DOI: https://doi.org/10.1039/d3cs01105d
PMID: https://pubmed.ncbi.nlm.nih.gov/38426588
تاريخ النشر: 2024-01-01
المؤلف: Celia Castillo‐Blas وآخرون
الموضوع الرئيسي: الأطر العضوية المعدنية: التركيب والتطبيقات
نظرة عامة
تؤكد هذه المراجعة على أهمية فهم المعرفة الهيكلية للأطر المعدنية العضوية (MOFs) لتطوير مواد فعالة في التطبيقات الصناعية. تصنف الأدبيات الحديثة حول التحولات الطورية المنشطة حرارياً في MOFs، مميزة بين التحولات ذات درجات الحرارة العالية (القابلة للعكس وغير القابلة للعكس) والتحولات ذات درجات الحرارة المنخفضة. تناقش المراجعة أيضًا الحسابات النظرية وطرق النمذجة التي تعزز الفهم لهذه التغيرات الهيكلية.
تشير النتائج الرئيسية إلى أن عمليات متعددة منشطة حرارياً يمكن أن تحدث عند التسخين، حيث ترتبط العمليات غير القابلة للعكس غالبًا بتفكك الروابط. يعد التحكم في الظروف الحرارية والبيئية أمرًا أساسيًا لتحقيق الهياكل النانوية المستمدة من MOF المرغوبة، والتي تكون ذات قيمة في التطبيقات الكهروكيميائية والتحفيزية. تبرز المراجعة الإمكانية لحدوث انصهار في MOFs وتشكيل زجاجات متجمدة بالانصهار، والتي تظهر خصائص ميكانيكية وبصرية واعدة. بالإضافة إلى ذلك، تشير إلى أهمية التحولات الطورية الهيكلية القابلة للعكس، وخاصة تلك المتعلقة بفقدان المذيب، والاهتمام المتزايد بالتحولات ذات درجات الحرارة المنخفضة التي قد تؤثر على امتصاص الغاز وخصائص المغناطيسية. تؤكد المراجعة على ضرورة استخدام تقنيات توصيف متنوعة، مثل التحليل الحراري وطرق التحليل بالأشعة السينية، لمراقبة وفهم هذه التحولات الطورية بدقة، مما يربط في النهاية التغيرات الهيكلية بالخصائص الفيزيائية والكيميائية لـ MOFs.
مقدمة
في مقدمة الورقة، يناقش المؤلفون الأطر المعدنية العضوية (MOFs)، وهي فئة من المواد الهجينة التي حظيت باهتمام كبير في علم المواد على مدى الثلاثين عامًا الماضية بسبب تنوعها وخصائصها الفريدة. يتم بناء MOFs من التجميع الذاتي للعناقيد غير العضوية، المعروفة بوحدات البناء الثانوية (SBUs)، والروابط العضوية، مما يؤدي إلى شبكات مسامية ذات طوبولوجيات متنوعة. تمكن مساميتها الاستثنائية مجموعة واسعة من التطبيقات، بما في ذلك تخزين الغاز، وتوصيل الأدوية، والتحفيز غير المتجانس، والاستشعار. يعد فهم العلاقة بين الهيكل والخصائص لـ MOFs أمرًا أساسيًا لتطوير مواد جديدة لهذه التطبيقات.
يبرز المؤلفون أن التحولات الطورية الهيكلية في MOFs يمكن أن تُحفز بواسطة محفزات متنوعة، وخاصة درجة الحرارة، التي تعتبر حاسمة للتحولات في الحالة الصلبة. على الرغم من الأدبيات الواسعة حول MOFs، هناك نقص مفاجئ في الدراسات التي تركز على التحولات الناتجة عن درجة الحرارة، حيث ركزت معظم الأبحاث على الاستقرار الحراري عند درجات حرارة عالية. تهدف المراجعة إلى معالجة هذه الفجوة من خلال دراسة التحولات الطورية الهيكلية المنشطة حرارياً في MOFs، وتصنيفها بناءً على استجابتها للعلاج الحراري، وتفصيل تقنيات التوصيف والنهج النظرية المستخدمة لتحليل هذه التحولات. ستستكشف الأقسام التالية بشكل خاص التحولات الطورية غير القابلة للعكس الناتجة عن التسخين، بما في ذلك تفكك الروابط والتغيرات الشكلية.
مناقشة
في قسم المناقشة من الورقة البحثية، يبرز المؤلفون المساهمات الكبيرة للبروفيسورين ديفيد أ. كين وتوماس د. بينيت في مجال علم المواد، وخاصة في دراسة الأطر المعدنية العضوية (MOFs) وتحولاتها الهيكلية. يستعرض القسم أنواعًا مختلفة من التحولات الطورية الهيكلية القابلة للعكس وغير القابلة للعكس في MOFs، مؤكدًا على أهمية درجة الحرارة والظروف البيئية أثناء العلاجات الحرارية. تُلاحظ تقنيات مثل التحليل الحراري الوزني (TGA) لتقييم الاستقرار الحراري، بينما تتطلب طرق أخرى توضيح التغيرات الهيكلية التي تحدث أثناء عمليات التسخين والتبريد.
يُفصل المؤلفون تخليق المواد المستمدة من MOF، بما في ذلك الكربونات النانوية وأكاسيد المعادن، من خلال عمليات حرارية محكومة. يتم مناقشة الكربنة لـ MOFs كعملية معقدة يمكن أن تنتج مواد ذات مساحات سطحية عالية، مناسبة للتطبيقات في التحفيز وتخزين الطاقة. بالإضافة إلى ذلك، يتم تناول تشكيل مركبات المعادن/أكاسيد المعادن والتحديات المرتبطة بالتحكم في حجم الجسيمات أثناء التخليق. يختتم القسم باستكشاف سلوكيات الانصهار والتزجاج لـ MOFs، مقترحًا أن هذه الظواهر قد تؤدي إلى تطبيقات جديدة في معالجة المواد وتطوير MOFs زجاجية للاستخدامات الصناعية المختلفة.
DOI: https://doi.org/10.1039/d3cs01105d
PMID: https://pubmed.ncbi.nlm.nih.gov/38426588
Publication Date: 2024-01-01
Author(s): Celia Castillo‐Blas et al.
Primary Topic: Metal-Organic Frameworks: Synthesis and Applications
Overview
This review emphasizes the importance of understanding the structural knowledge of metal-organic frameworks (MOFs) for the development of efficient materials in industrial applications. It categorizes recent literature on thermally activated phase transitions in MOFs, distinguishing between high-temperature (both reversible and non-reversible) and low-temperature transitions. The review also discusses theoretical calculations and modeling approaches that enhance comprehension of these structural changes.
Key findings indicate that multiple thermally activated processes can occur upon heating, with non-reversible processes often linked to the decomposition of linkers. The control of thermal and atmospheric conditions is essential for achieving desired MOF-derived nanostructures, which are valuable in electrochemical and catalytic applications. The review highlights the potential for MOFs to undergo melting and form melt-quenched glasses, which exhibit promising mechanical and optical properties. Additionally, it notes the significance of reversible structural phase transitions, particularly those related to solvent loss, and the emerging interest in low-temperature transitions that could influence gas sorption and magnetic properties. The review underscores the necessity of employing various characterization techniques, such as thermal analysis and diffractometric methods, to accurately monitor and understand these phase transitions, ultimately linking structural variations to the physical and chemical properties of MOFs.
Introduction
In the introduction of the paper, the authors discuss metal-organic frameworks (MOFs), a class of hybrid materials that have garnered significant attention in materials science over the past thirty years due to their versatility and unique properties. MOFs are constructed from the self-assembly of inorganic clusters, known as secondary building units (SBUs), and organic linkers, resulting in porous networks with diverse topologies. Their exceptional porosity enables a wide range of applications, including gas storage, drug delivery, heterogeneous catalysis, and sensing. Understanding the structure-property relationship of MOFs is essential for developing new materials for these applications.
The authors highlight that structural phase transitions in MOFs can be induced by various stimuli, particularly temperature, which is crucial for solid-state transformations. Despite extensive literature on MOFs, there is a surprising lack of studies focusing on temperature-induced transformations, as most research has concentrated on thermal stability at high temperatures. The review aims to address this gap by examining thermally activated structural phase transitions in MOFs, categorizing them based on their response to thermal treatment, and detailing the characterization techniques and theoretical approaches used to analyze these transitions. The subsequent sections will specifically explore non-reversible phase transitions resulting from heating, including linker decomposition and conformational changes.
Discussion
In the discussion section of the research paper, the authors highlight the significant contributions of Professors David A. Keen and Thomas D. Bennett to the field of materials science, particularly in the study of metal-organic frameworks (MOFs) and their structural transformations. The section reviews various reversible and non-reversible structural phase transitions in MOFs, emphasizing the importance of temperature and environmental conditions during thermal treatments. Techniques such as thermal gravimetric analysis (TGA) are noted for assessing thermal stability, while other methods are required to elucidate the structural changes that occur during heating and cooling processes.
The authors detail the synthesis of MOF-derived materials, including nanoporous carbons and metal oxides, through controlled thermal processes. The carbonization of MOFs is discussed as a complex reaction that can yield materials with high surface areas, suitable for applications in catalysis and energy storage. Additionally, the formation of metal/metal oxide composites and the challenges associated with controlling particle size during synthesis are addressed. The section concludes by exploring the melting and vitrification behaviors of MOFs, suggesting that these phenomena could lead to new applications in material processing and the development of glassy MOFs for various industrial uses.
