إنتاج النيوترونات باستخدام HiCANS بقدرة 10 كيلو وات استنادًا إلى SATELIT، هدف CEA-Saclay مع الليثيوم السائل Neutron production with a 10 kW HiCANS based on SATELIT, a CEA-Saclay target with liquid lithium

شارك:
المجلة: The European Physical Journal A، المجلد: 62، العدد: 4
DOI: https://doi.org/10.1140/epja/s10050-026-01852-1
تاريخ النشر: 2026-04-20
المؤلف: Loïc Thulliez وآخرون
الموضوع الرئيسي: فيزياء وهندسة المفاعلات النووية

نظرة عامة

تتناول تطوير مصادر النيوترونات المدفوعة بمسرعات ذات تيار عالٍ (HiCANS) في CEA-Saclay التناقص في توفر مصادر النيوترونات متوسطة الحجم بسبب إيقاف تشغيل المفاعلات النووية البحثية في أوروبا. باستخدام مسرع IPHI، الذي ينتج شعاع بروتون بجهد 3 ميغا فولت مع تيارات تصل إلى 100 مللي أمبير، وهدف الليثيوم السائل SATELIT، أجرت المنشأة حملة تجريبية ناجحة في 2024-2025. خلال هذه الحملة، تم توجيه شعاع بروتون بقدرة 10 كيلو وات نحو هدف الليثيوم لمدة تقارب 100 ساعة، مما أسفر عن إجمالي قدرة شعاع متراكمة قدرها 840 كيلو وات. من الجدير بالذكر أن المنشأة عملت بشكل مستمر لأكثر من 11 ساعة في مناسبتين، مما يدل على موثوقيتها واستقرارها.

مكن دمج مثبت بولي إيثيلين مع هدف SATELIT من استخراج شعاع نيوتروني حراري، محققًا تدفقًا يتجاوز $10^6 \, \text{n.cm}^{-2} \cdot \text{s}^{-1}$ على بعد 1.4 متر من نقطة الاستخراج، مما يجعله مناسبًا لمجموعة متنوعة من تطبيقات النيوترونات. تم تقييم نقاء الشعاع باستخدام نسبة الكادميوم، مما أسفر عن قيم تتراوح بين 5 و 25، اعتمادًا على وجود فلتر نيوتروني من الياقوت. بالإضافة إلى ذلك، قدمت تقنيات تصوير النيوترونات رؤى حول الدقة المكانية، محققة حوالي 100 ميكرومتر عند نسبة الطول إلى القطر (L/D) تبلغ 130. ستركز الأعمال المستقبلية على استراتيجيات للتخفيف من تراكم $^7\text{Be}$ داخل النظام، مما يبرز إمكانية HiCANS في المساهمة بشكل كبير في مشهد مصادر النيوترونات المتوسطة في أوروبا.

مقدمة

تسلط المقدمة الضوء على الدور الحاسم لمرافق شعاع النيوترونات الحرارية في أبحاث المادة المكثفة والنووية، فضلاً عن تطبيقاتها في تصوير النيوترونات والعلاج الطبي. في أوروبا، أدى إغلاق العديد من المفاعلات النووية البحثية الصغيرة والمتوسطة إلى الاعتماد على مصادر التفكك الكبيرة، مثل مصدر التفكك الأوروبي (ESS). ومع ذلك، لا يمكن لهذه المرافق الكبيرة أن تحل محل مصادر النيوترونات المحلية التي تعتبر ضرورية للمبادرات التعليمية وتطوير تقنيات تجريبية جديدة. استجابةً لذلك، بدأت عدة مؤسسات بحثية أوروبية في تطوير مصادر النيوترونات المدفوعة بمسرعات ذات تيار عالٍ (HiCANS)، والتي تهدف إلى توفير شعاعات نيوترونية مدمجة وقوية.

تتقدم منشأة CEA-Saclay في فرنسا بمشروع ICONE، الذي يهدف إلى استخدام شعاع بروتون بقدرة 25 ميغا فولت لتوليد شعاعات نيوترونية لتجارب التشتت. تتبع هذه المبادرة إيقاف تشغيل مفاعل ORPHEE وتشمل استخدام مسرع بروتون عالي الكثافة، IPHI، الذي كان يعمل منذ عام 2016. توضح المقدمة التحديات التي تواجه تحسين تجميع الهدف-المثبت-العاكس-الدرع لزيادة تدفق النيوترونات، بالإضافة إلى تطوير أهداف من البريليوم الصلب والليثيوم السائل لتعزيز إنتاج النيوترونات. يركز مشروع SATELIT، الذي يركز على هدف الليثيوم السائل، على تحقيق عوائد نيوترونية أعلى وهو هيكلي على مراحل، مع تجارب جارية للتحقق من إنتاج النيوترونات المستدامة وتوصيف شعاع النيوترونات الحرارية. ستفصل الأقسام التالية من الورقة مكونات ونتائج هذا التطوير لـ HiCANS.

طرق

في قسم الطرق من ورقة البحث، يوضح المؤلفون الإعداد التجريبي لهدف الليثيوم السائل SATELIT، مع التركيز على توافق الليثيوم مع مواد مختلفة، وخاصة الفولاذ المقاوم للصدأ 316L، ودرجات التيتانيوم، والسبائك. تم إجراء دراسات تآكل لتقييم أداء هذه المواد تحت ظروف التشغيل، مع التركيز على تقليل تلوث النيتروجين، وهو عامل تآكل معروف. يذكر المؤلفون أنه، على الرغم من وجود النيتروجين بمئات الأجزاء في المليون بالوزن (ppmw)، تم تقييم التآكل على أنه منخفض أو ضئيل عند درجات حرارة أقل من 300 درجة مئوية، خاصة عند التعامل مع خزان الليثيوم وملئه تحت فراغ أو غطاء من الأرجون للحد من تعرض الهواء.

تمت caracterization آلية التآكل من خلال الذوبان المتجانس لسطح الفولاذ، المتأثر بدرجة الحرارة، وتركيز النيتروجين، ومعدل تدفق الليثيوم السائل. تفترض الدراسة أن النيتروجين المذاب قد يشكل مركبات Li-Fe/Cr-N، على الرغم من نقص البيانات المحددة لدرجات الحرارة المنخفضة ومستويات النيتروجين العالية. أجرى المؤلفون اختبارات تآكل ثابتة واختبارات شد لتقييم الخصائص الميكانيكية، ووجدوا ذوبانًا ضئيلًا وعدم وجود تدهور ميكانيكي كبير على مدى عمر خدمة يبلغ 1500 ساعة. بالإضافة إلى ذلك، لاحظوا أنه بينما أظهر الفولاذ 316L تآكلًا ضئيلًا، كان الحديد النقي أكثر عرضة قليلاً للتآكل بين الحبيبات، خاصة عند حدود الحبيبات. تختتم القسم بوصف التوصيف التجريبي لشعاع النيوترونات المنتج خلال الحملة، التي استمرت لمدة تقارب 100 ساعة مع شعاع بروتون بقدرة 10 كيلو وات.

نقاش

تم تصميم منشأة IPHI (Injecteur de Protons Haute Intensité) في CEA-Saclay لإنتاج شعاع بروتون عالي التيار بجهد 3 ميغا فولت لمجموعة متنوعة من التطبيقات، بما في ذلك تجربة SATELIT. يتضمن نظام المسرع مصدر أيون (SILHI)، وخط نقل شعاع منخفض الطاقة (LEBT)، وتجويف رباعي التردد (RFQ)، وخط نقل شعاع عالي الطاقة (HEBT). يقوم RFQ بتسريع البروتونات من 95 كيلو فولت إلى 3 ميغا فولت مع الحفاظ على تركيز الشعاع من خلال سلسلة من الرباعيات المغناطيسية والموجهات. يهدف الإعداد التجريبي إلى تقديم شعاع بروتون بقدرة 10 كيلو وات، مع ضبط دقيق لبصريات الشعاع وتحسين النقل، محققًا كفاءة نقل تزيد عن 97% خلال تجارب إنتاج النيوترونات.

أظهرت الحملة التجريبية موثوقية عالية، مع القدرة على تبديل قدرة شعاع البروتون من 0 إلى 10 كيلو وات بسلاسة بعد زيادات حذرة أولية. يستخدم هدف SATELIT حلقة ليثيوم سائل لإنتاج النيوترونات، مع تفاعل فيلم ليثيوم بسمك مليميترين مع شعاع البروتون. يتضمن تصميم النظام مراقبة صارمة وتدابير أمان لمنع تجمد الليثيوم وضمان سلامة الفراغ. من الجدير بالذكر أن دمج تقنيات الختم المتقدمة وأنظمة التحكم في درجة الحرارة كان حاسمًا في الحفاظ على الاستقرار التشغيلي والسلامة طوال التجارب، مما أسفر عن تسجيل عالمي قدره 840 كيلو وات.ساعات من الطاقة الشعاعية المتراكمة عند هذا المستوى من الطاقة.

Journal: The European Physical Journal A, Volume: 62, Issue: 4
DOI: https://doi.org/10.1140/epja/s10050-026-01852-1
Publication Date: 2026-04-20
Author(s): Loïc Thulliez et al.
Primary Topic: Nuclear reactor physics and engineering

Overview

The development of High-Current Accelerator-driven Neutron Sources (HiCANS) at CEA-Saclay addresses the diminishing availability of medium-scale neutron sources due to the decommissioning of research nuclear reactors in Europe. Utilizing the IPHI accelerator, which produces a 3 MeV proton beam with currents up to 100 mA, and the SATELIT liquid lithium target, the facility successfully conducted an experimental campaign in 2024-2025. During this campaign, a 10 kW proton beam was directed at the lithium target for nearly 100 hours, resulting in a total accumulated beam power of 840 kW.h. Notably, the facility operated continuously for over 11 hours on two occasions, demonstrating its reliability and stability.

The integration of a polyethylene moderator with the SATELIT target enabled the extraction of a thermal neutron beam, achieving a flux exceeding $10^6 \, \text{n.cm}^{-2} \cdot \text{s}^{-1}$ at a distance of 1.4 m from the extraction point, suitable for various neutron applications. The beam purity was assessed using the cadmium ratio, yielding values between 5 and 25, depending on the presence of a sapphire neutron filter. Additionally, neutron imaging techniques provided insights into the spatial resolution, achieving approximately 100 µm at a length-to-diameter (L/D) ratio of 130. Future work will focus on strategies to mitigate the accumulation of $^7\text{Be}$ within the system, underscoring the potential of HiCANS to significantly contribute to the medium neutron source landscape in Europe.

Introduction

The introduction highlights the critical role of thermal neutron beam facilities in condensed matter and nuclear research, as well as their applications in neutron imaging and medical therapy. In Europe, the closure of many small and medium-sized research nuclear reactors has led to a reliance on large-scale spallation sources, such as the European Spallation Source (ESS). However, these large facilities cannot replace local neutron sources that are essential for educational initiatives and the development of new experimental techniques. In response, several European research institutions have initiated the development of High-Current Accelerator-driven Neutron Sources (HiCANS), which are designed to provide compact and powerful neutron beams.

Specifically, the CEA-Saclay facility in France is advancing the ICONE project, which aims to utilize a 25 MeV proton beam to generate neutron beams for scattering experiments. This initiative follows the shutdown of the ORPHEE reactor and involves the use of a high-intensity proton accelerator, the IPHI, which has been operational since 2016. The introduction outlines the challenges faced in optimizing the target-moderator-reflector-shielding assembly to maximize neutron flux, as well as the development of both solid beryllium and liquid lithium targets to enhance neutron production. The SATELIT project, focusing on a liquid lithium target, aims to achieve higher neutron yields and is structured in phases, with ongoing experiments to validate sustainable neutron production and characterize the thermal neutron beam. The subsequent sections of the paper will detail the components and results of this HiCANS development.

Methods

In the Methods section of the research paper, the authors detail the experimental setup for the SATELIT liquid lithium target, emphasizing the compatibility of lithium with various materials, particularly 316L stainless steel, titanium grades, and alloys. Corrosion studies were conducted to evaluate the performance of these materials under operational conditions, with a focus on minimizing nitrogen contamination, a known corrosive agent. The authors report that, despite the presence of nitrogen at several hundred parts per million by weight (ppmw), corrosion was assessed as low to negligible at temperatures below 300 °C, particularly when handling and filling the lithium tank were conducted under vacuum or argon cover to limit air exposure.

The corrosion mechanism was characterized by the homogeneous dissolution of the steel surface, influenced by temperature, nitrogen concentration, and liquid lithium flow rate. The study hypothesizes that dissolved nitrogen may form Li-Fe/Cr-N compounds, although specific data for low temperatures and high nitrogen levels were lacking. The authors conducted static corrosion tests and tensile tests to assess mechanical properties, finding negligible dissolution and no significant mechanical degradation over a service lifetime of 1500 hours. Additionally, they noted that while 316L steel showed minimal corrosion, pure iron was slightly more susceptible to intergranular corrosion, particularly at grain boundaries. The section concludes with a description of the experimental characterization of the neutron beam produced during the campaign, which lasted nearly 100 hours with a 10 kW proton beam.

Discussion

The IPHI (Injecteur de Protons Haute Intensité) facility at CEA-Saclay is engineered to produce a high-current 3 MeV proton beam for various applications, including the SATELIT experiment. The accelerator system includes an ion source (SILHI), a Low-Energy Beam Transport (LEBT) line, a Radio-Frequency Quadrupole (RFQ) cavity, and a High Energy Beam Transport (HEBT) line. The RFQ accelerates protons from 95 keV to 3 MeV while maintaining beam focusing through a series of magnetic quadrupoles and steerers. The experimental setup aims to deliver a 10 kW proton beam, with careful tuning of beam optics and transmission optimization, achieving over 97% transmission efficiency during neutron production experiments.

The experimental campaign demonstrated high reliability, with the capability to switch the proton beam power from 0 to 10 kW seamlessly after initial cautious ramp-ups. The SATELIT target utilizes a liquid lithium loop to produce neutrons, with a two-millimeter-thick lithium film interacting with the proton beam. The system’s design includes rigorous monitoring and safety measures to prevent lithium solidification and ensure vacuum integrity. Notably, the integration of advanced sealing techniques and temperature control systems has been crucial in maintaining operational stability and safety throughout the experiments, culminating in a world record of 840 kW.h of accumulated beam power at this energy level.