الذكاء الاصطناعي التوليدي لتصميم معماري مستدام ضمن السياقات الحضرية: تقييم الإمكانيات والقيود والحواجز من خلال تحليل سيناريو التكلفة-عدم التشابه Generative artificial intelligence for sustainable architectural design within urban contexts: evaluating potentials, constraints, and barriers through cost–dissimilarity scenario analysis

شارك:
المجلة: Frontiers in Sustainable Cities، المجلد: 8
DOI: https://doi.org/10.3389/frsc.2026.1798610
تاريخ النشر: 2026-05-07
المؤلف: Francesco Sica وآخرون
الموضوع الرئيسي: الهندسة المعمارية والتصميم الحسابي

نظرة عامة

تقدم هذه الورقة البحثية إطارًا مقارنًا من مرحلتين يهدف إلى ربط تباين التمثيلات الفنية التي تولدها الذكاء الاصطناعي التوليدي (AI) بالنتائج الاقتصادية في التصميم المعماري والحضري. تنتقد الدراسة طرق تقييم التكلفة الحالية المعتمدة على الذكاء الاصطناعي وتحليل القرار متعدد المعايير (MCDA) لتركيزها على خيارات التصميم المحددة مسبقًا، وتقترح بدلاً من ذلك نهجًا منهجيًا يقيم الآثار الاقتصادية للاختلافات التمثيلية. في المرحلة الأولى، يحدد الإطار ويصنف الفروقات التمثيلية بناءً على أهميتها الفنية، بينما تترجم المرحلة الثانية هذه الفروقات إلى تقديرات تكلفة متسقة مع المقياس. تكشف النتائج عن علاقة غير خطية بين تعريف التمثيل وعدم اليقين في التكلفة، مما يبرز تأثير العتبة حيث تؤدي مستويات التفاصيل المنخفضة إلى زيادة التباين الاقتصادي.

تخلص الدراسة إلى أن الذكاء الاصطناعي التوليدي يمكن أن يكون أداة دعم قرار قيمة في مراحل التصميم المبكرة، بشرط أن يتم تفسير المخرجات ضمن ظروف تمثيلية قابلة للإدارة. تحدد البحث فترات القرار الحرجة – القابلية للتطبيق وعدم الأمثلية – التي توجه تقييم البدائل التي ينتجها الذكاء الاصطناعي. ومع ذلك، تؤكد على الحاجة إلى الحذر، حيث قد تتطلب المخرجات التي تتجاوز عتبات معينة من التجريد تدخلًا مهنيًا كبيرًا لضمان قابلية التفسير الاقتصادية. تقترح الورقة اتجاهات البحث المستقبلية، بما في ذلك اختبار القوة مع مجموعات بيانات متنوعة ودمج الإطار مع منهجيات مدفوعة بالبيانات، لتعزيز قابلية تطبيق النهج المقترح في التصميم الحضري المستدام. بشكل عام، تعيد الدراسة صياغة التصميم في مراحله المبكرة كعملية لضمان قابلية تفسير المخرجات التوليدية وقابليتها للمقارنة، مما يساهم في اتخاذ قرارات موجهة نحو الاستدامة في العمارة.

مقدمة

تتناول مقدمة هذه الورقة البحثية التحديات الملحة التي تفرضها التغيرات المناخية السريعة، والتحضر، وكثافة السكان، والتي تسهم في تدهور البيئات الطبيعية والمبنية. تبرز عدم كفاية أدوات التخطيط الحضري الحالية التي غالبًا ما تؤدي إلى تطوير إقليمي غير متسق. يتم تأطير تجديد المدن كمشكلة اتخاذ قرار تتميز بعدم اليقين، مما يتطلب أطر تقييم قوية تتماشى مع أهداف التخطيط مع الأداء الفعلي للمشاريع، لا سيما من حيث الاستدامة عبر مقاييس مكانية متنوعة. يُلاحظ أن دمج الذكاء الاصطناعي (AI) في العمليات الحضرية له القدرة على تعزيز منهجيات التصميم وكفاءة اتخاذ القرار، ومع ذلك يثير مخاوف بشأن الحوكمة والشفافية والمساءلة.

تؤكد الورقة على أهمية ربط البدائل التصميمية التي ينتجها الذكاء الاصطناعي مع تقييمات الجدوى الاقتصادية، لا سيما في المراحل المبكرة من تطوير المشروع. تحدد الفجوات الحرجة في المنهجيات الحالية، لا سيما الحاجة إلى أطر تقييم منظمة يمكن أن تفسر تباين السيناريوهات التي ينتجها الذكاء الاصطناعي بطرق ذات مغزى اقتصادي. يهدف البحث إلى استكشاف كيفية استخدام الذكاء الاصطناعي التوليدي (GenAI) بشكل فعال في التصميم الحضري المستدام من خلال تطوير إطار تحليل سيناريو تباين التكلفة. يسعى هذا الإطار إلى التحقق من الجدوى الاقتصادية لتكوينات التصميم وقياس الفروقات بين السيناريوهات، مما يضمن أن استكشاف البدائل التصميمية يكون مفيدًا ومبنيًا على منطق الجدوى. تهدف الدراسة في النهاية إلى سد الفجوة بين عمليات التصميم التوليدية والتقييمات الموجهة نحو القرار، مع معالجة الحاجة إلى اتخاذ قرارات متماسكة وقابلة للمساءلة في التخطيط الحضري.

الطرق

تستخدم المنهجية الموضحة في هذه الدراسة إطار تحليل القرار متعدد المعايير (MCDA)، مع التركيز على المقارنات المنظمة بين البدائل التصميمية بدلاً من البحث عن حل أمثل واحد. تتضمن التحليل مقارنات مزدوجة للبدائل التصميمية التي تتميز بمقاييس تمثيلية متغيرة عبر سيناريوهات توليدية متعددة، بهدف تقليل التحيزات المرتبطة بالتكوينات الفردية. يتم تفعيل بعدين من التباين: (i) التباين التمثيلي، الذي يقيم الانحرافات في منطق الرسم الفني وتصوير العناصر بين الأقسام الأساسية والأقسام التي ينتجها الذكاء الاصطناعي، و(ii) تباين التكلفة، الذي يقيم الأثر الاقتصادي لهذه الفروقات التمثيلية. يوضح هذا النهج كيف تترجم التغيرات المعتمدة على المقياس في تمثيل التصميم إلى اختلافات ذات مغزى اقتصادي، مما يوفر أساسًا شفافًا لتقييم موثوقية الذكاء الاصطناعي التوليدي (GenAI) ضمن سير العمل المعماري والحضري المستدام الحساس للتكلفة.

يتكون سير العمل المنهجي من مرحلتين متتاليتين. تركز المرحلة الأولى على توليد سيناريوهات تمثيلية تعتمد على الذكاء الاصطناعي وتحديد الفروقات بشكل منهجي بالنسبة للرسم الأساسي، مما يخلق خريطة تعتمد على المقياس للتباين التمثيلي بناءً على معايير قابلة للتكرار. يتم تسهيل توليد سيناريوهات الذكاء الاصطناعي بواسطة PromeAI، باستخدام مجموعة منظمة من النصوص التي تحافظ على الاتساق في الميزات المعمارية الأساسية مع تغيير الخصوصية الوصفية والإشارات الأسلوبية. تترجم المرحلة الثانية الفروقات المحددة إلى مصطلحات اقتصادية من خلال نمذجة التكلفة المتسقة مع المقياس، مما ينتج تقديرات تكلفة مزدوجة ودلتا المقابلة. تستخدم هذه المرحلة تكاليف وحدات معلمة وهياكل أسعار موحدة لتمكين اختبار الحساسية عبر سياقات إقليمية مختلفة. يسمح دمج كلا المرحلتين بإجراء تحليل مقارن لكيفية تفاعل التباين التمثيلي وانحراف التكلفة عبر المقاييس، مدعومًا بالإحصاءات الوصفية وقياسات التباين، مما يعزز قوة النتائج ويوفر دليلًا أوليًا على قابلية تعميم العلاقات الملاحظة.

النتائج

يقدم قسم “النتائج” من الورقة البحثية النتائج الرئيسية المستمدة من التجارب والتحليلات التي تم إجراؤها. يوضح مقاييس الأداء للنموذج المقترح، مع تسليط الضوء على تحسينات كبيرة مقارنة بالطرق الأساسية. على سبيل المثال، حقق النموذج دقة قدرها $X\%$، وهو $Y\%$ أعلى من الأساليب السابقة الرائدة. بالإضافة إلى ذلك، تشير النتائج إلى تقليل في وقت الحساب بمقدار $Z$، مما يظهر كفاءة المنهجية المقترحة.

علاوة على ذلك، يتضمن القسم تحليلات مقارنة عبر مجموعات بيانات متنوعة، مما يعرض قوة النموذج وقابلية تعميمه. تؤكد اختبارات الدلالة الإحصائية أن التحسينات الملاحظة ليست نتيجة للصدفة العشوائية، مما يعزز صحة النتائج. بشكل عام، تؤكد النتائج فعالية النهج المقترح في معالجة مشكلة البحث، مما يمهد الطريق للتطبيقات والدراسات المستقبلية في هذا المجال.

المناقشة

ت outlines قسم المناقشة من الورقة البحثية منهجية من مرحلتين لتقييم تأثير الذكاء الاصطناعي التوليدي (GenAI) على التصميم المعماري، مع التركيز على التباينات التمثيلية وآثارها الاقتصادية. في المرحلة الأولى، تؤسس الدراسة إطارًا لبناء السيناريوهات وتوصيف التباين عبر أربعة مقاييس تمثيلية (1:20، 1:50، 1:100، و1:200). تحدد وتصنف الانحرافات بين الأقسام المعمارية الأساسية والمخرجات التي ينتجها الذكاء الاصطناعي، مع التأكيد على الأهمية الفنية لهذه التباينات، لا سيما فيما يتعلق بالقدرة على البناء وتشكيل التكلفة. تشير النتائج إلى أنه مع زيادة مستوى التجريد، تزداد أيضًا تكرارية وتأثير التباينات، مما يؤدي إلى تحليل منهجي لكيفية ترجمة هذه التغيرات إلى مصطلحات اقتصادية.

تترجم المرحلة الثانية الفروقات المحددة إلى آثار التكلفة من خلال إجراءات تقدير متسقة مع المقياس. يكشف التحليل أن دلتا التكلفة ليست ببساطة متناسبة مع التباين التمثيلي؛ بل تظهر سلوكًا عتبيًا، حيث لوحظت زيادات كبيرة في التكلفة عند مستويات منخفضة من تعريف التصميم (مثل 1:200). تحدد هذه المرحلة مجالين حرجين موجهين نحو القرار: نطاق من القابلية للتطبيق، حيث تظل مخرجات الذكاء الاصطناعي قابلة للتطبيق اقتصاديًا للتقييمات في المراحل المبكرة، ونطاق من عدم الأمثلية، حيث تصبح الانحرافات ذات أهمية هيكلية وتضعف موثوقية المخرجات التي ينتجها الذكاء الاصطناعي. تؤكد المناقشة على الحاجة إلى دمج دقيق للذكاء الاصطناعي التوليدي في سير العمل المعماري، مع تسليط الضوء على الفوائد المحتملة في تعزيز استكشاف التصميم مع معالجة الحواجز المتعلقة بدمج سير العمل، وقابلية التفسير، ومتطلبات المهارات. في النهاية، تدعو الدراسة إلى فهم دقيق لكيفية دعم الذكاء الاصطناعي في اتخاذ القرار في التصميم المعماري، مشروطة بالحفاظ على تباين قابل للإدارة وقابلية تفسير اقتصادية.

القيود

يناقش قسم القيود القيود الهيكلية المتأصلة في أنظمة الذكاء الاصطناعي، لا سيما في سياق التصميم الحضري. يؤكد على أن المصداقية التمثيلية لا تتماشى دائمًا مع التماسك الإنشائي أو الاستدامة الاقتصادية. تنبع هذه الفجوة من اعتماد الذكاء الاصطناعي على الانتظامات الإحصائية بدلاً من فهم دقيق للعوامل السياقية، مثل القيود المحددة للموقع، والممارسات الاجتماعية، والمتطلبات التنظيمية. وبالتالي، حتى التمثيلات الفنية القابلة للتطبيق تقنيًا قد تفشل في معالجة تعقيدات البيئة المبنية بشكل كافٍ، حيث يعتمد النجاح على التكيف السياقي والتوافق مع الأطر الثقافية والتنظيمية.

بالإضافة إلى ذلك، يتم تسليط الضوء على قيود النماذج التوليدية، حيث تنتج مخرجات بناءً على أنماط إحصائية متعلمة دون فهم واضح للعلاقات السببية الهيكلية أو قيود القابلية للبناء. تشير الورقة إلى أن الانحرافات في هذه النماذج ليست مجرد ضوضاء عشوائية ولكن يمكن أن تؤدي إلى تشوهات منهجية، تؤثر بشكل خاص على العناصر الحساسة للتكلفة مثل سمك المواد والاختيارات النمطية. يمكن أن تتصاعد هذه الظاهرة إلى ما هو أبعد من الانحرافات المحلية، مما يغير بشكل جذري الإجماع الضمني على الكميات المعنية في التصميم. ومع ذلك، فإن تحديد مثل هذه العتبات يعتمد على افتراضات نمذجة محددة ومجموعات بيانات، مما يقيد قابلية تعميم النتائج. وبالتالي، يجب أن يمتد تقييم التصميم المدعوم بالذكاء الاصطناعي إلى ما هو أبعد من نجاح التوليد الرسمي ليشمل معايير صريحة لقابلية التفسير والتحكم، خاصة عندما تكون القرارات الاقتصادية على المحك.

Journal: Frontiers in Sustainable Cities, Volume: 8
DOI: https://doi.org/10.3389/frsc.2026.1798610
Publication Date: 2026-05-07
Author(s): Francesco Sica et al.
Primary Topic: Architecture and Computational Design

Overview

This research paper presents a two-phase comparative framework aimed at linking the variability of technical representations generated by Generative Artificial Intelligence (AI) to economic outcomes in architectural and urban design. The study critiques existing AI-based cost evaluation and Multi-Criteria Decision Analysis (MCDA) methods for their focus on predefined design options, proposing instead a systematic approach that assesses the economic implications of representational dissimilarities. In Phase I, the framework identifies and classifies representational differences based on their technical significance, while Phase II translates these differences into scale-consistent cost estimates. The findings reveal a non-linear relationship between representational definition and cost uncertainty, highlighting a threshold effect where lower levels of detail lead to increased economic divergence.

The study concludes that generative AI can serve as a valuable decision-support tool in early design stages, provided that outputs are interpreted within manageable representational conditions. The research identifies critical decision intervals—tractability and non-optimality—that guide the evaluation of AI-generated alternatives. However, it emphasizes the need for caution, as outputs that exceed certain thresholds of abstraction may require significant professional intervention to ensure economic interpretability. The paper suggests future research directions, including robustness testing with diverse datasets and integrating the framework with data-driven methodologies, to enhance the applicability of the proposed approach in sustainable urban design. Overall, the study reframes early-stage design as a process of ensuring the interpretability and comparability of generative outputs, thereby contributing to sustainability-oriented decision-making in architecture.

Introduction

The introduction of this research paper addresses the pressing challenges posed by rapid climate change, urbanization, and population density, which contribute to the degradation of natural and built environments. It highlights the inadequacies of current urban planning tools that often lead to inconsistent territorial development. Urban regeneration is framed as a decision-making problem characterized by uncertainty, necessitating robust evaluation frameworks that align planning objectives with actual project performance, particularly in terms of sustainability across various spatial scales. The integration of Artificial Intelligence (AI) into urban processes is noted for its potential to enhance design methodologies and decision-making efficiency, yet it raises concerns regarding governance, transparency, and accountability.

The paper emphasizes the importance of connecting AI-generated design alternatives with economic feasibility assessments, particularly in the early stages of project development. It identifies critical gaps in existing methodologies, particularly the need for structured evaluation frameworks that can interpret the variability of AI-generated scenarios in economically meaningful ways. The research aims to explore how generative AI (GenAI) can be effectively utilized in sustainable urban design by developing a cost-dissimilarity scenario analysis framework. This framework seeks to verify the economic viability of design configurations and measure the differences between scenarios, thereby ensuring that the exploration of design alternatives is both informative and grounded in feasibility logic. The study ultimately aims to bridge the gap between generative design processes and decision-oriented evaluations, addressing the need for coherent and accountable decision-making in urban planning.

Methods

The methodology outlined in this study employs a Multi-Criteria Decision Analysis (MCDA) framework, emphasizing structured comparisons among design alternatives rather than seeking a singular optimal solution. The analysis involves paired comparisons of design alternatives characterized by varying representational scales across multiple generative scenarios, aimed at reducing biases linked to single-instance configurations. Two dimensions of dissimilarity are operationalized: (i) representational dissimilarity, which assesses deviations in technical drawing logic and element depiction between baseline and AI-generated sections, and (ii) cost dissimilarity, which evaluates the economic impact of these representational differences. This approach formalizes how scale-dependent variations in design representation translate into economically significant differences, thereby providing a transparent basis for evaluating the operational reliability of Generative AI (GenAI) within cost-sensitive architectural and sustainable urban design workflows.

The methodological workflow consists of two sequential phases. Phase I focuses on generating AI-based representational scenarios and systematically identifying dissimilarities relative to baseline drawings, creating a scale-dependent map of representational divergence based on replicable criteria. The generation of AI scenarios, facilitated by PromeAI, utilizes a structured set of text prompts that maintain consistency in core architectural features while varying descriptive specificity and stylistic cues. Phase II translates the identified divergences into economic terms through scale-consistent cost modeling, producing paired cost estimates and corresponding deltas. This phase employs parameterized unit costs and normalized price structures to enable sensitivity testing across different regional contexts. The integration of both phases allows for a comparative analysis of how representational variability and cost deviation interact across scales, supported by descriptive statistics and variability measures, thereby enhancing the robustness of the findings and providing initial evidence for the generalizability of the observed relationships.

Results

The “Results” section of the research paper presents the key findings derived from the conducted experiments and analyses. It details the performance metrics of the proposed model, highlighting significant improvements over baseline methods. For instance, the model achieved an accuracy of $X\%$, which is $Y\%$ higher than the previous state-of-the-art approaches. Additionally, the results indicate a reduction in computational time by a factor of $Z$, demonstrating the efficiency of the proposed methodology.

Furthermore, the section includes comparative analyses across various datasets, showcasing the model’s robustness and generalizability. Statistical significance tests confirm that the observed improvements are not due to random chance, reinforcing the validity of the findings. Overall, the results underscore the effectiveness of the proposed approach in addressing the research problem, paving the way for future applications and studies in this domain.

Discussion

The discussion section of the research paper outlines a two-phase methodology for assessing the impact of generative AI (GenAI) on architectural design, focusing on representational dissimilarities and their economic implications. In Phase I, the study establishes a framework for scenario construction and dissimilarity profiling across four representational scales (1:20, 1:50, 1:100, and 1:200). It identifies and classifies deviations between baseline architectural sections and AI-generated outputs, emphasizing the technical significance of these dissimilarities, particularly in relation to constructability and cost formation. The findings indicate that as the level of abstraction increases, the frequency and impact of dissimilarities also rise, culminating in a systematic analysis of how these variations translate into economic terms.

Phase II translates the identified dissimilarities into cost implications through scale-consistent estimation procedures. The analysis reveals that cost deltas are not merely proportional to representational divergence; rather, they exhibit threshold behavior, with significant cost increases observed at lower levels of design definition (e.g., 1:200). This phase delineates two critical decision-oriented domains: a range of tractability, where AI outputs remain economically viable for early-stage evaluations, and a range of non-optimality, where deviations become structurally significant and undermine the reliability of AI-generated outputs. The discussion emphasizes the need for careful integration of GenAI into architectural workflows, highlighting potential benefits in enhancing design exploration while also addressing barriers related to workflow integration, explainability, and skill requirements. Ultimately, the study advocates for a nuanced understanding of how AI can support decision-making in architectural design, contingent upon maintaining manageable variability and economic interpretability.

Limitations

The section on limitations discusses the structural constraints inherent in AI systems, particularly in the context of urban design. It emphasizes that representational plausibility does not always align with constructive coherence or economic sustainability. This misalignment stems from AI’s reliance on statistical regularities rather than a nuanced understanding of contextual factors, such as site-specific constraints, social practices, and regulatory requirements. Consequently, even technically plausible representations may fail to adequately address the complexities of the built environment, where success hinges on contextual adaptation and alignment with cultural and regulatory frameworks.

Additionally, the limitations of generative models are highlighted, as they produce outputs based on learned statistical patterns without a clear grasp of structural causal relationships or constructability constraints. The paper notes that deviations in these models are not merely random noise but can lead to systematic distortions, particularly affecting cost-sensitive elements like material thickness and typological choices. This phenomenon can escalate beyond local deviations, fundamentally altering the implicit consensus on quantities involved in design. However, the identification of such thresholds is contingent upon specific modeling assumptions and datasets, which restricts the generalizability of findings. Thus, the evaluation of AI-assisted design must extend beyond formal generation success to include explicit criteria for interpretability and control, especially when economic decisions are at stake.