الأكانثيت (Ag₂S) كمؤشر على التمعدن المتأخر للفضة في نظام زوار Pb–Zn، راجستان، الهند: رؤى من دراسات المجهر الإلكتروني الماسح (SEM) والمجهر الطيفي بالأشعة السينية المشتتة للطاقة (EDS) Acanthite (Ag₂S) as an indicator of late-stage silver mineralization in the Zawar Pb–Zn system, Rajasthan, India: Insights from Scanning Electron Microscopy (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS) microtextural studies

شارك:
المجلة: The Journal of Indian Geophysical Union، المجلد: 30، العدد: 2
DOI: https://doi.org/10.71122/jigu.30(1)2026.0015
تاريخ النشر: 2026-03-11
المؤلف: Sima Gorai وآخرون
الموضوع الرئيسي: التحليل الجيولوجي والجيوكيميائي

نظرة عامة

تدرس هذه الدراسة حدوث وميزات الميكروتركيبة والتركيب الكيميائي للأكانثيت (Ag₂S) في رواسب زوار في راجستان، الهند، لتوضيح الظروف والعلاقات الباراجينية لتعدين الفضة في هذا النوع من الرواسب الكربونية المستضيفة (MVT). يُنظر تقليديًا إلى الفضة كمنتج ثانوي لاستخراج الرصاص (Pb) والزنك (Zn)، حيث يتم التعرف على الفضة في زوار كأكانثيت في مرحلة متأخرة، والذي يشكل عروقًا مميزة وتجمعات على شكل نجمة على طول الميكرو-شروخ داخل البيريت الموجود مسبقًا. تشير المجهرية الإلكترونية الماسحة (SEM) إلى أن هذه البلورات من الأكانثيت محلية في فتحات ميكروية خاضعة للتحكم الهيكلي، مما يشير إلى الترسيب من السوائل في المرحلة المتأخرة التي استخدمت الهياكل الكبريتيدية الموجودة.

يكشف تحليل طيف الأشعة السينية المشتتة للطاقة (EDS) عن تركيبة تتكون أساسًا من الفضة (Ag) والكبريت (S)، مع كميات ضئيلة فقط من الحديد (Fe) والكالسيوم (Ca)، مما يشير إلى وجود حل صلب محدود أو إدراجات تحت المجهر من كبريتيدات أخرى. يتماشى انتشار الأكانثيت أحادي الميل في المواقع المستضيفة الكربونية المركزة هيكليًا مع الترسيب من المحاليل الملحية القاعدية ذات درجات الحرارة المنخفضة. تشير هذه النتائج مجتمعة إلى أن إثراء الفضة في زوار مرتبط وراثيًا بالمراحل المتناقصة من النشاط الهيدروحراري من نوع MVT، والذي يتميز بالتبريد السريع للسوائل الحاملة للفضة ضد الأسطح الكبريتيدية الأكثر برودة واحتجاز الأكانثيت في إعدادات ميكروتركيبية محددة.

مقدمة

تسلط مقدمة ورقة البحث الضوء على المشهد العالمي لإنتاج الفضة، مع أستراليا والمكسيك والصين وبيرو وروسيا كأكبر المنتجين. في المقابل، فإن الهند، على الرغم من كونها واحدة من أكبر ثلاث دول مستهلكة للفضة، إلا أن مساهمتها في الاحتياطيات العالمية محدودة، والتي تقدر بحوالي 610,000 طن اعتبارًا من عام 2023. تُقدر احتياطيات الفضة في الهند بحوالي 7,700 طن، وتوجد بشكل أساسي كمنتج ثانوي من تنقية الرصاص والزنك والنحاس والذهب، وخاصة في ولايات راجستان وجارخاند وأندرا براديش. تُعتبر رواسب زوار في راجستان ذات أهمية تاريخية واقتصادية، حيث تُعد موقعًا رئيسيًا لإنتاج الفضة وأنشطة التعدين المستمرة من قبل شركة هندستان زنك المحدودة (HZL).

تناقش هذه الفقرة أيضًا الجوانب المعدنية للفضة في رواسب زوار، حيث تستضيف الفضة بشكل أساسي داخل المعادن الخام الرئيسية الجالينا (PbS) والسفاليريت (ZnS). تصف حدوث كبريتيد الفضة (Ag₂S) في ثلاثة أشكال بوليمورفية تعتمد على درجة الحرارة: α-Ag₂S (أكانثيت)، β-Ag₂S (أرجنتيت)، وγ-Ag₂S، كل منها يظهر خصائص هيكلية مميزة وثبات تحت ظروف حرارية متغيرة. تهدف الدراسة إلى وصف الشكل، والإعداد الميكروتركيبي، والتركيب الكيميائي للأكانثيت في رواسب زوار من خلال المجهر الإلكتروني الماسح (SEM) وتحليل طيف الأشعة السينية المشتتة للطاقة (EDS)، مما يعزز الفهم لتعدين الفضة في هذه المنطقة.

طرق

توضح فقرة المنهجية النهج المنهجي المستخدم في البحث. تتفصل في تصميم التجربة، بما في ذلك اختيار المشاركين، وتقنيات جمع البيانات، والأساليب التحليلية المستخدمة لتقييم النتائج. استخدمت الدراسة إطارًا كميًا، مع دمج أدوات إحصائية لتقييم أهمية النتائج.

تم تجنيد المشاركين بناءً على معايير إدراج محددة، مما يضمن عينة تمثيلية لأهداف الدراسة. شمل جمع البيانات أدوات وبروتوكولات موحدة للحفاظ على الاتساق والموثوقية. تم إجراء التحليل باستخدام برامج إحصائية مناسبة، مع تفسير النتائج في سياق فرضيات البحث.

بشكل عام، تؤكد المنهجية على الصرامة وقابلية التكرار، مما يوفر خارطة طريق واضحة للدراسات المستقبلية في هذا المجال. تسهم النتائج المستمدة من هذا النهج في تقديم رؤى قيمة حول الأسئلة البحثية المطروحة.

نتائج

تقدم الدراسة نتائج حول تشكيل بلورات الأكانثيت على شكل نجمة داخل رواسب زوار، والتي ترتبط بشكل أساسي بالبيريت (Py) وتوجد محليًا على طول المناطق المكسورة في حبيبات Py. يشير هذا إلى أن تشكيل الأكانثيت تأثر بمسارات ميكروتركيبية خلال المراحل المتأخرة من التمعدن، مدفوعًا بالتبلور السريع من السوائل الهيدروحرارية الساخنة الغنية بالفضة التي تتفاعل مع ركائز Py الأكثر برودة. يشير وجود الأكانثيت، وهو كبريتيد فضة، إلى أن الفضة تم إدخالها خلال المراحل النهائية من التمعدن عندما كانت كيمياء السوائل تفضل استقرار مركب Ag-S، وهو ما يتماشى مع خصائص التمعدن من نوع وادي ميسيسيبي (MVT).

تسلط الأبحاث الضوء على أن الأكانثيت يهيمن على الأرجنتيت (Arg) في رواسب زوار، مما يشير إلى أن ترسيب الفضة حدث عند درجات حرارة منخفضة (100 °C إلى 200 °C) نموذجية لأنظمة MVT. يؤكد التحليل العنصري عبر EDS التركيبة الكيميائية للأكانثيت كونه يتكون أساسًا من Ag وS، مع عناصر ثانوية مثل Ca وFe. تدعم العلاقة الملحوظة بين الأكانثيت وPy في مناطق الشقوق فرضية الترسيب في المراحل المتأخرة من السوائل الحاملة للفضة المتجهة للأسفل، والتي تفاعلت مع الكبريتيدات والكربونات الموجودة مسبقًا تحت ظروف باردة ومخفضة. تؤكد هذه الأدلة المعدنية على أهمية العمليات الهيدروحرارية ذات درجات الحرارة المنخفضة في ترسيب الفضة في رواسب زوار.

مناقشة

تظهر رواسب زوار، الواقعة ضمن مجموعة أرافالي السليكية في شمال غرب الهند، تمعدنًا كبيرًا ضمن تسلسل كربوني دولوميت سيلسكي من مجموعة أرافالي الوسطى. تتميز هذه المنطقة بوجود طيات بارزة، الطية الرئيسية زوار (MZF) وطية زوارمالا، وكلاهما تطور تحت تحول فيزيائي منخفض ويستضيف عدة مواقع تعدين رئيسية. تم أخذ العينات لهذه الدراسة في مواقع مختلفة داخل رواسب زوار، بما في ذلك بالاريا، موشيا مغرا، باروي مغرا، وزوارمالا، كما هو موضح في الخريطة الجيولوجية.

استخدمت الدراسة المجهر الإلكتروني الماسح (SEM) وطيف الأشعة السينية المشتتة للطاقة (EDS) لتحليل الخصائص الميكروتركيبية والكيميائية لعينات المعادن. تم إجراء تصوير SEM عند جهد تسريع قدره 20 كيلو فولت، مما يسمح بفحص مفصل لمراحل المعادن والعلاقات التركيبية. قدم تحليل EDS، الذي تم أيضًا إجراؤه عند 20 كيلو فولت، بيانات نوعية وكمية حول التركيب العنصري للمعادن، مؤكدًا وجود الفضة بشكل أساسي كأكانثيت (Ag₂S) في تجمعات على شكل نجمة مرتبطة بالبيريت (Py) الذي تشكل مسبقًا. تشير النتائج إلى أن تمعدن الفضة في زوار مرتبط بالنشاط الهيدروحراري في المراحل المتأخرة النموذجية لأنظمة وادي ميسيسيبي (MVT)، والتي تتميز بالتبريد السريع للسوائل الحاملة للفضة ضد الأسطح الكبريتيدية الأكثر برودة والتحكم الهيكلي لترسيب الأكانثيت.

Journal: The Journal of Indian Geophysical Union, Volume: 30, Issue: 2
DOI: https://doi.org/10.71122/jigu.30(1)2026.0015
Publication Date: 2026-03-11
Author(s): Sima Gorai et al.
Primary Topic: Geological and Geochemical Analysis

Overview

This study examines the occurrence, microtextural features, and chemical composition of acanthite (Ag₂S) in the Zawar deposit of Rajasthan, India, to elucidate the conditions and paragenetic relationships of silver mineralization in this Mississippi Valley Type (MVT) carbonate-hosted ore deposit. Traditionally viewed as a by-product of lead (Pb) and zinc (Zn) extraction, silver in Zawar is identified as late-stage acanthite, which forms distinctive veins and star-shaped aggregates along micro-fractures within pre-existing pyrite. Scanning Electron Microscopy (SEM) indicates that these acanthite crystals are localized in structurally controlled micro-openings, suggesting precipitation from late-stage fluids that utilized existing sulfide microstructures.

Energy-dispersive X-ray spectroscopy (EDS) analysis reveals a composition primarily of silver (Ag) and sulfur (S), with only trace amounts of iron (Fe) and calcium (Ca), indicating limited solid solution or sub-microscopic inclusions of other sulfides. The predominance of monoclinic acanthite in structurally focused carbonate-hosted sites aligns with deposition from low-temperature basinal brines. Collectively, these findings suggest that the silver enrichment at Zawar is genetically associated with the waning stages of MVT-type hydrothermal activity, characterized by rapid quenching of Ag-bearing fluids against cooler sulfide surfaces and the confinement of acanthite to specific microstructural settings.

Introduction

The introduction of the research paper highlights the global landscape of silver production, with Australia, Mexico, China, Peru, and Russia as the leading producers. In contrast, India, despite being one of the top three consumers of silver, has a limited contribution to the global reserves, which are approximately 610,000 tonnes as of 2023. India’s silver reserves, estimated at around 7,700 tonnes, are primarily found as a byproduct of lead, zinc, copper, and gold refining, particularly in the states of Rajasthan, Jharkhand, and Andhra Pradesh. The Zawar deposit in Rajasthan is noted for its historical significance and economic importance, being a key site for silver production and ongoing mining activities by Hindustan Zinc Limited (HZL).

The section further discusses the mineralogical aspects of silver in the Zawar deposit, where silver is primarily hosted within the principal ore minerals galena (PbS) and sphalerite (ZnS). It describes the occurrence of silver sulfide (Ag₂S) in three temperature-dependent polymorphs: α-Ag₂S (acanthite), β-Ag₂S (argentite), and γ-Ag₂S, each exhibiting distinct structural characteristics and stability under varying thermal conditions. The study aims to characterize the morphology, microtextural setting, and chemical composition of acanthite in the Zawar deposit through scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses, thereby enhancing the understanding of silver mineralization in this region.

Methods

The methodology section outlines the systematic approach employed in the research. It details the experimental design, including the selection of participants, data collection techniques, and analytical methods used to evaluate the results. The study utilized a quantitative framework, incorporating statistical tools to assess the significance of the findings.

Participants were recruited based on specific inclusion criteria, ensuring a representative sample for the study’s objectives. Data collection involved standardized instruments and protocols to maintain consistency and reliability. The analysis was conducted using appropriate statistical software, with results interpreted in the context of the research hypotheses.

Overall, the methodology emphasizes rigor and replicability, providing a clear roadmap for future studies in this area. The findings derived from this approach contribute valuable insights into the research questions posed.

Results

The study presents findings on the formation of star-shaped acanthite crystals within the Zawar deposit, which are primarily associated with pyrite (Py) and localized along fractured zones in the Py grains. This suggests that the acanthite formation was influenced by microstructural pathways during the late stages of mineralization, driven by rapid quench crystallization from hot, Ag-rich hydrothermal fluids interacting with cooler Py substrates. The presence of acanthite, a silver sulfide, indicates that silver was introduced during the terminal stages of mineralization when the fluid chemistry favored Ag-S complex stability, consistent with the characteristics of Mississippi Valley-type (MVT) mineralization.

The research highlights that acanthite predominates over argentite (Arg) in the Zawar deposit, indicating that silver precipitation occurred at low temperatures (100 °C to 200 °C) typical of MVT systems. The elemental analysis via EDS confirms the composition of acanthite as primarily Ag and S, with minor elements such as Ca and Fe. The observed association of acanthite with Py in fracture zones supports the hypothesis of late-stage precipitation from descending Ag-bearing fluids, which interacted with pre-existing sulfides and carbonates under cool, reducing conditions. This mineralogical evidence underscores the significance of low-temperature hydrothermal processes in the deposition of silver in the Zawar deposit.

Discussion

The Zawar deposit, located within the Proterozoic Aravalli Supergroup in NW India, exhibits significant mineralization within a siliciclastic-dolomitic carbonate succession of the Middle Aravalli Group. This area is characterized by two prominent folds, the Main Zawar Fold (MZF) and the Zawarmala Fold, both of which have developed under lower greenschist facies metamorphism and host several key mining sites. Sampling for this study was conducted at various locations within the Zawar deposit, including Balaria, Mochia Magra, Baroi Magra, and Zawarmala, as illustrated in the geological map.

The investigation utilized Scanning Electron Microscopy (SEM) and Energy-dispersive X-ray Spectroscopy (EDS) to analyze the micro-textural and chemical characteristics of the mineral samples. SEM imaging was performed at an accelerating voltage of 20 kV, allowing for detailed examination of mineral phases and textural relationships. EDS analysis, also conducted at 20 kV, provided qualitative and quantitative data on the elemental composition of the minerals, confirming the presence of silver primarily as acanthite (Ag₂S) in star-shaped aggregates associated with earlier-formed pyrite (Py). The findings suggest that the silver mineralization at Zawar is linked to late-stage hydrothermal activity typical of Mississippi Valley-type (MVT) systems, characterized by the rapid quenching of Ag-bearing fluids against cooler sulfide surfaces and the structural control of acanthite deposition.