ابتكارات القطاع المصرفي وأداء قطاع التصنيع في نيجيريا Banking sector innovations and manufacturing sector performance in Nigeria

شارك:
المجلة: FUDMA Journal of Accounting and Finance Research [FUJAFR]، المجلد: 4، العدد: 1
DOI: https://doi.org/10.33003/fujafr-2026.v4i1.316.307-319
تاريخ النشر: 2026-03-31
المؤلف: Suotor, Memoye, Ph.D وآخرون
الموضوع الرئيسي: التحول الرقمي في الخدمات المالية

نظرة عامة

تدرس هذه الدراسة تأثير ابتكارات القطاع المصرفي على أداء التصنيع في نيجيريا من الربع الأول 2010 إلى الربع الرابع 2023، مع التركيز على الأدوات المالية الرقمية مثل أجهزة الصراف الآلي (ATMs)، وأنظمة نقاط البيع (POS)، والمدفوعات عبر الويب، وأنظمة التسوية الإجمالية في الوقت الحقيقي (RTGS). باستخدام نموذج الانحدار الذاتي الموزع (ARDL)، تحلل البحث البيانات الفصلية من البنك المركزي النيجيري، مع اعتبار إنتاج التصنيع المتغير التابع. تكشف النتائج عن علاقة معقدة وغير خطية: بينما تكون تأثيرات الفترة الحالية لأجهزة الصراف الآلي، ونقاط البيع، والمدفوعات عبر الويب سلبية، فإن قيمها المتأخرة في الفترة الأولى تظهر تأثيرًا إيجابيًا، مما يشير إلى أن فوائد هذه الابتكارات تحتاج إلى وقت لتتحقق. على النقيض من ذلك، تمارس أنظمة RTGS تأثيرًا سلبيًا مستمرًا على إنتاج التصنيع.

تخلص الدراسة إلى أن الابتكارات المصرفية لها حاليًا تأثير ضعيف وغير متسق على قطاع التصنيع في نيجيريا، ويرجع ذلك أساسًا إلى الكفاءات الهيكلية مثل عدم موثوقية الإنترنت وإمدادات الكهرباء. تتماشى هذه النتائج مع نظرية الابتكار المالي المستند إلى القيود، مما يشير إلى أنه بينما تهدف الابتكارات المالية إلى تقليل تكاليف المعاملات وتعزيز الشمول المالي، فإن فعاليتها تتأثر بشكل كبير بالتحديات البنية التحتية. لتعزيز تأثير هذه الابتكارات، توصي الدراسة بأن تعمل الحكومة النيجيرية والبنك المركزي على تعزيز اعتماد الأدوات المالية الرقمية، وتحسين إمكانية الوصول إلى الإنترنت، ومعالجة قضايا إمدادات الكهرباء. بدون هذه التحسينات النظامية، ستظل الفوائد المحتملة للابتكارات المصرفية هامشية، مما يعيق الانتقال إلى اقتصاد تصنيع مدفوع رقميًا.

النتائج

تشير نتائج اختبار جذر الوحدة المعزز من ديكي-فولر (ADF) إلى أن معظم المتغيرات المتعلقة بقطاع التصنيع في نيجيريا، بما في ذلك أجهزة الصراف الآلي (ATM) وأنظمة نقاط البيع (POS)، غير مستقرة عند المستويات ولكنها تحقق الاستقرار عند الفروق الأولى، مما يشير إلى أوامر تكامل مختلطة (I(0) و I(1)). وبالتالي، يعتبر نموذج الانحدار الذاتي الموزع (ARDL) مناسبًا لمزيد من التحليل. يكشف اختبار التكامل المشترك عن علاقة طويلة الأجل هامة بين المتغيرات، حيث يتجاوز إحصاء F البالغ 5.961107 العتبة الحرجة البالغة 3.49، مما يؤدي إلى رفض الفرضية الصفرية بعدم وجود علاقة طويلة الأجل.

توضح النتائج تفاعلًا معقدًا بين ابتكارات القطاع المصرفي وأداء التصنيع. من الجدير بالذكر أنه بينما يؤثر التأخير الحالي لأجهزة الصراف الآلي سلبًا على إنتاج التصنيع، يظهر التأخير الأول تأثيرًا إيجابيًا كبيرًا، مما يشير إلى أن التعديلات التشغيلية الأولية يمكن أن تؤدي إلى تعزيز النشاط الصناعي. وبالمثل، تظهر أنظمة نقاط البيع ارتباطًا سلبيًا ضعيفًا عند المستويات الحالية ولكن تأثيرًا إيجابيًا كبيرًا عند التأخير الأول. على النقيض من ذلك، تظهر أنظمة الدفع الرقمية (DPS) تأثيرًا ضارًا باستمرار على أداء التصنيع، مما يعكس نقص التكامل بين المستخدمين الصناعيين. كما تظهر المدفوعات عبر الويب تأثيرًا سلبيًا في البداية ولكن تصبح ذات دلالة إيجابية عند التأخير الأول، مما يبرز أهميتها المتزايدة في قطاع التصنيع. بشكل عام، تتماشى الدراسة مع الأدبيات الحالية التي تؤكد على ضرورة وجود قطاع مالي فعال لتحقيق نمو صناعي مستدام.

المناقشة

تسلط قسم المناقشة في الورقة الضوء على الدور الحاسم للابتكارات المالية في القطاع المصرفي وتأثيرها على قطاع التصنيع في نيجيريا. ويؤكد على أنه بينما تم تصميم الابتكارات مثل أجهزة الصراف الآلي (ATMs) وأنظمة نقاط البيع (POS) والمدفوعات الرقمية لتعزيز كفاءة المعاملات والشمول المالي، فإن فعاليتها الفعلية تعيقها التحديات البنية التحتية، وخاصة عدم موثوقية الوصول إلى الإنترنت وإمدادات الكهرباء. تشير النتائج إلى أن التأثير الحالي للابتكارات المصرفية على إنتاج التصنيع ضعيف وغير متسق، مما يتماشى مع نظرية الابتكار المالي المستند إلى القيود، التي تفترض أن المؤسسات المالية تبتكر بشكل أساسي للتغلب على القيود الخارجية.

تخلص الدراسة إلى أنه لكي تستفيد الابتكارات المالية بشكل كبير قطاع التصنيع في نيجيريا، يجب أن تكون هناك جهود منسقة لتحسين البنية التحتية الرقمية وتعزيز الثقافة التكنولوجية بين المصنعين. تشمل التوصيات تعزيز اعتماد التكنولوجيا المالية، وضمان الوصول الموثوق إلى الإنترنت في المناطق الحضرية والريفية، ومعالجة أوجه القصور في البنية التحتية، وخاصة في إمدادات الكهرباء. هذه التدابير ضرورية لتحقيق إمكانيات الابتكارات المالية في دفع النمو الاقتصادي وتعزيز إنتاجية قطاع التصنيع في نيجيريا.

Journal: FUDMA Journal of Accounting and Finance Research [FUJAFR], Volume: 4, Issue: 1
DOI: https://doi.org/10.33003/fujafr-2026.v4i1.316.307-319
Publication Date: 2026-03-31
Author(s): Suotor, Memoye, Ph.D et al.
Primary Topic: Digital Transformation in Financial Services

Overview

This study investigates the impact of banking sector innovations on manufacturing performance in Nigeria from Q1 2010 to Q4 2023, focusing on digital financial tools such as Automated Teller Machines (ATMs), Point-of-Sale (POS) terminals, Web Payments, and Real-Time Gross Settlement (RTGS) systems. Employing an Autoregressive Distributed Lag (ARDL) model, the research analyzes quarterly data from the Central Bank of Nigeria, with manufacturing output as the dependent variable. The findings reveal a complex, non-linear relationship: while current-period effects of ATMs, POS, and Web payments are negative, their first-period lagged values show a positive impact, indicating that the benefits of these innovations require time to materialize. In contrast, RTGS systems consistently exert a negative influence on manufacturing output.

The study concludes that banking innovations currently have a weak and inconsistent effect on Nigeria’s manufacturing sector, primarily due to structural inefficiencies such as unreliable internet and electricity supply. These findings align with the Constraint-Induced Financial Innovation Theory, suggesting that while financial innovations aim to reduce transaction costs and enhance financial inclusion, their effectiveness is significantly hampered by infrastructural challenges. To enhance the impact of these innovations, the study recommends that the Nigerian government and the Central Bank promote the adoption of digital financial tools, improve internet accessibility, and address electricity supply issues. Without these systemic improvements, the potential benefits of banking innovations will remain marginal, hindering the transition to a digitally-driven manufacturing economy.

Results

The results of the augmented Dickey-Fuller (ADF) unit root test indicate that most variables related to Nigeria’s manufacturing sector, including automated teller machines (ATM) and point of sale (POS) systems, are non-stationary at levels but achieve stationarity at first differences, suggesting mixed integration orders (I(0) and I(1)). Consequently, the autoregressive distributed lag (ARDL) model is deemed appropriate for further analysis. The cointegration test reveals a significant long-term relationship among the variables, with the F-statistic of 5.961107 exceeding the critical threshold of 3.49, leading to the rejection of the null hypothesis of no long-term relationship.

The findings illustrate a complex interplay between banking sector innovations and manufacturing performance. Notably, while the current lag of ATMs negatively impacts manufacturing output, the first lag shows a substantial positive effect, indicating that initial operational adjustments can lead to enhanced industrial activity. Similarly, POS systems exhibit a weak negative association at current levels but a significant positive impact at the first lag. In contrast, digital payment systems (DPS) consistently show a detrimental effect on manufacturing performance, reflecting a lack of integration among industrial users. Web payments also demonstrate a negative impact initially but become positively significant at the first lag, underscoring their growing importance in the manufacturing sector. Overall, the study aligns with existing literature that emphasizes the necessity of an efficient financial sector for sustained industrial growth.

Discussion

The discussion section of the paper highlights the critical role of financial innovations in the banking sector and their impact on the manufacturing sector in Nigeria. It emphasizes that while innovations such as automated teller machines (ATMs), point-of-sale (POS) systems, and digital payments are designed to enhance transaction efficiency and financial inclusion, their actual effectiveness is hindered by infrastructural challenges, particularly unreliable internet access and electricity supply. The findings suggest that the current impact of banking innovations on manufacturing output is weak and inconsistent, aligning with the Constraint-Induced Financial Innovation Theory, which posits that financial institutions innovate primarily to overcome external constraints.

The study concludes that for financial innovations to significantly benefit Nigeria’s manufacturing sector, there must be a concerted effort to improve digital infrastructure and enhance technological literacy among manufacturers. Recommendations include promoting the adoption of financial technologies, ensuring reliable internet access across both urban and rural areas, and addressing infrastructural deficiencies, particularly in electricity supply. These measures are essential for realizing the potential of financial innovations to drive economic growth and enhance the productivity of the manufacturing sector in Nigeria.