التحقيق الديناميكي الحراري لمركب Ag7GeSe5I والمحاليل الصلبة Ag8-xGeSe6-xIx بواسطة طريقة EMF مع إلكتروليت صلب THERMODYNAMIC INVESTIGATION OF THE Ag7GeSe5I COMPOUND AND Ag8-xGeSe6-xIx SOLID SOLUTIONS BY THE EMF METHOD WITH SOLID ELECTROLYTE

شارك:
المجلة: Chemical Problems، المجلد: 24، العدد: 4
DOI: https://doi.org/10.65382/2221-8688-2026-4-540-552
تاريخ النشر: 2026-01-01
المؤلف: N. A. Bayramova وآخرون
الموضوع الرئيسي: العمليات المعدنية وسبائك المعادن

نظرة عامة

تبحث الدراسة في الخصائص الديناميكية الحرارية لمركب الأرجيروديت Ag\(_7\)GeSe\(_5\)I وحلولها الصلبة Ag\(_{8-x}\)GeSe\(_{6-x}\)I\(_x\) باستخدام طريقة القوة الدافعة الكهربائية (EMF) مع إلكتروليت صلب موصل Ag\(^+\)، Ag\(_4\)RbI\(_5\). للمرة الأولى، تم تحديد اعتماد EMF على درجة الحرارة من خلال قياسات خلايا التركيز في نطاق 300-390 كلفن، مما أدى إلى حساب الوظائف الديناميكية الحرارية الجزئية النسبية للفضة في السبائك. تم بناء مخطط طور لنظام Ag-Ge-Se-I الرباعي، مما سهل اشتقاق معادلات التفاعل المكونة المحتملة وحساب الوظائف الديناميكية الحرارية القياسية للتكوين والانتروبيا للمركبات المدروسة.

تنتج النتائج مجموعة شاملة من البيانات الديناميكية الحرارية لـ Ag\(_7\)GeSe\(_5\)I و Ag\(_{8-x}\)GeSe\(_{6-x}\)I\(_x\) (حيث \(x = 0.2, 0.4, 0.6, 0.8\)). سمحت المعادلات الخطية التي تم تأسيسها والتي تربط EMF بدرجة الحرارة باشتقاق الطاقة الحرة لجيبس النسبية، والإنثالبي، والانتروبيا للفضة في السبائك. يبرز مخطط التوازن الذي تم بناؤه، والذي يستند إلى توازن الطور الصلب لنظام Ag\(_2\)Se-AgI-GeSe\(_2\)، التفاعلات المكونة المحتملة المرتبطة بهذه الكميات الديناميكية الحرارية. تؤكد النتائج على إمكانية هذه الأطوار الأرجيروديت كمواد حرارية كهربائية صديقة للبيئة وموصلات أيونية وإلكترونية.

مقدمة

تناقش المقدمة أهمية الكالكوجينيدات القائمة على النحاس والفضة، وخاصة الأرجيروديت، والتي تُعرف بخصائصها الصديقة للبيئة وتطبيقاتها الوظيفية المتنوعة في تقنيات الطاقة مثل الطاقة الشمسية، والأجهزة الحرارية الكهربائية، والبطاريات، فضلاً عن التقنيات الطبية. تتميز هذه المركبات بالصيغة العامة \( A_m^{+}B_n^{+}X_2^{-}Y^{-} \)، وتظهر موصلية فائقة الأيونية، مما يجعلها مناسبة للاستخدام كأقطاب انتقائية للأيونات وإلكتروليتات صلبة. من الجدير بالذكر أن التعديلات في تركيبها يمكن أن تعزز خصائصها الوظيفية، حيث تُظهر الأرجيروديت القائمة على النحاس والفضة موصلية حرارية شبكية منخفضة وموصلية أيونية عالية، وهو أمر حاسم لتطوير مواد حرارية كهربائية فعالة.

تؤكد هذه الفقرة أيضًا على أهمية فهم توازن الأطوار والخصائص الديناميكية الحرارية في تخليق مواد جديدة متعددة المكونات ذات الخصائص المرغوبة. بينما استكشفت الدراسات السابقة مخططات الأطوار والحلول الصلبة للأرجيروديت الثلاثية القائمة على النحاس والفضة، لا تزال الأرجيروديت المحتوية على الهاليدات تحت البحث. يركز العمل الحالي على التحقيق الديناميكي الحراري للمركب \( \text{Ag}_7\text{GeSe}_5\text{I} \) والحلول الصلبة \( \text{Ag}_{8-x}\text{GeSe}_{6-x}\text{I}_x \) باستخدام قياسات القوة الدافعة الكهربائية (EMF) مع الإلكتروليت الصلب \( \text{Ag}_4\text{RbI}_5 \). تُعتبر هذه الطريقة دقيقة في دراسة توازن الأطوار والخصائص الديناميكية الحرارية، مما يوفر رؤى قيمة تتماشى مع مخططات الأطوار ويسهل استكشاف الكالكوجينيدات المعقدة المحتوية على الفضة.

طرق

في هذا القسم، يصف المؤلفون الطرق التجريبية المستخدمة لقياسات الديناميكا الحرارية باستخدام خلايا التركيز من الشكل (-)Ag(s) | Ag4RbI5(s) | (Ag-in alloy) (+). يُظهر الموصل الفائق الأيونية Ag4RbI5، الذي يذوب عند 505 كلفن، موصلية أيونية عالية لـ Ag⁺ حتى درجة حرارة الغرفة، مما يجعله مناسبًا كإلكتروليت صلب لدراسة الأطوار القائمة على الفضة عبر نطاق واسع من درجات الحرارة. تضمنت عملية تخليق Ag4RbI5 تسخين كميات متناسبة من RbI و AgI في أمبول زجاجي محكم، تلاها التبريد والتقسية لضمان التجانس. تم معالجة القضبان الأسطوانية الناتجة إلى أقراص لاستخدامها في خلايا التركيز.

بالإضافة إلى ذلك، قام المؤلفون بتخليق مركبات مثل GeSe2، Ag8GeSe6، و Ag7GeSe5I لسبائك الأقطاب من خلال الانصهار المشترك لمخاليط عنصرية عالية النقاء في أمبولات زجاجية محكمة. تم تأكيد نقاء الطور لهذه المركبات عبر تحليل حيود الأشعة السينية (XRD) والتحليل الحراري التفاضلي (DTA). خضعت السبائك المُصنّعة لتقسية حرارية تدريجية، وتم التحقق من تركيباتها الطورية عبر XRD. يوضح القسم تعقيد توازن الأطوار في نظام Ag2Se-AgI-GeSe2، مما يبرز أهمية بيانات الطور الموثوقة لحسابات الديناميكا الحرارية الدقيقة والتخطيط التجريبي. تم تجميع خلايا القياس الكهروكيميائية لقياسات EMF بعناية والحفاظ عليها عند درجات حرارة مضبوطة لضمان جمع بيانات دقيقة.

نتائج

أظهر تحليل قياسات القوة الدافعة الكهربائية (EMF) للخلايا من النوع (1) أنه ضمن نطاق درجات الحرارة المدروسة، تُظهر منحنيات EMF سلوكًا أحادي الاتجاه فيما يتعلق بالتكوين. تدعم هذه الملاحظة وجود سلسلة مستمرة من الحلول الصلبة (δ-phase) على طول قسم Ag8GeSe6-Ag7GeSe5I. وُجد أن اعتماد درجة الحرارة لكل سبيكة أقطاب كان خطيًا، كما هو موضح في الشكل 3. تمت معالجة بيانات EMF باستخدام طريقة المربعات الصغرى، مع افتراض الخطية، مما أدى إلى معادلات من الشكل:

\[
E = a + b(T – T_0) \pm S
\]

حيث يمثل \( n \) عدد أزواج بيانات EMF ودرجة الحرارة، و\( S_E \) و\( S_b \) تشير إلى تباينات قياسات EMF الفردية ومعامل الميل \( b \)، على التوالي. يتم الإشارة إلى متوسط درجة الحرارة المطلقة بـ \( T \)، و\( t \) هو إحصاء t لستودنت. عند مستوى ثقة 95% مع \( n \geq 20 \)، يتم تقييد قيمة ستودنت \( t \) إلى \( t \leq 2.1 \) و2.2. تلخص المعادلات الناتجة في الجدول 1.

علاوة على ذلك، تم حساب الوظائف الديناميكية الحرارية الجزئية النسبية للفضة في السبائك باستخدام العلاقات المعمول بها، كما هو موضح في الجدول 2 والشكل 4. استخدمت هذه الحسابات معادلات تربط الطاقة الحرة لجيبس (\( \Delta G \))، والإنثالبي (\( \Delta H \))، والانتروبيا (\( \Delta S \)) بقياسات EMF، مما يوفر توصيفًا ديناميكيًا حراريًا شاملاً للسبائك الفضية المدروسة.

نقاش

في هذا القسم، يناقش المؤلفون الإعداد التجريبي والنتائج المتعلقة بالخصائص الديناميكية الحرارية للمركب Ag7GeSe5I وحلولها الصلبة، Ag8-xGeSe6-xIx. باستخدام ثنائيات حرارية من الألوميل ومقياس فولت رقمي عالي المقاومة، قاموا بقياس القوة الدافعة الكهربائية (EMF) في نطاق درجات الحرارة من 300-390 كلفن، مع ضمان تلبية شروط التوازن من خلال قراءات EMF متسقة. أكدت قابلية تكرار النتائج واستقرار الكتلة وتركيبات الطور خلال التجارب على قابلية عكس خلايا التركيز المُنشأة.

يقدم المؤلفون تحليلًا مفصلًا للكمية المولية الجزئية للفضة، التي تُظهر سلوكًا مستمرًا وأحادي الاتجاه عبر التركيبات، كما هو موضح في مخطط توازن الطور الصلب الذي تم بناؤه. يستخرجون تفاعلات مكونة محتملة ويحسبون الطاقة الحرة لجيبس القياسية والإنثالبي للتكوين لـ Ag7GeSe5I، جنبًا إلى جنب مع الوظائف الديناميكية الحرارية القياسية للحلول الصلبة. من الجدير بالذكر أنه بينما تبدو الوظائف الديناميكية الحرارية غير متغيرة مع التركيب، يُعزى ذلك إلى العدد المختلف من الذرات لكل وحدة صيغة. تسلط البيانات الديناميكية الحرارية الشاملة التي تم الحصول عليها الضوء على إمكانية هذه الأطوار الأرجيروديت كمواد حرارية كهربائية صديقة للبيئة وموصلات أيونية وإلكترونية، مما يمثل تقدمًا كبيرًا في فهم نظام Ag-Ge-Se-I.

Journal: Chemical Problems, Volume: 24, Issue: 4
DOI: https://doi.org/10.65382/2221-8688-2026-4-540-552
Publication Date: 2026-01-01
Author(s): N. A. Bayramova et al.
Primary Topic: Metallurgical and Alloy Processes

Overview

The research investigates the thermodynamic properties of the argyrodite compound Ag\(_7\)GeSe\(_5\)I and its solid solutions Ag\(_{8-x}\)GeSe\(_{6-x}\)I\(_x\) using the electromotive force (EMF) method with a solid Ag\(^+\)-conducting electrolyte, Ag\(_4\)RbI\(_5\). For the first time, the temperature dependence of the EMF was established through measurements of concentration cells in the 300-390 K range, leading to the calculation of relative partial thermodynamic functions for silver in the alloys. A phase diagram for the quaternary Ag-Ge-Se-I system was constructed, which facilitated the derivation of potential-forming reaction equations and the computation of standard thermodynamic functions of formation and entropies for the studied compounds.

The findings yield a comprehensive set of thermodynamic data for Ag\(_7\)GeSe\(_5\)I and Ag\(_{8-x}\)GeSe\(_{6-x}\)I\(_x\) (where \(x = 0.2, 0.4, 0.6, 0.8\)). The established linear equations relating EMF to temperature allowed for the derivation of relative Gibbs free energy, enthalpy, and entropy of silver in the alloys. The constructed equilibria diagram, informed by the solid-phase equilibria of the Ag\(_2\)Se-AgI-GeSe\(_2\) system, highlights the potential-forming reactions linked to these thermodynamic quantities. The results underscore the potential of these argyrodite phases as environmentally friendly thermoelectric materials and ionic-electronic conductors.

Introduction

The introduction discusses the significance of copper- and silver-based chalcogenides, particularly argyrodites, which are recognized for their environmentally friendly properties and diverse functional applications in energy technologies such as photovoltaics, thermoelectric devices, and batteries, as well as in medical technologies. These compounds, characterized by the general formula \( A_m^{+}B_n^{+}X_2^{-}Y^{-} \), exhibit superionic conductivity, making them suitable for use as ion-selective electrodes and solid electrolytes. Notably, modifications in their composition can enhance their functional properties, with copper- and silver-based argyrodites demonstrating low lattice thermal conductivity and high ionic conductivity, which are crucial for developing efficient thermoelectric materials.

The section further emphasizes the importance of understanding phase equilibria and thermodynamic characteristics in synthesizing new multi-component materials with desired properties. While previous studies have explored the phase diagrams and solid solutions of ternary copper and silver argyrodites, halide-containing argyrodites remain under-researched. The current work focuses on the thermodynamic investigation of the compound \( \text{Ag}_7\text{GeSe}_5\text{I} \) and solid solutions \( \text{Ag}_{8-x}\text{GeSe}_{6-x}\text{I}_x \) using electromotive force (EMF) measurements with the solid electrolyte \( \text{Ag}_4\text{RbI}_5 \). This method is noted for its precision in studying phase equilibria and thermodynamic properties, providing valuable insights consistent with phase diagrams and facilitating the exploration of complex silver-containing chalcogenides.

Methods

In this section, the authors describe the experimental methods employed for thermodynamic measurements using concentration cells of the form (-)Ag(s) | Ag4RbI5(s) | (Ag-in alloy) (+). The superionic conductor Ag4RbI5, which melts at 505 K, demonstrates high Ag⁺ ionic conductivity down to room temperature, making it suitable as a solid electrolyte for studying silver-based phases across a broad temperature range. The synthesis of Ag4RbI5 involved heating stoichiometric amounts of RbI and AgI in a vacuum-sealed quartz ampoule, followed by cooling and annealing to ensure homogeneity. The resulting cylindrical ingots were processed into discs for use in the concentration cells.

Additionally, the authors synthesized compounds such as GeSe2, Ag8GeSe6, and Ag7GeSe5I for electrode alloys through co-melting high-purity elemental mixtures in sealed quartz ampoules. The phase purity of these compounds was confirmed via X-ray diffraction (XRD) and differential thermal analysis (DTA). The synthesized alloys underwent stepwise thermal annealing, and their phase compositions were verified by XRD. The section illustrates the complexity of the phase equilibria in the Ag2Se-AgI-GeSe2 system, highlighting the importance of reliable phase data for accurate thermodynamic calculations and experimental planning. The electrochemical cells for EMF measurements were carefully assembled and maintained at controlled temperatures to ensure precise data collection.

Results

The analysis of electromotive force (EMF) measurements for cells of type (1) revealed that within the studied temperature range, the EMF isotherms exhibit monotonic behavior with respect to composition. This observation supports the existence of a continuous series of solid solutions (δ-phase) along the Ag8GeSe6-Ag7GeSe5I section. The temperature dependence of each electrode alloy was found to be linear, as illustrated in Figure 3. The EMF data were processed using the least-squares method, assuming linearity, leading to equations of the form:

\[
E = a + b(T – T_0) \pm S
\]

where \( n \) represents the number of EMF and temperature data pairs, \( S_E \) and \( S_b \) denote the variances of the individual EMF measurements and the slope coefficient \( b \), respectively. The mean absolute temperature is denoted by \( T \), and \( t \) is the Student’s t-statistic. At a 95% confidence level with \( n \geq 20 \), the Student’s value \( t \) is constrained to \( t \leq 2.1 \) and 2.2. The resulting equations are summarized in Table 1.

Furthermore, the relative partial thermodynamic functions of silver in the alloys were calculated using established relationships, as shown in Table 2 and Figure 4. These calculations utilized equations that relate Gibbs free energy (\( \Delta G \)), enthalpy (\( \Delta H \)), and entropy (\( \Delta S \)) to the EMF measurements, providing a comprehensive thermodynamic characterization of the silver alloys studied.

Discussion

In this section, the authors discuss the experimental setup and findings related to the thermodynamic properties of the compound Ag7GeSe5I and its solid solutions, Ag8-xGeSe6-xIx. Using alumel thermocouples and a high-impedance digital voltmeter, they measured the electromotive force (EMF) in the temperature range of 300-390 K, ensuring equilibrium conditions were met through consistent EMF readings. The reproducibility of results and the stability of mass and phase compositions during the experiments confirmed the reversibility of the concentration cells constructed.

The authors present a detailed analysis of the partial molar quantities of silver, which exhibit continuous and monotonic behavior across compositions, as illustrated in their constructed solid-phase equilibria diagram. They derive potential-forming reactions and calculate the standard Gibbs free energy and enthalpy of formation for Ag7GeSe5I, alongside the standard thermodynamic functions for the solid solutions. Notably, while the thermodynamic functions appear invariant with composition, this is attributed to the differing number of atoms per formula unit. The comprehensive thermodynamic data obtained highlights the potential of these argyrodite phases as eco-friendly thermoelectric materials and ionic-electronic conductors, marking a significant advancement in the understanding of the Ag-Ge-Se-I system.