التصوير القائم على الارتباط الذاتي للانقطاعات القشرية بما في ذلك الدفع الرئيسي للهيمالايا ونسبة Vp/Vs في هيمالايا جامو وكشمير Autocorrelation‐Based Imaging of Crustal Discontinuities Including the Main Himalayan Thrust and Vp/Vs Ratio in the Jammu and Kashmir Himalaya

شارك:
المجلة: Journal of Geophysical Research Solid Earth، المجلد: 131، العدد: 4
DOI: https://doi.org/10.1029/2025jb032764
تاريخ النشر: 2026-04-01
المؤلف: Hari Ram Thapa وآخرون
الموضوع الرئيسي: دراسات الزلازل والتكتونيات

نظرة عامة

تدرس هذه الدراسة التركيب القشري لجبال الهيمالايا في جامو وكشمير، وهي فجوة زلزالية مهمة تقع بين مناطق الانكسار لزلزالي كانغرا عام 1905 وزلزال كشمير عام 2005. باستخدام تداخل الموجات P التلسيسمي لأول مرة في هذه المنطقة، تكشف الأبحاث عن رؤى حاسمة حول سمك الرواسب، أعماق موهو، وهندسة الدفع الرئيسي للهيمالايا (MHT). تشير النتائج إلى أن سمك الرواسب يبلغ حوالي 7 كم في حوض السهل، مع تراجع تدريجي نحو الشمال. يظهر موهو هيكلًا مسطحًا في المنطقة الجنوبية، مع انخفاض محلي بين الدفع الرئيسي للحدود (MBT) وMCT، وعمق شمال MCT، مما يتماشى مع زيادة سمك القشرة بسبب الاصطدام القاري والانزلاق. تشير النسب المرتفعة Vp/Vs (حتى 1.85) في مناطق تراجع موهو إلى درجات حرارة أعلى أو انصهارات جزئية، مما يدل على وجود عمليات حرارية وميكانيكية معقدة.

تحدد الدراسة أيضًا هندسة ramp-flat-ramp لـ MHT، مما يقدم تقسيمًا داخليًا ضمن المنطقة الزلزالية، مما قد يركز الإجهاد ويؤثر على ديناميات الانكسار. تدعم هذه التكوينات الهيكلية فرضية زلزال 1555 كدفع عميق أعمى وتقترح تراكمًا كبيرًا في العجز في الانزلاق، مما يساهم في استمرار الفجوة الزلزالية على الرغم من التقارب المستمر بحوالي 11 مم/سنة. تؤكد النتائج على ضرورة إعادة تقييم نماذج المخاطر الزلزالية الإقليمية، حيث تشير هندسة MHT المعدلة إلى احتمال مرتفع لحدوث زلازل كبيرة عمياء في المستقبل. ستركز الأبحاث المستقبلية على تطوير نموذج قشرة ثلاثي الأبعاد عالي الدقة لموجات S لتوضيح هيكل سرعة الزلازل وآثاره على تباين القشرة والمخاطر الزلزالية.

مقدمة

تشكلت جبال الهيمالايا وهضبة التبت نتيجة الاصطدام المستمر بين الصفائح الهندية والأوراسية، بمعدل تقارب يبلغ حوالي 38 مم/سنة. أدى هذا التفاعل إلى تطوير سلسلة من أنظمة الفوالق الدفعية، مع التركيز بشكل بارز على الدفع الرئيسي للهيمالايا (MHT)، الذي يحدد الانزلاق تحت الصفائح الهندية من الوتد الهيمالاوي. يظهر MHT هندسة معقدة، مع جزء سطحي مقفل احتكاكي يجمع الإجهاد المرن، مما قد يؤدي إلى زلازل كبيرة. كانت منطقة جامو وكشمير، الواقعة بين زلازل تاريخية ملحوظة، أقل دراسة بسبب محدودية البيانات الجيوفيزيائية، على الرغم من مخاطرها الزلزالية الكبيرة.

بدأت التطورات الأخيرة في وظائف مستقبلات الموجات P ودراسات مصادر الزلازل في إلقاء الضوء على التركيب القشري والفوالق الزلزالية في هذه المنطقة التي لم تُدرس بشكل كافٍ. باستخدام طريقة تداخل الموجات P، تقدر هذه الدراسة أعماق MHT وطبقة الرواسب فوقها عبر 22 محطة زلزالية واسعة النطاق. تشير النتائج إلى أن عمق MHT يتراوح من حوالي 9 إلى 19 كم، مع هندسة ramp-flat-ramp مميزة، مما يتناقض مع التفسيرات السابقة لهيكل يتعمق بشكل موحد. بالإضافة إلى ذلك، يختلف سمك طبقة الرواسب، حيث يصل إلى حد أقصى يبلغ حوالي 7 كم جنوب الدفع الأمامي الرئيسي (MFT) وينخفض إلى حوالي 3 كم شمال الدفع المركزي الرئيسي (MCT). تعزز هذه النتائج فهم المخاطر الزلزالية والديناميات القشرية في المنطقة.

النتائج

يقدم قسم “النتائج” من ورقة البحث النتائج الرئيسية المستمدة من التجارب أو التحليلات التي تم إجراؤها. يبرز النتائج المهمة التي تدعم الفرضيات أو أسئلة البحث المطروحة سابقًا في الدراسة. عادةً ما يتم توضيح النتائج من خلال أشكال مختلفة من تمثيل البيانات، مثل الجداول، الرسوم البيانية، أو المعادلات، التي توفر تصورًا واضحًا للاتجاهات والأنماط الملحوظة.

في هذا القسم، قد يناقش المؤلفون أيضًا الأهمية الإحصائية لنتائجهم، غالبًا باستخدام قيم p أو فترات الثقة لدعم ادعاءاتهم. بالإضافة إلى ذلك، يتم تناول أي نتائج غير متوقعة أو شذوذ، مما يوفر نظرة شاملة على نتائج البحث. بشكل عام، تعتبر النتائج أساسًا للنقاش اللاحق وتفسير آثار النتائج ضمن السياق الأوسع للمجال.

نقاش

يسلط قسم النقاش في ورقة البحث الضوء على الخصائص الزلزالية لجبال الهيمالايا في جامو وكشمير، التي تم تحديدها كـ “فجوة زلزالية” مع تراكم إجهاد كبير منذ آخر زلزال رئيسي في 1555. تؤكد الدراسة على أهمية فهم هندسة الدفع الرئيسي للهيمالايا (MHT) والخصائص الهيكلية للوتد الهيمالاوي والقشرة الهندية المنزاحة لتقييم المخاطر الزلزالية. باستخدام تداخل الموجات P التلسيسمي، يقدر المؤلفون بشكل مشترك أعماق MHT وموهو وواجهة الرواسب-الأساس، مما يوفر رؤى جديدة حول خصائص المواد القشرية، بما في ذلك نسب Vp/Vs، التي تشير إلى وجود سوائل وخصائص الرواسب.

تكشف النتائج عن تباين ملحوظ في سمك الرواسب، حيث يصل الحد الأقصى إلى حوالي 7 كم في حوض السهل، وينخفض نحو الشمال. يظهر MHT خصائص مقاومة متناقضة عبر الدفع المركزي الرئيسي (MCT)، مع تباين إيجابي نحو الجنوب وتباين سلبي نحو الشمال، يُعزى إلى منطقة سرعة منخفضة (LVZ) تحت MHT. تُفسر هذه LVZ، التي يبلغ سمكها حوالي 3-5 كم، على أنها مواد ضعيفة أو مشبعة جزئيًا بالسوائل، مما يؤثر على تراكم الإجهاد والسلوك الزلزالي في المنطقة. تؤكد نتائج الدراسة على تعقيد هندسة MHT، التي تتميز بهيكل ramp-flat-ramp، مما قد يؤثر على الاستجابة الزلزالية والاحتمالية للانزلاق خلال الزلازل الكبيرة، وبالتالي يساهم في فهم أفضل للمخاطر الزلزالية في المنطقة.

Journal: Journal of Geophysical Research Solid Earth, Volume: 131, Issue: 4
DOI: https://doi.org/10.1029/2025jb032764
Publication Date: 2026-04-01
Author(s): Hari Ram Thapa et al.
Primary Topic: earthquake and tectonic studies

Overview

This study investigates the crustal structure of the Jammu and Kashmir Himalaya, a significant seismic gap situated between the rupture zones of the 1905 Kangra and 2005 Kashmir earthquakes. Utilizing teleseismic P-wave coda autocorrelation for the first time in this region, the research reveals critical insights into sediment thickness, Moho depths, and the geometry of the Main Himalayan Thrust (MHT). The findings indicate sediment thicknesses of approximately 7 km in the foreland basin, with a progressive thinning to the north. The Moho exhibits a flat structure in the southern region, localized shallowing between the Main Boundary Thrust (MBT) and MCT, and deepening north of the MCT, which aligns with crustal thickening due to continental collision and underthrusting. Elevated Vp/Vs ratios (up to 1.85) in areas of Moho thinning suggest higher temperatures or partial melts, indicating complex thermal and mechanical processes at play.

The study also identifies a ramp-flat-ramp geometry of the MHT, which introduces internal segmentation within the seismogenic zone, potentially concentrating strain and influencing rupture dynamics. This structural configuration supports the hypothesis of the 1555 earthquake as a deep blind thrust and suggests a significant slip deficit accumulation, contributing to the persistence of the seismic gap despite ongoing convergence of approximately 11 mm/yr. The results underscore the necessity for a reassessment of regional seismic hazard models, as the revised MHT geometry indicates a heightened potential for future large blind earthquakes. Future research will focus on developing a high-resolution 3D S-wave crustal model to further elucidate the seismic velocity structure and its implications for crustal heterogeneity and seismic risk.

Introduction

The Himalayan Mountains and the Tibetan Plateau were formed by the ongoing collision between the Indian and Eurasian Plates, with a convergence rate of approximately 38 mm/year. This interaction has led to the development of a series of thrust fault systems, prominently featuring the Main Himalayan Thrust (MHT), which delineates the under-thrusting Indian Plate from the Himalayan wedge. The MHT exhibits a complex geometry, with a frictionally locked shallow segment that accumulates elastic strain, potentially leading to significant earthquakes. The Jammu and Kashmir region, situated between notable historical earthquakes, has been less studied due to limited geophysical data, despite its significant seismic hazard.

Recent advancements in P-wave receiver functions and earthquake source studies have begun to illuminate the crustal structure and seismogenic faults in this under-researched area. Utilizing the P-wave autocorrelation method, this study estimates the depths of the MHT and the overlying sedimentary layer across 22 broadband seismic stations. The findings indicate that the MHT depth ranges from approximately 9 to 19 km, with a distinct ramp-flat-ramp geometry, contrasting with previous interpretations of a uniformly deepening structure. Additionally, the sedimentary layer thickness varies, reaching a maximum of about 7 km south of the Main Frontal Thrust (MFT) and decreasing to approximately 3 km north of the Main Central Thrust (MCT). These results enhance the understanding of the region’s seismic risk and crustal dynamics.

Results

The “Results” section of the research paper presents the key findings derived from the conducted experiments or analyses. It highlights the significant outcomes that support the hypotheses or research questions posed earlier in the study. The results are typically illustrated through various forms of data representation, such as tables, graphs, or equations, which provide a clear visualization of the trends and patterns observed.

In this section, the authors may also discuss the statistical significance of their findings, often employing p-values or confidence intervals to substantiate their claims. Additionally, any unexpected results or anomalies are addressed, providing a comprehensive overview of the research outcomes. Overall, the results serve as a foundation for the subsequent discussion and interpretation of the implications of the findings within the broader context of the field.

Discussion

The discussion section of the research paper highlights the seismic characteristics of the Jammu and Kashmir Himalaya, identified as a “seismic gap” with significant strain accumulation since the last major earthquake in 1555. The study emphasizes the importance of understanding the geometry of the Main Himalayan Thrust (MHT) and the structural properties of the Himalayan wedge and underthrust Indian crust to assess seismic hazards. Utilizing teleseismic P-wave coda autocorrelation, the authors jointly estimate the depths of the MHT, Moho, and sediment-basement interface, providing new insights into crustal material properties, including Vp/Vs ratios, which indicate the presence of fluids and sediment characteristics.

The results reveal a notable variation in sediment thickness, with the maximum reaching approximately 7 km in the foreland basin, decreasing towards the north. The MHT exhibits contrasting impedance characteristics across the Main Central Thrust (MCT), with a positive contrast to the south and a negative contrast to the north, attributed to a low-velocity zone (LVZ) beneath the MHT. This LVZ, approximately 3-5 km thick, is interpreted as weak or partially fluid-saturated material, influencing strain accumulation and seismic behavior in the region. The study’s findings underscore the complexity of the MHT’s geometry, characterized by a ramp-flat-ramp structure, which may affect the seismic response and potential slip during large earthquakes, thereby contributing to a better understanding of seismic risks in the area.