التحكم في الطور المدفوع بالأكسدة الحرارية للهجائن CuO-Cu2O على الركائز النحاسية من أجل وظائف بصرية قابلة للتعديل Thermal Oxidation-Driven Phase Control of CuO-Cu2O Hybrids on Copper Substrates for Tunable Optical Functionalities

شارك:
المجلة: Trends in Sciences، المجلد: 23، العدد: 5
DOI: https://doi.org/10.48048/tis.2026.11806
تاريخ النشر: 2026-01-01
المؤلف: Chaiyuth Nontakoat وآخرون
الموضوع الرئيسي: المواد النانوية القائمة على النحاس وتطبيقاتها

نظرة عامة

تبحث هذه الدراسة في تخليق وخصائص مواد الهجين CuO-Cu2O التي تم إنتاجها من خلال أكسدة حرارية أحادية الخطوة لألواح النحاس عند درجات حرارة تتراوح من 300 إلى 700 درجة مئوية. تستخدم الدراسة تقنيات تحليلية متنوعة، بما في ذلك حيود الأشعة السينية (XRD)، وطيف الأشعة تحت الحمراء بتحويل فورييه (FT-IR)، والضوء المنبعث (PL)، وطيف الأشعة فوق البنفسجية والمرئية (UV-Vis)، لتحليل التحولات الطورية، والتغيرات الميكروهيكلية، والخصائص البصرية للمواد. تشير نتائج XRD إلى تحول في تركيب الطور، مع Cu2O كطور رئيسي وCuO كطور ثانوي، خاصة عند 700 درجة مئوية، حيث تحدث أكسدة محدودة الانتشار. تُظهر طريقة الأكسدة الحرارية تحسينًا في فصل الطور والنقاء البلوري مقارنةً بالتخليق التقليدي القائم على المحاليل.

تكشف النتائج أن فجوة الطاقة للمواد المُصنعة قابلة للتعديل، حيث تتراوح من 2.60 eV عند 300 درجة مئوية إلى 2.55 eV عند 700 درجة مئوية، متأثرة بالهجين الطوري وحالات العيوب. يُظهر العينة عند 700 درجة مئوية أقل إجهاد ميكروي، وأكبر حجم بلوري، وأقرب معلمات شبكية إلى القيم القياسية، إلى جانب أقوى قمم اهتزاز Cu-O في تحليل FT-IR. بالإضافة إلى ذلك، تُظهر تحليل امتصاص UV-Vis أن العينة عند 700 درجة مئوية لديها أضيق فجوة طاقة وأفضل الخصائص البصرية، مما يشير إلى تحسين اختراق الضوء وتقليل تشتت الفوتونات. يشير تحليل PL إلى وجود فراغات أكسجين ومواضع نحاسية تساهم في ميزات الانبعاث المرئي. بشكل عام، تسلط هذه الدراسة الضوء على تأثير الظروف الحرارية على الخصائص الهيكلية والبصرية لأكاسيد النحاس، مما يمهد الطريق للتقدم في التطبيقات البصرية الإلكترونية.

مقدمة

تسلط مقدمة ورقة البحث الضوء على أهمية أكاسيد النحاس، وخاصة أكسيد النحاس(I) (Cu₂O) وأكسيد النحاس(II) (CuO)، كمواد شبه موصلة واعدة بسبب خصائصها الفيزيائية والكيميائية الفريدة وفوائدها البيئية. يُظهر Cu₂O فجوة طاقة مباشرة تتراوح من 2.0 إلى 2.6 eV، بينما يحتوي CuO على فجوة طاقة غير مباشرة تتراوح من 1.2 إلى 1.9 eV، مما يسهل كفاءة امتصاص الضوء المرئي والتطبيقات الإلكترونية. يعزز تشكيل تقاطع هجين p-p من خلال دمج Cu₂O وCuO فصل الشحنات وحركة الحاملات الناتجة عن الضوء، مما يجعل هذه المواد مناسبة للتطبيقات في الطاقة الشمسية، والتحفيز الضوئي، والبصريات الإلكترونية.

تؤكد الورقة على مزايا الأكسدة الحرارية لركائز النحاس كطريقة قابلة للتوسع وفعالة من حيث التكلفة لإنتاج أفلام أكسيد النحاس، مما يلغي الحاجة إلى سوائل سامة ويسمح بالتحكم الدقيق في مراحل الأكسيد من خلال التلدين. تهدف الدراسة إلى سد فجوة معرفية بشأن مسارات الأكسدة المحدودة الانتشار وتأثيراتها على الخصائص البصرية لهجائن CuO-Cu₂O. من خلال دراسة التحولات الطورية والخصائص البلورية عند درجات حرارة تلدين مختلفة، تسعى البحث إلى إقامة علاقات بين التغيرات الميكروهيكلية والخصائص البصرية، بما في ذلك طاقات فجوة الطاقة والضوء المنبعث. من الجدير بالذكر أن استمرار Cu₂O عند درجات حرارة أكسدة عالية يتحدى التوقعات التقليدية ويؤكد على أهمية فهم هذه الآليات لتحسين الخصائص البصرية الإلكترونية لأنظمة أكسيد النحاس للتطبيقات التكنولوجية.

طرق

في هذه الدراسة، تم تخليق مواد CuO-Cu2O من خلال الأكسدة الحرارية لألواح النحاس عند درجات حرارة 300 و500 و700 درجة مئوية، مع الحفاظ على معدل تسخين ثابت قدره 5 درجات مئوية/دقيقة لمدة ساعتين. تم إجراء عملية الأكسدة تحت ضغط جوي للتركيز على تأثيرات درجة الحرارة على التحول الطوري، مع الحد الأقصى لدرجة الحرارة المحددة عند 700 درجة مئوية لمنع تكبير الحبوب وفقدان الأكسجين، كما هو مذكور في الأدبيات السابقة. تم معالجة ألواح النحاس، التي تقيس 10×45×0.5 مم³، مسبقًا في محلول حمض النيتريك بنسبة 2% v/v لمدة 30 دقيقة، تلاها شطف في الإيثانول المطلق والماء منزوع الأيونات. تم تصنيف العينات وفقًا لدرجات حرارة التسخين الخاصة بها: 300Cu، 500Cu، و700Cu.

شمل توصيف المواد المُصنعة عدة تقنيات. تم إجراء تحليل الطور باستخدام حيود الأشعة السينية (XRD) مع إشعاع Cu Kα على مدى زاوية 2θ من 20° إلى 80°، مع الإشارة إلى قاعدة بيانات لجنة المعايير المشتركة لحيود المساحيق (JCPDS). تم فحص شكل المساحيق عبر المجهر الإلكتروني الماسح (SEM) المدمج مع التحليل الطيفي بالأشعة السينية المشتتة للطاقة (EDX). تم تحليل اهتزازات الروابط الهيكلية باستخدام طيف الأشعة تحت الحمراء بتحويل فورييه (FTIR) عبر نطاق 400-4,000 سم⁻¹. بالإضافة إلى ذلك، تم تقييم الخصائص البصرية باستخدام مطياف UV-Vis الذي يقيس الأطوال الموجية من 400 إلى 800 نانومتر، وتم تحديد العيوب الجوهرية من خلال التحليل الطيفي للضوء المنبعث (PL) عند طول موجي تحفيزي قدره 369 نانومتر في درجة حرارة الغرفة.

نتائج

تكشف نتائج الدراسة حول الأكسدة الحرارية لألواح النحاس عن تسلسل منهجي من التحولات الطورية المتأثرة بدرجة حرارة التلدين وديناميات انتشار الأكسجين. تتقدم مسار الأكسدة من النحاس المعدني (Cu) إلى أكسيد النحاس(I) (Cu2O) وأخيرًا إلى أكسيد النحاس(II) (CuO). عند درجات حرارة منخفضة (حوالي 150-250 درجة مئوية)، تحدث أكسدة جزئية، مما يؤدي إلى تشكيل Cu2O، الذي يتميز بهيكله البلوري المكعب. مع زيادة درجة الحرارة إلى 250-350 درجة مئوية، يتم أكسدة أيونات Cu+ في Cu2O إلى Cu2+، مما يؤدي إلى تشكيل CuO أحادي الميل من خلال آلية تحكم الانتشار. يتم وصف هذا التحول كميًا بواسطة المعادلات:

\[
2Cu + \frac{1}{2}O_2 \rightarrow Cu_2O \quad (1)
\]
\[
Cu_2O + \frac{1}{2}O_2 \rightarrow 2CuO \quad (2)
\]

تؤكد تحليل حيود الأشعة السينية (XRD) على وجود هذه الأطوار عند درجات حرارة مختلفة، مع ملاحظة أكسدة كاملة عند 500 درجة مئوية، حيث تختفي قمم Cu وتسيطر أطوار Cu2O وCuO. تسلط الدراسة أيضًا الضوء على دور الإجهاد الحراري والتشوه الهيكلي في تسهيل الأكسدة، فضلاً عن أهمية فراغات الأكسجين في التحولات الطورية.

عند درجات حرارة أعلى (700 درجة مئوية)، يتحسن نقاء CuO-Cu2O المركب، على الرغم من أن وجود Cu2O يتعارض مع النتائج السابقة التي اقترحت تشكيل CuO عند درجات حرارة منخفضة. تشير النتائج إلى أن حركية الأكسدة المحدودة الانتشار تؤدي إلى هيكل ثنائي الطبقات من CuO وCu2O، مع إمكانية عودة CuO إلى Cu2O عند درجات حرارة مرتفعة. تم تحليل تركيب الطور بشكل أكبر باستخدام طريقة ريتفيلد، مما يبرز التفاعل المعقد بين درجة الحرارة، وحالات الأكسدة، والتغيرات الهيكلية خلال عملية الأكسدة.

مناقشة

في هذه الدراسة، تم التحقيق في الأكسدة الحرارية لألواح النحاس عند درجات حرارة مختلفة (300 درجة مئوية، 500 درجة مئوية، و700 درجة مئوية) لفهم تطور الطور، والسلوك الميكروهيكلي، والخصائص البصرية لمواد الهجين CuO-Cu2O. تم الحصول على ملفات معلومات البلورات (CIFs) للأطوار المعنية، مما يكشف عن اتجاه أكسدة مدفوع بدرجة الحرارة يتميز بسيطرة النحاس عند 300 درجة مئوية (98.88 wt%)، ينتقل إلى كميات كبيرة من Cu2O (71.05 wt%) وCuO (28.95 wt%) عند 500 درجة مئوية، واستمرار Cu2O عند 700 درجة مئوية (68.22 wt%). تشير النتائج إلى أن التنشيط الحراري يؤثر على النقاء البلوري، حيث تتناقص معلمات الشبكة في البداية بسبب الإجهاد الناتج عن الأكسدة، تليها توسع عند درجات حرارة أعلى بسبب الاسترخاء الحراري وزيادة محتوى الأكسجين.

أكد تحليل حيود الأشعة السينية (XRD) أن العينة عند 700 درجة مئوية أظهرت أكبر حجم بلوري وأقل إجهاد ميكروي، مما يدل على تحسين النظام الهيكلي. تم تقييم الخصائص البصرية من خلال مطياف UV-Vis، مما يكشف عن تغير في فجوة الطاقة قدره 2.60 eV (300Cu)، 2.69 eV (500Cu)، و2.55 eV (700Cu)، المنسوبة إلى الهجين الطوري وحالات العيوب. أظهرت عينة 700Cu تحسينًا في الشفافية البصرية، حيث تميزت بأقل كثافة بصرية وأعلى عمق جلدي، مما يشير إلى اختراق ضوء متفوق. أشار تحليل الضوء المنبعث (PL) إلى أن الانبعاثات المرتبطة بالعيوب كانت بارزة في العينات ذات درجات الحرارة المنخفضة، بينما أدت درجات الحرارة الأعلى إلى تقليل إعادة التركيب غير الإشعاعي، مما يعزز شدة الانبعاث. بشكل عام، تؤكد النتائج على التأثير الكبير للظروف الحرارية على الخصائص الهيكلية والبصرية لأكاسيد النحاس، مما يوفر رؤى للتطبيقات البصرية الإلكترونية المستقبلية.

Journal: Trends in Sciences, Volume: 23, Issue: 5
DOI: https://doi.org/10.48048/tis.2026.11806
Publication Date: 2026-01-01
Author(s): Chaiyuth Nontakoat et al.
Primary Topic: Copper-based nanomaterials and applications

Overview

This research investigates the synthesis and properties of CuO-Cu2O hybrid materials produced via a single-step thermal oxidation of copper plates at temperatures ranging from 300 to 700 °C. The study employs various analytical techniques, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence (PL), and UV-Vis spectroscopy, to analyze the phase transitions, microstructural changes, and optical characteristics of the materials. XRD results indicate a transformation in phase composition, with Cu2O as the primary phase and CuO as a minor phase, particularly at 700 °C, where diffusion-limited oxidation occurs. The thermal oxidation method demonstrates improved phase separation and crystallinity compared to traditional solution-based synthesis.

The findings reveal that the bandgap of the synthesized materials is tunable, ranging from 2.60 eV at 300 °C to 2.55 eV at 700 °C, influenced by phase hybridization and defect states. The 700 °C sample exhibits the lowest microstrain, largest crystallite size, and closest lattice parameters to standard values, alongside the most intense Cu-O vibration peaks in FT-IR analysis. Additionally, UV-Vis absorption analysis shows that the 700 °C sample has the narrowest bandgap and optimal optical properties, suggesting enhanced light penetration and reduced photon scattering. PL analysis indicates the presence of oxygen vacancies and copper interstitials contributing to visible emission features. Overall, this study highlights the impact of thermal conditions on the structural and optical properties of Cu-based oxides, paving the way for advancements in optoelectronic applications.

Introduction

The introduction of the research paper highlights the significance of copper oxides, particularly cuprous oxide (Cu₂O) and cupric oxide (CuO), as promising semiconductors due to their unique physicochemical properties and environmental benefits. Cu₂O exhibits a direct bandgap of 2.0 to 2.6 eV, while CuO has an indirect bandgap ranging from 1.2 to 1.9 eV, both facilitating effective visible-light absorption and electronic applications. The formation of a p-p heterojunction by combining Cu₂O and CuO enhances charge separation and the mobility of photogenerated carriers, making these materials suitable for applications in photovoltaics, photocatalysis, and optoelectronics.

The paper emphasizes the advantages of thermal oxidation of copper substrates as a scalable and cost-effective method for producing Cu-based oxide films, eliminating the need for toxic precursors and allowing precise control over the oxide phases through annealing. The study aims to fill a knowledge gap regarding the diffusion-limited oxidation pathways and their effects on the optical properties of CuO-Cu₂O hybrids. By investigating the phase transitions and crystallographic properties at various annealing temperatures, the research seeks to establish correlations between microstructural changes and optical characteristics, including bandgap energies and photoluminescence. Notably, the persistence of Cu₂O at high oxidation temperatures challenges traditional expectations and underscores the importance of understanding these mechanisms for optimizing the opto-electronic properties of copper oxide systems for technological applications.

Methods

In this study, CuO-Cu2O materials were synthesized through thermal oxidation of copper plates at temperatures of 300, 500, and 700 °C, maintaining a consistent heating rate of 5 °C/min for 2 hours. The oxidation process was conducted under ambient pressure to focus on the effects of temperature on phase transformation, with the maximum temperature limited to 700 °C to prevent grain coarsening and oxygen loss, as noted in previous literature. The copper plates, measuring 10×45×0.5 mm³, were pre-treated in a 2% v/v nitric acid solution for 30 minutes, followed by rinsing in absolute ethanol and deionized water. The samples were labeled according to their respective heating temperatures: 300Cu, 500Cu, and 700Cu.

Characterization of the synthesized materials involved several techniques. Phase analysis was conducted using X-ray diffraction (XRD) with Cu Kα radiation over a 2θ range of 20° to 80°, referencing the Joint Committee on Powder Diffraction Standards (JCPDS) database. The morphology of the powders was examined via scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDX). Structural bonding vibrations were analyzed using Fourier transform infrared spectroscopy (FTIR) across the 400-4,000 cm⁻¹ range. Additionally, optical properties were assessed with a UV-Vis spectrophotometer measuring wavelengths from 400 to 800 nm, and intrinsic defects were identified through photoluminescence spectroscopy (PL) at an excitation wavelength of 369 nm at room temperature.

Results

The results of the study on the thermal oxidation of copper plates reveal a systematic sequence of phase transitions influenced by annealing temperature and oxygen diffusion dynamics. The oxidation pathway progresses from metallic copper (Cu) to cuprous oxide (Cu2O) and finally to cupric oxide (CuO). At lower temperatures (approximately 150-250 °C), partial oxidation occurs, resulting in the formation of Cu2O, characterized by its cubic crystal structure. As the temperature increases to 250-350 °C, Cu+ ions in Cu2O are further oxidized to Cu2+, leading to the formation of monoclinic CuO through a diffusion-controlled mechanism. This transformation is quantitatively described by the equations:

\[
2Cu + \frac{1}{2}O_2 \rightarrow Cu_2O \quad (1)
\]
\[
Cu_2O + \frac{1}{2}O_2 \rightarrow 2CuO \quad (2)
\]

X-ray diffraction (XRD) analysis confirms the presence of these phases at various temperatures, with complete oxidation observed at 500 °C, where Cu peaks disappear and Cu2O and CuO phases dominate. The study also highlights the role of thermal stress and structural deformation in facilitating oxidation, as well as the significance of oxygen vacancies in phase transformations.

At higher temperatures (700 °C), the crystallinity of the CuO-Cu2O composite improves, although the presence of Cu2O contradicts previous findings that suggested CuO formation at lower temperatures. The findings indicate that diffusion-limited oxidation kinetics lead to a bilayer structure of CuO and Cu2O, with the potential for CuO to revert to Cu2O at elevated temperatures. The phase composition was further analyzed using the Rietveld method, underscoring the complex interplay between temperature, oxidation states, and structural changes during the oxidation process.

Discussion

In this study, the thermal oxidation of copper plates at varying temperatures (300 °C, 500 °C, and 700 °C) was investigated to understand the phase evolution, microstructural behavior, and optical properties of CuO-Cu2O hybrid materials. Crystallographic Information Files (CIFs) were sourced for the respective phases, revealing a temperature-driven oxidation trend characterized by the dominance of copper at 300 °C (98.88 wt%), transitioning to significant amounts of Cu2O (71.05 wt%) and CuO (28.95 wt%) at 500 °C, and a persistence of Cu2O at 700 °C (68.22 wt%). The findings indicate that thermal activation influences crystallinity, with lattice parameters initially decreasing due to oxidation-induced compressive stress, followed by expansion at higher temperatures due to thermal relaxation and increased oxygen content.

X-ray diffraction (XRD) analysis confirmed that the 700 °C sample exhibited the largest crystallite size and lowest microstrain, indicating enhanced structural order. Optical properties were assessed through UV-Vis spectroscopy, revealing a bandgap variation of 2.60 eV (300Cu), 2.69 eV (500Cu), and 2.55 eV (700Cu), attributed to phase hybridization and defect states. The 700Cu sample demonstrated improved optical transparency, characterized by the lowest optical density and highest skin depth, suggesting superior light penetration. Photoluminescence (PL) analysis indicated that defect-related emissions were prominent in lower temperature samples, while higher temperatures led to reduced non-radiative recombination, enhancing the emission intensity. Overall, the results underscore the significant impact of thermal conditions on the structural and optical properties of Cu-based oxides, providing insights for future optoelectronic applications.