DOI: https://doi.org/10.11613/bm.2026.020708
PMID: https://pubmed.ncbi.nlm.nih.gov/42299352
تاريخ النشر: 2026-06-11
المؤلف: Soycan Tüner وآخرون
الموضوع الرئيسي: ممارسات المختبرات السريرية ومراقبة الجودة
نظرة عامة
تدرس الدراسة التداخل المتبادل بين التحلل الدموي، اليرقان، والدهون في الدم (HIL)، وهي عوامل قبل تحليلية شائعة يمكن أن تؤثر على نتائج المختبر. بينما ركزت الأبحاث السابقة على التأثيرات الفردية لهذه المؤشرات، لم يتم فحص تفاعلاتها بشكل شامل. باستخدام عينات مأخوذة من المرضى والالتزام بإرشادات CLSI-EP07، أعد الباحثون تجمعات عالية التركيز من اليرقان، الدهون في الدم، والتحلل الدموي، والتي تم تخفيفها بعد ذلك بمصل منخفض المؤشر لإنشاء تركيبات محددة. تم استخدام نظام Abbott Alinity c لقياس المؤشرات، وتم قياس التداخلات المتبادلة كنسب انحرافات بالنسبة للقيم الأساسية.
كشفت النتائج أن مستويات التحلل الدموي العالية لم تتفاعل بشكل كبير مع المؤشرات الأخرى؛ ومع ذلك، أدت مستويات التحلل الدموي بين 2.5-10.0 جرام/لتر إلى زيادة زائفة بنسبة 20-150% في الدهون في الدم وانخفاض زائف بنسبة 10-60% في اليرقان. على العكس، تسببت مستويات الدهون في الدم من 25-100 مؤشر في زيادة زائفة بنسبة 20-150% في اليرقان وانخفاض بنسبة 10-30% في مستويات التحلل الدموي المنخفضة. بالإضافة إلى ذلك، أدت مستويات اليرقان التي تتراوح من 42.75-171 ميكرومول/لتر إلى انخفاض زائف بنسبة 15-45% في مستويات التحلل الدموي المنخفضة. خلصت الدراسة إلى أن تقييم مؤشرات HIL بشكل مستقل يمكن أن يؤدي إلى تفسيرات خاطئة بسبب هذه التداخلات المتبادلة. لمعالجة هذه المشكلة، يقترح المؤلفون خوارزمية تعتمد على القواعد والعتبات تأخذ في الاعتبار هذه التفاعلات لتحسين تقييم جودة العينات وموثوقية المختبر.
مقدمة
تسلط المقدمة الضوء على التحديات الكبيرة قبل التحليل التي تطرحها التحلل الدموي، اليرقان، والدهون في الدم (HIL)، والتي يمكن أن تؤثر على دقة اختبارات المختبر الروتينية وتؤدي إلى تفسيرات خاطئة للنتائج. تقليديًا، كانت هذه القضايا تُقيّم بصريًا، وهي طريقة تم انتقادها بسبب ذاتيتها وافتقارها إلى التوحيد القياسي. تدعو إرشادات المعهد الوطني للمعايير السريرية والمخبرية (CLSI) C56A إلى تنفيذ نظام كشف لمؤشرات مصل HIL لتعزيز تقييم جودة العينات. من الجدير بالذكر أن التحلل الدموي في المختبر يُعتبر الخطأ الأكثر شيوعًا، حيث يؤثر على ما يصل إلى 3.3% من عينات الدم ويشكل 40-70% من العينات غير المناسبة.
تناقش النصوص أيضًا عدم كفاية بروتوكولات رفض الاختبارات الحالية، التي غالبًا ما تعتمد على قيم قطع من الشركات المصنعة للمواد الكيميائية التي لا تعالج التداخل المتبادل بين معلمات HIL. أشارت الدراسات السابقة إلى تفاعلات بين التحلل الدموي واليرقان، بالإضافة إلى تأثير الدهون في الدم على التحلل الدموي؛ ومع ذلك، لا تزال التقييمات الشاملة للاعتماد المتبادل بين المعلمات الثلاثة مفقودة. تهدف هذه الدراسة إلى التحقيق في التداخل المتبادل لمعايير HIL باستخدام عينات مرضى داخلية في ظروف سريرية ذات صلة وتطوير خوارزمية قرار لتعزيز تقييم جودة العينات.
الطرق
في هذه الدراسة التجريبية لتحليل التداخل، التي أجريت وفقًا لإرشادات CLSI EP07، هدف الباحثون إلى تقييم تأثيرات التحلل الدموي، اليرقان، والدهون في الدم على مادة تحليل مستهدفة. استخدمت الدراسة نهجًا معدلاً للتحقيق في التفاعلات المتبادلة بين هذه المواد المتداخلة، حيث يمكن أن تؤثر وجودها على النتائج المقاسة. على وجه التحديد، قام الباحثون بإجراء تخفيفات متسلسلة للمواد المتداخلة وحساب استعادتها لتحديد القيم المستهدفة للمقارنة.
تم إجراء التحليلات باستخدام نظام Abbott Alinity c (مختبرات أبوت، شيكاغو، الولايات المتحدة الأمريكية)، مما يضمن عملية قياس موحدة. حصلت الدراسة على موافقة أخلاقية من لجنة الأخلاقيات للدراسات غير التدخلية بجامعة أوساك (778-778-20)، مما يبرز الالتزام بممارسات البحث الأخلاقية. يسمح هذا الإطار المنهجي بفهم شامل لكيفية تأثير هذه التداخلات الشائعة على نتائج المختبر، مما يساهم في تقديم رؤى قيمة للتشخيصات السريرية.
النتائج
تشير النتائج إلى علاقة معقدة بين التحلل الدموي، الدهون في الدم، واليرقان. يرتبط زيادة التحلل الدموي بارتفاع مستويات الدهون في الدم، بينما يُلاحظ انخفاض في اليرقان. على وجه التحديد، تتأثر مستويات اليرقان المنخفضة بشكل كبير بالدهون في الدم، حيث تظهر زيادة تصل إلى 150%. على العكس، يبدو أن الدهون في الدم تقلل من التحلل الدموي. على الرغم من وجود تحلل دموي ودهون في الدم عالية، لا يؤثر اليرقان بشكل كبير على النتائج، حيث يحافظ على انحراف أقل من 10%. ومع ذلك، عند مستويات مرتفعة من اليرقان (171 ميكرومول/لتر)، هناك انخفاض يقارب 50% في التحلل الدموي المنخفض.
توضح الأشكال 1 و2 هذه النتائج، مع تسليط الضوء على التغيرات النسبية بالنسبة للقيم الأساسية للتحلل الدموي واليرقان. من الجدير بالذكر أن الدهون في الدم تظل غير متأثرة باليرقان، حيث تحدث زيادات زائفة في مؤشر الدهون في الدم فقط عند مستويات التحلل الدموي التي تتجاوز 2.5 جرام/لتر. من المهم أن تُعتبر قيم مؤشر الدهون في الدم المنخفضة موثوقة، مما يشير إلى أن اليرقان لا يضر بدقة قياسات الدهون في الدم. تؤكد هذه النتائج على الحاجة إلى تفسير دقيق لمؤشرات المختبر في وجود هذه الظروف.
المناقشة
في هذه الدراسة، طور المؤلفون خوارزمية قرار تعتمد على مؤشرات التحلل الدموي، اليرقان، والدهون في الدم (HIL)، مع التأكيد على التفاعلات بين هذه المعلمات. أعدوا تجمعات مصل مختلفة، بما في ذلك تجمع أساسي (HIL0) وتجمعات عالية التركيز للتحلل الدموي، الدهون في الدم، واليرقان، مع ضمان معايير صارمة لاختيار العينات لتقليل التداخل. وجدت الدراسة أن قيم التحلل الدموي العالية كانت موثوقة، بينما كانت مؤشرات الدهون في الدم المنخفضة دقيقة، مما أدى إلى صياغة خوارزمية تعتمد على القواعد مصممة لنظام Abbott Alinity c. من الجدير بالذكر أن الخوارزمية قامت بتصنيف التحلل الدموي بناءً على عتبة 5 جرام/لتر، معترفة بأن التحلل الدموي المنخفض يمكن أن يؤثر بشكل كبير على المواد التحليلية الحساسة لمثل هذه التغييرات.
أبرز المؤلفون الحاجة إلى الشفافية من الشركات المصنعة بشأن تداخل HIL، حيث غالبًا ما تفتقر الإرشادات الحالية إلى عتبات محددة لهذه المؤشرات. انتقدوا الاعتماد على المواد الاصطناعية مثل Intralipid لدراسات التداخل، داعين إلى تقييمات تستند إلى عينات مرضى حقيقية. اعترفت الدراسة بالقيود، بما في ذلك عدم القدرة على إنشاء تجمع أساسي بقيم صفرية لمؤشرات HIL والطبيعة الخاصة بالمنصة لنتائجهم. في النهاية، تؤكد الأبحاث على أهمية الخوارزميات المتكاملة التي تأخذ في الاعتبار التداخلات المتبادلة بين مؤشرات HIL لتعزيز دقة وموثوقية نتائج اختبارات المختبر.
DOI: https://doi.org/10.11613/bm.2026.020708
PMID: https://pubmed.ncbi.nlm.nih.gov/42299352
Publication Date: 2026-06-11
Author(s): Soycan Tüner et al.
Primary Topic: Clinical Laboratory Practices and Quality Control
Overview
The study investigates the cross-interference among hemolysis, icterus, and lipemia (HIL), which are common preanalytical factors that can compromise laboratory results. While previous research has focused on the individual effects of these indices, their interactions had not been thoroughly examined. Utilizing patient-derived samples and adhering to the CLSI-EP07 guidelines, the researchers prepared high-concentration pools of icterus, lipemia, and hemolysis, which were then diluted with low-index serum to create defined combinations. The Abbott Alinity c system was employed to measure the indices, and cross-interferences were quantified as percentage biases relative to baseline values.
The findings revealed that high levels of hemolysis did not significantly interact with the other indices; however, hemolysis levels between 2.5-10.0 g/L resulted in a 20-150% false increase in lipemia and a 10-60% false decrease in icterus. Conversely, lipemia levels of 25-100 index caused a 20-150% false increase in icterus and a 10-30% reduction in low levels of hemolysis. Additionally, icterus levels ranging from 42.75-171 µmol/L led to a 15-45% false reduction in low hemolysis levels. The study concluded that assessing HIL indices independently can lead to misinterpretations due to these cross-interferences. To address this issue, the authors propose a rule-based, threshold-dependent algorithm that incorporates these interactions to improve sample quality assessment and laboratory reliability.
Introduction
The introduction highlights the significant preanalytical challenges posed by hemolysis, icterus, and lipemia (HIL), which can compromise the accuracy of routine laboratory tests and lead to misinterpretation of results. Traditionally, these issues were assessed visually, a method criticized for its subjectivity and lack of standardization. The Clinical and Laboratory Standards Institute (CLSI) C56A guideline advocates for the implementation of a detection system for HIL serum indices to enhance sample quality assessment. Notably, in vitro hemolysis is identified as the most prevalent error, affecting up to 3.3% of blood samples and accounting for 40-70% of unsuitable specimens.
The text further discusses the inadequacies of current test rejection protocols, which often rely on cut-off values from reagent manufacturers that do not address the mutual interference among HIL parameters. Previous studies have indicated interactions between hemolysis and icterus, as well as the impact of lipemia on hemolysis; however, comprehensive evaluations of the interdependencies among all three parameters remain lacking. This study aims to investigate the cross-interference of HIL parameters using endogenous patient samples under clinically relevant conditions and to develop a decision algorithm to enhance the evaluation of sample quality.
Methods
In this experimental analytical interference study, conducted in accordance with the CLSI EP07 guideline, the researchers aimed to evaluate the effects of hemolysis, icterus, and lipemia on a target analyte. The study utilized a modified approach to investigate the mutual interactions among these interfering substances, as their presence can influence the measured outcomes. Specifically, the researchers performed serial dilutions of the interfering substances and calculated their recoveries to establish target values for comparison.
The analyses were carried out using the Abbott Alinity c system (Abbott Laboratories, Chicago, USA), ensuring a standardized measurement process. The study received ethical approval from the Uşak University non-interventional studies ethics committee (778-778-20), underscoring the adherence to ethical research practices. This methodological framework allows for a comprehensive understanding of how these common interferences can affect laboratory results, contributing valuable insights to clinical diagnostics.
Results
The results indicate a complex relationship between hemolysis, lipemia, and icterus. An increase in hemolysis correlates with elevated lipemia levels, while a decrease in icterus is noted. Specifically, low icterus levels are significantly influenced by lipemia, showing an increase of up to 150%. Conversely, lipemia appears to reduce hemolysis. Despite the presence of high hemolysis and lipemia, icterus does not significantly affect the results, maintaining a bias of less than 10%. However, at elevated icterus levels (171 µmol/L), there is a nearly 50% reduction in low-level hemolysis.
Figures 1 and 2 illustrate these findings, highlighting the percentage changes relative to baseline values for hemolysis and icterus. Notably, lipemia remains unaffected by icterus, with false increases in the lipemia index occurring only at hemolysis levels exceeding 2.5 g/L. Importantly, low lipemia index values are deemed reliable, indicating that icterus does not compromise the accuracy of lipemia measurements. These results underscore the need for careful interpretation of laboratory indices in the presence of these conditions.
Discussion
In this study, the authors developed a decision algorithm based on hemolysis, icterus, and lipemia (HIL) indices, emphasizing the interactions among these parameters. They prepared various serum pools, including a baseline pool (HIL0) and high-concentration pools for hemolysis, lipemia, and icterus, ensuring strict criteria for sample selection to minimize interference. The study found that high hemolysis values were reliable, while low lipemia indices were accurate, leading to the formulation of a rule-based algorithm tailored for the Abbott Alinity c system. Notably, the algorithm stratified hemolysis based on a threshold of 5 g/L, recognizing that low-level hemolysis could significantly affect analytes sensitive to such changes.
The authors highlighted the need for transparency from manufacturers regarding HIL interference, as existing guidelines often lack specific thresholds for these indices. They criticized the reliance on artificial substances like Intralipid for interference studies, advocating for evaluations based on real patient samples. The study acknowledged limitations, including the inability to create a baseline pool with zero HIL indices and the platform-specific nature of their findings. Ultimately, the research underscores the importance of integrated algorithms that account for mutual interferences among HIL indices to enhance the accuracy and reliability of laboratory test results.
