DOI: https://doi.org/10.1038/s41467-026-72288-w
PMID: https://pubmed.ncbi.nlm.nih.gov/42049730
تاريخ النشر: 2026-04-28
المؤلف: Chengfei Liu وآخرون
الموضوع الرئيسي: طرق تنقية المياه بالطاقة الشمسية
نظرة عامة
تناقش هذه الفقرة التقدم في تقنيات توليد بخار الشمس على الواجهة (SVG)، مع التركيز بشكل خاص على المبخرات القائمة على الهيدروجيل، والتي تُعرف بكفاءتها العالية في تنقية المياه وتحلية المياه. ومع ذلك، غالبًا ما تفشل الهيدروجيل التقليدية تحت الإشعاع العالي بسبب عدم كفاية نقل المياه. لمعالجة هذه القيود، يقدم المؤلفون هيدروجيل بشبكة صلبة ذات كثافة منخفضة للغاية (ULR) مصممة لنقل المياه وتبخرها بسرعة. تعمل هذه الشبكة المبتكرة على تحسين احتباس المياه وتخلق تدرجات ضغط أسموزي حادة، مما يسهل إمداد المياه بسرعة بينما تمنع هيكلها الصلب الانكماش، وبالتالي تحافظ على تدفق الشعيرات الدموية وإنتاج البخار المستمر حتى تحت ظروف الإشعاع الشديد.
تظهر المبخرات ULR تحسنًا كبيرًا مقارنة بالهيدروجيل التقليدية، حيث تحقق معدل تبخر قدره 25.57 كجم م⁻² ساعة⁻¹ عند 10 شموس على مدى 100 ساعة. في التطبيقات العملية، أنتجت وحدة فعالة من حيث التكلفة تستخدم هذه التقنية 138 لتر م⁻² يوم⁻¹، مما أسفر عن 12.42 لتر يوم⁻¹ من المياه الصالحة للشرب. تشير هذه النتائج إلى أن تصميم الهيدروجيل ULR يمثل خطوة كبيرة إلى الأمام في تطوير حلول قوية وميسورة التكلفة لمعالجة تحديات ندرة المياه العالمية.
مقدمة
تسلط المقدمة الضوء على التحدي العالمي الحرج المتمثل في ندرة المياه العذبة، الذي يؤثر على حوالي 4 مليارات شخص ويعيق التقدم نحو الهدف السادس من أهداف التنمية المستدامة (SDG 6). تواجه تقنيات تنقية المياه التقليدية، مثل التقطير الفلاش متعدد المراحل والتناضح العكسي، قيودًا كبيرة بسبب الطلبات العالية على الطاقة والتكاليف، خاصة في المناطق النامية. استجابةً لذلك، ظهرت تقنية توليد بخار الشمس (SVG) باستخدام المواد الفوتوحرارية كطريقة واعدة وفعالة من حيث الطاقة لإنتاج المياه الصالحة للشرب. من بين تقنيات SVG، تُلاحظ المبخرات الشمسية القائمة على الهيدروجيل لكفاءتها العالية في استخدام الطاقة؛ ومع ذلك، فإنها تواجه صعوبات في نقل المياه تحت الإشعاع الشمسي العالي، مما يؤثر على أدائها واستقرارها.
تهدف التقدمات الأخيرة إلى تعزيز نقل المياه في المبخرات القائمة على الهيدروجيل من خلال تحسين الشبكات المسامية وتصميمات القنوات. على الرغم من هذه الجهود، لا يزال تحقيق معدلات نقل المياه الكافية يمثل تحديًا، حيث يتأثر المعدل بمحتوى المياه وتدرج الضغط الأسموزي داخل الهيدروجيل. تقدم هذه الدراسة هيدروجيلات ذات كثافة منخفضة للغاية (ULR) مقاومة للانكماش، والتي تحافظ على ضغط أسموزي مرتفع ومحتوى مائي، مما يسهل نقل المياه وتبخرها بسرعة حتى تحت أشعة الشمس الشديدة. أظهر نظام الهيدروجيل ULR معدل تبخر مائي ملحوظ قدره 25.57 كجم م⁻² ساعة⁻¹ تحت 10 شموس وحقق معدل إنتاج مائي عملي قدره 138 لتر م⁻² يوم⁻¹ في التجارب الميدانية. لا تعزز هذه الطريقة المبتكرة كفاءة المبخرات الشمسية القائمة على الهيدروجيل فحسب، بل تساهم أيضًا بشكل كبير في حلول توليد المياه اللامركزية، مما يحسن من أمن المياه للمجتمعات الضعيفة.
طرق
في هذا القسم، يوضح المؤلفون المواد والمواد الكيميائية المستخدمة في أبحاثهم. تم الحصول على الكيتوزان (CS) بدرجة نزع الأسيتيل 90% ووزن جزيئي متوسط (Mw) قدره 5000 دالتون من شركة Xi’an Realin Biotechnology Co., Ltd، بينما تم الحصول على الصمغ الصوديومي (SA) مع لزوجة قدرها 485 مPa·s من شركة Qingdao Hyzlin Biology Development Co., Ltd. تشمل المواد الكيميائية الإضافية K-كاراجينان (K-C)، البوتاسيوم بيروأنتمونات، حمض البارامينو فينيل أرسونيك، حمض الفيتيك، الأنيلين، والبيرول، جميعها تم الحصول عليها من شركة Aladdin Reagents Co., Ltd. تم الحصول على أنابيب الكربون النانوية التجارية (CNTs) التي تزيد نقاوتها عن 98% من شركة Timesnano Co., Ltd.
علاوة على ذلك، تم الحصول على الأكريلاميد (AM)، N,N’-ميثيلين ثنائي الأكريلاميد (MBAA)، وN,N,N’,N’-ميثيل إيثيلين ديا أمين (TEMED) أيضًا من شركة Aladdin Reagents Co., Ltd، بينما تم توفير بيروكسيد الأمونيوم (APS)، ثنائي كرومات البوتاسيوم، سيلينيت الصوديوم خماسي الماء، كلوريد الصوديوم، والفحم الأسود من شركة Sinopharm Chemical Reagent. تم جمع مياه البحر من البحر الأصفر في تشينغداو، الصين، وتم الحصول على صمغ الزانثان (XG) وخلات الصوديوم كربوكسي ميثيل (CMC-Na) من شركة Deosen Biochemical وشركة Shanghai Ever Bright Enterprise Development Co., Ltd، على التوالي. تم استخدام جميع المواد الكيميائية دون مزيد من التنقية، مما يضمن سلامة الإجراءات التجريبية.
نتائج
يقدم قسم “النتائج” من ورقة البحث النتائج الرئيسية المستمدة من التجارب أو التحليلات التي تم إجراؤها. يوضح نتائج الاختبارات المختلفة، مع تسليط الضوء على البيانات الإحصائية المهمة والاتجاهات الملحوظة في الدراسة. غالبًا ما تكون النتائج مصحوبة بأشكال وجداول توضح العلاقات بين المتغيرات، مما يوفر تمثيلًا بصريًا واضحًا للبيانات.
علاوة على ذلك، يناقش القسم تداعيات هذه النتائج فيما يتعلق بالفرضيات المطروحة في بداية البحث. قد يقارن أيضًا النتائج بالدراسات السابقة، مع التأكيد على أي مساهمات جديدة في هذا المجال. بشكل عام، يخدم هذا القسم في التحقق من أهداف البحث ويقدم رؤى يمكن أن تُفيد التحقيقات أو التطبيقات المستقبلية.
مناقشة
يسلط قسم المناقشة في ورقة البحث الضوء على التقدمات الكبيرة التي تم تحقيقها مع الهيدروجيلات ذات الكثافة المنخفضة للغاية (ULR) في تطبيقات توليد بخار الشمس (SVG). تُظهر الهيدروجيلات ULR، التي تم تصنيعها من خلال طريقة تفاعل انتشار بسيطة تتضمن الصمغ الصوديومي (SA) وأنابيب الكربون النانوية (CNT) على غشاء كيتوزان منخفض الوزن الجزيئي (LMWCS)، معدلات تبخر ملحوظة واستقرار تحت أشعة الشمس عالية الكثافة. على وجه التحديد، تُظهر هيدروجيل ULR-1 معدل تبخر قدره 2.67 كجم م⁻² ساعة⁻¹ تحت شمس واحدة، مما يرتفع إلى حوالي 25.57 كجم م⁻² ساعة⁻¹ تحت 10 شموس، مع الحفاظ على كفاءة تحويل طاقة عالية تبلغ 93.3%. تسهل الهيكل الفريد المسامي للهيدروجيلات وكثافتها الشبكية المحسنة نقل المياه بكفاءة، مما يتفوق بشكل كبير على الهيدروجيلات التقليدية، التي تفشل تحت ظروف مماثلة.
علاوة على ذلك، تم التحقق من الجدوى العملية للمبخرات القائمة على الهيدروجيل ULR من خلال تجارب خارجية، مما أسفر عن معدل إنتاج مائي قدره 138 لتر م⁻² يوم⁻¹ وتحقيق كفاءة جمع قدرها 69%. يقوم النظام بتنقية مياه البحر ومياه الصرف الصحي بفعالية، مما يلبي معايير منظمة الصحة العالمية لمياه الشرب ويظهر تخفيضات كبيرة في تركيزات المعادن الثقيلة. تشير التحليلات الاقتصادية إلى أن النظام يمكن أن يحقق التكافؤ في التكلفة مع المياه المعبأة في حوالي عشرة أيام، مما يجعله حلاً مستدامًا للمناطق التي تعاني من ندرة المياه. تؤكد النتائج على إمكانية استخدام الهيدروجيلات ULR لتعزيز أمن المياه والمساهمة في تحقيق العديد من أهداف التنمية المستدامة (SDGs) من خلال توفير حلول توليد مياه منخفضة الكربون ومتاحة، خاصة في المناطق النامية.
DOI: https://doi.org/10.1038/s41467-026-72288-w
PMID: https://pubmed.ncbi.nlm.nih.gov/42049730
Publication Date: 2026-04-28
Author(s): Chengfei Liu et al.
Primary Topic: Solar-Powered Water Purification Methods
Overview
The section discusses advancements in interfacial solar vapor generation (SVG) technologies, particularly focusing on hydrogel-based evaporators, which are recognized for their high energy efficiency in water purification and desalination. However, traditional hydrogels often fail under high irradiance due to inadequate water transport. To address this limitation, the authors present an ultralow-density rigid-network (ULR) hydrogel designed for rapid water transport and evaporation. This innovative ULR network optimizes water retention and creates steep osmotic-pressure gradients, facilitating swift water supply while its rigid framework prevents shrinkage, thereby maintaining capillary flow and continuous vapor production even under extreme irradiance conditions.
The ULR evaporators demonstrate a significant improvement over conventional hydrogels, achieving an evaporation rate of 25.57 kg m⁻² h⁻¹ at 10 suns over a duration of 100 hours. In practical applications, a cost-effective module utilizing this technology produced 138 L m⁻² day⁻¹, resulting in 12.42 L day⁻¹ of potable water. These findings indicate that the ULR hydrogel design represents a significant step forward in developing robust and affordable solutions to address global water scarcity challenges.
Introduction
The introduction highlights the critical global challenge of freshwater scarcity, affecting approximately 4 billion people and hindering progress toward Sustainable Development Goal 6 (SDG 6). Traditional water purification technologies, such as multi-stage flash distillation and reverse osmosis, face significant limitations due to high energy demands and costs, particularly in underdeveloped regions. In response, solar vapor generation (SVG) utilizing photothermal materials has emerged as a promising, energy-efficient method for producing potable water. Among SVG technologies, hydrogel-based solar evaporators are noted for their high energy efficiency; however, they struggle with water transport limitations under high solar irradiation, which affects their performance and stability.
Recent advancements aim to enhance water transport in hydrogel-based evaporators through improved porous networks and channel designs. Despite these efforts, achieving adequate water transport rates remains a challenge, as the rate is influenced by the water content and osmotic pressure gradient within the hydrogel. This study introduces anti-shrinkage ultralow density (ULR) hydrogels, which maintain high osmotic pressure and water content, facilitating rapid water transport and evaporation even under intense sunlight. The ULR hydrogel system demonstrated a remarkable water evaporation rate of 25.57 kg m⁻² h⁻¹ under 10 suns and achieved a practical water production rate of 138 L m⁻² day⁻¹ in field trials. This innovative approach not only enhances the efficiency of hydrogel-based solar evaporators but also contributes significantly to decentralized water generation solutions, improving water security for vulnerable communities.
Methods
In this section, the authors detail the materials and chemicals utilized in their research. Chitosan (CS) with a 90% degree of deacetylation and a weight-average molecular weight (Mw) of 5000 Da was sourced from Xi’an Realin Biotechnology Co., Ltd., while sodium alginate (SA) with a viscosity of 485 mPa·s was obtained from Qingdao Hyzlin Biology Development Co., Ltd. Additional reagents included K-carrageenan (K-C), potassium pyroantimonate, p-aminophenylarsonic acid, phytic acid, aniline, and pyrrole, all procured from Aladdin Reagents Co., Ltd. Commercial carbon nanotubes (CNTs) with a purity exceeding 98% were acquired from Timesnano Co., Ltd.
Furthermore, acrylamide (AM), N,N’-methylenebisacrylamide (MBAA), and N,N,N’,N’-methylethylenediamine (TEMED) were also sourced from Aladdin Reagents Co., Ltd., while ammonium peroxodisulfate (APS), potassium dichromate, sodium selenite pentahydrate, sodium chloride, and carbon black were supplied by Sinopharm Chemical Reagent. Seawater was collected from the Yellow Sea in Qingdao, China, and xanthan gum (XG) and sodium carboxymethyl cellulose (CMC-Na) were obtained from Deosen Biochemical and Shanghai Ever Bright Enterprise Development Co., Ltd., respectively. All chemicals were utilized without further purification, ensuring the integrity of the experimental procedures.
Results
The “Results” section of the research paper presents key findings derived from the conducted experiments or analyses. It details the outcomes of various tests, highlighting significant statistical data and trends observed in the study. The results are often accompanied by figures and tables that illustrate the relationships between variables, providing a clear visual representation of the data.
Moreover, the section discusses the implications of these findings in relation to the hypotheses posed at the outset of the research. It may also compare the results with previous studies, emphasizing any novel contributions to the field. Overall, this section serves to validate the research objectives and offers insights that could inform future investigations or applications.
Discussion
The discussion section of the research paper highlights the significant advancements achieved with ultralow-density (ULR) hydrogels in solar vapor generation (SVG) applications. The ULR hydrogels, synthesized through a straightforward reaction-diffusion method involving sodium alginate (SA) and carbon nanotubes (CNT) on a low-molecular-weight chitosan (LMWCS) membrane, exhibit remarkable evaporation rates and stability under high-intensity sunlight. Specifically, the ULR-1 hydrogel demonstrates an evaporation rate of 2.67 kg m⁻² h⁻¹ under one sun, escalating to approximately 25.57 kg m⁻² h⁻¹ under 10 suns, while maintaining a high energy conversion efficiency of 93.3%. The hydrogels’ unique porous structure and optimized network density facilitate efficient water transport, significantly outperforming conventional hydrogels, which fail under similar conditions.
Moreover, the practical viability of the ULR hydrogel-based evaporators was validated through outdoor experiments, yielding a water production rate of 138 L m⁻² day⁻¹ and achieving a collection efficiency of 69%. The system effectively purifies seawater and wastewater, meeting WHO standards for drinking water and demonstrating significant reductions in heavy metal concentrations. The economic analysis indicates that the system could achieve cost parity with bottled water in approximately ten days, making it a sustainable solution for water-scarce regions. The findings underscore the potential of ULR hydrogels to enhance water security and contribute to multiple Sustainable Development Goals (SDGs) by providing accessible, low-carbon water generation solutions, particularly in underdeveloped areas.
