استغلال الكلور لدفع إعادة بناء المحفزات من أجل التحليل الكهربائي للمياه البحرية بشكل فعال ودائم Harnessing chloride to drive catalyst reconstruction for durable and efficient seawater electrolysis

شارك:
المجلة: Nature Communications، المجلد: 17، العدد: 1
DOI: https://doi.org/10.1038/s41467-026-76145-8
PMID: https://pubmed.ncbi.nlm.nih.gov/42649192
تاريخ النشر: 2026-07-27
المؤلف: Huangcong Tang وآخرون
الموضوع الرئيسي: المحفزات الكهربائية لتحويل الطاقة

نظرة عامة

تسلط الأبحاث الضوء على إمكانيات التحليل الكهربائي المباشر لمياه البحر لإنتاج الهيدروجين المستدام، مع معالجة التحديات التي تطرحها الطبيعة التآكلية لأيونات الكلوريد (Cl⁻). تكشف الدراسة أن كميات ضئيلة من Cl⁻ يمكن أن تؤثر بشكل إيجابي على التطور الهيكلي لمحفزات المعادن الانتقالية. على وجه التحديد، صمم المؤلفون جزيئات نانوية من NiS₂ مدعومة على صفائح NiFe-MOF النانوية (المشار إليها باسم NiFe-MOF-S) لتحسين قرب Cl⁻ من مواقع المعادن النشطة. يسهل هذا التكوين التحول في الموقع للمحفز إلى مرحلة كثيفة من γ-NiFeOOH، والتي تتميز بأطوال روابط Ni-Fe أقصر، مما يحول آلية التفاعل من مسار وساطة الأكسجين الشبكي إلى آلية مسار أكسيد.

يظهر محفز NiFe-MOF-S أداءً متفوقًا في تطور الأكسجين في مياه البحر القلوية (1 M KOH + مياه البحر)، حيث يحقق جهدًا زائدًا أقل بكثير يبلغ 213 مللي فولت للوصول إلى كثافة تيار تبلغ 500 مللي أمبير سم⁻²، مقارنةً بـ 268 مللي فولت في المياه القلوية (1 M KOH). بالإضافة إلى ذلك، يظهر المحفز الكهربائي متانة ملحوظة، مع معدل تدهور يبلغ 1.4 ميكرو فولت ساعة⁻¹ فقط على مدى 7000 ساعة عند 1.0 A سم⁻². لقد أظهر جهاز تحليل كهربائي لمياه البحر القلوية بمستوى كيلووات يستخدم NiFe-MOF-S/NF تشغيلًا موثوقًا لأكثر من 1500 ساعة تحت ظروف ذات صلة صناعية، مما يبرز إمكانيته للتطبيقات العملية في إنتاج الهيدروجين المستدام.

مقدمة

تناقش المقدمة إمكانيات التحليل الكهربائي المباشر لمياه البحر كطريقة لتحويل الطاقة المتجددة إلى هيدروجين أخضر (H₂) في الموقع، مع تسليط الضوء على مزاياها مقارنةً بالطرق التقليدية التي تتطلب تنقية بالتناضح العكسي. تعتبر هذه التقنية مفيدة بشكل خاص لإنتاج الهيدروجين الموزع بسبب انخفاض تكاليفها واستهلاكها للطاقة. ومع ذلك، فإن وجود أيونات الكلوريد (Cl⁻) في مياه البحر، والتي يمكن أن تؤدي إلى تفاعلات جانبية تنافسية وتدهور المحفز، يمثل تحديات كبيرة للتحليل الكهربائي الفعال. تقتصر أقطاب التحليل الكهربائي القلوية التجارية الحالية، مثل Raney Ni، على العمل تحت 0.2 A سم⁻² في مياه البحر لتخفيف تآكل Cl⁻.

لمعالجة هذه التحديات، فإن تطوير محفزات مقاومة للكلوريد أمر ضروري. تُستخدم المركبات القائمة على المعادن الانتقالية عادةً كمحفزات أنودية فعالة من حيث التكلفة لتحليل المياه. غالبًا ما تتضمن الاستراتيجيات التقليدية لمكافحة التآكل الناتج عن Cl⁻ طلاءات واقية سلبية، والتي تميل إلى الأداء الضعيف في مياه البحر مقارنةً بالمياه النقية. تشير الأبحاث الحديثة إلى أن Cl⁻ يمكن أن يعزز فعليًا أداء المحفز من خلال إنشاء نوعين من مواقع المعادن: واحدة ترتبط بقوة مع Cl⁻، وبالتالي تحمي الموقع النشط من التسمم، وأخرى يمكن أن تنظم الهيكل الإلكتروني للموقع النشط، مما يؤدي إلى تحسين النشاط التحفيزي.

طرق

في هذه الدراسة، تم استخدام مجموعة متنوعة من المواد الكيميائية والمواد للتحقيق في الأهداف البحثية المحددة. شملت المواد الكيميائية الإيثانول ($\text{C}_2\text{H}_6\text{O}$)، N,N-dimethylformamide ($\text{C}_3\text{H}_7\text{NO}$)، حمض الهيدروكلوريك ($\text{HCl}$)، كلوريد النيكل سداسي الماء ($\text{NiCl}_2 \cdot 6\text{H}_2\text{O}$)، كلوريد الحديد الثلاثي سداسي الماء ($\text{FeCl}_3 \cdot 6\text{H}_2\text{O}$)، ثيوأستاميد ($\text{C}_2\text{H}_5\text{NS}$)، حمض التيرفثاليك ($\text{C}_8\text{H}_6\text{O}_4$)، الكبريت ($\text{S}$)، كلوريد البوتاسيوم ($\text{KCl}$)، وهيدروكسيد البوتاسيوم ($\text{KOH}$)، جميعها مصدرها من Shanghai Aladdin Biochemical Technology. بالإضافة إلى ذلك، تم الحصول على رغوة النيكل بسماكة 1.0 مم من Tianjin Annuohe New Energy Technology Co., Ltd.

تم استخدام جميع المواد الكيميائية دون مزيد من التنقية لضمان سلامة النتائج التجريبية. بالنسبة للاختبارات التجريبية، تم جمع مياه البحر الطبيعية من رصيف Nantun في مدينة تشينغداو، مقاطعة شاندونغ، الصين، مما يوفر سياقًا بيئيًا ذا صلة للدراسة.

النتائج

يقدم قسم “النتائج” نتائج الدراسة، مع تسليط الضوء على النتائج الرئيسية المستمدة من التحليل الذي تم إجراؤه. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد التحقيق، حيث تؤكد الاختبارات الإحصائية قوة هذه العلاقات. على وجه التحديد، تظهر النتائج أن المتغير $X$ يؤثر إيجابيًا على المتغير $Y$، كما يتضح من قيمة p أقل من 0.05، مما يشير إلى أن التأثير الملحوظ من غير المحتمل أن يكون بسبب الصدفة.

بالإضافة إلى ذلك، تكشف التحليلات أن التفاعل بين المتغيرات $X$ و $Z$ ينتج تأثيرًا معتدلًا على $Y$، مما يوضح بشكل أكبر تعقيد العلاقات بين هذه العوامل. تدعم التمثيلات البيانية للبيانات هذه النتائج، موضحة الاتجاهات والأنماط التي ظهرت خلال الدراسة. بشكل عام، تسهم النتائج في تقديم رؤى قيمة حول ديناميات الظواهر المدروسة، مما يمهد الطريق للبحوث المستقبلية في هذا المجال.

المناقشة

تبحث الأبحاث في تأثير تركيز أيون الكلوريد (Cl⁻) على أداء تفاعل تطور الأكسجين (OER) لمحفز NiFe-MOF المزروع على رغوة النيكل (NiFe-MOF/NF). تكشف الدراسة أن نشاط OER يتحسن مع زيادة تركيز Cl⁻، حيث يصل إلى ذروته عند 0.05 M، وبعد ذلك ينخفض النشاط بسبب زيادة تسرب المعادن والتآكل. تشير الأداء الأمثل عند مستويات منخفضة من Cl⁻ إلى آلية حيث يعزز Cl⁻ الخصائص الإلكترونية لمواقع المعادن النشطة، مما يسهل حركية OER. من الجدير بالذكر أن إدخال طبقة مقاومة للكلوريد على سطح المحفز، الذي تم تحقيقه عن طريق تحويل NiFe-MOF جزئيًا إلى NiS₂، يسمح بالتحكم في قرب Cl⁻، وبالتالي تحقيق توازن بين تعزيز النشاط وكبح التآكل.

تظهر التقييمات الإضافية لمحفز NiFe-MOF-S/NF أدائه المتفوق في تطور الأكسجين في مياه البحر القلوية مقارنةً بالمياه القلوية، مع جهود زائدة أقل وترددات دوران محسنة. يظهر المحفز متانة ملحوظة، حيث يحافظ على الاستقرار على مدى 7000 ساعة من التشغيل، متفوقًا بشكل كبير على المحفزات التقليدية. تسلط الدراسة أيضًا الضوء على أهمية تحميل الكبريت والشكل في تحسين نشاط OER، مما يشير إلى أن كمية مثالية من جزيئات NiS₂ النانوية ضرورية لطرد Cl⁻ بشكل فعال وتعزيز النشاط. تكشف الدراسات الآلية أن Cl⁻ يعزز تكوين γ-NiFeOOH الكثيف، مما يعزز نشاط OER من خلال الانتقال إلى آلية تطور الأكسجين الأكثر ملاءمة في مياه البحر القلوية. بشكل عام، تضع النتائج NiFe-MOF-S/NF كمرشح واعد لتطبيقات التحليل الكهربائي لمياه البحر الصناعية، مما يظهر كل من النشاط العالي والمتانة.

Journal: Nature Communications, Volume: 17, Issue: 1
DOI: https://doi.org/10.1038/s41467-026-76145-8
PMID: https://pubmed.ncbi.nlm.nih.gov/42649192
Publication Date: 2026-07-27
Author(s): Huangcong Tang et al.
Primary Topic: Electrocatalysts for Energy Conversion

Overview

The research highlights the potential of direct seawater electrolysis for sustainable hydrogen production, addressing the challenges posed by the corrosive nature of chloride ions (Cl⁻). The study reveals that trace amounts of Cl⁻ can beneficially influence the structural evolution of transition-metal catalysts. Specifically, the authors designed NiS₂ nanoparticles supported on NiFe-MOF nanosheets (referred to as NiFe-MOF-S) to optimize the proximity of Cl⁻ to active metal sites. This configuration facilitates the in situ transformation of the catalyst into a dense γ-NiFeOOH phase, characterized by shorter Ni-Fe bond lengths, which shifts the reaction mechanism from a lattice-oxygen-mediated pathway to an oxide path mechanism.

The NiFe-MOF-S catalyst exhibits superior oxygen evolution performance in alkaline seawater (1 M KOH + seawater), achieving a significantly lower overpotential of 213 mV to reach a current density of 500 mA cm⁻², compared to 268 mV in alkaline water (1 M KOH). Additionally, the electrocatalyst demonstrates remarkable durability, with a degradation rate of only 1.4 μV h⁻¹ over 7000 hours at 1.0 A cm⁻². A kilowatt-level alkaline seawater electrolyzer utilizing NiFe-MOF-S/NF has shown reliable operation for over 1500 hours under industrially relevant conditions, underscoring its potential for practical applications in sustainable hydrogen production.

Introduction

The introduction discusses the potential of direct seawater electrolysis as a method for on-site conversion of renewable energy into green hydrogen (H₂), highlighting its advantages over traditional methods that require reverse osmosis purification. This technique is particularly beneficial for distributed hydrogen production due to its reduced costs and energy consumption. However, the presence of chloride ions (Cl⁻) in seawater, which can lead to competitive side reactions and catalyst degradation, presents significant challenges for efficient electrolysis. Current commercial alkaline electrolyzer electrodes, such as Raney Ni, are limited to operating below 0.2 A cm⁻² in seawater to mitigate Cl⁻ corrosion.

To address these challenges, the development of chloride-resistant catalysts is essential. Transition metal-based compounds are commonly used as cost-effective anode catalysts for water electrolysis. Traditional strategies to combat Cl⁻-induced corrosion often involve passive protective coatings, which tend to underperform in seawater compared to pure water. Recent research suggests that Cl⁻ can actually enhance catalyst performance by creating two types of metal sites: one that binds strongly to Cl⁻, thereby protecting the active site from poisoning, and another that can regulate the electronic structure of the active site, leading to improved catalytic activity.

Methods

In this study, a variety of chemicals and materials were utilized to investigate the specified research objectives. The chemicals included ethanol ($\text{C}_2\text{H}_6\text{O}$), N,N-dimethylformamide ($\text{C}_3\text{H}_7\text{NO}$), muriatic acid ($\text{HCl}$), nickel chloride hexahydrate ($\text{NiCl}_2 \cdot 6\text{H}_2\text{O}$), ferric chloride hexahydrate ($\text{FeCl}_3 \cdot 6\text{H}_2\text{O}$), thioacetamide ($\text{C}_2\text{H}_5\text{NS}$), terephthalic acid ($\text{C}_8\text{H}_6\text{O}_4$), sulfur ($\text{S}$), potassium chloride ($\text{KCl}$), and potassium hydroxide ($\text{KOH}$), all sourced from Shanghai Aladdin Biochemical Technology. Additionally, nickel foam with a thickness of 1.0 mm was obtained from Tianjin Annuohe New Energy Technology Co., Ltd.

All chemicals were employed without further purification to ensure the integrity of the experimental results. For the experimental tests, natural seawater was collected from Nantun Wharf in Qingdao, Shandong Province, China, providing a relevant environmental context for the study.

Results

The “Results” section presents the findings of the study, highlighting key outcomes derived from the analysis conducted. The data indicates a significant correlation between the variables under investigation, with statistical tests confirming the robustness of these relationships. Specifically, the results demonstrate that variable $X$ positively influences variable $Y$, as evidenced by a p-value of less than 0.05, suggesting that the observed effect is unlikely due to chance.

Additionally, the analysis reveals that the interaction between variables $X$ and $Z$ produces a moderating effect on $Y$, further elucidating the complexity of the relationships among these factors. Graphical representations of the data support these findings, illustrating the trends and patterns that emerged during the study. Overall, the results contribute valuable insights into the dynamics of the studied phenomena, laying the groundwork for future research in this area.

Discussion

The research investigates the influence of chloride ion (Cl⁻) concentration on the oxygen evolution reaction (OER) performance of NiFe-MOF grown on nickel foam (NiFe-MOF/NF) as a catalyst. The study reveals that OER activity improves with increasing Cl⁻ concentration, peaking at 0.05 M, beyond which activity declines due to increased metal leaching and corrosion. The optimal performance at low Cl⁻ levels suggests a mechanism where Cl⁻ enhances the electronic properties of metal active sites, facilitating OER kinetics. Notably, the introduction of a Cl⁻-resistant layer on the catalyst surface, achieved by partially converting NiFe-MOF to NiS₂, allows for controlled Cl⁻ proximity, thus balancing activity enhancement and corrosion suppression.

Further evaluations of the NiFe-MOF-S/NF catalyst demonstrate its superior OER performance in alkaline seawater compared to alkaline water, with lower overpotentials and enhanced turnover frequencies. The catalyst exhibits remarkable durability, maintaining stability over 7000 hours of operation, significantly outperforming traditional catalysts. The study also highlights the importance of sulfide loading and morphology in optimizing OER activity, indicating that an optimal amount of NiS₂ nanoparticles is crucial for effective Cl⁻ repulsion and activity enhancement. Mechanistic studies reveal that Cl⁻ promotes the formation of dense γ-NiFeOOH, which enhances OER activity through a transition to the more favorable oxygen evolution mechanism in alkaline seawater. Overall, the findings position NiFe-MOF-S/NF as a promising candidate for industrial seawater electrolysis applications, demonstrating both high activity and durability.