DOI: https://doi.org/10.1038/s44296-026-00099-7
PMID: https://pubmed.ncbi.nlm.nih.gov/41971252
تاريخ النشر: 2026-04-10
المؤلف: Sam Burdett وآخرون
الموضوع الرئيسي: اختيار المواد وخصائصها
الطرق
في هذا القسم، يصف المؤلفون المنهجية المستخدمة لاختيار المواد باستخدام قاعدة بيانات مطورة لخصائص المواد، من خلال نهج مؤشر المواد لأشبي. تسهل هذه الطريقة الفحص الأولي للمواد بناءً على مقاييس الأداء المستمدة من المعادلات الحاكمة ذات الصلة بالمكونات الهيكلية، مثل العوارض والأعمدة. تؤكد الدراسة على أهمية دمج الاعتبارات البيئية، وخاصة الكربون المتجسد (EC)، جنبًا إلى جنب مع الأداء الميكانيكي. تم إجراء دراستين حالتين لتقييم التكافؤ الوظيفي لمواد مختلفة، بما في ذلك الخيارات التقليدية والناشئة مثل الصلب المعاد استخدامه، والخشب، والبامبو، مع الالتزام بالمعايير البريطانية لمتطلبات الأداء.
أشارت نتائج دراسة حالة العوارض إلى أن الصلب المعاد استخدامه والبامبو الغلام قد أظهرا أقل إجمالي للكربون المتجسد، حيث حقق الصلب المعاد استخدامه انخفاضًا ملحوظًا بنسبة 97% في الكربون المتجسد مقارنة بالصلب التقليدي. كما أبرزت النتائج قيود الخرسانة من حيث القوة الانحنائية والكتلة، مما يتطلب مقاطع أكبر ويؤدي إلى قيم كربون متجسد أعلى. استكشفت دراسة حالة العمود أداء المواد عالية الكفاءة تحت قيود الانبعاج، مما يعزز الحاجة إلى تقييم شامل يوازن بين الأداء الهيكلي والأثر البيئي. بشكل عام، تؤكد المنهجية والنتائج على إمكانية اختيار مواد مستدامة تقلل من الكربون المتجسد مع تلبية المتطلبات الوظيفية.
النتائج
في هذه الدراسة، تم تطوير مجموعة بيانات شاملة تضم 409 مواد، مصنفة إلى معادن وسبائك (n = 59)، بوليمرات وإيلاستومرات (n = 3)، هجين (n = 157)، وسيراميك وزجاج (n = 197). تم تقسيم مجموعة البيانات بالتساوي بين المواد “الناشئة” و”التقليدية”، مع تمثيل حوالي 50% من كل فئة. تم جمع البيانات حول 21 خاصية من خصائص المواد، مع التركيز الأساسي على الخصائص الهيكلية، وخاصة معامل يونغ ($E$) والكثافة ($\rho$).
كشفت التحليلات عن تباين كبير في معامل يونغ عبر عائلات المواد المختلفة. أظهرت المواد الخرسانية الناشئة، مثل خرسانة الطين المحروق من الحجر الجيري (LC3) والخرسانات الخالية من الأسمنت البورتلاندي ذاتية الدمك، قيم معامل يونغ تتراوح بين 34 إلى 41.4 غيغا باسكال و40.6 غيغا باسكال، على التوالي. ومن الجدير بالذكر أن معجون الأسمنت المدعم بالألياف أظهر نطاقًا واسعًا من القيم، من 0.7 إلى 38.1 غيغا باسكال، اعتمادًا على التركيبة المحددة. أظهرت المواد الهجينة الناشئة، بما في ذلك الخشب المعالج بالضغط والخشب المكثف، خصائص ميكانيكية تتطابق أو تتجاوز تلك الخاصة بالخشب الغلام التقليدي، مما يشير إلى إمكانياتها المعززة في البناء. بشكل عام، تشير النتائج إلى أن المواد الناشئة تمتلك خصائص مشابهة أو متفوقة على الخيارات التقليدية، مما يستدعي مزيدًا من الاعتبار في عمليات اختيار المواد.
المناقشة
تؤكد قسم المناقشة في ورقة البحث على الدور الحاسم لقوة الضغط في مواد البناء، مشددة على أهميتها لسلامة الهيكل. تشمل مجموعة البيانات التي تم تحليلها 208 نقاط بيانات، معظمها من الخرسانة ومعجون الأسمنت والمونة، والتي تمثل معًا ما يقرب من ثلثي البيانات. تظهر المواد الناشئة مثل معجون الأسمنت المدعم بالألياف، وLC3، والاسمنتات القائمة على المغنيسيوم، قوى ضغط قابلة للمقارنة مع الخيارات التقليدية، بقيم تتراوح بين 6.60 إلى 69.8 ميغاباسكال. ومن الجدير بالذكر أن الأسمنتات الحيوية وأنواع الخرسانة البديلة، بما في ذلك AAM وخرسانة LC3، تظهر أيضًا قوى ضغط واعدة، مما يشير إلى إمكانية تأثير بيئي أقل دون المساس بالأداء.
تناقش القسم أيضًا كثافة المواد المختلفة، كاشفة عن نطاق واسع للركام الخفيف ومعاجين الأسمنت الناشئة، والتي يمكن أن تؤثر بشكل كبير على خصائصها الميكانيكية وآثارها البيئية. تؤكد الدراسة على أهمية الكربون المتجسد (EC) وبيانات الطاقة، مشيرة إلى أن جزءًا فقط من المواد في مجموعة البيانات كان لديه مثل هذه المعلومات المتاحة. يمثل نقص البيانات هذا تحديات لتقييم استدامة المواد الناشئة. يدعو المؤلفون إلى تعزيز التعاون بين الأكاديميا والصناعة لتحسين جمع البيانات والشفافية، مما يدعم في النهاية اعتماد المواد منخفضة الكربون في البناء. تشير النتائج إلى أن المواد الناشئة، وخاصة منتجات الخشب الهندسي والصلب المعاد استخدامه، تقدم إمكانيات كبيرة لتقليل الآثار البيئية مع الحفاظ على الأداء الهيكلي.
DOI: https://doi.org/10.1038/s44296-026-00099-7
PMID: https://pubmed.ncbi.nlm.nih.gov/41971252
Publication Date: 2026-04-10
Author(s): Sam Burdett et al.
Primary Topic: Material Selection and Properties
Methods
In this section, the authors describe the methodology employed for materials selection using a developed materials property database, specifically through Ashby’s material index approach. This method facilitates the initial screening of materials based on performance metrics derived from governing equations relevant to structural components, such as beams and columns. The study emphasizes the importance of integrating environmental considerations, particularly embodied carbon (EC), alongside mechanical performance. Two case studies were conducted to evaluate the functional equivalence of various materials, including traditional and emerging options like reused steel, timber, and bamboo, while adhering to British standards for performance requirements.
The results from the floor-beam case study indicated that reused steel and bamboo glulam exhibited the lowest total EC, with reused steel achieving a remarkable 97% reduction in EC compared to traditional steel. The findings also highlighted the limitations of concrete in terms of flexural strength and mass, necessitating larger sections and resulting in higher EC values. The column case study further explored the performance of high-E materials under buckling constraints, reinforcing the need for a comprehensive assessment that balances structural performance with environmental impact. Overall, the methodology and findings underscore the potential for selecting sustainable materials that minimize EC while meeting functional requirements.
Results
In this study, a comprehensive dataset was developed encompassing 409 materials, categorized into metals and alloys (n = 59), polymers and elastomers (n = 3), hybrids (n = 157), and ceramics and glasses (n = 197). The dataset is evenly split between ’emerging’ and ‘traditional’ materials, with approximately 50% representation from each class. Data were collected on 21 material properties, with a primary focus on structural characteristics, particularly Young’s modulus ($E$) and density ($\rho$).
The analysis revealed significant variability in Young’s modulus across different material families. Emerging concrete materials, such as limestone calcined clay concrete (LC3) and self-compacting Portland cement-free concretes, exhibited Young’s modulus values ranging from 34 to 41.4 GPa and 40.6 GPa, respectively. Notably, fibre reinforced cement paste showed a wide range of values, from 0.7 to 38.1 GPa, depending on the specific composition. Emerging hybrid materials, including cross-laminated timber and densified wood, demonstrated mechanical properties that match or exceed those of traditional glulam timber, indicating their potential for enhanced application in construction. Overall, the findings suggest that emerging materials possess comparable or superior properties to conventional options, warranting further consideration in material selection processes.
Discussion
The discussion section of the research paper emphasizes the critical role of compressive strength in construction materials, highlighting its significance for structural integrity. The dataset analyzed includes 208 datapoints, predominantly from concrete, cement paste, and mortar, which together represent nearly two-thirds of the data. Emerging materials such as fiber-reinforced cement paste, LC3, and magnesium-based cements exhibit compressive strengths comparable to traditional options, with values ranging from 6.60 to 69.8 MPa. Notably, biocements and alternative concrete types, including AAM and LC3 concrete, also demonstrate promising compressive strengths, suggesting potential for lower environmental impact without compromising performance.
The section further discusses the density of various materials, revealing a wide range for lightweight aggregates and emerging cement pastes, which can significantly influence their mechanical properties and environmental impacts. The study underscores the importance of embodied carbon (EC) and energy data, noting that only a fraction of the materials in the dataset had such information available. This lack of data presents challenges for assessing the sustainability of emerging materials. The authors advocate for enhanced collaboration between academia and industry to improve data collection and transparency, ultimately supporting the adoption of low-carbon materials in construction. The findings indicate that emerging materials, particularly engineered wood products and reused steel, offer significant potential for reducing environmental impacts while maintaining structural performance.
