إعادة تدوير السيليكون من الألواح الشمسية في نهاية عمرها إلى محفز غير متجانس لتفاعل ميزوركي-هيك Upcycling silicon from End-of-Life photovoltaic panels to a heterogeneous catalyst for the Mizoroki–Heck cross-coupling

شارك:
المجلة: Green Chemistry، المجلد: 28، العدد: 17
DOI: https://doi.org/10.1039/d6gc00369a
تاريخ النشر: 2026-01-01
المؤلف: Giulia Brufani وآخرون
الموضوع الرئيسي: تفاعلات الربط المتقاطع الحفاز

نظرة عامة

تقدم البحث استراتيجية جديدة لإدارة الحجم المتزايد من نفايات الألواح الشمسية (EoL) من خلال إعادة استخدام السيليكون المستعاد من الألواح الشمسية المهملة. مع توقعات تشير إلى أن نفايات الألواح الشمسية العالمية قد تصل إلى 8 ملايين طن بحلول عام 2030، يبرز الدراسة الحاجة الملحة لطرق إعادة التدوير الفعالة. يقترح المؤلفون استخدام هذا السيليكون المستعاد كدعم غير متجانس لأنظمة التحفيز القائمة على جزيئات البالاديوم (Pd)، موضحين أن المحفز الجديد Pd/Si_EoLPV يظهر أداءً تحفيزيًا في تفاعل ميزوركي-هيك يقارن أو حتى يتجاوز أداء المحفزات التقليدية Pd/C. حقق المحفز عدد دوران (TON) قدره 5820 وتردد دوران (TOF) قدره 582 h⁻¹، مع تسرب بالاديوم ضئيل أقل من 3 جزء في المليون على مدى ست جولات متتالية.

تسلط النتائج الضوء على إمكانيات إعادة تدوير السيليكون من الدرجة الشمسية، الذي يعتبر غير قابل للاستخدام مرة أخرى في التطبيقات الضوئية، إلى محفز فعال ومستقر. نجح محفز Pd/Si_EoLPV في تسهيل تخليق 22 منتجًا مختلفًا، بما في ذلك الوسائط للمواد الصيدلانية، مع الحفاظ على قابلية إعادة تدوير عالية وعائد معزول ممتاز قدره 97%. لا يوفر هذا العمل بديلاً مستدامًا لمحفزات Pd/C التقليدية فحسب، بل يقدم أيضًا نهجًا قيمًا لتمديد دورة حياة مادة حيوية، مما يعالج كل من القضايا البيئية وإدارة الموارد في سياق تزايد نفايات الألواح الشمسية EoL.

مقدمة

تسلط المقدمة الضوء على الدور المحوري للطاقة الشمسية في التحول العالمي نحو الطاقة المتجددة، حيث شهدت تقنية الألواح الشمسية (PV) نموًا ملحوظًا. في عام 2024، وصلت التركيبات العالمية للألواح الشمسية إلى رقم قياسي قدره 597 جيجاوات، مع توقعات تشير إلى زيادة إلى أكثر من 1630 جيجاوات بحلول عام 2030 و4500 جيجاوات بحلول عام 2050. ومع ذلك، فإن هذا النمو يطرح تحديات بيئية كبيرة، حيث تؤدي متوسط عمر وحدات الألواح الشمسية إلى حجم نفايات متوقع يبلغ حوالي 8 ملايين طن بحلول عام 2030، ويتصاعد إلى 60-78 مليون طن بحلول عام 2050. تهدف توجيهات الاتحاد الأوروبي بشأن النفايات الكهربائية والإلكترونية (WEEE) إلى التخفيف من هذه القضايا من خلال تعزيز إعادة التدوير وإدارة النفايات بشكل صحيح، مما يبرز الحاجة إلى استراتيجيات الاقتصاد الدائري في صناعة الألواح الشمسية.

تناقش هذه الفقرة أيضًا تكوين نفايات الألواح الشمسية (EoL)، والتي تشمل مواد متنوعة مثل الزجاج والبوليمرات والمعادن. تشير تقييمات دورة الحياة إلى أن إعادة تدوير الألواح الشمسية EoL يمكن أن تحافظ على الطاقة، وتقلل من انبعاثات ثاني أكسيد الكربون، وتخفف من استنزاف الموارد. على الرغم من الأعباء الاقتصادية والبيئية المرتبطة بإنتاج السيليكون، فإن استراتيجيات إعادة التدوير الفعالة يمكن أن تعزز الاستدامة في قطاع الألواح الشمسية. يتم استكشاف طرق إعادة التدوير المختلفة، بما في ذلك العمليات الميكانيكية والحرارية والكيميائية، كل منها له مزاياه وتحدياته. يقدم البحث نهجًا جديدًا لإعادة استخدام السيليكون من وحدات الألواح الشمسية EoL في نظام تحفيز بالاديوم (Pd) لتطبيقات في التخليق العضوي، وخاصة تفاعل ميزوركي-هيك، باستخدام γ-فاليرولاكتون المشتق من الكتلة الحيوية كوسيط تفاعل ليتماشى مع الممارسات المستدامة. يبرز هذا الاستخدام المبتكر للسيليكون المعاد تدويره إمكانياته في التحفيز، مما يقدم طريقًا واعدًا لمعالجة كل من إدارة النفايات واستعادة الموارد في صناعة الطاقة الشمسية.

طرق

تحدد القسم التجريبي من ورقة البحث المنهجيات المستخدمة للتحقيق في الأسئلة البحثية المطروحة. يوضح تصميم التجارب، بما في ذلك اختيار المواد، وإعداد الأجهزة، والبروتوكولات المتبعة لضمان قابلية التكرار وموثوقية النتائج. يتم إعطاء اهتمام خاص للمتغيرات الضابطة والأساليب الإحصائية المستخدمة في تحليل البيانات، والتي تعتبر حاسمة للتحقق من النتائج.

بالإضافة إلى ذلك، قد يصف القسم تقنيات أخذ العينات والمعايير المستخدمة لاختيار المشاركين، إذا كان ذلك مناسبًا، بالإضافة إلى أي اعتبارات أخلاقية تم أخذها في الاعتبار أثناء التجربة. من المتوقع أن توفر النتائج المستخلصة من هذه التجارب رؤى حول الفرضيات المختبرة، مما يساهم في الفهم العام للموضوع.

نتائج

في هذه الدراسة، تم تطوير محفز من السيليكون البلوري المستخرج من وحدات الألواح الشمسية (EoL)، محققًا نقاءً قدره 86 wt% بعد سلسلة من خطوات المعالجة بما في ذلك الفصل، والتسرب، والطحن. تم استخدام مسحوق السيليكون الناتج (Si_EoLPV) لتثبيت جزيئات البالاديوم (Pd) عبر طريقة بوليول، مع مقارنة خصائص المحفز بتلك المصنوعة من السيليكون التجاري من الدرجة المعدنية. أظهرت كلا المحفزين أحجام جزيئات Pd مشابهة (3.6 ± 1.1 نانومتر لـ Pd/Si و3.8 ± 1.2 نانومتر لـ Pd/Si_EoLPV) وتوزيع حالة أكسدة Pd قابل للمقارنة، مما يشير إلى أن مصدر السيليكون لم يؤثر بشكل كبير على الخصائص الهيكلية لجزيئات Pd.

تم تقييم الأداء التحفيزي لمحفز Pd/Si_EoLPV في تفاعل ميزوركي-هيك، حيث أظهر كفاءة متفوقة في وجود المذيب الحيوي غاما-فاليرولاكتون (GVL)، محققًا تحويلًا كاملاً لليودوبنزين. بالمقابل، أدت المذيبات الأخرى والقواعد غير العضوية إلى تحويلات أقل. من الجدير بالذكر أن تسرب Pd من المحفز القائم على السيليكون كان أقل بكثير (2.6-2.7 جزء في المليون) مقارنةً بتسرب المحفز Pd/C المتاح تجاريًا (8.9 جزء في المليون)، مما يشير إلى تعزيز الاستقرار والاستدامة للمحفز المستمد من السيليكون. تؤكد هذه النتائج على إمكانيات استخدام السيليكون من وحدات الألواح الشمسية EoL كدعم فعال وصديق للبيئة لجزيئات Pd في التطبيقات التحفيزية.

مناقشة

في هذه الدراسة، يقدم المؤلفون استراتيجية مبتكرة لإعادة استخدام السيليكون المستعاد من الألواح الشمسية في نهاية عمرها، مستخدمين إياه كدعم لمحفز قائم على البالاديوم (Pd/Si_EoLPV). تم تخليق المحفز من خلال سلسلة من العمليات بما في ذلك الفصل، والتسرب لإزالة الألمنيوم والفضة، والطحن عالي الطاقة. أظهر المحفز الناتج Pd/Si_EoLPV كفاءة تحفيزية في تفاعل اقتران ميزوركي-هيك باستخدام غاما-فاليرولاكتون (GVL) كمذيب أخضر، محققًا عدد دوران (TON) قدره 5820 وتردد دوران (TOF) قدره 582 h⁻¹. أظهر المحفز قابلية إعادة تدوير ممتازة، مع الحفاظ على أداء مستقر على مدى ست جولات متتالية مع تسرب بالاديوم أقل من 3 جزء في المليون.

تسلط الدراسة الضوء على تعددية استخدام المحفز، حيث نجح في تسهيل تخليق 22 ركيزة مختلفة، بما في ذلك الوسائط للتطبيقات الصيدلانية مثل ريلبيفيرين ومثبطات Lp-PLA₂. على نطاق جرام، حافظ المحفز على تحويل كامل عبر خمس دورات إعادة تدوير، محققًا إجمالي 48.5 مليمول من المنتج مع عائد معزول قدره 97% وعامل E قدره 9. تؤكد النتائج على إمكانيات إعادة استخدام السيليكون من الدرجة الشمسية، الذي يعتبر عادة غير قابل للاستخدام مرة أخرى، إلى محفز فعال ومستدام، مما يوفر بديلاً قيمًا لمحفزات Pd/C التقليدية بينما يمدد دورة حياة مادة حيوية.

Journal: Green Chemistry, Volume: 28, Issue: 17
DOI: https://doi.org/10.1039/d6gc00369a
Publication Date: 2026-01-01
Author(s): Giulia Brufani et al.
Primary Topic: Catalytic Cross-Coupling Reactions

Overview

The research presents a novel strategy for managing the increasing volume of End-of-Life (EoL) photovoltaic (PV) waste by upcycling silicon recovered from discarded solar panels. With projections indicating that global PV waste could reach 8 million tons by 2030, the study emphasizes the urgent need for effective recycling methods. The authors propose utilizing this recovered silicon as a heterogeneous support for palladium (Pd) nanoparticle-based catalytic systems, demonstrating that the newly developed Pd/Si_EoLPV catalyst exhibits catalytic performance in the Mizoroki-Heck reaction that is comparable to, or even exceeds, that of traditional Pd/C catalysts. The catalyst achieved a turnover number (TON) of 5820 and a turnover frequency (TOF) of 582 h⁻¹, with minimal palladium leaching below 3 ppm over six consecutive runs.

The findings highlight the potential of recycling solar-grade silicon, which is otherwise deemed non-reusable for photovoltaic applications, into an efficient and stable catalyst. The Pd/Si_EoLPV catalyst successfully facilitated the synthesis of 22 different products, including intermediates for pharmaceutical compounds, while maintaining high recyclability and an excellent isolated yield of 97%. This work not only provides a sustainable alternative to conventional Pd/C catalysts but also offers a valuable approach to extending the lifecycle of a critical material, thereby addressing both environmental concerns and resource management in the context of growing EoL solar panel waste.

Introduction

The introduction highlights the pivotal role of solar energy in the global shift towards renewable energy, with photovoltaic (PV) technology experiencing remarkable growth. In 2024, global PV installations reached a record 597 GW, with projections estimating an increase to over 1630 GW by 2030 and 4500 GW by 2050. However, this growth poses significant environmental challenges, as the average lifespan of PV modules leads to an expected waste volume of approximately 8 million tons by 2030, escalating to 60-78 million tons by 2050. The European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive aims to mitigate these issues by promoting recycling and proper waste management, emphasizing the need for circular economy strategies in the PV industry.

The section further discusses the composition of end-of-life (EoL) PV waste, which includes various materials such as glass, polymers, and metals. Life cycle assessments indicate that recycling EoL PV can conserve energy, reduce CO₂ emissions, and alleviate resource depletion. Despite the economic and environmental burdens associated with silicon production, effective recycling strategies could enhance sustainability in the PV sector. Various recycling methods are explored, including mechanical, thermal, and chemical processes, each with its advantages and challenges. The paper introduces a novel approach to upcycle silicon from EoL PV modules into a palladium (Pd) catalytic system for applications in organic synthesis, particularly the Mizoroki-Heck reaction, using biomass-derived γ-valerolactone as a reaction medium to align with sustainable practices. This innovative use of recycled silicon underscores its potential in catalysis, presenting a promising avenue for addressing both waste management and resource recovery in the solar industry.

Methods

The experimental section of the research paper outlines the methodologies employed to investigate the research questions posed. It details the design of the experiments, including the selection of materials, the setup of apparatus, and the protocols followed to ensure reproducibility and reliability of results. Specific attention is given to the control variables and the statistical methods used for data analysis, which are crucial for validating the findings.

Additionally, the section may describe the sampling techniques and the criteria for participant selection, if applicable, as well as any ethical considerations taken into account during the experimentation. The results obtained from these experiments are expected to provide insights into the hypotheses tested, contributing to the overall understanding of the subject matter.

Results

In this study, a catalyst was developed from crystalline silicon extracted from end-of-life (EoL) photovoltaic modules, achieving an 86 wt% purity after a series of processing steps including delamination, leaching, and milling. The resulting silicon powder (Si_EoLPV) was utilized to immobilize palladium (Pd) nanoparticles via a polyol method, with the catalyst’s characteristics compared to those made from commercial metallurgical-grade silicon. Both catalysts exhibited similar Pd nanoparticle sizes (3.6 ± 1.1 nm for Pd/Si and 3.8 ± 1.2 nm for Pd/Si_EoLPV) and a comparable Pd oxidation state distribution, indicating that the silicon source did not significantly affect the structural properties of the Pd nanoparticles.

The catalytic performance of the Pd/Si_EoLPV catalyst was evaluated in the Mizoroki-Heck reaction, where it demonstrated superior efficiency in the presence of the biobased solvent gamma-valerolactone (GVL), achieving complete conversion of iodobenzene. In contrast, other solvents and inorganic bases yielded lower conversions. Notably, the Pd leaching from the Si-based catalyst was significantly lower (2.6-2.7 ppm) compared to that from a commercially available Pd/C catalyst (8.9 ppm), suggesting enhanced stability and sustainability of the Si-derived catalyst. These findings underscore the potential of using silicon from EoL photovoltaic modules as an effective and environmentally friendly support for Pd nanoparticles in catalytic applications.

Discussion

In this study, the authors present an innovative upcycling strategy for silicon recovered from end-of-life photovoltaic panels, utilizing it as a support for a heterogeneous palladium-based catalyst (Pd/Si_EoLPV). The catalyst was synthesized through a series of processes including delamination, leaching to remove aluminum and silver, and high-energy ball milling. The resulting Pd/Si_EoLPV catalyst demonstrated catalytic efficiency in the Mizoroki-Heck coupling reaction using gamma-valerolactone (GVL) as a green solvent, achieving a turnover number (TON) of 5820 and a turnover frequency (TOF) of 582 h⁻¹. The catalyst exhibited excellent recyclability, maintaining stable performance over six consecutive runs with palladium leaching below 3 ppm.

The study highlights the catalyst’s versatility, successfully facilitating the synthesis of 22 different substrates, including intermediates for pharmaceutical applications such as rilpivirine and Lp-PLA₂ inhibitors. On a gram scale, the catalyst maintained complete conversion across five recycling cycles, yielding a total of 48.5 mmol of product with an isolated yield of 97% and an E-factor of 9. The findings underscore the potential of repurposing solar-grade silicon, which is typically deemed non-reusable, into an efficient and sustainable catalyst, offering a valuable alternative to conventional Pd/C catalysts while extending the lifecycle of a critical material.