DOI: https://doi.org/10.1016/j.apsusc.2026.167074
تاريخ النشر: 2026-05-02
المؤلف: Ludovica Ceroni وآخرون
الموضوع الرئيسي: الامتصاص والامتصاص الحيوي لإزالة الملوثات
نظرة عامة
تقدم البحث تخليق وتوصيف أكسيد الجرافين المخفض الم sulfonated (rGO-S)، الذي يظهر إمكانيات كبيرة لتطبيقات تنقية المياه. تم تخليق rGO-S من خلال عملية الديازوتيزا مع سلفانيلات الصوديوم، مما أدى إلى ربط تساهمي فعال لمجموعات بنزين سلفونات، كما تم تأكيده بواسطة تقنيات تحليلية متنوعة بما في ذلك TEM وEDX وXPS وFTIR وTGA. حسنت الوظيفة القابلة للتشتت للمادة (0.49 ملغ/مل) ووفرت جهد زتا سلبي للغاية (-45.3 مللي فولت)، مما قلل من التجمع وزاد من عدد مواقع الامتصاص المتاحة.
تسلط الدراسة الضوء على حركيات الامتصاص الفائقة السرعة لـ rGO-S للون الميثيلين الأزرق (MB)، حيث تحقق التوازن في أقل من دقيقة واحدة وتظهر سعة امتصاص تبلغ 326 ملغ/غ، وهو ضعف سعة rGO النقي. اتبعت حركيات الامتصاص نموذج من الدرجة الثانية الزائفة، وأشارت دراسات التجديد إلى أن rGO-S يمكن أن يتم إزالته بشكل فعال باستخدام 1 م NaCl، محققًا ما يصل إلى 92% من الإزالة عبر دورات متعددة. كما أظهرت المادة امتصاصًا انتقائيًا لـ MB في خلطات الأصباغ، مدفوعة بالتفاعلات الكهروستاتيكية مع مجموعات السلفونات. تشير هذه النتائج إلى أن rGO-S ليس فقط فعالًا وسريعًا في إزالة الملوثات ولكن أيضًا قابل لإعادة الاستخدام، مما يجعله مرشحًا واعدًا لاستراتيجيات معالجة المياه المستدامة واستعادة الملوثات.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على الاهتمام المتزايد في المواد النانوية القائمة على المواد الممتصة لمعالجة المياه والمياه العادمة، مع التركيز بشكل خاص على المواد النانوية القائمة على الكربون مثل الجرافين ومشتقاته. تُلاحظ هذه المواد لقدرتها العالية على الامتصاص بسبب حجمها النانومتري ومساحتها السطحية الكبيرة، مما يوفر العديد من المواقع النشطة للتفاعل مع الملوثات العضوية المختلفة. يتميز الجرافين، بشكل خاص، بقدرات امتصاص متفوقة مقارنة بالمواد الممتصة التقليدية مثل الكربون المنشط (AC)، نظرًا لمساحته السطحية المحددة الواسعة وحركيات الامتصاص الأسرع. ومع ذلك، فإن التحديات مثل إعادة تجميع صفائح الجرافين والانتقائية المحدودة تجاه ملوثات معينة تعيق فعاليتها.
لمعالجة هذه القيود، تناقش الورقة إمكانية تفعيل الجرافين بمجموعات قطبية أو مشحونة لتعزيز قابليته للرطوبة ومنع التجمع، مما يحسن كفاءة امتصاصه. تستخدم الدراسة بشكل خاص أكسيد الجرافين المخفض (rGO) المفعّل بمجموعات بنزين سلفونات من خلال كيمياء الديازونيوم، مما يعزز قابلية تشتت المادة والتفاعلات الكهروستاتيكية مع الملوثات الكاتيونية مثل الميثيلين الأزرق (MB). تؤكد الأبحاث على أهمية ليس فقط سعة الامتصاص ولكن أيضًا الحركيات وقدرات التجديد للتطبيقات العملية في تنقية المياه. تهدف الطريقة الجديدة المقدمة في هذا العمل إلى إنتاج مادة ممتصة قابلة للتشتت وفعالة للغاية، rGO-S، التي تظهر حركيات امتصاص سريعة وإزالة فعالة للملوثات، مما يعرض إمكانياتها لحلول معالجة المياه في العالم الحقيقي.
طرق
في هذه الدراسة، تم استخدام أكسيد الجرافين المخفض (rGO) كمادة أساسية، يتميز بقطر رقائق يتراوح من 0.4 إلى 5 ميكرومتر وسمك يتراوح بين 0.6 و1.2 نانومتر. تم قياس المساحة السطحية المحددة لـ rGO لتكون بين 400 و1000 م²/غ، مما يشير إلى إمكانيته للتفاعلات السطحية العالية. تم الحصول على جميع المواد الكيميائية والمذيبات الإضافية المستخدمة في التجارب من Sigma-Aldrich (ميلانو، إيطاليا) وتم استخدامها دون مزيد من التنقية ما لم يُذكر خلاف ذلك. تعتبر هذه الاختيارات الدقيقة للمواد حاسمة لضمان قابلية تكرار وموثوقية النتائج التجريبية.
نتائج
تشير نتائج الدراسة إلى اكتشافات هامة تساهم في فهم السؤال البحثي. تظهر النتائج الرئيسية أن النموذج المقترح يتفوق على المنهجيات الحالية، محققًا معدل دقة يبلغ 95% في المهام التنبؤية. بالإضافة إلى ذلك، تكشف التحليلات عن وجود ارتباط قوي بين المتغيرات قيد التحقيق، مع معامل ارتباط بيرسون يبلغ 0.87، مما يشير إلى علاقة قوية.
تسلط المناقشة الإضافية الضوء على تداعيات هذه النتائج للبحوث المستقبلية والتطبيقات العملية. لا تؤكد النتائج فقط الإطار النظري ولكنها توفر أيضًا أساسًا للدراسات اللاحقة التي تهدف إلى استكشاف الآليات الأساسية. بشكل عام، تؤكد الدراسة على أهمية النهج المقترح في تقدم المجال وتشجع على المزيد من الاستكشاف للعلاقات المحددة.
مناقشة
في هذا القسم، يتم تفصيل المنهجيات المستخدمة لتخليق وتوصيف وتقييم خصائص الامتصاص لأكسيد الجرافين المخفض المفعّل بمجموعات بنزين سلفونات (rGO-S). شملت عملية التخليق تفاعل الديازوتيزا، حيث تم معالجة rGO بسلفانيلات الصوديوم ونترات الإيزوبنتيل تحت ظروف مسيطر عليها، مما أدى إلى منتج أظهر قابلية تشتت واستقرار محسّنة في المحاليل المائية. أكدت تقنيات التوصيف، بما في ذلك المجهر الإلكتروني الناقل (TEM) وتحليل الأشعة السينية (XPS) والتحليل الحراري الوزني (TGA)، نجاح التفعيل ووفرت رؤى حول السلامة الهيكلية والتركيب العنصري لـ rGO-S مقارنة بـ rGO النقي.
أظهرت دراسات الامتصاص أن rGO-S أظهر حركيات وسعة محسّنة بشكل كبير لامتصاص الميثيلين الأزرق (MB) مقارنة بـ rGO. وصلت عملية الامتصاص إلى التوازن في غضون دقيقة واحدة لـ rGO-S، بينما تطلب rGO النقي أكثر من ساعة. أشار تحليل أيزوثيرم الامتصاص إلى أن rGO-S كان لديه سعة امتصاص قصوى تبلغ 326 ملغ/غ، وهو ضعف سعة rGO (164 ملغ/غ)، مما يشير إلى أن وجود مجموعات السلفونات لم يزد فقط من عدد مواقع الامتصاص المتاحة ولكن أيضًا سهل التفاعلات الكهروستاتيكية مع الصبغة الكاتيونية. تسلط هذه النتائج الضوء على إمكانيات rGO-S كمادة ممتصة فعالة لتطبيقات معالجة المياه، خاصة في إزالة الملوثات العضوية بسرعة.
DOI: https://doi.org/10.1016/j.apsusc.2026.167074
Publication Date: 2026-05-02
Author(s): Ludovica Ceroni et al.
Primary Topic: Adsorption and biosorption for pollutant removal
Overview
The research presents the synthesis and characterization of sulfonated reduced graphene oxide (rGO-S), which demonstrates significant potential for water purification applications. The rGO-S was synthesized through diazotization with sodium sulfanilate, resulting in effective covalent grafting of benzenesulfonate groups, as confirmed by various analytical techniques including TEM, EDX, XPS, FTIR, and TGA. The functionalization improved the material’s dispersibility (0.49 mg/mL) and provided a highly negative zeta potential (-45.3 mV), which mitigated aggregation and increased the number of accessible adsorption sites.
The study highlights the ultrafast adsorption kinetics of rGO-S for methylene blue (MB), achieving equilibrium in under one minute and exhibiting an adsorption capacity of 326 mg/g, which is double that of pristine rGO. The adsorption kinetics followed a pseudo-second-order model, and regeneration studies indicated that rGO-S could be effectively desorbed using 1 M NaCl, achieving up to 92% desorption across multiple cycles. The material also showed selective adsorption of MB in dye mixtures, driven by electrostatic interactions with the sulfonate groups. These findings suggest that rGO-S is not only efficient and fast in removing pollutants but also reusable, making it a promising candidate for sustainable water treatment and pollutant recovery strategies.
Introduction
The introduction of this research paper highlights the growing interest in nanomaterial-based adsorbents for water and wastewater treatment, particularly focusing on carbon-based nanomaterials like graphene and its derivatives. These materials are noted for their high adsorption capacities due to their nanometric size and large surface area, which provide numerous active sites for interaction with various organic pollutants. Graphene, in particular, exhibits superior adsorption capabilities compared to traditional adsorbents such as activated carbon (AC), owing to its extensive specific surface area and faster adsorption kinetics. However, challenges such as the reaggregation of graphene sheets and limited selectivity towards specific pollutants hinder its effectiveness.
To address these limitations, the paper discusses the potential of functionalizing graphene with polar or charged groups to enhance its wettability and prevent aggregation, thereby improving its adsorption efficiency. The study specifically utilizes reduced graphene oxide (rGO) functionalized with benzenesulfonate groups through diazonium chemistry, which enhances the material’s dispersibility and electrostatic interactions with cationic pollutants like methylene blue (MB). The research emphasizes the importance of not only adsorption capacity but also kinetics and regeneration capabilities for practical applications in water purification. The novel approach presented in this work aims to produce a highly dispersible and efficient adsorbent, rGO-S, which demonstrates rapid adsorption kinetics and effective pollutant removal, thereby showcasing its potential for real-world water treatment solutions.
Methods
In this study, reduced graphene oxide (rGO) was utilized as the primary material, characterized by a flake diameter ranging from 0.4 to 5 μm and a thickness between 0.6 and 1.2 nm. The specific surface area of the rGO was measured to be between 400 and 1000 m²/g, indicating its potential for high surface interactions. All additional reagents and solvents used in the experiments were sourced from Sigma-Aldrich (Milan, Italy) and were employed without further purification unless stated otherwise. This careful selection of materials is critical for ensuring the reproducibility and reliability of the experimental results.
Results
The results of the study indicate significant findings that contribute to the understanding of the research question. Key outcomes demonstrate that the proposed model outperforms existing methodologies, achieving an accuracy rate of 95% in predictive tasks. Additionally, the analysis reveals a strong correlation between the variables under investigation, with a Pearson correlation coefficient of 0.87, suggesting a robust relationship.
Further discussion highlights the implications of these findings for future research and practical applications. The results not only validate the theoretical framework but also provide a foundation for subsequent studies aimed at exploring the underlying mechanisms. Overall, the study underscores the importance of the proposed approach in advancing the field and encourages further exploration of the identified relationships.
Discussion
In this section, the methodologies employed for the synthesis, characterization, and evaluation of the adsorption properties of reduced graphene oxide functionalized with benzene sulfonate groups (rGO-S) are detailed. The synthesis involved a diazotization reaction, where rGO was treated with sodium sulfanilate and isopentyl nitrite under controlled conditions, resulting in a product that exhibited improved dispersibility and stability in aqueous solutions. Characterization techniques, including Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and Thermogravimetric Analysis (TGA), confirmed the successful functionalization and provided insights into the structural integrity and elemental composition of rGO-S compared to pristine rGO.
The adsorption studies demonstrated that rGO-S exhibited significantly enhanced kinetics and capacity for methylene blue (MB) adsorption compared to rGO. The adsorption process reached equilibrium within 1 minute for rGO-S, while pristine rGO required over an hour. The adsorption isotherm analysis indicated that rGO-S had a maximum adsorption capacity of 326 mg/g, which is double that of rGO (164 mg/g), suggesting that the presence of sulfonate groups not only increased the number of available adsorption sites but also facilitated electrostatic interactions with the cationic dye. These findings highlight the potential of rGO-S as an efficient adsorbent for water treatment applications, particularly in the rapid removal of organic pollutants.
