DOI: https://doi.org/10.1016/j.epsl.2026.120030
تاريخ النشر: 2026-04-10
المؤلف: Cecilia Viti وآخرون
الموضوع الرئيسي: دراسات الزلازل والتكتونيات
نظرة عامة
تقدم هذه الدراسة تحليلًا شاملًا متعدد المقاييس لمنطقة صدع الدينار، مع التركيز بشكل خاص على صدع عادي داخل الدولوميت الثلاثي الذي ساهم في زلزال الدينار عام 1995 (Mw = 6.2). تحدد الأبحاث وجود أسطح مرآة مرتبطة بمنطقة الصدع الزلزالي، مما يشير إلى وجود صلة بعمليات مرتبطة بالزلازل. من خلال تحقيقات مفصلة تمتد من ملاحظات السطح إلى مجهر الإلكترون الناقل عالي الدقة (TEM) والتشتت الإلكتروني، تكشف الدراسة عن أدلة واضحة على التحلل الحراري للدولوميت عند حوالي 550 درجة مئوية. تؤدي هذه العملية إلى تشكيل حبيبات نانوية غنية بالمغنيسيوم ومواد ألومينوسيليكات غير متبلورة، والتي من المحتمل أن تكون ناتجة عن الفيلوسليكات الصغيرة الموجودة في الدولوميت المضيف.
تتوافق النتائج مع التجارب عالية السرعة على الدولوميت، التي تنتج تركيبات معدنية وهياكل نانوية مشابهة. ومن الجدير بالذكر أن هذه الدراسة تقدم أول دليل قاطع على تحلل الدولوميت المرتبط بمرآة على مستوى الصدع لهيكل زلزالي معروف، مما يشير إلى أن مثل هذه العمليات قد تحدث خلال أحداث الانزلاق الزلزالي. هذه الرؤية ذات صلة خاصة بفهم الآليات الجيولوجية التي تكمن وراء الزلازل التاريخية الكبيرة في المنطقة، بما في ذلك زلزال الدينار عام 1995.
مقدمة
تسلط مقدمة ورقة البحث الضوء على أهمية صخور الصدع في فهم ميكانيكا الزلازل وتحديد الصدوع الزلزالية. يتم التأكيد على الصدوع المستضيفة للكربونات كعوامل حاسمة لدراسة الظواهر المرتبطة بالزلازل، نظرًا لدورها في نشوء وانتشار الزلازل المدمرة على مستوى العالم. بينما تم توثيق مؤشرات الكسر الزلزالي الكلاسيكية، مثل البسودوتاكيلت، نادرًا في الصخور الكربونية، تعتبر ميزات أخرى مثل الصخور المحطمة، والكاتاكلستات المميعة، وأسطح الصدع المرآة (MFS) مؤشرات أكثر موثوقية للنشاط الزلزالي. يُستنتج أن MFS، التي تتميز بأسطحها اللامعة والناعمة، تشير إلى انزلاق سريع للصدع، على الرغم من أن تشكيلها يمكن أن يحدث أيضًا عند سرعات انزلاق أقل، مما يثير تساؤلات حول موثوقيتها كمؤشرات زلزالية.
تركز الدراسة على منطقة صدع الدينار (DFZ) في الأناضول، تركيا، وهي منطقة صدع زلزالي كربوني معروفة بنشاطها الزلزالي التاريخي، بما في ذلك زلزال الدينار عام 1995 (M_w = 6.2). تحقق الأبحاث في صخور الصدع وMFS المرتبطة بهذا النظام العادي للصدع، كاشفة أن هذه الميزات مرتبطة بعمليات التحلل الحراري الناتجة عن انزلاق الصدع. هذه النتيجة مهمة لأنها تقدم أدلة على خصائص التشوه في منطقة صدع زلزالي طبيعية تؤثر على الدولوميت، مما يؤكد الملاحظات المخبرية للتحلل الحراري المرتبط بالأحداث الزلزالية.
الطرق
استخدمت الأبحاث مجموعة شاملة من الطرق التجريبية للتحقيق في التركيب المعدني والخصائص الهيكلية للصخور المضيفة من منطقة صدع الدينار. تم إجراء تحليل حيود الأشعة السينية (XRD) باستخدام نظام Philips X’Pert PRO لتحديد التركيب المعدني الكلي. تم إجراء تحليلات بتروغرافية مفصلة على الشرائح الرقيقة من العينات، باستخدام مجهر الضوء المستقطب (OM)، ومجهر الإلكترون الماسح (SEM)، ومجهر الإلكترون الناقل (TEM). سهل SEM، المزود بمطياف الطاقة المشتت (EDS)، التحليل الكيميائي للعناصر الأثقل، بينما تم تحقيق التصوير باستخدام تقنيات الإلكترونات المرتدة والثانوية على كل من الأسطح المصقولة وغير المعالجة. قدمت تحقيقات TEM، التي أجريت باستخدام مجهر JEOL 2010، تصويرًا عالي الدقة وتحليلًا كيميائيًا، مما مكن من تحديد مراحل المعادن على مقاييس دون الميكرومتر.
بالإضافة إلى ذلك، تم إجراء تحليلات تشتت الإلكترونات المرتدة (EBSD) لتقييم توزيع حجم الحبيبات والتوجه المفضل للبلورات على سطح الصدع. تم إنشاء خرائط EBSD باستخدام SEM Tescan-Solaris FEG-FIB، مع ضبط معلمات محددة للجهد والتيار لتحسين جمع البيانات. لاحظت الدراسة تحديات في التصنيف الخاطئ بسبب التماثل الزائف في الدولوميت، مما أدى إلى تصنيف كل من الكربونات الغنية بالمغنيسيوم والكربونات الغنية بالكالسيوم ككالسيت مغنسي، بما يتماشى مع النتائج السابقة لـ Pearce وآخرون (2013). سمح هذا النهج متعدد المقاييس، الذي يدمج تقنيات المجهر المختلفة، بتوصيف شامل للهياكل الدقيقة والنانوية والتفاعلات المعدنية على سطح الصدع.
المناقشة
تظهر منطقة صدع الدينار (DFZ)، وهي هيكل زلزالي مهم في جنوب غرب تركيا، تاريخًا جيولوجيًا وزلزاليًا معقدًا يتميز بالانتقال من التكتونيات الضاغطة إلى التكتونيات الممتدة حوالي 25 مليون سنة. شهدت منطقة الصدع تغييرات حركية، حيث عملت في البداية كصدع نقل خلال الفترة الميوسينية المتأخرة-البليوسينية، ثم أعيد تنشيطها كصدع عادي في العصر الرباعي، مما ساهم في تشكيل حوض الدينار ومجمع جولوك البركاني. يتم التأكيد على النشاط الزلزالي لـ DFZ من خلال زلزال الدينار المدمر في 1 أكتوبر 1995 (Mw = 6.2)، الذي أسفر عن خسائر كبيرة وأضرار هيكلية، مما يبرز قدرة الصدع على توليد زلازل كبيرة.
تكشف التحليلات الميكروهيكلية لصخر الدولوميت المضيف وسطح الصدع المرآة (MFS) عن أدلة على التحلل الحراري الناتج عن الزلازل، مع ميزات مميزة مثل حدود الحبيبات غير المنتظمة، والعديد من المسام، والفقاعات التي تشير إلى التسخين الناتج عن الاحتكاك. تحدد الدراسة طبقة نانوية عند MFS، مما يشير إلى منطقة انزلاق متحللة حراريًا تتميز بحبيبات دولوميت مشدودة بشدة وبلورات كالسيت نانوية غنية بالمغنيسيوم. تؤكد النتائج على ندرة توثيق إزالة الكربون من الدولوميت في البيئات الطبيعية للصدع وتقترح أنه يجب اعتبار مؤشرات متعددة، بما في ذلك الكاتاكلستات المميعة ومرآة الصدع، بشكل جماعي لتحديد التحلل الحراري الناتج عن الزلازل في صدوع الدولوميت. تسهم الأبحاث في فهم آليات سلوك الصدع خلال الأحداث الزلزالية والآثار المترتبة على علم المعادن واستقرار صخور الصدع.
DOI: https://doi.org/10.1016/j.epsl.2026.120030
Publication Date: 2026-04-10
Author(s): Cecilia Viti et al.
Primary Topic: earthquake and tectonic studies
Overview
This study presents a comprehensive multiscale analysis of the Dinar fault zone, specifically examining a normal fault within Triassic dolostone that contributed to the 1995 Dinar earthquake (Mw = 6.2). The research identifies the presence of mirror surfaces linked to the seismogenic fault zone, indicating a connection to earthquake-related processes. Through detailed investigations spanning from outcrop observations to high-resolution transmission electron microscopy (TEM) and electron diffraction, the study reveals clear evidence of thermal decomposition of dolomite at approximately 550 °C. This process results in the formation of magnesium-rich calcite nanograins and amorphous aluminosilicate materials, likely originating from minor phyllosilicates present in the host dolostones.
The findings align with high-velocity experiments on dolomite, which yield similar mineralogical compositions and nanostructures. Notably, this case study provides the first definitive evidence of dolomite decomposition associated with a mirror along the fault plane of a recognized seismogenic structure, suggesting that such processes may occur during coseismic slip events. This insight is particularly relevant to understanding the geological mechanisms underlying significant historical earthquakes in the region, including the 1995 Dinar earthquake.
Introduction
The introduction of the research paper highlights the significance of fault rocks in understanding earthquake mechanics and identifying seismogenic faults. Carbonate-hosted faults are emphasized as critical for studying earthquake-related phenomena, given their role in the nucleation and propagation of destructive earthquakes globally. While classic indicators of co-seismic rupture, such as pseudotachylite, have been rarely documented in carbonate rocks, other features like shattered rocks, fluidized cataclasites, and mirror fault surfaces (MFS) are considered more reliable indicators of seismic activity. MFS, characterized by their shiny, smooth surfaces, are inferred to indicate fast fault slip, although their formation can also occur at lower slip velocities, raising questions about their reliability as seismic indicators.
The study focuses on the Dinar Fault Zone (DFZ) in Anatolia, Türkiye, a carbonate seismogenic fault zone known for its historical seismic activity, including the 1995 Dinar earthquake (M_w = 6.2). The research investigates fault rocks and MFS associated with this normal fault system, revealing that these features are linked to thermal decomposition processes induced by fault slip. This finding is significant as it provides evidence of deformation characteristics in a natural seismogenic fault zone affecting dolostone, corroborating laboratory observations of thermal decomposition associated with seismic events.
Methods
The research employed a comprehensive suite of experimental methods to investigate the mineralogical composition and structural characteristics of host rocks from the Dinar Fault Zone. X-ray diffraction (XRD) was conducted using a Philips X’Pert PRO system to determine the bulk mineral composition. Detailed petrographic analyses were performed on thin sections of the samples, utilizing polarized light optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The SEM, equipped with an energy dispersive spectrometer (EDS), facilitated chemical analysis of heavier elements, while imaging was achieved using backscattered and secondary electron techniques on both polished and untreated surfaces. TEM investigations, conducted with a JEOL 2010 microscope, provided ultra-high resolution imaging and chemical analysis, enabling the identification of mineral phases at submicrometer scales.
Additionally, electron backscatter diffraction (EBSD) analyses were performed to assess grain size distribution and crystal preferred orientation on the fault surface. EBSD maps were generated using a Tescan-Solaris FEG-FIB SEM, with specific parameters set for voltage and beam current to optimize data acquisition. The study noted challenges with misindexing due to pseudosymmetry in dolomite, leading to the classification of both Mg-rich and Ca-rich carbonates as magnesian calcite, in line with previous findings by Pearce et al. (2013). This multiscale approach, integrating various microscopy techniques, allowed for a thorough characterization of the micro-nanostructures and mineral reactions at the fault surface.
Discussion
The Dinar Fault Zone (DFZ), a significant seismogenic structure in southwestern Türkiye, exhibits a complex geological and seismotectonic history characterized by a transition from compressional to extensional tectonics around 25 Ma. The fault zone has undergone kinematic changes, initially functioning as a transfer fault during the Late Miocene-Pliocene and later reactivating as a normal fault in the Quaternary, contributing to the formation of the Dinar Basin and the Gölcük volcanic complex. The DFZ’s seismic activity is underscored by the destructive Dinar earthquake of October 1, 1995 (Mw = 6.2), which resulted in significant casualties and structural damage, highlighting the fault’s potential for generating large earthquakes.
Microstructural analyses of the dolostone host rock and the mirror fault surface (MFS) reveal evidence of seismic-induced thermal decomposition, with distinct features such as anhedral grain boundaries, abundant pores, and vesicles indicative of frictional heating. The study identifies a nanocrystalline layer at the MFS, suggesting a thermally decomposed slip zone characterized by highly strained dolomite grains and Mg-rich calcite nanocrystals. The findings emphasize the rarity of documented dolomite decarbonation in natural fault settings and propose that multiple indicators, including fluidized cataclasite and fault mirrors, should be considered collectively to identify seismic-induced thermal decomposition in dolostone faults. The research contributes to understanding the mechanisms of fault behavior during seismic events and the implications for fault rock mineralogy and stability.
