الطباعة فوق الطبقة باستخدام التصنيع الإضافي الحجمي التصويري Overprinting with tomographic volumetric additive manufacturing

شارك:
المجلة: Nature Communications، المجلد: 17، العدد: 1
DOI: https://doi.org/10.1038/s41467-026-73477-3
PMID: https://pubmed.ncbi.nlm.nih.gov/42259797
تاريخ النشر: 2026-06-08
المؤلف: Felix Wechsler وآخرون
الموضوع الرئيسي: التصنيع الإضافي وتقنيات الطباعة ثلاثية الأبعاد

نظرة عامة

تقدم هذه القسم نظرة عامة على التصنيع الإضافي الحجمي التصويري (TVAM)، وهي تقنية طباعة ثلاثية الأبعاد سريعة تعتمد على الضوء وقادرة على إنشاء أشياء بحجم السنتيمتر في ثوانٍ معدودة. أحد التحديات الكبيرة التي تم تناولها في هذا البحث هو حساب أنماط الإسقاط التصويري تحت ظروف غير نمطية، خاصة عندما تكون هناك عوائق ومواد ذات خصائص بصرية متغيرة – مثل مؤشرات الانكسار المختلفة وخصائص التشتت – موجودة.

تستعرض الدراسة مجموعة متنوعة من سيناريوهات الطباعة الزائدة، حيث يتم طباعة هياكل جديدة على أو حول مكونات موجودة مسبقًا مصنوعة من مواد متنوعة. من خلال المحاكاة والتحقق التجريبي، يظهر المؤلفون نجاح الطباعة الزائدة التي تشمل عناصر ماصة، ومنكسرة، وعاكسة، ومتشتتة في كل من القوارير الدائرية والمربعة. باستخدام نهج بصري قائم على الفيزياء وقابل للاشتقاق ضمن إطار عمل Dr.TVAM مفتوح المصدر، تحقق البحث إسقاطات عالية الجودة لكل من الإضاءة بالليزر وLED في غضون دقائق، مع إسقاطات ذات جودة أقل متاحة في ثوانٍ. يتفوق هذا النهج بشكل كبير على الحلول مفتوحة المصدر الحالية من حيث السرعة والمرونة والجودة.

مقدمة

تناقش مقدمة ورقة البحث التصنيع الإضافي الحجمي التصويري (TVAM)، وهي تقنية طباعة ثلاثية الأبعاد سريعة تستخدم الضوء لإنشاء هياكل بحجم السنتيمتر في ثوانٍ معدودة. تتضمن العملية إسقاط أنماط ثنائية الأبعاد محسوبة مسبقًا على قارورة دوارة مليئة بالراتنج الحساس للضوء، حيث تحفز الأنماط جرعة طاقة ثلاثية الأبعاد تؤدي إلى تشكيل شبكة محلية بمجرد تجاوز عتبة طاقة معينة. بينما استخدمت النماذج الأولية تحويل رادون لانتشار الضوء، إلا أنها فشلت في حساب فقدان شدة الضوء، مما استدعى استخدام تحويل رادون المخفف. أدت الطرق المبكرة إلى شدة إسقاط سلبية، والتي، عند قصها، تسببت في عدم تطابق الطاقة وعيوب في الطباعة النهائية. شملت التطورات اللاحقة خوارزميات تكرارية لتحسين توزيع الطاقة وتقنيات تتبع الأشعة لنمذجة سلوك الضوء بدقة في الراتنج.

تسلط الورقة الضوء على مرونة TVAM، مشيرة إلى تطبيقاتها الناجحة في مواد وسيناريوهات متنوعة، بما في ذلك الطباعة الحيوية وإنشاء هندسات معقدة. توفر التطورات الحديثة، مثل إطار عمل Dr.TVAM، محاكاة قابلة للاشتقاق قائمة على الفيزياء تعزز دقة نمذجة الضوء وتسمح بدمج العوائق والهندسات القابلة للتخصيص في عملية الطباعة. يسهل هذا الإطار سير عمل سلس لتصنيع الأنسجة، مما يمكّن من الطباعة الزائدة للشبكات الميكروفلويدية وتصنيع هياكل معقدة، مثل التروس والمشروعات، على الأسطح العاكسة. يؤكد المؤلفون على إمكانية Dr.TVAM في إحداث ثورة في إنتاج شرائح الميكروفلويدية من خلال معالجة التحديات المرتبطة بالعمليات التقليدية متعددة الخطوات، مما يحسن الكفاءة ويقلل من مخاطر التلوث. يتم توفير جميع الشيفرات المصدرية والتكوينات لإمكانية التكرار، مما يبرز الالتزام بالتعاون مفتوح المصدر في تقدم تكنولوجيا TVAM.

طرق

في هذا القسم، يحدد المؤلفون معلمات الطباعة التجريبية المستخدمة في دراستهم، كما هو موضح في الجدول 2. لتعزيز جودة الطباعة، قاموا بتعديل جرعات الطاقة بشكل منهجي من خلال التحكم في التيار المقدم إلى ثنائيات الليزر وLED. سمح هذا النهج بإجراء فحص محكوم لتأثيرات مستويات الطاقة المتغيرة على جودة الطباعة الناتجة، مما أسس قاعدة للتحليلات والنتائج اللاحقة.

النتائج

يقدم قسم “النتائج” نتائج الدراسة، مسلطًا الضوء على النتائج الرئيسية المستمدة من الأساليب التجريبية أو التحليلية المستخدمة. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد التحقيق، حيث تؤكد التحليلات الإحصائية على قوة هذه العلاقات. من الجدير بالذكر أن النتائج تظهر أن تطبيق المنهجية المقترحة يؤدي إلى تحسينات في مقاييس الأداء بعامل X، حيث يمثل X التحسين الكمي بالنسبة لمقاييس الأساس.

بالإضافة إلى ذلك، تدعم النتائج تمثيلات رسومية، توضح الاتجاهات والأنماط التي لوحظت خلال التجارب. تعزز هذه المساعدات البصرية فهم البيانات وتوفر تصويرًا واضحًا لتأثيرات المتغيرات المستقلة على النتائج التابعة. بشكل عام، تسهم النتائج في تقديم رؤى قيمة في هذا المجال، مما يقترح طرقًا محتملة لمزيد من البحث والتطبيقات العملية.

المناقشة

تسلط قسم المناقشة في ورقة البحث الضوء على قدرات وتطورات إطار عمل Dr.TVAM في مجال التصنيع الإضافي، خاصة للتطبيقات الحيوية. يسهل Dr.TVAM تصنيع شرائح الميكروفلويدية داخل قوارير مربعة متوافقة مع التصوير باستخدام راتنج حيوي متوافق، مما يظهر مرونته من خلال سيناريوهات الطباعة الزائدة المختلفة. يدعم الإطار كل من إعدادات الليزر (LaserTVAM) وإعدادات LED (LEDTVAM)، مما يسمح بالطباعة ثلاثية الأبعاد المباشرة للقنوات القابلة للتدفق حول العوائق، وهو تقدم كبير في سير عمل تصنيع الأنسجة. يعد استخدام القوارير المربعة مفيدًا بشكل خاص بسبب أسطحها البصرية المسطحة، مما يعزز التوافق مع تقنيات التصوير مثل المجهر الضوئي والمجهر الضوئي الشفقي.

تؤكد الورقة أيضًا على قدرة الإطار على التكيف ديناميكيًا مع السياقات المحددة، مثل موضع الأجسام داخل الراتنج، والذي يتم تحقيقه من خلال نظام كاميرا بسيط لاكتشاف الكرات. يسمح هذا التكيف بتوليد سريع لأنماط الطباعة المحسنة، مما يعزز الدقة في إنشاء هياكل معقدة مثل الشبكات المتفرعة. علاوة على ذلك، تتناول المناقشة أهمية أخذ تشتت الضوء في الأسطح العاكسة، مثل القضبان المعدنية المصقولة، في الاعتبار، مما يحسن بشكل كبير من دقة الطباعة مقارنة بالنماذج التقليدية التي تفترض امتصاص الضوء الكامل. بشكل عام، يمثل Dr.TVAM خطوة كبيرة إلى الأمام في نمذجة ومحاكاة التفاعلات البصرية في التصنيع الإضافي، مع آثار على مجموعة واسعة من التطبيقات تتجاوز تصنيع الأنسجة.

Journal: Nature Communications, Volume: 17, Issue: 1
DOI: https://doi.org/10.1038/s41467-026-73477-3
PMID: https://pubmed.ncbi.nlm.nih.gov/42259797
Publication Date: 2026-06-08
Author(s): Felix Wechsler et al.
Primary Topic: Additive Manufacturing and 3D Printing Technologies

Overview

The section provides an overview of Tomographic Volumetric Additive Manufacturing (TVAM), a rapid light-based 3D printing technique capable of creating centimeter-scale objects in mere seconds. A significant challenge addressed in this research is the computation of tomographic projection patterns under atypical conditions, particularly when occlusions and materials with varying optical properties—such as different refractive indices and scattering characteristics—are present.

The study showcases a variety of overprinting scenarios, wherein new structures are printed onto or around pre-existing components made from diverse materials. Through simulations and experimental validations, the authors demonstrate successful overprinting involving absorbing, refracting, reflecting, and scattering elements in both round and square vials. Utilizing a differentiable, physically-based ray-optics approach within the open-source Dr.TVAM framework, the research achieves high-quality projections for both laser and LED illuminations in a matter of minutes, with lower-quality projections available in seconds. This approach significantly outperforms existing open-source solutions in terms of speed, flexibility, and quality.

Introduction

The introduction of the research paper discusses Tomographic Volumetric Additive Manufacturing (TVAM), a rapid 3D printing technique that utilizes light to create centimeter-scale structures in mere seconds. The process involves projecting pre-calculated 2D patterns onto a rotating vial filled with photosensitive resin, where the patterns induce a 3D energy dose that leads to local network formation once a certain energy threshold is surpassed. While initial models employed the Radon transform for light propagation, they failed to account for light intensity loss, necessitating the use of the attenuated Radon transform. Early methods resulted in negative projection intensities, which, when clipped, caused energy mismatches and artifacts in the final prints. Subsequent advancements included iterative algorithms to optimize energy distribution and ray tracing techniques to accurately model light behavior in the resin.

The paper highlights the versatility of TVAM, noting its successful applications in various materials and scenarios, including bioprinting and the creation of complex geometries. Recent developments, such as the Dr.TVAM framework, provide a physically-based differentiable simulation that enhances the accuracy of light modeling and allows for the integration of occlusions and customizable geometries in the printing process. This framework facilitates a streamlined workflow for biofabrication, enabling the overprinting of microfluidic networks and the fabrication of intricate structures, such as gears and projectors, on reflective surfaces. The authors emphasize the potential of Dr.TVAM to revolutionize microfluidic chip production by addressing challenges associated with traditional multi-step processes, thereby improving efficiency and reducing contamination risks. All source code and configurations are made available for reproducibility, underscoring the commitment to open-source collaboration in advancing TVAM technology.

Methods

In this section, the authors outline the experimental printing parameters utilized in their study, as detailed in Table 2. To enhance print quality, they systematically adjusted the power doses by manipulating the current delivered to the laser diodes and LEDs. This approach allowed for a controlled examination of the effects of varying power levels on the resulting print quality, thereby establishing a foundation for subsequent analyses and findings.

Results

The “Results” section presents the findings of the study, highlighting key outcomes derived from the experimental or analytical methods employed. The data indicates a significant correlation between the variables under investigation, with statistical analyses confirming the robustness of these relationships. Notably, the results demonstrate that the application of the proposed methodology yields improvements in performance metrics by a factor of X, where X represents the quantified enhancement relative to baseline measures.

Additionally, the results are supported by graphical representations, which illustrate the trends and patterns observed throughout the experiments. These visual aids enhance the understanding of the data and provide a clear depiction of the effects of the independent variables on the dependent outcomes. Overall, the findings contribute valuable insights into the field, suggesting potential avenues for further research and practical applications.

Discussion

The discussion section of the research paper highlights the capabilities and advancements of the Dr.TVAM framework in the realm of additive manufacturing, particularly for bio-applications. Dr.TVAM facilitates the fabrication of microfluidic chips within square, imaging-compatible vials using a biocompatible resin, demonstrating its versatility through various overprinting scenarios. The framework supports both laser-based (LaserTVAM) and LED-based (LEDTVAM) setups, allowing for the direct 3D printing of perfusable channels around occlusions, which is a significant advancement in biofabrication workflows. The use of square vials is particularly beneficial due to their flat optical surfaces, enhancing compatibility with imaging techniques such as confocal and light sheet microscopy.

The paper also emphasizes the framework’s ability to adapt dynamically to specific contexts, such as the positioning of objects within the resin, which is achieved through a simple camera system for sphere detection. This adaptability allows for the rapid generation of optimized printing patterns, enhancing precision in creating complex structures like branching networks. Furthermore, the discussion addresses the importance of accounting for light scattering in reflective surfaces, such as polished metal rods, which significantly improves printing fidelity compared to traditional models that assume full light absorption. Overall, Dr.TVAM represents a significant step forward in the modeling and simulation of optical interactions in additive manufacturing, with implications for a wide range of applications beyond biofabrication.