التخليق المستدام وقياس امتصاص CO2 في MOF قائم على Zn-Triazole ومركب PVDF القابل للمعالجة Sustainable Synthesis and Benchmark CO 2 Uptake in a Zn-Triazole-Based MOF and Its Processable PVDF Composite

شارك:
المجلة: Chemistry of Materials، المجلد: 38، العدد: 8
DOI: https://doi.org/10.1021/acs.chemmater.5c03237
تاريخ النشر: 2026-04-11
المؤلف: Zhenyun Du وآخرون
الموضوع الرئيسي: الأطر العضوية المعدنية: التركيب والتطبيقات

نظرة عامة

تقدم البحث بروتوكولًا اصطناعيًا جديدًا لإنتاج الأطر المعدنية العضوية ذات الطبقات المدعومة (MOFs) باستخدام روابط الترايازولات والأوكزالات أو الروابط العضوية ثنائية الكربوكسيل، بهدف تعزيز كفاءة التقاط CO₂ للتطبيقات على نطاق واسع. تدمج هذه الطريقة الكيمياء الميكانيكية المدعومة بالسوائل مع الحد الأدنى من استخدام المذيبات، مما يقلل من الأثر البيئي مع تحسين القابلية للتوسع. يظهر Zn-MOF الناتج من الترايازولات والفومارات خصائص استثنائية، بما في ذلك أعلى مساحة سطح وأعلى قدرة على امتصاص CO₂ في فئته، مع انتقائية تبلغ 200 لـ CO₂ على N₂ عند 273 كلفن. تم قياس حرارة الامتصاص عند 36 كيلوجول/مول، وأظهر المادة استقرارًا ملحوظًا في الدورات عبر 100 دورة امتصاص/إزالة.

تضمنت تقنيات التوصيف المتعمقة، بما في ذلك حيود الأشعة السينية البودرة (PXRD) في الموقع والدراسات الحاسوبية، تحديد مواقع امتصاص CO₂ المفضلة داخل الإطار، مما يبرز الترتيب الديناميكي للأعمدة والطبقات. أكدت تجارب الاختراق على امتصاص CO₂ الانتقائي حتى في الظروف الرطبة، مع تجديد كامل لأداء الامتصاص للمادة المركبة من خلال احتضان المذيب. لا تسهل هذه الطريقة المستدامة في التخليق إنشاء MOFs عالية البلورة فحسب، بل تسمح أيضًا بإنتاج مركبات MOF-polymer ذات شكل متحكم فيه، مما يمهد الطريق للتطبيقات على نطاق صناعي في التقاط CO₂.

مقدمة

تتناول مقدمة ورقة البحث القضية الملحة للاحتباس الحراري العالمي، مع التأكيد على دور انبعاثات ثاني أكسيد الكربون (CO₂) من احتراق الوقود الأحفوري كمساهم رئيسي. تواجه تقنيات التقاط CO₂ الحالية، وخاصة عمليات غسل الأمين المائية، تحديات مثل متطلبات الطاقة العالية للتجديد وإدارة النفايات. كبديل واعد، يتم استكشاف الممتصات الصلبة، وخاصة الأطر المعدنية العضوية (MOFs)، لقدرتها على التقاط CO₂ بشكل انتقائي من الانبعاثات الصناعية. يتم تسليط الضوء على MOFs لخصائصها المفيدة، بما في ذلك المساحات السطحية الكبيرة، وأحجام المسام القابلة للتعديل، والمرونة الكيميائية.

تناقش الورقة بشكل خاص CALF-20، وهو MOF تم تطويره بواسطة مجموعة G. Shimizu، والذي أظهر فعالية في التقاط CO₂ حتى في الظروف الرطبة، مع جهود مستمرة للتطبيق الصناعي. يقدم البحث Zn-MOF جديد ذو طبقات مدعومة، يسمى Zn-TRF، تم تصنيعه باستخدام طريقة الطحن المدعوم بالسوائل واحتضان المذيب (LAG-IN)، والتي تُلاحظ لاستدامتها بسبب تقليل استخدام المذيبات. يظهر Zn-TRF قدرة امتصاص CO₂ ملحوظة تبلغ 4.8 مليمول/غرام عند 298 كلفن و1 بار، مع انتقائية CO₂/N₂ تبلغ 200 عند تغطية منخفضة، ويظهر قابلية ممتازة للدورات عبر 100 دورة. يستخدم البحث نهجًا تآزريًا باستخدام تقنيات توصيف متنوعة للتحقيق في هيكل الإطار ومواقع ارتباط CO₂، مما يبرز إمكانيات هذا MOF لتطبيقات التقاط CO₂ على نطاق واسع.

طرق

شملت الطرق التجريبية المستخدمة في هذه الدراسة مجموعة شاملة من التقنيات التحليلية لتوصيف المواد وخصائصها. تم تسجيل طيف NMR الحل باستخدام مقياس طيف Bruker Avance Neo عند 400 ميغاهيرتز و25 درجة مئوية، بينما تم إجراء التحليل الحراري الوزني (TGA) على نظام Mettler Toledo Star عبر نطاق درجة حرارة من 30-1000 درجة مئوية بمعدل تسخين 10 درجات مئوية/دقيقة في الهواء. تم إجراء مطيافية الأشعة تحت الحمراء بتحويل فورييه (FT-IR) باستخدام Thermo Scientific Nicolet iS20، وتم الحصول على صور المجهر الإلكتروني الماسح (SEM) باستخدام Zeiss Gemini 500. تم جمع أنماط حيود الأشعة السينية البودرة (PXRD) على Rigaku SmartLab، بما في ذلك التنشيط في الموقع والقياسات تحت ظروف فراغ ديناميكي وCO₂.

تضمنت التوصيفات الإضافية جمع بيانات PXRD من السنكروترون في المنشأة الأوروبية للإشعاع السنكروتروني (ESRF) وتحسينات ريتفيلد باستخدام برنامج TOPAS-Academic64. تم تنفيذ حسابات نظرية الكثافة الوظيفية (DFT) باستخدام كود CASTEP. تم إجراء تجارب NMR الحالة الصلبة للكربون والهيدروجين والنيتروجين تحت دوران الزاوية السحرية (MAS) على مقاييس Bruker. تم قياس إيزوثرمات الامتصاص لـ N₂ وCO₂ وH₂O باستخدام أجهزة Micromeritics، وتم تقييم المساحة السطحية والمسامية من خلال طرق متنوعة بما في ذلك تحليلات BET وLangmuir. بالإضافة إلى ذلك، تم إجراء قياسات ميكروكالوريمترية لامتصاص CO₂ باستخدام Micromeritics ASAP 2050، وتم إجراء تجارب الاختراق لتقييم أداء فصل الغاز باستخدام نظام Micromeritics SAA المدمج مع مطياف الكتلة.

نتائج

تتناول قسم النتائج تخليق وتوصيف الإطار المعدني العضوي (MOF) Zn-TRF، الذي تم تحقيقه من خلال طريقة كيميائية ميكانيكية مدعومة بالسوائل تليها احتضان الميثانول. أسفر هذا العملية عن عائد مرتفع بلغ 78% وأسفر عن إطار عالي المسامية بعد التنشيط تحت الفراغ. أكدت تقنيات التوصيف، بما في ذلك FT-IR وNMR والتحليل الحراري الوزني، التنسيق الناجح للرابطة مع أيونات Zn²⁺ وأظهرت استقرار المادة الحراري الذي يتجاوز 250 درجة مئوية. كشفت التحليلات الهيكلية عن وجود طورين بلوريين متميزين مع توبولوجيات مسامية مختلفة، تتميز بأحجام ومسارات مسام متباينة، مما يساهم في مساحة السطح العالية للمادة (995 م²/غ) وقدرة امتصاص CO₂ الاستثنائية (4.79 مليمول/غ عند 298 كلفن).

أظهر Zn-TRF انتقائية ملحوظة لـ CO₂ على N₂، مع انتقائيات تصل إلى 200 عند تغطية منخفضة و104 عند درجة حرارة الغرفة. حافظت المادة على أدائها عبر 100 دورة امتصاص/إزالة، مع إظهار انخفاض قدره 0.5% فقط في قدرة امتصاص CO₂، مما يدل على استقرار ممتاز في الدورات. تم تأكيد التغيرات الهيكلية عند امتصاص CO₂ عبر حيود الأشعة السينية البودرة في الموقع، مما يكشف عن إعادة ترتيب ناتجة عن CO₂ ظلت مستقرة لفترات طويلة. بالإضافة إلى ذلك، أظهرت مادة مركبة، Zn-TRF@PVDF، قدرة امتصاص CO₂ محسنة مقارنة بـ MOF النقي، مما يبرز الإمكانيات للتطبيقات العملية في فصل الغاز، خاصة في الظروف الرطبة، حيث احتفظت المادة بأدائها بعد التجديد.

مناقشة

يقدم البحث بروتوكولًا اصطناعيًا لتحضير إطار معدني عضوي (MOF) قائم على الزنك مع خصائص محسنة. يتضمن التخليق عملية طحن مدعومة بالسوائل من خطوتين تليها معالجة حرارية، مما ينتج مادة عالية البلورة مع مساحة سطح متفوقة وقدرة امتصاص CO₂. تسهل الطريقة أيضًا التكوين في الموقع لـ MOF داخل مصفوفة بولي (فلوريد الفينيليدين) (PVDF)، مما يؤدي إلى مركب يحتفظ بأداء امتصاص الغاز مع السماح بضغط كائنات قائمة ذات شكل متحكم فيه.

تشمل النتائج الرئيسية امتصاص CO₂ الانتقائي على N₂، حتى في الظروف الرطبة، والتجديد الكامل للمادة من خلال احتضان المذيب. حددت حيود الأشعة السينية البودرة في الموقع (PXRD) وحسابات نظرية الكثافة الوظيفية (DFT) مواقع الامتصاص الرئيسية التي تتميز بتفاعلات متعددة C-H•••O بين CO₂ والترايازولات. يبرز استهلاك المذيبات المعتدل المرتبط بهذه الطريقة في التخليق إمكانياتها في الكيمياء المستدامة، مما يمهد الطريق للإنتاج على نطاق صناعي لمواد تمتص CO₂ ومركباتها.

Journal: Chemistry of Materials, Volume: 38, Issue: 8
DOI: https://doi.org/10.1021/acs.chemmater.5c03237
Publication Date: 2026-04-11
Author(s): Zhenyun Du et al.
Primary Topic: Metal-Organic Frameworks: Synthesis and Applications

Overview

The research presents a novel synthetic protocol for producing pillared-layer metal-organic frameworks (MOFs) using triazolate and oxalate or organodicarboxylate linkers, aimed at enhancing CO₂ capture efficiency for large-scale applications. This method integrates liquid-assisted mechanochemistry with minimal solvent use, thereby reducing environmental impact while improving scalability. The resulting triazolate-fumarate Zn-MOF demonstrates exceptional properties, including the highest surface area and CO₂ adsorption capacity in its class, with a selectivity of 200 for CO₂ over N₂ at 273 K. The heat of adsorption was measured at 36 kJ/mol, and the material exhibited remarkable cycling stability across 100 adsorption/desorption cycles.

In-depth characterization techniques, including in situ powder X-ray diffraction (PXRD) and computational studies, identified preferred CO₂ adsorption sites within the framework, highlighting the dynamic arrangement of pillars and layers. Breakthrough experiments confirmed selective CO₂ adsorption even in humid conditions, with the composite material fully regenerating its sorption performance through solvent incubation. This sustainable synthesis approach not only facilitates the creation of highly crystalline MOFs but also allows for the production of MOF-polymer composites with controlled morphology, paving the way for industrial-scale applications in CO₂ capture.

Introduction

The introduction of the research paper addresses the pressing issue of global warming, emphasizing the role of carbon dioxide (CO₂) emissions from fossil fuel combustion as a significant contributor. Current CO₂ capture technologies, particularly aqueous amine scrubbing processes, face challenges such as high energy requirements for regeneration and waste management. As a promising alternative, solid absorbents, particularly metal-organic frameworks (MOFs), are being explored for their ability to selectively capture CO₂ from industrial emissions. MOFs are highlighted for their advantageous properties, including large surface areas, tunable pore sizes, and chemical versatility.

The paper specifically discusses CALF-20, a MOF developed by G. Shimizu’s group, which has shown effectiveness in capturing CO₂ even in humid conditions, with ongoing efforts for industrial application. The study presents a novel pillared-layer Zn-MOF, designated Zn-TRF, synthesized using a liquid-assisted grinding and solvent incubation (LAG-IN) method, which is noted for its sustainability due to reduced solvent use. Zn-TRF demonstrates a remarkable CO₂ uptake capacity of 4.8 mmol/g at 298 K and 1 bar, with a CO₂/N₂ selectivity of 200 at low coverage, and exhibits excellent cyclability over 100 cycles. The research employs a synergistic approach utilizing various characterization techniques to investigate the framework structure and CO₂ binding sites, underscoring the potential of this MOF for large-scale CO₂ capture applications.

Methods

The experimental methods employed in this study involved a comprehensive suite of analytical techniques to characterize the materials and their properties. Solution NMR spectra were recorded using a Bruker Avance Neo spectrometer at 400 MHz and 25 °C, while thermogravimetric analysis (TGA) was conducted on a Mettler Toledo Star System across a temperature range of 30-1000 °C at a heating rate of 10 °C/min in air. Fourier-transform infrared (FT-IR) spectroscopy was performed with a Thermo Scientific Nicolet iS20, and scanning electron microscopy (SEM) images were obtained using a Zeiss Gemini 500. Powder X-ray diffraction (PXRD) patterns were collected on a Rigaku SmartLab, including in situ activation and measurements under dynamic vacuum and CO₂ conditions.

Further characterization included synchrotron PXRD data collection at the European Synchrotron Radiation Facility (ESRF) and Rietveld refinements using TOPAS-Academic64 software. Density functional theory (DFT) calculations were executed with the CASTEP code. Solid-state NMR experiments for carbon, hydrogen, and nitrogen were performed under magic angle spinning (MAS) on Bruker spectrometers. Adsorption isotherms for N₂, CO₂, and H₂O were measured using Micromeritics instruments, and surface area and porosity were assessed through various methods including BET and Langmuir analyses. Additionally, CO₂ adsorption microcalorimetry was carried out with a Micromeritics ASAP 2050, and breakthrough experiments were conducted to evaluate gas separation performance using a Micromeritics SAA system coupled with a mass spectrometer.

Results

The results section details the synthesis and characterization of the metal-organic framework (MOF) Zn-TRF, achieved through a liquid-assisted mechanochemical method followed by methanol incubation. The process yielded a high yield of 78% and resulted in a highly porous framework after activation under vacuum. Characterization techniques, including FT-IR, NMR, and thermogravimetric analysis, confirmed the successful coordination of ligands to Zn²⁺ ions and demonstrated the material’s thermal stability exceeding 250 °C. The structural analysis revealed two distinct crystalline phases with different pore topologies, characterized by varying pore sizes and arrangements, contributing to the material’s high surface area (995 m²/g) and exceptional CO₂ adsorption capacity (4.79 mmol/g at 298 K).

Zn-TRF exhibited remarkable selectivity for CO₂ over N₂, with selectivities reaching 200 at low coverage and 104 at room temperature. The material maintained its performance over 100 adsorption/desorption cycles, showing only a 0.5% reduction in CO₂ uptake capacity, indicating excellent cycling stability. Structural changes upon CO₂ adsorption were confirmed via in situ powder X-ray diffraction, revealing a CO₂-induced rearrangement that remained stable for extended periods. Additionally, a composite material, Zn-TRF@PVDF, demonstrated enhanced CO₂ uptake compared to the pure MOF, showcasing the potential for practical applications in gas separation, particularly under humid conditions, where the material retained its performance after regeneration.

Discussion

The research presents a synthetic protocol for the preparation of a zinc-based triazolate-organodicarboxylate metal-organic framework (MOF) with enhanced properties. The synthesis involves a two-step liquid-assisted grinding process followed by thermal treatment, yielding a highly crystalline material with superior surface area and CO₂ adsorption capacity. The method also facilitates the in situ formation of the MOF within a poly(vinylidene fluoride) (PVDF) matrix, resulting in a composite that maintains gas adsorption performance while allowing for the extrusion of self-standing objects with controlled morphology.

Key findings include the selective uptake of CO₂ over N₂, even under humid conditions, and the complete regeneration of the material through solvent incubation. In situ powder X-ray diffraction (PXRD) and density functional theory (DFT) calculations identified primary sorption sites characterized by multiple C-H•••O interactions between CO₂ and triazolates. The moderate solvent consumption associated with this synthesis method underscores its potential for sustainable chemistry, paving the way for industrial-scale production of CO₂-adsorbing materials and their composites.