DOI: https://doi.org/10.22214/ijraset.2026.76323
تاريخ النشر: 2026-01-05
المؤلف: Aadil Parwez
الموضوع الرئيسي: خصائص المواد وتطبيقاتها
نظرة عامة
تستكشف هذه الدراسة سلامة الهيكل والأداء لأجنحة الطائرات بدون طيار المصنوعة من البوليمر المقوى بألياف الكربون (CFRP) والبوليمر المقوى بألياف الزجاج (GFRP) باستخدام تحليل العناصر المحدودة (FEA) في ANSYS Workbench. تهدف الأبحاث إلى تقييم ومقارنة التشوه الكلي، والضغط الرئيسي الأقصى، والانفعال الرئيسي الأقصى لهذه المواد تحت الأحمال الهوائية. تم إنشاء نموذج جناح طائرة بدون طيار مدبب، مع معلمات هندسية محددة، في CATIA V5 وتم إخضاعه لمحاكاة هيكلية ثابتة. كشفت التحليلات أن CFRP أظهر صلابة متفوقة وانحرافًا أقل (0.0026 بوصة) مقارنةً بـ GFRP، الذي أظهر مرونة أكبر وتشوهًا كليًا أعلى (0.043 بوصة) تحت ظروف تحميل متطابقة.
تشير النتائج إلى أن CFRP أكثر ملاءمة للطائرات بدون طيار عالية الأداء والتحمل، بينما قد يكون GFRP مناسبًا للتطبيقات الحساسة من حيث التكلفة أو قصيرة المدى. تعزز هذه الأبحاث الفهم للمواد المركبة في تصميم الطائرات، مع تسليط الضوء على التوازن بين التكلفة والأداء وكفاءة الوزن. يمكن أن تمتد التحقيقات المستقبلية إلى التحليلات الديناميكية والتعب، واستكشاف المركبات الهجينة، وتضمين التحقق التجريبي لدعم هذه النتائج بشكل أكبر.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على الدور التحويلي للطائرات بدون طيار (UAVs) عبر مختلف الصناعات، مع التأكيد على الأهمية الحاسمة لتصميم الأجنحة من أجل الأداء الهوائي وسلامة الهيكل. مع تقدم UAVs نحو تحسين التحمل وقدرات الحمولة، زادت الحاجة إلى مواد خفيفة الوزن وعالية القوة. تم تحديد المواد المركبة، وخاصة البوليمر المقوى بألياف الكربون (CFRP) والبوليمر المقوى بألياف الزجاج (GFRP)، كمرشحين مثاليين لصنع الأجنحة بسبب خصائصها الميكانيكية المتفوقة وكثافتها المنخفضة. بينما يقدم CFRP صلابة وقوة استثنائية، مما يجعله مناسبًا للتطبيقات عالية الأداء، فإن تكلفته العالية تحد من استخدامه في المشاريع الحساسة من حيث الميزانية. من ناحية أخرى، يعد GFRP بديلاً فعالاً من حيث التكلفة للتطبيقات الأقل تطلبًا.
تقدم الورقة دراسة مقارنة تستخدم تحليل العناصر المحدودة (FEA) لتقييم الأداء الهيكلي لأجنحة CFRP وGFRP تحت ظروف تحميل ثابتة. يتم تحليل المعلمات الرئيسية مثل التشوه الكلي، والضغط المكافئ (فون ميسيس)، وتوزيع الانفعال لتقييم تأثير اختيار المادة على قدرات التحمل. كما تتناول الدراسة اعتبارات التصميم الحاسمة، بما في ذلك تركيز الضغط عند جذر الجناح، وتأثيرات التحميل الديناميكي، والتقوية الهوائية، التي تؤثر على أداء الجناح. بالإضافة إلى ذلك، تبرز الأبحاث أهمية طاقة الانفعال في تقييم قدرة امتصاص الطاقة لأجنحة الطائرات بدون طيار، مما يساهم في تقديم رؤى حول مقاومة التعب ومرونة الهيكل. في النهاية، تهدف النتائج إلى توجيه اختيار المواد لهياكل أجنحة UAV، مع تحقيق التوازن بين الأداء والتكلفة والمتانة والاستدامة في التصاميم المستقبلية.
الطرق
في هذا القسم، تتضمن منهجية البحث المستخدمة نهجًا شاملاً باستخدام CATIA للنمذجة وAnsys Workbench لإجراء تحليل العناصر المحدودة (FEA). تركز الدراسة على تحليل مواد البوليمر المقوى بألياف الزجاج (GFRP)، المعروفة بخصائصها الميكانيكية المفيدة وخصائصها الخفيفة الوزن.
تسمح عملية النمذجة في CATIA بإنشاء تمثيلات هندسية دقيقة لمكونات GFRP، والتي يتم إخضاعها بعد ذلك لـ FEA في Ansys Workbench. يمكّن هذا الإطار التحليلي من تقييم الضغط والانفعال والتشوه تحت ظروف تحميل مختلفة، مما يوفر رؤى حول الأداء والمتانة لمواد GFRP في التطبيقات العملية. إن دمج هذه المنهجيات أمر حيوي لفهم سلامة الهيكل والتطبيقات المحتملة لـ GFRP في السياقات الهندسية.
المناقشة
تسلط المناقشة الضوء على التحليل المقارن للبوليمر المقوى بألياف الكربون (CFRP) والبوليمر المقوى بألياف الزجاج (GFRP) في سياق أداء جناح الطائرة بدون طيار، مع التأكيد على الخصائص الميكانيكية المتفوقة لـ CFRP. استخدمت الأبحاث منهجية محاكاة حسابية، تتضمن CAD وتحليل العناصر المحدودة (FEA) لنمذجة وتحليل جناح طائرة بدون طيار مدبب تحت ظروف تحميل ثابتة. أشارت النتائج إلى أن CFRP أظهر تشوهًا كليًا أقل بكثير (0.0026 بوصة) مقارنةً بـ GFRP (0.043 بوصة)، مما يدل على صلابة محسّنة ومقاومة للانحراف، وهو أمر حاسم للحفاظ على الاستقرار الهندسي أثناء التشغيل.
كشفت التحليلات الإضافية أن CFRP كان لديه انفعال مرن ضئيل قدره \(6.20 \times 10^{-7}\)، مما يشير إلى توزيع موحد للانفعال وانخفاض خطر تكوين الشقوق الدقيقة، بينما أظهر GFRP انفعالًا أعلى بكثير قدره \(1.02 \times 10^{5}\)، مما يدل على تركيزات ضغط محلية محتملة قد تؤدي إلى تلف التعب. على الرغم من أن قيم الضغط الرئيسي الأقصى لكلا المادتين كانت ضمن حدود التشغيل الآمنة، فإن الضغط المنخفض لـ CFRP وتوزيع الانفعال الأفضل يساهمان في متانته وموثوقيته العامة. تدعو النتائج إلى استخدام CFRP في تطبيقات الطائرات بدون طيار عالية الأداء، حيث يضمن تحسين استقرار الطيران، وتقليل خطر الفشل الهيكلي، وكفاءة الطاقة المثلى، على الرغم من فعالية GFRP من حيث التكلفة.
DOI: https://doi.org/10.22214/ijraset.2026.76323
Publication Date: 2026-01-05
Author(s): Aadil Parwez
Primary Topic: Material Properties and Applications
Overview
This study investigates the structural integrity and performance of drone wings made from Carbon Fiber Reinforced Polymer (CFRP) and Glass Fiber Reinforced Polymer (GFRP) using finite element analysis (FEA) in ANSYS Workbench. The research aims to evaluate and compare the total deformation, maximum principal stress, and maximum principal strain of these materials under aerodynamic loads. A tapered drone wing model, with specific geometric parameters, was created in CATIA V5 and subjected to static structural simulations. The analysis revealed that CFRP demonstrated superior stiffness and lower deflection (0.0026 inches) compared to GFRP, which exhibited greater flexibility and a higher total deformation (0.043 inches) under identical loading conditions.
The findings indicate that CFRP is more suitable for high-performance and endurance drones, while GFRP may be appropriate for cost-sensitive or short-range applications. This research enhances the understanding of composite materials in aerospace design, highlighting the trade-offs between cost, performance, and weight efficiency. Future investigations could extend to dynamic and fatigue analyses, explore hybrid composites, and include experimental validation to further substantiate these results.
Introduction
The introduction of this research paper highlights the transformative role of Unmanned Aerial Vehicles (UAVs) across various industries, emphasizing the critical importance of wing design for aerodynamic performance and structural integrity. As UAVs advance towards enhanced endurance and payload capabilities, the demand for lightweight, high-strength materials has intensified. Composite materials, particularly Carbon Fiber Reinforced Polymer (CFRP) and Glass Fiber Reinforced Polymer (GFRP), are identified as optimal candidates for wing fabrication due to their superior mechanical properties and low density. While CFRP offers exceptional stiffness and strength, making it suitable for high-performance applications, its high cost limits its use in budget-sensitive projects. Conversely, GFRP serves as a cost-effective alternative for less demanding applications.
The paper presents a comparative study utilizing Finite Element Analysis (FEA) to evaluate the structural performance of CFRP and GFRP wings under static loading conditions. Key parameters such as total deformation, equivalent (von Mises) stress, and strain distribution are analyzed to assess the impact of material choice on load-bearing capabilities. The study also addresses critical design considerations, including stress concentration at the wing root, dynamic loading effects, and aeroelastic stiffening, which influence wing performance. Additionally, the research underscores the significance of strain energy in evaluating the energy absorption capacity of drone wings, contributing to insights on fatigue resistance and structural resilience. Ultimately, the findings aim to guide material selection for UAV wing structures, balancing performance, cost, durability, and sustainability in future designs.
Methods
In this section, the research methodology employed involves a comprehensive approach utilizing CATIA for modeling and Ansys Workbench for conducting Finite Element Analysis (FEA). The study focuses on the analysis of Glass Fiber Reinforced Polymer (GFRP) materials, which are known for their advantageous mechanical properties and lightweight characteristics.
The modeling process in CATIA allows for the creation of precise geometrical representations of the GFRP components, which are then subjected to FEA in Ansys Workbench. This analytical framework enables the evaluation of stress, strain, and deformation under various loading conditions, thereby providing insights into the performance and durability of GFRP materials in practical applications. The integration of these methodologies is crucial for understanding the structural integrity and potential applications of GFRP in engineering contexts.
Discussion
The discussion highlights the comparative analysis of Carbon Fiber Reinforced Polymer (CFRP) and Glass Fiber Reinforced Polymer (GFRP) in the context of drone wing performance, emphasizing the superior mechanical properties of CFRP. The research utilized a computational simulation methodology, incorporating CAD and finite element analysis (FEA) to model and analyze a tapered drone wing under static loading conditions. The results indicated that CFRP exhibited significantly lower total deformation (0.0026 inch) compared to GFRP (0.043 inch), demonstrating enhanced stiffness and resistance to deflection, which is critical for maintaining geometric stability during operation.
Further analysis revealed that CFRP had a minimal elastic strain of \(6.20 \times 10^{-7}\), suggesting a uniform strain distribution and reduced risk of micro-crack formation, while GFRP showed a much higher strain of \(1.02 \times 10^{5}\), indicating potential localized stress concentrations that could lead to fatigue damage. Although the maximum principal stress values for both materials were within safe operating limits, CFRP’s lower stress and better strain distribution contribute to its overall durability and reliability. The findings advocate for the use of CFRP in high-performance drone applications, as it ensures improved flight stability, reduced risk of structural failure, and optimal energy efficiency, despite GFRP’s cost-effectiveness.
