DOI: https://doi.org/10.31577/congeo.2026.56.1.4
تاريخ النشر: 2026-03-26
المؤلف: Jozef Bódi وآخرون
الموضوع الرئيسي: طرق الجيوفيزياء والجيوكهربائية
نظرة عامة
يتناول قسم ورقة البحث تطبيق الميكروغرافي في الكشف عن الفراغات تحت السطح، وخاصة في سياق الاستكشاف الأثري، واستكشاف الكهوف الكارستية، وتخفيف مخاطر الحفر في مناطق التعدين الضحلة. تقيّم الدراسة بشكل خاص طريقة عكس النمو ثلاثية الأبعاد لتحليل بيانات الميكروغرافي عالية الدقة لتحديد الفراغات الضحلة التي قد تسهم في تشكيل الحفر أو هبوط السطح. يؤكد المؤلفون على أهمية ضبط معلمات العكس لتحسين الكشف عن الفراغات، وخاصة بالنسبة للأنفاق التعدينية الطويلة والضيقة في المناطق المتأثرة بتعدين الفحم البني المهجور.
تسلط النتائج من دراسة حالة Čáry الضوء على فعالية تقنية عكس النمو في الاستكشاف الميكروغرافي لتقييم مخاطر الحفر. من خلال إعادة تحليل مجموعة بيانات الجاذبية من Čáry، حدد الباحثون تهديدًا محتملاً للحفر مرتبطًا بممرات الوصول إلى التعدين واكتشفوا جسمًا أعمق غير مفسر ذو تباين كثافة سلبية مرتبط بانخفاض الجاذبية في المنطقة الشمالية الغربية من منطقة الدراسة. تتطلب هذه الشذوذ مزيدًا من التحقيق من خلال طرق جيوفيزيائية إضافية لتأكيد طبيعتها وآثارها.
مقدمة
في هذه الدراسة، نحقق في الكشف الميكروغرافي عن الفراغات القريبة من السطح التي تشكل مخاطر على سلامة الإنسان والبنية التحتية، باستخدام نهج عكس النمو. يعتمد التحليل على الشذوذ الكامل المتبقي لبوجير (RBA)، والذي يكشف عادةً عن إشارات في نطاق عدة إلى عشرات الميكروغالات (µGal). نظرًا للغموض الكامن في الحلول الجاذبية، حيث يمكن أن تناسب نماذج متعددة البيانات الملاحظة، فإن تحديد الحل الأكثر احتمالًا يتطلب دمج القيود من طرق جيوفيزيائية أخرى أو رؤى جيولوجية. تعتبر بيانات الميكروغرافي عالية الدقة والدقيقة ضرورية للكشف الفعال عن الفراغات الضحلة، حيث يمكن أن تنتشر ضوضاء البيانات إلى عدم اليقين في النموذج.
تقسم طريقة عكس النمو تحت السطح إلى عناصر ذات هندسة ثابتة، وتحديدًا منشآت مستطيلة قائمة، وتعدل بشكل تكراري تباينات الكثافة لهذه الخلايا لبناء أجسام مصدر نموذجية. تم التحقق من هذه المنهجية سابقًا من خلال دراسات حالة في الاستكشاف الأثري وكشف مخاطر الحفر، مما يوضح فعاليتها المحتملة. سلطت تقييمات إضافية من خلال ثلاث دراسات حالة أخرى الضوء على كل من مزايا وقيود نهج عكس النمو في تفسير الفراغات الضحلة. تستمر هذه الورقة في هذا الاستكشاف من خلال تقديم دراسة حالة تركز على تحديد الفراغات الضحلة المرتبطة بمخاطر الحفر المرتبطة بتعدين الفحم المهجور في Čáry، الواقعة في الجزء السلوفاكي من حوض فيينا.
نقاش
يتناول قسم النقاش في الورقة تطبيق منهجية عكس النمو في الميكروغرافي ثلاثي الأبعاد، مع التركيز بشكل خاص على استخدامها في تحديد الفراغات تحت السطح والهياكل الجيولوجية في سياق دراسة حالة في منجم Čáry في سلوفاكيا. يشير المؤلفون إلى تطبيقات مختلفة لعكس النمو، وهي GROWTH-dg للحلول المتجانسة وGROWTH-23 للحلول غير المتجانسة، مع تسليط الضوء على أهمية عامل التوازن ($\lambda$) في التحكم في تعقيد النموذج ومدى توافقه مع بيانات الجاذبية. تتضمن عملية التعديل التكراري ملء مجال حجمي بتباينات كثافة محددة مسبقًا، حيث يؤثر اختيار $\lambda$ بشكل كبير على خصائص النموذج، مثل الإفراط في التوافق أو الإفراط في التنظيم.
في دراسة الحالة، كشفت المسوحات الميكروغرافية عن حفر متكررة مرتبطة بممرات التعدين المهجورة. استخدم المؤلفون كل من GROWTH-dg وGROWTH-23 لاستكشاف وجود الفراغات والميزات الجيولوجية، مع تعديل معلمات مثل تباين الكثافة و$\lambda$ لتحسين نماذجهم. أشارت النتائج إلى وجود فراغات صغيرة متراصة مع ممرات التعدين وجسم مصدر أعمق، تم تسميته “A”، والذي لم يمكن تفسيره بشكل قاطع كمساحة فراغ. تشير النتائج إلى وجود مخاطر حفر مستمرة في المنطقة، خاصة بالقرب من الممر 1، وتؤكد على الحاجة إلى مزيد من الاستكشاف الجيوفيزيائي للتحقق من طبيعة ومدى الهياكل المحددة. يبرز النقاش تعقيد تفسير بيانات الجاذبية وضرورة القيود الخارجية لتعزيز موثوقية النموذج.
DOI: https://doi.org/10.31577/congeo.2026.56.1.4
Publication Date: 2026-03-26
Author(s): Jozef Bódi et al.
Primary Topic: Geophysical and Geoelectrical Methods
Overview
The research paper section discusses the application of microgravimetry in detecting subsurface cavities, particularly in the context of archaeological prospection, karst cave exploration, and sinkhole hazard mitigation in shallow-mining areas. The study specifically evaluates the 3D Growth inversion method for analyzing high-resolution microgravity data to identify shallow voids that may contribute to sinkhole formation or surface subsidence. The authors emphasize the importance of tuning the inversion parameters to optimize cavity detection, particularly for long and narrow mining shafts in areas affected by abandoned brown coal mining.
The findings from the Čáry case study highlight the effectiveness of the Growth inversion technique in microgravimetric exploration for sinkhole hazard assessment. By reanalyzing the gravity dataset from Čáry, the researchers identified a potential sinkhole threat linked to mining access corridors and discovered an unexplained deeper body of negative density contrast associated with a gravity low in the northwest region of the study area. This anomaly requires further investigation through additional geophysical methods to confirm its nature and implications.
Introduction
In this study, we investigate the microgravimetric detection of near-surface cavities that pose risks to human safety and infrastructure, utilizing the Growth inversion approach. The analysis is based on residual complete Bouguer anomaly (RBA), which typically reveals signals in the range of several to tens of microgals (µGal). Given the inherent ambiguity in gravimetric solutions, where multiple models can fit the observed data, the identification of the most plausible solution necessitates the integration of constraints from other geophysical methods or geological insights. High-resolution, accurate microgravity data is essential for effectively detecting shallow cavities, as data noise can propagate into model uncertainty.
The Growth inversion method divides the subsurface into fixed-geometry elements, specifically right-rectangular prisms, and iteratively adjusts the density contrasts of these cells to construct model source bodies. This methodology has been previously validated through case studies in archaeological prospection and sinkhole hazard detection, demonstrating its potential effectiveness. Further assessments through three additional case studies have highlighted both the advantages and limitations of the Growth inversion approach in interpreting shallow voids. This paper continues this exploration by presenting a case study focused on identifying shallow voids linked to sinkhole hazards associated with abandoned coal mining in Čáry, located in the Slovak part of the Vienna Basin.
Discussion
The discussion section of the paper elaborates on the application of the Growth inversion methodology in 3D microgravimetry, specifically focusing on its use in identifying subsurface cavities and geological structures in the context of a case study at the Čáry Mine in Slovakia. The authors reference various implementations of the Growth inversion, namely GROWTH-dg for homogeneous solutions and GROWTH-23 for heterogeneous solutions, highlighting the importance of the balance factor ($\lambda$) in controlling model complexity and fit to gravity data. The iterative adjustment process involves populating a volumetric domain with pre-defined density contrasts, where the choice of $\lambda$ significantly influences the model’s characteristics, such as overfitting or over-regularization.
In the case study, microgravity surveys revealed recurrent sinkholes associated with abandoned mining corridors. The authors utilized both GROWTH-dg and GROWTH-23 to explore the presence of cavities and geological features, adjusting parameters like density contrast and $\lambda$ to refine their models. The results indicated the presence of small cavities aligned with the mining corridors and a deeper source body, labeled “A,” which could not be conclusively interpreted as void space. The findings suggest ongoing sinkhole hazards in the area, particularly near corridor 1, and emphasize the need for further geophysical exploration to verify the nature and extent of the identified structures. The discussion underscores the complexity of interpreting gravity data and the necessity of external constraints to enhance model reliability.
