DOI: https://doi.org/10.1038/s40494-026-02821-z
تاريخ النشر: 2026-07-11
المؤلف: Baoyuan Deng وآخرون
الموضوع الرئيسي: تقنيات التصوير الحراري والصوتيات الضوئية
نظرة عامة
تقدم هذه الدراسة تقنية جديدة للتصوير الحراري النشط ثلاثي الأبعاد باستخدام مسح خط الليزر لفحص دقيق للقطع الثقافية الخشبية المطلية. من خلال دمج تحفيز خط الليزر المستمر مع كاميرا الأشعة تحت الحمراء، طور الباحثون إطار عمل موحد يستخدم تحويلات مكانية ومصفوفات معايرة زمنية. هذه الطريقة تربط بشكل فعال الاستجابات الحرارية العابرة مع الإحداثيات الهندسية ثلاثية الأبعاد، مما يسمح بإعادة بناء تضاريس السطح وتوقيعات العيوب الداخلية في وقت واحد دون الحاجة إلى معدات مسح ثلاثية الأبعاد خارجية.
أكدت التحقق التجريبي على طبق لاكيه بأسلوب عتيق يحتوي على تسعة ثقوب مسطحة مسبقة الصنع (مع نسب قطر إلى عمق تتراوح من 2.5 إلى 15) فعالية الطريقة في اكتشاف الشذوذات تحت السطحية مع الحفاظ على زيادة درجة حرارة طفيفة تبلغ حوالي 1.61 درجة مئوية، مما يضمن السلامة الحرارية للمواد التراثية العضوية. تسلط النتائج الضوء على أن هذه التقنية الخفيفة وغير التلامسية توفر تصورًا بديهيًا للعلاقة بين الزخرفة السطحية والانهيار الداخلي، مما يقدم حلاً قويًا للحفاظ الرقمي الوقائي والترميم للأعمال الخشبية المعقدة.
مقدمة
تؤكد مقدمة هذه الورقة البحثية على الدور الحاسم لتقنيات الاختبار غير التدميري (NDT) في الحفاظ على التراث الثقافي والترميم العلمي. على عكس الطرق التدميرية التقليدية، يسمح NDT بتقييم تركيب المواد وسلامة الهيكل دون إتلاف القطع الأثرية. يتم تسليط الضوء على التصوير الحراري بالأشعة تحت الحمراء (IRT) كأحد الأنماط البارزة لـ NDT، وهو فعال بشكل خاص في اكتشاف العيوب في التراث الثابت الكبير، مثل الجداريات والقطع الحجرية، وكذلك في القطع المنقولة مثل المواد المعدنية والمركبة. تشمل مزايا IRT التشغيل غير التلامسي، والفحص السريع، والقدرة على تصور المعلومات تحت السطحية، مما يجعله لا يقدر بثمن في الحفاظ على التراث الثقافي.
تناقش الورقة أيضًا قيود طرق التحفيز الحراري الحالية، خاصة في تحقيق إدخال حرارة موحد والتقاط بيانات ثلاثية الأبعاد. بينما غالبًا ما تفشل مصادر الحرارة الضوئية التقليدية، تقدم تقنية التصوير الحراري بالتحفيز بالليزر خطًا تحكمًا وحساسية محسنة. كما يتم فحص إدخال تقنيات إعادة البناء ثلاثية الأبعاد، بما في ذلك الطرق التقليدية والطرق المعتمدة على التعلم العميق، مع الإشارة إلى التحديات المتعلقة بدمج الشكل السطحي مع اكتشاف العيوب الداخلية. لمعالجة هذه القضايا، تقترح الدراسة طريقة جديدة للتصوير الحراري النشط ثلاثي الأبعاد الديناميكي الأحادي التي تبسط متطلبات النظام وتعزز دمج البيانات الحرارية والهندسية، مما يدعم جهود الفحص غير التدميري الفعالة والحفاظ على القطع الأثرية الثقافية.
طرق
في هذه الدراسة، يقدم المؤلفون منهجية شاملة لتقييم الخصائص الحرارية الفيزيائية لمركبات الخشب المطلي، والتي تكون عرضة لمختلف العيوب بسبب هيكلها المعقد وتفاعلاتها البيئية. يجمع إطار الفحص المتكامل المقترح بين التصوير الحراري بالليزر مع إعادة البناء الديناميكية ثلاثية الأبعاد الأحادية، مما يسمح بتحليل موحد للبيانات الحرارية والمعلومات الطبوغرافية. هذه الطريقة ضرورية لفهم آليات الانهيار وتطوير استراتيجيات الحفاظ الفعالة للأعمال الخشبية المطلية، وهي قطعة ثقافية هامة.
يتكون الإعداد التجريبي من مولد ليزر، وكاميرا حرارية بالأشعة تحت الحمراء، ومحرك، ولوحة فحص معايرة لتحديد العلاقات الهندسية المكانية بين المكونات. تم تصميم النظام لضمان قياسات ثلاثية الأبعاد دقيقة من خلال ترتيب مستوى ضوء الليزر عموديًا على مستوى المرجع للعنصر الذي يتم فحصه. يعمل نظام الليزر عند طول موجي يبلغ 808 نانومتر، مع قدرة قابلة للتعديل تصل إلى 10 واط، بينما تلتقط الكاميرا الحرارية البيانات بدقة 1280 × 1024 بكسل. يستخدم نظام الحركة استراتيجية “ليزر ثابت – عينة متحركة”، مما يسمح بتحفيز محكم للسطح بينما تتحرك العينة تحت خط الليزر، مما يسهل اكتشاف العيوب السطحية وتحت السطحية.
نتائج
تتناول قسم النتائج تطبيق نهج التصوير الحراري النشط ثلاثي الأبعاد بالليزر لفحص غير التدميري لعينات الأطباق المطلية ذات العيوب الموجودة مسبقًا. تضمنت المنهجية استخدام ليزر خطي مستمر للتحفيز، بينما قامت كاميرا الأشعة تحت الحمراء بالتقاط تسلسلات الصور الحرارية لإعادة بناء مجال درجة الحرارة. تم تحليل ميزات العيوب من خلال تحليل سعة فورييه، وتم دمج البيانات الحرارية مع سحابة نقاط تم مسحها بالليزر ثلاثية الأبعاد لإنشاء نموذج درجة حرارة ثلاثي الأبعاد شامل للطبق المطلي.
نجحت الدراسة في تحديد الشذوذات تحت السطحية بأحجام متفاوتة، مما يظهر فعالية التقنية. سهل دمج البيانات الهندسية والحرارية التصور المتزامن لكل من الشكل السطحي والانهيار الداخلي، مما يبرز إمكانيات الطريقة في تطبيقات تشخيص التراث الثقافي.
مناقشة
في هذه الدراسة، تم إعداد طبق مطلي بأسلوب عتيق بعناية للتحقيق في خصائص الاستجابة الحرارية الفيزيائية للقطع الخشبية المطلية التقليدية. تم تصنيع الركيزة من خشب فاجوس سيلفاتيك، وتم إنهاؤها بعدة طبقات من اللاتكس الطبيعي، وتم إدخال عيوب اصطناعية لمحاكاة الانهيار الداخلي. كانت هذه العيوب متنوعة في القطر (5 مم، 10 مم، و15 مم) والعمق (1.0 مم، 1.5 مم، و2.0 مم)، مما خلق تدرجًا في نسب القطر إلى العمق من 2.50 إلى 15.00. تم ضمان دقة تصنيع العيوب من خلال تشغيل CNC، مما سمح بدراسة محكومة للاستجابات الحرارية باستخدام التصوير الحراري بالليزر.
استخدمت تقنية التصوير الحراري بالليزر ليزر خطي للتسخين المحلي بينما قامت كاميرا الأشعة تحت الحمراء بالتقاط تطور درجة الحرارة الناتج. تأثرت الاستجابة الحرارية ليس فقط بالعيوب المدخلة ولكن أيضًا بالهيكل متعدد الطبقات من اللاتكس والخشب، مما يتطلب اعتبارًا دقيقًا لهذه العوامل في تفسير البيانات. أنشأت الدراسة إطارًا رياضيًا يعتمد على معادلة انتشار الحرارة ثلاثية الأبعاد لنمذجة مجال درجة الحرارة العابرة. أشارت النتائج إلى أن العيوب ذات نسب القطر إلى العمق الأعلى أنتجت شذوذات حرارية أكثر وضوحًا، مما زاد من إمكانية اكتشافها. سمح دمج البيانات الحرارية مع إعادة البناء السطحية ثلاثية الأبعاد بتصور شامل لشكل وخصائص الحرارة للطبق المطلي، مما يكشف أن العيوب الأكبر أظهرت توقيعات حرارية أوضح مقارنة بالعيوب الأصغر، التي غالبًا ما كانت مغطاة بتعقيدات السطح.
DOI: https://doi.org/10.1038/s40494-026-02821-z
Publication Date: 2026-07-11
Author(s): Baoyuan Deng et al.
Primary Topic: Thermography and Photoacoustic Techniques
Overview
This study introduces a novel monocular 3D active thermography technique utilizing laser line scanning for the precise inspection of lacquered wooden cultural artifacts. By combining continuous line-laser excitation with an infrared camera, the researchers developed a unified mapping framework that employs spatial transformation and temporal calibration matrices. This approach effectively correlates transient thermal responses with three-dimensional geometric coordinates, allowing for the simultaneous reconstruction of surface topography and internal defect signatures without the need for external 3D scanning equipment.
Experimental validation on an antique-style lacquer plate featuring nine prefabricated flat-bottom holes (with diameter-to-depth ratios ranging from 2.5 to 15) confirmed the method’s efficacy in detecting subsurface anomalies while maintaining a minimal temperature increase of approximately 1.61°C, thus ensuring the thermal safety of organic heritage materials. The findings highlight that this lightweight, non-contact technique provides an intuitive visualization of the relationship between surface decoration and internal degradation, presenting a robust solution for the digital preventive conservation and restoration of intricate lacquerware.
Introduction
The introduction of this research paper emphasizes the critical role of non-destructive testing (NDT) techniques in the conservation and scientific restoration of cultural heritage. Unlike traditional destructive methods, NDT allows for the assessment of material composition and structural integrity without damaging the artifacts. Infrared thermography (IRT) is highlighted as a prominent NDT modality, particularly effective in detecting defects in large-scale immovable heritage, such as murals and stone artifacts, as well as in movable relics like metallic and composite materials. The advantages of IRT include non-contact operation, rapid inspection, and the ability to visualize subsurface information, making it invaluable for preserving cultural heritage.
The paper further discusses the limitations of existing thermal excitation methods, particularly in achieving uniform heat input and capturing three-dimensional data. While traditional optical heat sources often fall short, line-scanning excitation thermography offers improved controllability and sensitivity. The introduction of three-dimensional reconstruction techniques, including traditional and deep learning-based methods, is also examined, noting the challenges of integrating surface morphology with internal defect detection. To address these issues, the study proposes a novel monocular dynamic three-dimensional active thermography method that simplifies the system requirements and enhances the integration of thermal and geometric data, thereby supporting efficient non-destructive inspection and conservation efforts for cultural heritage artifacts.
Methods
In this study, the authors present a comprehensive methodology for assessing the thermophysical properties of lacquer-wood composites, which are susceptible to various defects due to their complex structure and environmental interactions. The proposed integrated inspection framework combines laser scanning thermography with monocular dynamic three-dimensional reconstruction, allowing for a unified analysis of thermal data and topographic information. This approach is crucial for understanding degradation mechanisms and developing effective conservation strategies for lacquerware, a significant cultural artifact.
The experimental setup consists of a laser generator, an infrared thermal camera, an actuator, and a calibration checkerboard to establish spatial geometric relationships among the components. The system is designed to ensure accurate 3D measurements by carefully arranging the laser light plane perpendicular to the reference plane of the object being inspected. The laser system operates at a wavelength of 808 nm, with adjustable power up to 10 W, while the thermal camera captures data at a resolution of 1280 × 1024 pixels. The motion subsystem employs a “fixed laser-moving specimen” strategy, allowing for controlled excitation of the surface as the specimen translates beneath the laser line, facilitating the detection of surface and near-surface defects.
Results
The results section details the application of a laser monocular 3D active thermography approach for the non-destructive inspection of lacquer plate specimens with pre-existing defects. The methodology involved using a continuous line laser for scanning excitation, while an infrared camera captured thermal image sequences to reconstruct the temperature field. Defect features were analyzed through Fourier amplitude analysis, and the thermal data were integrated with a 3D laser-scanned point cloud to create a comprehensive three-dimensional temperature model of the lacquer plate.
The study successfully identified subsurface anomalies of varying sizes, showcasing the effectiveness of the technique. The fusion of geometric and thermal data facilitated the simultaneous visualization of both surface morphology and internal deterioration, underscoring the method’s potential for applications in cultural heritage diagnostics.
Discussion
In this study, an antique-style lacquer plate was meticulously prepared to investigate the thermophysical response characteristics of traditional lacquered wooden artifacts. The substrate, made from Fagus sylvatica wood, was finished with multiple layers of natural lacquer, and artificial defects were introduced to simulate internal deterioration. These defects varied in diameter (5 mm, 10 mm, and 15 mm) and depth (1.0 mm, 1.5 mm, and 2.0 mm), creating a gradient of diameter-to-depth ratios from 2.50 to 15.00. The precision of the defect fabrication was ensured through CNC machining, allowing for a controlled study of thermal responses using laser scanning thermography.
The laser scanning thermography technique employed a line laser for localized heating while an infrared camera captured the resulting temperature evolution. The thermal response was influenced not only by the introduced defects but also by the multilayer structure of the lacquer and wood, necessitating careful consideration of these factors in data interpretation. The study established a mathematical framework based on the three-dimensional heat diffusion equation to model the transient temperature field. Results indicated that defects with higher diameter-to-depth ratios produced more pronounced thermal anomalies, enhancing detectability. The integration of thermal data with 3D surface reconstruction allowed for a comprehensive visualization of the lacquer plate’s morphology and thermal characteristics, revealing that larger defects exhibited clearer thermal signatures compared to smaller ones, which were often masked by surface complexities.
