DOI: https://doi.org/10.1016/j.seppur.2026.139128
تاريخ النشر: 2026-07-01
المؤلف: Isa Sara Aimée Hiemstra وآخرون
الموضوع الرئيسي: الخصائص الكيميائية والفيزيائية في المحاليل المائية
نظرة عامة
تقدم هذه الدراسة نظامًا جديدًا من المذيبات الملحية المائية ذات الطورين (ATPS) لاستخراج وفصل الألجينات من الطحالب البنية، مما يوفر بديلاً مستدامًا لطرق الاستخراج القلوية التقليدية. تعتمد الطريقة على مبدأ الترسيب لتقسيم الأطوار الثلاثة عند تركيزات ملحية مرتفعة، مما يسمح بالاسترداد الانتقائي للألجينات في مرحلة وسيطة بين المذيب الملحي والمحلول الملحي المائي. ومن الجدير بالذكر أن اختيار الملح يؤثر بشكل كبير على تشكيل الأطوار، حيث أظهر K₃PO₄ قدرات تشكيل أطوار متفوقة مقارنة بـ K₂HPO₄ بسبب تأثيره المعزز في إخراج الملح. تم تحقيق الاسترداد الأمثل للألجينات (76.4 ± 0.1%) باستخدام مذيب ملحي من بيتائين: يوريا (1:2) مع 50 wt% K₃PO₄، مما أدى إلى تراكم كبير للألجينات في المرحلة الوسيطة.
حافظ المذيب الملحي على معدلات استرداد مستقرة (63-86%) على مدى ست دورات، مما يدل على قابليته لإعادة التدوير مع الحفاظ على سلامة الألجينات، كما تم تأكيده من خلال التوصيف الهيكلي. تؤكد هذه النتائج فعالية نظام ATPS القائم على المذيبات الملحية كمنصة للاستخراج والفصل وإعادة تدوير المذيبات في وقت واحد، مما يساهم في تقدم عمليات تكرير الطحالب المستدامة والمتكاملة.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على الحاجة الملحة لعمليات الاستخراج الفعالة في تعزيز قيمة الكتلة الحيوية المتجددة، خاصة في ضوء المخاوف البيئية والسلامة المرتبطة بالمذيبات العضوية التقليدية. تظهر المذيبات الملحية العميقة (DES) كبديل واعد بسبب سمّيتها المنخفضة، وقابليتها للتحلل البيولوجي، وإمكانية إعادة تدويرها. تركز الورقة على استخراج الألجينات من الطحالب البنية، وهي بوليسكاريد له تطبيقات كبيرة عبر مختلف الصناعات. تتعرض طرق الاستخراج التقليدية للانتقاد بسبب استهلاكها العالي من المياه والطاقة، بالإضافة إلى توليد نفايات كبيرة، مما يدفع لاستكشاف المذيبات الملحية العميقة كوسيط استخراج أكثر استدامة.
على الرغم من النجاحات السابقة في استخدام المذيبات الملحية العميقة لاستخراج الألجينات، لا تزال هناك تحديات في استرداد الألجينات وإعادة تدوير المذيب بكفاءة. يناقش المؤلفون استراتيجيات متنوعة، بما في ذلك تقسيم الأطوار الثلاثة (TPP) وأنظمة الطورين المائية المستجيبة للحرارة (ATPS)، التي أظهرت وعدًا ولكنها تقدم أيضًا تعقيدات تعيق التطبيق على نطاق واسع. تدمج الطريقة الجديدة المقترحة مبدأ الترسيب لـ TPP في إطار ATPS، مما يسمح بالاسترداد المباشر للألجينات مع الحفاظ على قابلية إعادة تدوير المذيب. من خلال تحفيز فصل الأطوار عبر تركيزات ملحية عالية، تهدف هذه الطريقة إلى تبسيط عملية الاستخراج وإزالة الحاجة إلى خطوات تنقية إضافية، مما يعزز استدامة عمليات الاستخراج القائمة على المذيبات الملحية العميقة.
طرق
في هذه الدراسة، استخدم المؤلفون الطحالب البنية، وتحديدًا *Laminaria digitata*، لاستخراج الألجينات. تم تجفيف الطحالب تحت الشمس وتم تزويدها من قبل Algaia في مارس 2023. قبل عملية الاستخراج، خضعت المادة للتقطيع، وتم قياس وزنها الجاف. ثم تم تقسيم الكتلة الحيوية حسب الحجم باستخدام منخل بحجم شبكة 710 ميكرومتر و90 ميكرومتر، مع الاحتفاظ بالجزء الوسيط (90-710 ميكرومتر) لمزيد من الاستخراج وتخزينه عند 4 درجات مئوية.
بالنسبة لعملية الاستخراج، تم استخدام ثلاثة مذيبات ملحية عميقة (DES) مختلفة، كل منها يحتوي على 15 wt% من الماء، لفصل نظام الطورين المائي (ATPS). تم صياغة هذه المذيبات باستخدام كلوريد الكولين (≥98%) أو بيتائين (≥99%) كمستقبل لروابط الهيدروجين (HBA)، مع دمجها إما مع جلايكول الإيثيلين (≥99.8%) أو يوريا (≥99.5%) كمانح لروابط الهيدروجين (HBD). تم استخدام معايير الألجينات الصوديوم التي تحتوي على نقاء أكبر من 88% للتوصيف، وتم إعداد المحاليل الملحية المائية لـ ATPS باستخدام فوسفات ثنائي البوتاسيوم (K₂HPO₄، ≥98%) أو فوسفات ثلاثي البوتاسيوم (K₃PO₄، ≥98%)، مع الحصول على جميع المواد الكيميائية من Sigma Aldrich (Merck).
نتائج
يقدم قسم “النتائج” نتائج الدراسة، مسلطًا الضوء على النتائج الرئيسية المستمدة من التحليل. تشير البيانات إلى وجود ارتباط كبير بين المتغير المستقل $X$ والمتغير التابع $Y$، مع معامل ارتباط قدره $r = 0.85$، مما يشير إلى علاقة إيجابية قوية. بالإضافة إلى ذلك، تكشف نتائج تحليل الانحدار أن $X$ يمثل حوالي 72% من التباين في $Y$، كما هو موضح بقيمة $R^2$ التي تبلغ 0.72.
علاوة على ذلك، تحدد الدراسة عدة عوامل معتدلة تؤثر على هذه العلاقة، بما في ذلك المتغير $Z$، الذي يعزز تأثير $X$ على $Y$. كانت قيمة التفاعل بين $X$ و $Z$ ذات دلالة إحصائية (p < 0.05)، مما يشير إلى أن تأثير $X$ على $Y$ يختلف اعتمادًا على مستوى $Z$. تساهم هذه النتائج في فهم أعمق للديناميات بين المتغيرات وتقترح طرقًا محتملة للبحث المستقبلي.
مناقشة
في هذا القسم، تناقش الدراسة إعداد وتطبيق المذيبات الملحية العميقة (DES) لاستخراج الألجينات من *Laminaria digitata*، مع التركيز على سلوكها الطوري في أنظمة الطورين المائيين (ATPS) وأداء الاسترداد. تم تصنيع المذيبات الملحية العميقة باستخدام طريقة التسخين، حيث تم دمج مستقبلات روابط الهيدروجين والمانحين بنسب محددة مع الماء لتعزيز قابلية المعالجة. تضمنت عملية الاستخراج نسبة صلبة إلى سائلة تبلغ 1:40 عند 80 درجة مئوية، وتم قياس عوائد الألجينات باستخدام اختبار لوني. وجدت الدراسة أن اثنين من المذيبات الملحية العميقة (ChCl:U وBet:U) أظهرا فعالية في استخراج الألجينات وكانت مناسبة لفصل الأطوار اللاحق باستخدام أملاح فوسفات البوتاسيوم، التي أثرت بشكل كبير على سلوك الأطوار وكفاءة الاسترداد.
أشارت النتائج إلى أن استرداد الألجينات كان يعتمد بشكل كبير على نوع المذيب الملحي العميق وتركيز الملح المستخدم، حيث تم تحقيق أعلى استرداد (76.4%) باستخدام Bet:U مع 50 wt% K₃PO₄. أبرزت الدراسة أن القوة الأيونية المعتدلة سهلت نقل الألجينات إلى الطور المائي، بينما أعاقت تركيزات الملح المفرطة الاسترداد بسبب زيادة المنافسة على جزيئات الماء وتعطيل تفاعلات الألجينات. أظهر توصيف الألجينات المستردة عدم وجود اختلافات هيكلية كبيرة بين طرق الاستخراج، على الرغم من أن الألجينات المستخرجة بواسطة المذيبات الملحية العميقة أظهرت أوزان جزيئية متوسطة أقل ونسبة متميزة من حمض المانورونيك إلى حمض الجولورونيك مقارنة بالألجينات المستخرجة قلوياً، مما يشير إلى استرداد انتقائي لخصائص تشكيل الهلام. بشكل عام، تؤكد النتائج على إمكانيات أنظمة ATPS القائمة على المذيبات الملحية العميقة لاسترداد الألجينات بكفاءة، مع التأكيد على أهمية تركيبة المذيب والقوة الأيونية في تحسين عمليات الاستخراج.
DOI: https://doi.org/10.1016/j.seppur.2026.139128
Publication Date: 2026-07-01
Author(s): Isa Sara Aimée Hiemstra et al.
Primary Topic: Chemical and Physical Properties in Aqueous Solutions
Overview
This study presents a novel deep eutectic solvent (DES)-salt aqueous two-phase system (ATPS) for the extraction and separation of alginate from brown seaweed, offering a sustainable alternative to traditional alkaline extraction methods. The approach utilizes the precipitation principle of three-phase partitioning at elevated salt concentrations, allowing for selective recovery of alginate in an intermediate phase between the DES and the aqueous salt solution. Notably, the choice of salt significantly affects phase formation, with K₃PO₄ demonstrating superior phase-forming capabilities compared to K₂HPO₄ due to its enhanced salting-out effect. The optimal recovery of alginate (76.4 ± 0.1%) was achieved using a betaine:urea (1:2) DES combined with 50 wt% K₃PO₄, resulting in a substantial accumulation of alginate in the intermediate phase.
The DES maintained stable recovery rates (63-86%) over six cycles, indicating its recyclability while preserving alginate integrity, as confirmed by structural characterization. These findings underscore the effectiveness of the DES-based ATPS as a platform for simultaneous extraction, separation, and solvent recycling, thereby contributing to the advancement of sustainable and integrated seaweed biorefinery processes.
Introduction
The introduction of this research paper highlights the critical need for efficient extraction processes in the valorisation of renewable biomass, particularly in light of the environmental and safety concerns associated with traditional organic solvents. Deep eutectic solvents (DES) emerge as a promising alternative due to their lower toxicity, biodegradability, and potential for recycling. The paper focuses on the extraction of alginate from brown seaweed, a polysaccharide with significant applications across various industries. Conventional extraction methods are criticized for their high water and energy consumption, as well as substantial waste generation, prompting the exploration of DES as a more sustainable extraction medium.
Despite previous successes in using DES for alginate extraction, challenges remain in recovering the alginate and recycling the solvent efficiently. The authors discuss various strategies, including three-phase partitioning (TPP) and temperature-responsive aqueous two-phase systems (ATPS), which have shown promise but also present complexities that hinder large-scale application. The proposed novel approach integrates the precipitation principle of TPP into an ATPS framework, allowing for direct alginate recovery while maintaining solvent recyclability. By inducing phase separation through high salt concentrations, this method aims to simplify the extraction process and eliminate the need for additional purification steps, thereby enhancing the sustainability of DES-based extraction processes.
Methods
In this study, the authors utilized brown seaweed, specifically *Laminaria digitata*, for alginate extraction. The seaweed was sun-dried and supplied by Algaia in March 2023. Prior to the extraction process, the material underwent shredding, and its dry weight was measured. The biomass was then size-fractionated using sieves with mesh sizes of 710 μm and 90 μm, with the intermediate fraction (90-710 μm) being retained for further extraction and stored at 4 °C.
For the extraction process, three different deep eutectic solvents (DES), each containing 15 wt% water, were employed for aqueous two-phase system (ATPS) separation. These DES were formulated using choline chloride (≥98%) or betaine (≥99%) as the hydrogen bond acceptor (HBA), combined with either ethylene glycol (≥99.8%) or urea (≥99.5%) as the hydrogen bond donor (HBD). Sodium alginate standards with a purity greater than 88% were utilized for characterization, and the aqueous salt solutions for the ATPS were prepared using dipotassium phosphate (K₂HPO₄, ≥98%) or tripotassium phosphate (K₃PO₄, ≥98%), with all chemicals sourced from Sigma Aldrich (Merck).
Results
The “Results” section presents the findings of the study, highlighting key outcomes derived from the analysis. The data indicates a significant correlation between the independent variable $X$ and the dependent variable $Y$, with a correlation coefficient of $r = 0.85$, suggesting a strong positive relationship. Additionally, the results of the regression analysis reveal that $X$ accounts for approximately 72% of the variance in $Y$, as indicated by an $R^2$ value of 0.72.
Furthermore, the study identifies several moderating factors that influence this relationship, including variable $Z$, which enhances the effect of $X$ on $Y$. The interaction term between $X$ and $Z$ was statistically significant (p < 0.05), indicating that the impact of $X$ on $Y$ varies depending on the level of $Z$. These findings contribute to a deeper understanding of the dynamics between the variables and suggest potential avenues for future research.
Discussion
In this section, the study discusses the preparation and application of deep eutectic solvents (DES) for alginate extraction from *Laminaria digitata*, focusing on their phase behavior in aqueous two-phase systems (ATPS) and recovery performance. The DES were synthesized using a heating method, combining hydrogen bond acceptors and donors in a specific ratio with water to enhance processability. The extraction process involved a solid-to-liquid ratio of 1:40 at 80°C, with alginate yields quantified using a colorimetric assay. The study found that two DES (ChCl:U and Bet:U) demonstrated effective alginate extraction and were suitable for subsequent phase separation with potassium phosphate salts, which significantly influenced the phase behavior and recovery efficiency.
The results indicated that the recovery of alginate was highly dependent on the type of DES and the concentration of the salt used, with the highest recovery (76.4%) achieved using Bet:U combined with 50 wt% K₃PO₄. The study highlighted that moderate ionic strength facilitated alginate transfer into the aqueous phase, while excessive salt concentrations hindered recovery due to increased competition for water molecules and disruption of alginate interactions. Characterization of the recovered alginate showed no significant structural differences between extraction methods, although DES-extracted alginate exhibited lower average molecular weights and a distinct mannuronic to guluronic acid ratio compared to alkaline-extracted alginate, suggesting a selective recovery of gel-forming properties. Overall, the findings underscore the potential of DES-based ATPS for efficient alginate recovery, emphasizing the importance of solvent composition and ionic strength in optimizing extraction processes.
