القبض، الإفراج، التكرار: التقاط البروتين القابل للعكس في الحقول الكهربائية باستخدام فرش بوليمر مضادة للتلوث Catch, Release, Repeat: Reversible Protein Capture in Electric Fields Using Antifouling Polymer Brushes

شارك:
المجلة: Advanced Materials Interfaces، المجلد: 13، العدد: 9
DOI: https://doi.org/10.1002/admi.202501028
تاريخ النشر: 2026-03-18
المؤلف: Erik J. Postma وآخرون
الموضوع الرئيسي: دراسات تفاعل سطح البوليمر

نظرة عامة

في هذه الدراسة، نقدم طريقة جديدة للإعلانات القابلة للعكس وإطلاق البروتينات على الأقطاب المستقرة، مستفيدين من الطبيعة الأمفيبيلية للبروتينات. من خلال تطبيق إمكانيات سلبية، يتم جذب البروتينات المشحونة إيجابياً إلى القطب، بينما يتم طرد البروتينات المشحونة سلبياً. عند جهد الدائرة المفتوحة، يسهل بوليمر مضاد للتلوث إطلاق البروتينات المحتجزة بسرعة. نوضح هذه التقنية باستخدام الليزوزيم على أقطاب ذهبية مغطاة بفرش بولي(أوليجو[إيثيلين غليكول] ميثيل إيثر ميثاكريلات)، مما يظهر القدرة على التحكم في التقاط البروتينات وإطلاقها من خلال تعديلات في الجهد الكهربائي، وسمك الفرش، وتركيز الملح.

تشير نتائجنا إلى أنه يمكننا التقاط طبقة ثنائية من الليزوزيم بشكل قابل للعكس عن طريق تبديل الجهد بين -0.8 فولت وجهد الدائرة المفتوحة على فرش بسمك 15.0 نانومتر. يتميز نظامنا بالصلابة بسمك فرش يصل إلى 50.6 ± 1.5 نانومتر، مع إجراء توصيف مورفولوجي شامل من خلال قياسات زاوية الاتصال، والميكروسكوب الذري (AFM)، وطيف الإلكترون السيني (XPS)، والاليبسومتر. تتناسب كمية البروتين المحتجز بشكل خطي مع الجهد المطبق وعكسياً مع سمك الفرش، بينما يؤثر إضافة كلوريد الصوديوم على التقاط البروتين وفقاً لنموذج غوي-تشابمان. تقدم القدرة السريعة على التبديل والانتعاش الكامل لهذه الطريقة تداعيات كبيرة لتحسين عمليات فصل البروتين في إنتاج الغذاء وتطبيقات التكنولوجيا الحيوية.

مقدمة

تناقش مقدمة ورقة البحث تعقيدات التصاق البروتينات وإطلاقها على الأسطح الصلبة، مع التأكيد على الطبيعة الأمفيبيلية للبروتينات التي تسهل تفاعلها مع أسطح مختلفة. بينما تم دراسة التصاق البروتينات بشكل مكثف، لا تزال الآليات وقابلية تكرار إطلاق البروتينات أقل فهمًا. غالبًا ما تؤدي التفاعلات القوية بين البروتينات والأسطح إلى تحديات مثل الاسترداد غير الكامل والتغير، مما يمكن أن يؤدي إلى تلوث يعوق الأجهزة الميكروفلويدية ويحد من إمكانية إعادة استخدام الأسطح. ظهرت الطلاءات البوليمرية، وخاصة فرش البوليمر، كحلول فعالة لتنظيم ارتباط البروتين، مما يسمح بتفاعلات قابلة للتعديل يمكن أن تعزز التطبيقات في استشعار البيولوجيا، وتقنيات الفصل، والطب الحيوي.

تسلط الورقة الضوء على إمكانيات فرش البوليمر، التي تتكون من سلاسل بوليمر مرتبطة بالأسطح، لتعديل التصاق البروتين من خلال تعديلات في خصائصها الفيزيائية والكيميائية. تم استكشاف استراتيجيات مختلفة للتحكم في تفاعلات البروتين مع هذه الفرش، بما في ذلك التغييرات في الرقم الهيدروجيني، ودرجة الحرارة، وظروف المذيب. ومع ذلك، غالبًا ما تتطلب هذه الطرق تعديلات كبيرة على البيئة، مما يمكن أن يضر بوظيفة البروتين. تستخدم طريقة جديدة قدمها ديل كاستيلو وآخرون إمكانيات خارجية وإضافات نشطة كيميائيًا لتبديل تفاعلات البروتين دون تغيير المحلول بالكامل. يقترح المؤلفون تقنية جديدة تلتقط وتطلق البروتينات عن طريق تطبيق إمكانيات كهربائية مباشرة على الأقطاب، متجاوزين مشكلة الالتصاق غير القابل للعكس من خلال دمج فرش مضادة للتلوث. توضح الدراسة فعالية هذه الطريقة باستخدام فرش بولي(أوليجو(إيثيلين غليكول) ميثيل إيثر ميثاكريلات) على الركائز المطلية بالذهب، مما يظهر خصائصها المضادة للتلوث وقدرتها على التقاط وإطلاق الليزوزيم بشكل محدد من خلال إمكانيات كهربائية محكومة.

النتائج

تشير النتائج إلى أن التقاط البروتين وإطلاقه على الأسطح الذهبية العارية معوق بسبب الالتصاق غير القابل للعكس، كما يتضح من غياب الامتصاص القابل للعكس على أجهزة الاستشعار التي تفتقر إلى فرش بوليمر مضاد للتلوث. قامت الدراسة بتحديد كتلة تلوث الليزوزيم المائي على الذهب عند الرقم الهيدروجيني المحايد، حيث تم قياس 165 ± 32 نانوغرام⋅سم$^{-2}$ من الماء النقي. في المحاليل المالحة، يمكن أن يصل التلوث إلى 467 نانوغرام⋅سم$^{-2}$ بسبب تأثير الحماية للأملاح على شحنات الليزوزيم. كانت المحاولات لإزالة الليزوزيم عن طريق الشطف بالماء أو تطبيق جهد إيجابي غير فعالة، مما أدى إلى مزيد من التلوث المحتمل الناتج عن تغير بنية البروتين الثانوية.

لمعالجة هذه التحديات، قام الباحثون بتوظيف أقطاب ذهبية مع فرش بوليمرية مستقرة مضادة للتلوث من بوليمر (ميثوكسي إيثيل أكريلات) (poly(MeOEGMA))، والتي من المتوقع أن تخفف من الالتصاق غير القابل للعكس وتعزز قابلية عكس تفاعلات البروتين على أسطح أجهزة الاستشعار.

المناقشة

في هذا القسم، يناقش المؤلفون تطوير وتوصيف فرش بوليمر مصممة لالتقاط البروتينات كهربائياً، باستخدام نهج ربط قائم على الديازونيوم. تم تصنيع فرش البوليمر، المكونة من مونومر محايد كبير poly(MeOEGMA)، عبر بلمرة الراديكالات المنقولة بالسطح (SI-ATRP) من طبقة ربط مشتقة من الديازونيوم. أظهرت هذه الطريقة استقرارًا معززًا تحت الظروف الكهروكيميائية مقارنةً بالروابط التقليدية القائمة على الثيول. أظهرت فرش البوليمر الناتجة سمكًا جافًا يبلغ حوالي 20 نانومتر، وهو مثالي لخصائص مضادة للتلوث، وتم توصيفها باستخدام الميكروسكوب الذري (AFM) وطيف الإلكترون السيني (XPS)، مما يؤكد سطحًا ناعمًا وتكوينًا كيميائيًا ناجحًا.

تم تقييم الأداء الكهروكيميائي لفرش البوليمر من خلال التقاط وإطلاق الليزوزيم، وهو بروتين نموذجي مشحون إيجابياً. أشارت النتائج إلى أن التقاط البروتين تأثر بشكل كبير بالجهد الكهربائي المطبق، حيث أدت الجهود الأعلى إلى زيادة معدلات الامتصاص والإطلاق. لاحظ المؤلفون أن فرش البوليمر التقطت بشكل فعال 1117.4 ± 15.6 نانوغرام/سم² من الليزوزيم عند -0.8 فولت، مما يظهر انتقائية النظام المعتمدة على الشحن، حيث لم يتم التقاط البروتينات المشحونة سلبياً مثل α-lactalbumin تحت ظروف مماثلة. بالإضافة إلى ذلك، أظهر وجود كلوريد الصوديوم تأثيرًا سلبيًا على التقاط البروتين، مع انخفاض ملحوظ في الامتصاص مع زيادة تركيز الملح، والذي يُعزى إلى كل من التغيرات الهيكلية في فرش البوليمر وتأثيرات الحماية للشحن. بشكل عام، تسلط هذه الدراسة الضوء على إمكانيات فرش البوليمر المدفوعة كهربائيًا لالتقاط البروتينات بشكل انتقائي وإطلاقها، مع تداعيات لتطبيقات الاستشعار البيولوجي والفصل.

Journal: Advanced Materials Interfaces, Volume: 13, Issue: 9
DOI: https://doi.org/10.1002/admi.202501028
Publication Date: 2026-03-18
Author(s): Erik J. Postma et al.
Primary Topic: Polymer Surface Interaction Studies

Overview

In this study, we present a novel method for the reversible adsorption and release of proteins on stabilized electrodes, leveraging the amphiphilic nature of proteins. By applying negative potentials, positively charged proteins are attracted to the electrode, while negatively charged proteins are repelled. At the open circuit potential, an antifouling polymer-brush facilitates the prompt release of the captured proteins. We demonstrate this technique using lysozyme on gold electrodes coated with poly(oligo[ethylene glycol] methyl ether methacrylate) brushes, showcasing the ability to control protein capture and release through adjustments in electric potential, polymer-brush thickness, and salt concentration.

Our findings indicate that we can reversibly capture a bilayer of lysozyme by switching the potential between -0.8 V and the open circuit potential over a 15.0 nm brush. The system’s robustness is characterized by a brush thickness of up to 50.6 ± 1.5 nm, with extensive morphological characterization performed through contact angle measurements, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and ellipsometry. The amount of captured protein scales linearly with the applied potential and inversely with brush thickness, while the addition of sodium chloride influences protein capture in accordance with the Gouy-Chapman model. This method’s rapid switching capability and complete recovery present significant implications for enhancing protein separation processes in food production and biotechnology applications.

Introduction

The introduction of the research paper discusses the complexities of protein adhesion and release on solid surfaces, emphasizing the amphiphilic nature of proteins that facilitates their interaction with various surfaces. While protein adhesion has been extensively studied, the mechanisms and repeatability of protein release remain less understood. Strong interactions between proteins and surfaces often lead to challenges such as incomplete recovery and denaturation, which can result in fouling that obstructs microfluidic devices and limits the reusability of surfaces. Polymer coatings, particularly polymer brushes, have emerged as effective solutions to regulate protein binding, allowing for tunable interactions that can enhance applications in biosensing, separation technologies, and biomedicine.

The paper highlights the potential of polymer brushes, which consist of polymer chains tethered to surfaces, to modulate protein adhesion through adjustments in their physicochemical properties. Various strategies have been explored to control protein interactions with these brushes, including changes in pH, temperature, and solvent conditions. However, these methods often require significant modifications to the environment, which can compromise protein functionality. A novel approach introduced by del Castillo et al. utilizes external potentials and redox-active additives to switch protein interactions without altering the entire solution. The authors propose a new technique that captures and releases proteins by applying electric potentials directly to electrodes, overcoming the issue of irreversible adhesion by incorporating antifouling brushes. The study demonstrates the effectiveness of this method using poly(oligo(ethylene glycol) methyl ether methacrylate) brushes on gold-coated substrates, showcasing their antifouling properties and the ability to specifically capture and release lysozyme through controlled electric potentials.

Results

The results indicate that protein capture and release on bare gold surfaces is hindered by irreversible adhesion, as evidenced by the absence of reversible adsorption on sensors lacking an antifouling polymer-brush. The study quantified the mass of hydrated lysozyme fouling on gold at neutral pH, measuring 165 ± 32 ng⋅cm$^{-2}$ from pure water. In saline solutions, fouling can reach up to 467 ng⋅cm$^{-2}$ due to the shielding effect of salts on lysozyme charges. Attempts to desorb lysozyme by rinsing with water or applying a positive potential were ineffective, leading to further fouling likely caused by denaturation of the protein’s secondary structure.

To address these challenges, the researchers functionalized gold electrodes with a stable antifouling poly(methoxyethyl acrylate) (poly(MeOEGMA)) brush, which is expected to mitigate irreversible adhesion and enhance the reversibility of protein interactions on the sensor surfaces.

Discussion

In this section, the authors discuss the development and characterization of a polymer brush designed for the electrochemical capture of proteins, specifically using a diazonium-based anchoring approach. The polymer brush, composed of a large neutral monomer poly(MeOEGMA), was synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) from a diazonium-derived anchor layer. This method demonstrated enhanced stability under electrochemical conditions compared to traditional thiol-based anchors. The resulting polymer brushes exhibited a dry thickness of approximately 20 nm, which is optimal for antifouling properties, and were characterized using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), confirming a smooth surface and the successful formation of the desired chemical composition.

The electrochemical performance of the polymer brush was evaluated through the capture and release of lysozyme, a positively charged model protein. The results indicated that protein capture was significantly influenced by the applied electric potential, with higher potentials leading to increased adsorption and desorption rates. The authors observed that the polymer brush effectively captured 1117.4 ± 15.6 ng/cm² of lysozyme at -0.8 V, demonstrating the system’s charge-based selectivity, as negatively charged proteins like α-lactalbumin were not captured under similar conditions. Additionally, the presence of sodium chloride was shown to negatively impact protein capture, with a notable decrease in adsorption as salt concentration increased, attributed to both structural changes in the polymer brush and charge shielding effects. Overall, this study highlights the potential of electrochemically driven polymer brushes for selective protein capture and release, with implications for biosensing and separation applications.