استخدام مصل الإنسان الأصلي لتقييم ملاءمة مواد تقييم الجودة الخارجية بناءً على قياسات التستوستيرون والبروجستيرون و17β-إستراديول Using native human sera to assess the suitability of external quality assessment materials based on testosterone, progesterone, and 17β-estradiol measurements

شارك:
المجلة: Frontiers in Molecular Biosciences، المجلد: 13
DOI: https://doi.org/10.3389/fmolb.2026.1758376
PMID: https://pubmed.ncbi.nlm.nih.gov/42211940
تاريخ النشر: 2026-05-13
المؤلف: Laura Vierbaum وآخرون
الموضوع الرئيسي: ممارسات المختبرات السريرية ومراقبة الجودة

نظرة عامة

تناقش قسم ورقة البحث مزايا استخدام مواد تقييم الجودة الخارجية الأصلية المقارنة (EQAMs) بدلاً من الدراسات التقليدية للتوافق. تتيح الطريقة المقترحة لمزودي EQA تقييم ملاءمة وتوافق EQAMs بشكل أكثر كفاءة من خلال الاستفادة من البنى التحتية الحالية، مما يحافظ على الموارد. ومع ذلك، يُلاحظ أن هذه الطريقة لا تزال تتطلب موارد كبيرة ومحدودة لتحليلات وأسئلة معينة.

علاوة على ذلك، تؤكد هذه القسم على أن تقييمات EQA المعتمدة على الدقة والإجراءات التصحيحية لإجراءات القياس الفردية (MPs) تكون صالحة فقط عند استخدام EQAMs القابلة للتوافق. نظرًا للتحديات العملية واللوجستية المرتبطة بالدراسات الشاملة للتوافق، يقترح المؤلفون استراتيجية لتحديد أزواج التحليل/MP الحرجة مسبقًا للتقييمات المستهدفة. تهدف هذه الطريقة المركزة إلى تحسين تخصيص الموارد مع الاعتراف بالقيود الجوهرية للمنهجية.

مقدمة

تؤكد المقدمة على الدور الحاسم للرقابة المستمرة على الجودة في المختبرات الطبية لضمان أداء تحليلي موثوق، وهو أمر حيوي للتشخيصات الدقيقة والعلاجات الفعالة للمرضى. يتم تسليط الضوء على مخططات تقييم الجودة الخارجية (EQA) كأدوات أساسية لتقييم قابلية المقارنة لقيم القياس عبر المختبرات وتقييم توحيد إجراءات القياس المختلفة (MPs). تعتبر ملاءمة عينات التحكم، وخاصة مواد تقييم الجودة الخارجية (EQAMs)، أمرًا حيويًا لاستخلاص استنتاجات صحيحة بشأن جودة واختلاف الاختبارات التحليلية. يجب معالجة هذه المواد، التي تشمل عينات المرضى المجمعة والمستقرة، بطريقة تقلل من الانحرافات المحددة لـ MP لضمان نتائج قياس دقيقة.

تهدف الدراسة إلى استكشاف جدوى استخدام تحليلات EQA المقارنة مع عدد محدود من EQAMs الأصلية وEQAMs المعالجة بشكل روتيني، مع التركيز على الهرمونات مثل التستوستيرون، والبروجستيرون، و17β-إستراديول. أشارت الاستطلاعات السابقة إلى وجود اختلافات كبيرة في نتائج المناعية المرتبطة بمصنعي الكواشف المختلفين والانحرافات عن قيم القياس المرجعية (RMVs). تسعى هذه البحث لتحديد ما إذا كانت الاختلافات الملحوظة في نتائج القياس تعود إلى انحياز عدم القابلية للتوافق، مثل تأثيرات المصفوفة، أو إلى انحيازات جوهرية تتعلق بأداء إجراءات القياس المحددة.

النتائج

تشير نتائج الدراسة إلى معدل مشاركة يبلغ حوالي 65% لقياس EQAMs الأصلية، حيث يُعزى عدم المشاركة بشكل رئيسي إلى عوامل تنظيمية بدلاً من انحيازات أداء المختبر. في الاستطلاع الأول لـ EQA الذي تم إجراؤه في يناير 2020، أسفر قياس البروجستيرون عن 4 إلى 8 نتائج لكل مصنع كواشف، باستثناء المجموعة RO، التي أبلغت عن 30 نتيجة. أظهرت الاستطلاعات اللاحقة في أكتوبر 2020 وأكتوبر 2021 للتستوستيرون، والبروجستيرون، و17β-إستراديول تباينًا في النتائج، يتراوح من 6 إلى 22 لمعظم المجموعات و76 إلى 96 للمجموعة RO. كشفت التحليلات أن الانحيازات المتوسطة لقيم القياس المرجعية (RMVs) اختلفت عبر مجموعات المصنعين، حيث تجاوز بعضها معيار قبول EQA البالغ ±35%. ومن الجدير بالذكر أن الانحرافات السلبية للتستوستيرون لوحظت في المجموعات AX وBG وDG، بينما أبلغت المجموعة AX عن قيم بروجستيرون أعلى من RMV.

كما سلطت الدراسة الضوء على وجود اختلافات كبيرة في الانحياز المتوسط بين EQAMs الأصلية والمُعالجة عبر استطلاعات مختلفة. بالنسبة للتستوستيرون، كانت أكبر اختلاف ملحوظ هو -29.9% لكاشف TH، بينما بالنسبة للبروجستيرون، لوحظ تباين كبير في المجموعات BG وDG، مع اختلافات متوسطة تتراوح من -19.3% إلى 28.9%. بالنسبة لـ 17β-إستراديول، أظهرت المجموعات AB وRO انحرافات ملحوظة، حيث كانت التباينات في الانحياز المتوسط أكبر بالنسبة لـ EQAMs المعالجة. أشارت تحليلات نموذج التأثيرات المختلطة إلى أنه عند التركيز على EQAMs بمستويات متوسطة من التستوستيرون (10-25 نانومول/لتر)، كانت الاختلافات في الانحياز بين أنواع العينات أقل قليلاً، خاصة بالنسبة للمجموعة TH، التي انخفضت من -29.9% إلى -14.6%. بشكل عام، تؤكد النتائج على تباين أداء المختبرات وأهمية مراعاة نوع العينة عند تقييم نتائج EQA.

المناقشة

تقيّم الدراسة فعالية مواد تقييم الجودة الخارجية المعالجة (EQAMs) لقياس التستوستيرون، والبروجستيرون، و17β-إستراديول من خلال مقارنتها مع EQAMs الأصلية. تم إعداد EQAMs المعالجة من مصل بشري مجمع، مُضاف إليه هرمونات، ومستقر، بينما كانت EQAMs الأصلية تتكون من مصل مجمع طازج بدون استقرار. شملت التحليلات نموذج تأثيرات مختلطة لتقييم بيانات EQA المحولة، مع التركيز على الانحياز المتوسط لكل نوع عينة مقابل قيم القياس المرجعية (RMVs). أشارت النتائج إلى أنه بينما أظهرت بعض EQAMs المعالجة انحيازًا مقبولًا ضمن الحدود السريرية ذات الصلة، لوحظت اختلافات في أزواج التحليل-المصنعين المحددة، مما يشير إلى احتمال وجود انحياز عدم القابلية للتوافق.

تؤكد النتائج على أهمية استخدام EQAMs الأصلية جنبًا إلى جنب مع المواد المعالجة لفهم أفضل لدقة القياس عبر منهجيات مختلفة. على الرغم من أن الدراسة واجهت قيودًا بسبب العدد القليل من EQAMs الأصلية، إلا أنها تسلط الضوء على الحاجة إلى تقييمات شاملة للتوافق لضمان أن تعكس EQAMs المعالجة بدقة قياسات عينات المرضى. تدعو النتائج إلى تفسير حذر للاختلافات في الانحياز، مع التأكيد على أن الانحرافات النظامية قد تنشأ من كل من طبيعة مواد التحكم وأداء التحليل لإجراءات القياس المستخدمة.

Journal: Frontiers in Molecular Biosciences, Volume: 13
DOI: https://doi.org/10.3389/fmolb.2026.1758376
PMID: https://pubmed.ncbi.nlm.nih.gov/42211940
Publication Date: 2026-05-13
Author(s): Laura Vierbaum et al.
Primary Topic: Clinical Laboratory Practices and Quality Control

Overview

The research paper section discusses the advantages of employing comparative native External Quality Assessment Materials (EQAMs) over traditional commutability studies. The proposed approach allows EQA providers to evaluate the suitability and commutability of EQAMs more efficiently by utilizing existing infrastructures, thus conserving resources. However, it is noted that this method is still resource-intensive and limited to specific analytes and questions.

Furthermore, the section emphasizes that accuracy-based EQA evaluations and corrective actions for individual measurement procedures (MPs) are only valid when commutable EQAMs are utilized. Due to the practical and logistical challenges associated with comprehensive commutability studies, the authors suggest a strategy of pre-identifying critical analyte/MP pairings for targeted assessments. This focused approach aims to optimize resource allocation while acknowledging the inherent limitations of the methodology.

Introduction

The introduction emphasizes the critical role of continuous quality control in medical laboratories to ensure reliable analytical performance, which is vital for accurate diagnoses and effective patient therapies. External quality assessment (EQA) schemes are highlighted as essential tools for evaluating the comparability of measurement values across laboratories and assessing the standardization of various measurement procedures (MPs). The suitability of control samples, particularly external quality assessment materials (EQAMs), is crucial for drawing valid conclusions regarding the quality and homogeneity of analytical testing. These materials, which include pooled and stabilized patient specimens, must be processed in a way that minimizes MP-specific deviations to ensure accurate measurement results.

The study aims to explore the feasibility of using comparative EQA analyses with a limited number of native EQAMs and routinely processed EQAMs, focusing on hormones such as testosterone, progesterone, and 17β-estradiol. Previous surveys indicated significant discrepancies in immunoassay results linked to different reagent manufacturers and deviations from reference measurement values (RMVs). This research seeks to determine whether the observed differences in measurement results are attributable to non-commutability bias, such as matrix effects, or to inherent biases related to the performance of specific measurement procedures.

Results

The results of the study indicate a participation rate of approximately 65% for the measurement of native EQAMs, with non-participation attributed mainly to organizational factors rather than laboratory performance biases. In the initial EQA survey conducted in January 2020, the measurement of progesterone yielded 4 to 8 results per reagent manufacturer, except for the RO collective, which reported 30 results. Subsequent surveys in October 2020 and October 2021 for testosterone, progesterone, and 17β-estradiol showed variability in results, ranging from 6 to 22 for most collectives and 76 to 96 for the RO collective. The analysis revealed that mean biases to the reference measurement values (RMVs) varied across manufacturer collectives, with some exceeding the EQA acceptance criterion of ±35%. Notably, negative deviations for testosterone were observed in the AX, BG, and DG collectives, while the AX collective reported higher progesterone values than the RMV.

The study also highlighted significant discrepancies in mean bias between pooled native and processed EQAMs across different surveys. For testosterone, the largest observed difference was -29.9% for the TH reagent, while for progesterone, considerable variability was noted in the BG and DG collectives, with mean differences ranging from -19.3% to 28.9%. For 17β-estradiol, the AB and RO collectives exhibited notable deviations, with variabilities in mean bias being greater for processed EQAMs. Mixed-effects model analyses indicated that when focusing on EQAMs with mid-range testosterone levels (10-25 nmol/L), the differences in bias between sample types were slightly reduced, particularly for the TH collective, which decreased from -29.9% to -14.6%. Overall, the findings underscore the variability in laboratory performance and the importance of considering sample type when evaluating EQA results.

Discussion

The study evaluates the effectiveness of processed external quality assessment materials (EQAMs) for measuring testosterone, progesterone, and 17β-estradiol by comparing them with native EQAMs. Processed EQAMs were prepared from pooled human sera, spiked with hormones, and stabilized, while native EQAMs consisted of fresh pooled sera without stabilization. The analysis involved a mixed-effects model to assess ln-transformed EQA data, focusing on the mean bias of each sample type against reference measurement values (RMVs). The results indicated that while some processed EQAMs showed acceptable bias within clinically relevant thresholds, discrepancies were noted for specific analyte-manufacturer pairings, suggesting potential non-commutability bias.

The findings underscore the importance of using native EQAMs alongside processed materials to better understand measurement accuracy across different methodologies. Although the study faced limitations due to the small number of native EQAMs, it highlights the need for comprehensive commutability assessments to ensure that processed EQAMs accurately reflect patient sample measurements. The results advocate for a cautious interpretation of bias differences, emphasizing that systematic deviations may arise from both the nature of the control materials and the analytical performance of the measurement procedures employed.