إعادة بناء في الموقع المستحثة بالضوء لقطب ضوئي TiO2/CoNi-LDH المعدل بـ CoOOH: تحقيق حماية كاثودية ضوئية كهربائية ممتازة وتعطيل بكتيري Light-induced in situ reconstruction of CoOOH-modified TiO2/CoNi-LDH heterojunction photoanode: achieving excellent photoelectrochemical cathodic protection and bacterial inactivation

شارك:
المجلة: Light Science & Applications، المجلد: 15، العدد: 1
DOI: https://doi.org/10.1038/s41377-026-02328-z
PMID: https://pubmed.ncbi.nlm.nih.gov/42115629
تاريخ النشر: 2026-05-11
المؤلف: Meiqi Wang وآخرون
الموضوع الرئيسي: تحفيز ضوء TiO2 وخلايا الشمس

نظرة عامة

تناقش هذه القسم تحديات التآكل والتلوث البيولوجي في البيئات البحرية، مع تسليط الضوء على قيود طرق الحماية التقليدية، التي غالبًا ما تتضمن استهلاكًا عاليًا للطاقة وتلوثًا بيئيًا. تقدم الأبحاث تقنية الحماية الكاثودية الضوئية الكهروكيميائية (PECCP)، التي تستفيد من الطاقة الشمسية لتسهيل نقل الإلكترونات الناتجة عن الضوء من أشباه الموصلات إلى الأسطح المعدنية، مما يوفر نهجًا أكثر استدامة لحماية التآكل.

في هذه الدراسة، تم تطوير أنود ضوئي مركب TiO$_2$/CoNi-LDH باستخدام تقنيات الهيدروحرارية والترسيب الكهربائي. تشير النتائج إلى أنه تحت الإضاءة، undergo CoNi-LDH إعادة بناء في الموقع لتشكيل CoOOH، الذي يعمل كعامل مساعد. أظهر هذا المركب حماية كاثودية ضوئية كهروكيميائية ملحوظة، محققًا تحولًا في الجهد قدره 380 مللي فولت للفولاذ المقاوم للصدأ 304 المترابط في بيئة مياه البحر المحاكية. بالإضافة إلى ذلك، أظهر خصائص مضادة للبكتيريا ملحوظة، حيث قام بإبطال نشاط بكتيريا Pseudomonas aeruginosa تمامًا خلال 120 دقيقة. تشير التحليلات الهيكلية والنظرية إلى أن تشكيل CoOOH يعزز نقل الشحنات بين الواجهات ويعزز توليد الأنواع التفاعلية من الأكسجين، مما يحسن من قدرات مقاومة التآكل والتلوث البيولوجي. تقدم هذه الأبحاث استراتيجية واعدة لإنشاء مواد حماية بحرية متكاملة تتمتع بمتانة محسنة ضد التآكل والتلوث البيولوجي.

مقدمة

تتناول مقدمة ورقة البحث القضية الحرجة لتآكل المعادن، لا سيما في البيئات البحرية حيث تسرع الملوحة العالية والرطوبة عمليات التدهور. غالبًا ما تتضمن طرق مقاومة التآكل التقليدية، مثل الطلاءات والأنودات التضحية، استهلاكًا عاليًا للطاقة ومخاوف بيئية. في المقابل، تظهر الحماية الكاثودية الضوئية الكهروكيميائية (PECCP) كبديل واعد، حيث تستخدم الطاقة الشمسية لتعزيز حالة المعادن الغنية بالإلكترونات، مما يوفر حماية فعالة ضد التآكل مع تقليل التأثير البيئي.

تسلط الورقة الضوء على التقدمات الأخيرة في تحسين الأقطاب الضوئية لـ PECCP، بما في ذلك تطوير الهياكل غير المتجانسة القائمة على TiO₂ والهيدروكسيدات المزدوجة الطبقات (LDHs) التي تحسن من امتصاص الضوء وفصل الشحنات. ومن الجدير بالذكر أن الدراسة تقدم أنود ضوئي غير متجانس TiO₂/CoNi-LDH جديد يخضع لإعادة بناء ديناميكية في الموقع عند تحفيز الضوء، مما يحول Co(OH)₂ إلى المرحلة النشطة CoOOH. يعزز هذا التحول بشكل كبير من كينتيك فصل الشحنات وفعالية مضادة للبكتيريا ضد Pseudomonas aeruginosa، محققًا إبطال نشاط البكتيريا بالكامل خلال 120 دقيقة. تؤكد النتائج على إمكانية هذا النهج المبتكر في معالجة تحديات التآكل والتلوث البيولوجي في البيئات المعقدة في الوقت نفسه.

الطرق

في هذا القسم، يوضح المؤلفون المواد والطرق المستخدمة في تجاربهم. كانت جميع المواد الكيميائية من الدرجة التحليلية وتم استخدامها دون مزيد من التنقية. شملت المواد الكيميائية الأساسية الإيثانول المطلق ($\text{C}_2\text{H}_5\text{OH}$)، كلوريد الصوديوم ($\text{NaCl}$)، حمض الهيدروكلوريك ($\text{HCl}$)، وكلوريد البوتاسيوم ($\text{KCl}$)، الموردة من شركة Sinopharm Chemical Reagent Co., Ltd. بالإضافة إلى ذلك، تم الحصول على إيزوبروبانول التيتانيوم (IV) ($\text{C}_{12}\text{H}_{28}\text{O}_4\text{Ti}$)، نترات الكوبالت (II) سداسية الماء ($\text{Co(NO}_3\text{)}_2 \cdot 6\text{H}_2\text{O}$)، ونترات النيكل (II) سداسية الماء ($\text{Ni(NO}_3\text{)}_2 \cdot 6\text{H}_2\text{O}$) من شركة Macklin Biochemical Technology Co., Ltd. (شنغهاي). تؤكد هذه الاختيار الدقيق للمواد الكيميائية عالية النقاء على صرامة تصميم التجربة.

النتائج

تظهر نتائج الدراسة فعالية مركبات TiO₂/CoNi-LDH للتطبيقات الضوئية الكهروكيميائية، لا سيما في البيئات البحرية. عند غمرها في محلول NaCl بتركيز 3.5 وزني %، أظهر أنود TiO₂/CoNi-LDH الضوئي، المحسن عند جهد ترسيب قدره -1.7 فولت، انخفاضًا كبيرًا في الجهد الناتج عن الضوء قدره حوالي 380 مللي فولت، متفوقًا على كل من TiO₂ النقي وCoNi-LDH. يُعزى هذا التحسين إلى تحسين فصل ونقل حاملات الشحنة، كما يتضح من أعلى كثافة تيار ضوئي تبلغ ~14 ميكرو أمبير سم⁻² لوحظت للمركب. بالإضافة إلى ذلك، أظهر المركب مقاومة فائقة للتآكل، حيث حافظ على سطح أملس على الفولاذ المقاوم للصدأ 304 بعد 24 ساعة من الغمر، بينما أظهر الفولاذ المقاوم للصدأ 304 غير المحمي تآكلًا كبيرًا.

في اختبارات القتل البكتيري ضد Pseudomonas aeruginosa، حقق مركب TiO₂/CoNi-LDH معدل تعقيم بنسبة 100% بعد 120 دقيقة من الإضاءة الشمسية المحاكية، متفوقًا بشكل كبير على TiO₂ النقي، الذي حقق فقط معدل تعقيم بنسبة 29%. كما سلطت الدراسة الضوء على التغيرات الهيكلية والتركيبية للمواد بعد الإضاءة، كاشفةً أن الأوراق النانوية CoNi-LDH خضعت لتغيرات شكلية عززت من مساحة سطحها النشطة. أكدت النتائج من تحليل حيود الأشعة السينية (XRD)، المجهر الإلكتروني الماسح (SEM)، وتحليل طيف الإلكترون بالأشعة السينية (XPS) على نجاح التخليق وآليات نقل الشحنات الفعالة داخل المركب، مما يثبت أنه مرشح واعد للتطبيقات ذات الوظائف المزدوجة في الحماية الكاثودية والنشاط المضاد للبكتيريا.

المناقشة

في هذه الدراسة، تم تطوير أنود ضوئي غير متجانس TiO$_2$/CoNi-LDH معدل بـ CoOOH، مما يظهر فعالية الحماية الكاثودية الضوئية الكهروكيميائية وخصائص مقاومة التلوث البيولوجي. تشير النتيجة الرئيسية إلى أن التحول في الموقع لـ CoNi-LDH إلى CoOOH تحت الإضاءة يعمل كعامل مساعد فعال، مما يعزز نقل واستهلاك الثقوب. يؤدي هذا التحول، بالتزامن مع الهيكل غير المتجانس، إلى تقليل كبير في جهد التفاعل الزائد وتحول سلبي ملحوظ قدره 380 مللي فولت في الجهد الكاثودي للفولاذ المقاوم للصدأ 304. بالإضافة إلى ذلك، أدى زيادة توليد الأنواع التفاعلية من الأكسجين إلى إبطال نشاط Pseudomonas aeruginosa بالكامل خلال 120 دقيقة من الإضاءة، مما يبرز إمكانية هذا الهيكل المعاد بناؤه ديناميكيًا لإنشاء أنظمة حماية ذكية تجمع بين الحماية الكاثودية وقدرات مضادة للبكتيريا واسعة الطيف.

على الرغم من الخصائص الوظيفية المزدوجة الواعدة التي لوحظت في ظروف المختبر، لا يزال يتعين تقييم الاستقرار الكيميائي طويل الأمد للمادة تحت ظروف متعددة العوامل في البيئات البحرية الحقيقية. تعتبر أداء الأنود الضوئي تحت ظروف الإضاءة المتقلبة والتلوث البيولوجي في مياه البحر الطبيعية أمرًا حاسمًا لتطبيقه العملي. ستركز الأبحاث المستقبلية على اختبارات التعرض الميداني لتقييم جدوى هذه التقنية لتطبيقات على نطاق صناعي، مما يضمن قوتها وفعاليتها في البيئات البحرية المعقدة.

Journal: Light Science & Applications, Volume: 15, Issue: 1
DOI: https://doi.org/10.1038/s41377-026-02328-z
PMID: https://pubmed.ncbi.nlm.nih.gov/42115629
Publication Date: 2026-05-11
Author(s): Meiqi Wang et al.
Primary Topic: TiO2 Photocatalysis and Solar Cells

Overview

The section discusses the challenges of corrosion and biofouling in marine environments, highlighting the limitations of traditional protection methods, which often involve high energy consumption and environmental pollution. The research introduces photoelectrochemical cathodic protection (PECCP) technology, which harnesses solar energy to facilitate the transfer of photogenerated electrons from semiconductors to metal surfaces, offering a more sustainable approach to corrosion protection.

In this study, a TiO$_2$/CoNi-LDH composite photoanode was developed using hydrothermal and electrodeposition techniques. The findings indicate that under illumination, CoNi-LDH undergoes in situ reconstruction to form CoOOH, which acts as a cocatalyst. This composite demonstrated significant photoelectrochemical cathodic protection, achieving a potential shift of 380 mV for coupled 304 stainless steel in a simulated seawater environment. Additionally, it exhibited remarkable antibacterial properties, completely inactivating Pseudomonas aeruginosa within 120 minutes. Structural characterization and theoretical analyses suggest that the formation of CoOOH enhances interfacial charge transfer and promotes reactive oxygen species generation, thereby improving both anti-corrosion and anti-biofouling capabilities. This research presents a promising strategy for creating integrated marine protective materials with enhanced durability against corrosion and biofouling.

Introduction

The introduction of the research paper addresses the critical issue of metal corrosion, particularly in marine environments where high salinity and humidity accelerate degradation processes. Traditional anti-corrosion methods, such as coatings and sacrificial anodes, often involve high energy consumption and environmental concerns. In contrast, photoelectrochemical cathodic protection (PECCP) emerges as a promising alternative, utilizing solar energy to enhance the electron-rich state of metals, thereby providing effective corrosion protection while minimizing ecological impact.

The paper highlights recent advancements in optimizing photoelectrodes for PECCP, including the development of TiO₂-based heterojunctions and layered double hydroxides (LDHs) that improve light absorption and charge separation. Notably, the study presents a novel TiO₂/CoNi-LDH heterojunction photoanode that undergoes in situ dynamic reconstruction upon photoexcitation, transforming Co(OH)₂ into the active phase CoOOH. This transformation significantly enhances charge separation kinetics and antibacterial efficacy against Pseudomonas aeruginosa, achieving complete bacterial inactivation within 120 minutes. The findings underscore the potential of this innovative approach to simultaneously address corrosion and biofouling challenges in complex environments.

Methods

In this section, the authors detail the materials and methods utilized in their experiments. All reagents were of analytical grade and were employed without further purification. The primary chemicals included absolute ethanol ($\text{C}_2\text{H}_5\text{OH}$), sodium chloride ($\text{NaCl}$), hydrochloric acid ($\text{HCl}$), and potassium chloride ($\text{KCl}$), sourced from Sinopharm Chemical Reagent Co., Ltd. Additionally, titanium (IV) isopropoxide ($\text{C}_{12}\text{H}_{28}\text{O}_4\text{Ti}$), cobalt (II) nitrate hexahydrate ($\text{Co(NO}_3\text{)}_2 \cdot 6\text{H}_2\text{O}$), and nickel (II) nitrate hexahydrate ($\text{Ni(NO}_3\text{)}_2 \cdot 6\text{H}_2\text{O}$) were procured from Macklin Biochemical Technology Co., Ltd. (Shanghai). This careful selection of high-purity reagents underscores the rigor of the experimental design.

Results

The results of the study demonstrate the effectiveness of TiO₂/CoNi-LDH composites for photoelectrochemical applications, particularly in marine environments. When immersed in a 3.5 wt% NaCl solution, the TiO₂/CoNi-LDH composite photoelectrode, optimized at a deposition potential of -1.7 V, exhibited a significant photo-induced potential drop of approximately 380 mV, outperforming both pure TiO₂ and CoNi-LDH. This enhancement is attributed to improved charge carrier separation and transport, as evidenced by the highest photocurrent density of ~14 µA cm⁻² observed for the composite. Additionally, the composite demonstrated superior corrosion resistance, maintaining a smooth surface on 304 SS after 24 hours of immersion, while unprotected 304 SS showed significant corrosion.

In bactericidal tests against Pseudomonas aeruginosa, the TiO₂/CoNi-LDH composite achieved a 100% sterilization rate after 120 minutes of simulated solar illumination, significantly outperforming pure TiO₂, which only achieved a 29% sterilization rate. The study also highlighted the structural and compositional changes of the materials post-illumination, revealing that the CoNi-LDH nanosheets underwent morphological alterations that enhanced their active surface area. The results from X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analyses confirmed the successful synthesis and effective charge transfer mechanisms within the composite, establishing it as a promising candidate for dual-functional applications in cathodic protection and antibacterial activity.

Discussion

In this study, a CoOOH-modified TiO$_2$/CoNi-LDH heterojunction photoanode was developed, showcasing effective photoelectrochemical cathodic protection and anti-biofouling properties. The primary finding indicates that the in situ transformation of CoNi-LDH into CoOOH under illumination serves as a proficient co-catalyst, enhancing hole transfer and consumption. This transformation, in conjunction with the heterojunction, leads to a significant reduction in reaction overpotential and a notable negative shift of 380 mV in the cathodic potential of 304 stainless steel (SS). Additionally, the increased generation of reactive oxygen species resulted in the complete inactivation of Pseudomonas aeruginosa within 120 minutes of illumination, highlighting the potential of this dynamically reconstructed heterostructure for creating intelligent protective systems that combine cathodic protection with broad-spectrum antibacterial capabilities.

Despite the promising dual-functional characteristics observed in laboratory conditions, the long-term chemical stability of the material under multifactorial conditions in real marine environments remains to be evaluated. The performance of the photoanode under fluctuating illumination and biofouling conditions in natural seawater is particularly critical for its practical application. Future research will focus on field exposure tests to assess the feasibility of this technology for industrial-scale applications, ensuring its robustness and effectiveness in complex marine settings.