DOI: https://doi.org/10.36922/jse026030005
تاريخ النشر: 2026-03-27
المؤلف: Kyoungmin Lim وآخرون
الموضوع الرئيسي: تقنيات التصوير الزلزالي والعكس
نظرة عامة
تناقش هذه القسم ضرورة نماذج السرعة طويلة الموجة الدقيقة للتصوير تحت السطح الفعال وتقدير الخصائص الجيوفيزيائية. يسلط الضوء على التحديات التي تواجهها في البيئات البحرية الساحلية الضحلة، حيث تحد الظروف المحدودة للاكتساب من استخدام المسافات الطويلة ومصادر التردد المنخفض. نتيجة لذلك، تكافح طرق الانعكاس التقليدية (FWI)، خاصة بسبب هيمنة بيانات الانعكاس ومشكلة تخطي الدورة عندما تكون المكونات ذات التردد المنخفض غير كافية.
لمعالجة هذه التحديات، يقدم المؤلفون نهجًا جديدًا يسمى الانعكاس القائم على الغلاف المباشر (DE-RFWI). يدمج هذه الطريقة معلومات الغلاف المباشر من بيانات الانعكاس لتعزيز إعادة بناء نماذج السرعة طويلة الموجة. يتم إثبات فعالية DE-RFWI من خلال تطبيقه على اختبارات تركيبية تحت ظروف بحرية ضحلة وبيانات ميدانية من خليج يونغيل، كوريا الجنوبية، مما يشير إلى إمكانيته في تحسين دقة نموذج السرعة في البيئات الصعبة.
مقدمة
تتناول مقدمة هذه الورقة البحثية الطلب المتزايد على توصيف دقيق تحت السطح في المناطق الساحلية، مدفوعًا بأنشطة مثل تطوير مزارع الرياح البحرية وتقييم الهياكل البحرية. تقتصر طرق المسح التقليدية مثل أجهزة الصوت متعددة الشعاع (MBES) ومحددات العمق تحت القاع (SBP) على التصوير تحت السطح الضحل بسبب تشغيلها بترددات عالية. في المقابل، يمكن أن تخترق المسوحات الزلزالية البحرية باستخدام البنادق الهوائية والمشعلات أعمق ولكنها مقيدة بالتحديات اللوجستية في المياه الساحلية الضحلة. لمعالجة هذه القيود، تم تطوير المسوحات الزلزالية عالية الدقة (UHR)، مما يسمح بجمع بيانات عالية الدقة من سفن أصغر.
تسلط الورقة الضوء على تحديات الانعكاس التقليدي (FWI) في بيانات هيمنة الانعكاس، حيث تعيق نقص معلومات الفتحة الواسعة بناء نماذج سرعة طويلة الموجة موثوقة. للتخفيف من هذه المشكلة، تم اقتراح الانعكاس الكامل (RFWI)، الذي يستخدم بشكل انتقائي مكون التصوير من بيانات الانعكاس. ومع ذلك، فإن RFWI عرضة لمشكلة تخطي الدورة عندما تكون المكونات ذات التردد المنخفض غير كافية. يقدم المؤلفون نهجًا جديدًا يسمى الانعكاس القائم على الغلاف المباشر (DE-RFWI)، الذي يدمج الانعكاس القائم على الغلاف المباشر (DEI) في RFWI لتعزيز إعادة بناء نموذج السرعة طويلة الموجة في ظروف بيانات التردد المنخفض المحدودة. يتم إثبات فعالية DE-RFWI من خلال المحاكاة العددية والتحقق منها مع البيانات الميدانية، مما يظهر إمكانيته في تحسين التصوير تحت السطح في البيئات البحرية الضحلة.
طرق
توضح قسم المنهجية النهج المنهجي المستخدم في البحث للتحقيق في الفرضيات المحددة. يتفصل التصميم التجريبي، بما في ذلك اختيار المشاركين، وتقنيات جمع البيانات، وإجراءات التحليل. استخدمت الدراسة إطارًا كميًا، حيث تم استخدام طرق إحصائية لتحليل البيانات التي تم جمعها من تجارب مختلفة.
تم تجنيد المشاركين بناءً على معايير إدراج محددة، مما يضمن عينة تمثيلية ذات صلة بأسئلة البحث. شملت جمع البيانات أدوات وبروتوكولات موحدة للحفاظ على الاتساق والموثوقية. تم إجراء التحليل باستخدام برامج إحصائية مناسبة، مع تفسير النتائج في سياق أهداف البحث. تم اشتقاق النتائج الرئيسية من تطبيق الاختبارات الإحصائية، التي قدمت رؤى حول العلاقات والتأثيرات التي لوحظت في الدراسة.
مناقشة
في قسم المناقشة، تتوسع الورقة في التقدمات في الانعكاس الكامل (FWI) ونسخه، مع التركيز بشكل خاص على الانعكاس القائم على الغلاف المباشر (DE-RFWI) المقترح. يهدف FWI إلى إعادة بناء نماذج سرعة تحت السطح عالية الدقة من خلال تقليل الفجوة بين البيانات الزلزالية النموذجية والملاحظة، باستخدام كل من معلومات السعة والطور. يتم تأطير مشكلة التحسين من خلال دالة الفجوة، ويتم حساب التدرج باستخدام المشتقات الجزئية للحقول الموجية. تسلط الورقة الضوء على قيود FWI التقليدي وRFWI، خاصة تعرضها لمشكلة تخطي الدورة في السيناريوهات التي تحتوي على بيانات تردد منخفض غير كافية.
لمعالجة هذه التحديات، يدمج DE-RFWI معلومات الغلاف المباشر، مما يبرز توزيع الطاقة بدلاً من طور الموجة، مما يمكّن من استعادة مستقرة لنماذج السرعة طويلة الموجة من بيانات الانعكاس. تم التحقق من الطريقة من خلال اختبارات تركيبية وتطبيقات ميدانية في خليج يونغيل، كوريا الجنوبية، مما يوضح فعاليتها في إعادة بناء الهياكل الضحلة المعقدة وتحسين دقة نموذج السرعة. تشير النتائج إلى أن DE-RFWI يتفوق على الطرق التقليدية من خلال توفير تقديرات موثوقة للسرعة طويلة الموجة، حتى مع نماذج أولية ضعيفة، مما يعزز الإمكانية للتقييمات الجيوتقنية في البيئات البحرية الضحلة.
DOI: https://doi.org/10.36922/jse026030005
Publication Date: 2026-03-27
Author(s): Kyoungmin Lim et al.
Primary Topic: Seismic Imaging and Inversion Techniques
Overview
The section discusses the necessity of accurate long-wavelength velocity models for effective subsurface imaging and geophysical property estimation. It highlights the challenges faced in coastal shallow marine environments, where limited acquisition conditions restrict the use of long offsets and low-frequency sources. As a result, traditional full waveform inversion (FWI) methods struggle, particularly due to the dominance of reflection data and the issue of cycle skipping when low-frequency components are inadequate.
To address these challenges, the authors introduce a novel approach called direct envelope-based reflection FWI (DE-RFWI). This method integrates direct envelope information from reflection data to enhance the reconstruction of long-wavelength velocity models. The effectiveness of DE-RFWI is demonstrated through its application to synthetic tests under shallow marine conditions and field data from Yeongil Bay, South Korea, indicating its potential to improve velocity model accuracy in challenging environments.
Introduction
The introduction of this research paper addresses the increasing demand for accurate subsurface characterization in coastal regions, driven by activities such as offshore wind farm development and marine structure assessments. Traditional survey methods like multi-beam echo sounders (MBES) and sub-bottom profilers (SBP) are limited to shallow subsurface imaging due to their high-frequency operation. In contrast, marine seismic surveys using airguns and sparkers can penetrate deeper but are constrained by logistical challenges in shallow coastal waters. To address these limitations, ultra-high resolution (UHR) seismic surveys have been developed, allowing for high-resolution data acquisition from smaller vessels.
The paper highlights the challenges of conventional full waveform inversion (FWI) in reflection-dominant data, where the lack of wide-aperture information hampers the construction of reliable long-wavelength velocity models. To mitigate this issue, reflection full waveform inversion (RFWI) has been proposed, which selectively utilizes the tomography component from reflection data. However, RFWI is susceptible to cycle skipping when low-frequency components are inadequate. The authors introduce a novel approach called direct envelope-based RFWI (DE-RFWI), which integrates direct envelope inversion (DEI) into RFWI to enhance long-wavelength model reconstruction under conditions of limited low-frequency data. The effectiveness of DE-RFWI is demonstrated through numerical simulations and validated with field data, showcasing its potential for improving subsurface imaging in shallow marine environments.
Methods
The methodology section outlines the systematic approach employed in the research to investigate the specified hypotheses. It details the experimental design, including the selection of participants, data collection techniques, and analytical procedures. The study utilized a quantitative framework, employing statistical methods to analyze the data gathered from various experiments.
Participants were recruited based on specific inclusion criteria, ensuring a representative sample relevant to the research questions. Data collection involved standardized instruments and protocols to maintain consistency and reliability. The analysis was conducted using appropriate statistical software, with results interpreted in the context of the research objectives. Key findings were derived from the application of statistical tests, which provided insights into the relationships and effects observed in the study.
Discussion
In the discussion section, the paper elaborates on the advancements in Full Waveform Inversion (FWI) and its variants, particularly focusing on the proposed Direct Envelope-based Reflection Full Waveform Inversion (DE-RFWI). FWI aims to reconstruct high-resolution subsurface velocity models by minimizing the misfit between modeled and observed seismic data, utilizing both amplitude and phase information. The optimization problem is framed through a misfit function, and the gradient is computed using partial derivatives of the wavefields. The paper highlights the limitations of conventional FWI and Reflection-based FWI (RFWI), particularly their susceptibility to cycle skipping in scenarios with insufficient low-frequency data.
To address these challenges, DE-RFWI integrates direct envelope information, which emphasizes energy distribution rather than waveform phase, thereby enabling stable recovery of long-wavelength velocity models from reflection data. The method was validated through synthetic tests and field applications in Yeongil Bay, South Korea, demonstrating its effectiveness in reconstructing complex shallow structures and improving velocity model accuracy. The results indicate that DE-RFWI outperforms conventional methods by providing reliable long-wavelength velocity estimates, even with poor initial models, thereby enhancing the potential for geotechnical assessments in shallow marine environments.
