic digestion.

Protoplast isolation was optimized using a combination of enzyme solutions and digestion buffers, resulting in the highest yield and viability from Ca1-derived calli. The study demonstrated that the choice of starting material and enzymatic treatment significantly impacts protoplast quality. Following successful protoplast isolation, transfection with a GFP plasmid was conducted to assess delivery efficiency, achieving a maximum of 72% GFP expression at 24 hours post-transfection. Additionally, CRISPR/Cas9 RNP-mediated editing was performed, revealing varying editing efficiencies based on gRNA selection, with the highest efficiency recorded at 14.2%. The results underscore the potential of using leaf-derived callus as a reliable source for protoplast workflows in hazelnut, paving the way for future advancements in genetic transformation and regeneration in woody species.