المصدر المتعمد لما قبل التاريخ لسهم الشيطان، أطول صف حجري في بريطانيا Deliberate prehistoric sourcing of the Devil’s Arrows, Britain’s tallest stone row

شارك:
المجلة: Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences، المجلد: 482، العدد: 2345
DOI: https://doi.org/10.1098/rspa.2026.0504
تاريخ النشر: 2026-09-09
المؤلف: Anthony J. I. Clarke وآخرون
الموضوع الرئيسي: الدراسات الأثرية والجغرافية

نظرة عامة

تبحث هذه الدراسة في أصول وطرق نقل سهام الشيطان، وهو أعلى صف من الأحجار القائمة في بريطانيا، والذي يبلغ ارتفاعه حوالي 7 أمتار ويزن 25 طناً. على الرغم من النقاشات المستمرة حول أصلها، تستخدم الدراسة بصمات عمر الزركون-أباتيت U-Pb لتأسيس علاقة بين السهام وتكوينات صخور ميلستون غريت في بريمهم روكس، الواقعة على بعد 18 كم إلى الغرب. تشير النتائج إلى أن النقل الجليدي من بريمهم غير محتمل، مدعومًا بإعادة بناء تدفق الجليد الإقليمي، بينما تدعم عمليات التجوية السطحية المشتركة وفن الصخور المحتمل المنقوشة بالأكواب والحلقات هذه العلاقة بشكل أكبر.

تشير النتائج إلى أن الميجاليثات تم استخراجها ونقلها عن قصد من مصدر مرتفع متميز جغرافياً، بدلاً من أن يتم الحصول عليها بشكل عشوائي من المواد القريبة. يبرز هذا الاختيار المتعمد الأهمية الثقافية للمناظر الطبيعية في بناء الميجاليثات، مما يدل على فهم متقدم للهندسة وتفاعل ذو معنى مع مواقع جغرافية معينة. بالإضافة إلى ذلك، تُظهر الدراسة فعالية تقنيات أخذ العينات اللاصقة في استرداد المواد المعدنية الحبيبية لتحليل الأصل، مما يوفر نهجًا منهجيًا قيمًا للبحوث المستقبلية في هذا المجال.

مقدمة

تناقش مقدمة ورقة البحث أهمية العمارة الميجاليثية في المناظر الطبيعية النيوليثية في بريطانيا وأيرلندا، مع تسليط الضوء على الهياكل البارزة مثل سهام الشيطان، التي تم دراستها بشكل أقل مقارنة بالمواقع الأكثر بروزًا مثل ستونهنج ونيوغرانج. تقع سهام الشيطان في شمال يوركشاير، وتتكون من ثلاثة أحجار قائمة مرتبة في اتجاه شمال شمال غرب إلى جنوب جنوب شرق على مسافة 174 مترًا. تُعرف بأنها أعلى صف من الأحجار القائمة المتبقية في بريطانيا، حيث يبلغ ارتفاع الحجر الجنوبي حوالي 6.86 متر، مما يجعله ثاني أعلى ميجاليث بعد ميجاليث رودستون.

تشير الورقة إلى أنه على الرغم من أن تأريخ سهام الشيطان الدقيق لا يزال غير مؤكد بسبب نقص الحفريات الحديثة، يُعتقد أنها أُقيمت خلال الفترة النيوليثية المتأخرة إلى العصر البرونزي المبكر. كل حجر يظهر أبعادًا واتجاهات فريدة، مع انخفاض الارتفاعات من الجنوب إلى الشمال. تشير وجود الأخاديد الناتجة عن التجوية على أسطح الأحجار إلى تاريخ طويل من التعرض للعوامل الجوية، مما يبرز أهميتها الأثرية بشكل أكبر.

طرق

في هذا القسم، يوضح المؤلفون الطرق المستخدمة لأخذ العينات ومعالجة المواد من سهام الشيطان، ونصب باتل كروس، وجسر بيغ، مع الحصول على الأذونات المناسبة من مالكي الأراضي وتاريخ إنجلترا. استخدمت عملية أخذ العينات طريقة جديدة منخفضة الحجم، حيث تم تطبيق قطع من الشريط اللاصق بطول 20 سم على الميجاليثات لجمع الحد الأدنى من النمو البيولوجي السطحي. بعد فترة اتصال مدتها 5 دقائق، تمت إزالة الشريط، وتم استخراج الحبيبات الملصقة باستخدام زيت التربنتين المعدني، تلاها تنظيف باستخدام حلول المنظفات المتناوبة وحمامات فوق صوتية. تم فصل المعادن المغناطيسية الخشنة باستخدام مغناطيس نيوديميوم محمول، وشملت عملية التنقية اللاحقة فصل السوائل الثقيلة باستخدام هيدروبوليتونغستات (كثافة 2.85 غم سم$^{-3}$) وفصل مغناطيسي إيزوديناميكي باستخدام فرانتز.

تم تركيب الكمية النهائية من المعادن، التي تزن ≤0.1 غم، على أقراص إبوكسي بقطر 25 مم للتصوير في مركز جون دي لايتر باستخدام محلل المعادن المتكامل TESCAN وميكروسكوب إلكتروني مجهرى بمسح ميداني كلارا. سهل هذا التصوير حل الأنسجة الداخلية وأشكال البلورات، مما يساعد في اختيار مواقع الاستئصال بالليزر المستهدفة. بالإضافة إلى ذلك، تم جمع عينتين من الصخور (حوالي 1 كجم لكل منهما) من تكوينات بريمهم وبلامبتون روك، وتم تفكيكها باستخدام تفريغ كهربائي نبضي (SelFrag)، ومعالجتها للحصول على تركيزات الزركون-أباتيت من خلال تقنيات فصل المعادن الموصوفة سابقًا.

مناقشة

تركز قسم المناقشة في ورقة البحث على أصل وسياق تاريخ سهام الشيطان، وهو صف من الأحجار الميجاليثية في يوركشاير. كشفت الحفريات أن الأحجار مصنوعة من ميلستون غريت من حوض بينين، وهو رمل خشن من فترة ناموريان (حوالي 326-313 مليون سنة). يقع الصف ضمن منظر طبيعي طقوسي ما قبل التاريخ أوسع، والذي يتضمن العديد من الهينج النيوليثية. تشير المسوحات الجيوفيزيائية الحديثة إلى أن الصف الأصلي قد يمتد إلى ما وراء الأحجار الحالية، مع وجود أدلة على فتحات أحجار إضافية وعلامات محتملة على طول مسار يعرف باسم “المسار الشمالي العظيم”.

تشير التحليلات النظيرية، وخاصة تأريخ U-Pb للزركون والأباتيت الحبيبي، إلى أن سهام الشيطان قد نشأت على الأرجح من بريمهم روكس، على بعد حوالي 18 كم، بدلاً من بلامبتون روكس الأقرب. تتحدى هذه النتيجة الافتراضات السابقة حول سهولة الحصول على الأحجار في البناء ما قبل التاريخ، مما يشير إلى أن مواقع المحاجر المحددة كانت تحمل أهمية ثقافية وروحية كبيرة. كما تبرز الدراسة تعقيدات إعادة استخدام الأحجار في الهياكل اللاحقة، مثل نصب باتل كروس وجسر بيغ، التي دمجت مواد من سهام الشيطان. تعقد هذه الإعادة الاستخدام السياق الأثري، حيث تُخفي الأهمية الأصلية والمحاذاة للأحجار، بينما تحافظ في الوقت نفسه على وجودها المادي. بشكل عام، تؤكد الدراسة على التفاعل بين الأصل الجيولوجي والتفسير الأثري، كاشفة كيف يمكن أن يضيء التحليل النظيري على تاريخ الهياكل الميجاليثية وأهميتها الثقافية.

Journal: Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, Volume: 482, Issue: 2345
DOI: https://doi.org/10.1098/rspa.2026.0504
Publication Date: 2026-09-09
Author(s): Anthony J. I. Clarke et al.
Primary Topic: Archaeological and Geological Studies

Overview

This research investigates the origins and transportation methods of the Devil’s Arrows, the tallest standing stone alignment in Britain, which stands at approximately 7 meters and weighs 25 tonnes. Despite ongoing debates regarding their provenance, the study employs detrital zircon-apatite U-Pb age fingerprints to establish a connection between the Arrows and the Millstone Grit outcrops at Brimham Rocks, located 18 km to the west. The findings indicate that glacial transport from Brimham is unlikely, supported by regional ice-flow reconstructions, while shared surface weathering and potential cup-and-ring rock art further substantiate this link.

The results suggest that the megaliths were purposefully extracted and transported from a specific, geomorphologically distinctive upland source, rather than being opportunistically sourced from nearby materials. This deliberate selection process highlights the cultural significance of the landscape in megalith construction, indicating a sophisticated understanding of engineering and a meaningful engagement with particular geographic locations. Additionally, the study demonstrates the efficacy of adhesive peel sampling in recovering detrital mineral material for provenance analysis, offering a valuable methodological approach for future research in this area.

Introduction

The introduction of the research paper discusses the significance of megalithic architecture in the Neolithic landscape of Britain and Ireland, highlighting notable structures such as the Devil’s Arrows, which are less studied compared to more prominent sites like Stonehenge and Newgrange. The Devil’s Arrows, located in North Yorkshire, consist of three standing stones arranged in a north-northwest to south-southeast orientation over a distance of 174 meters. They are recognized as the tallest surviving standing stone row in Britain, with the southern stone measuring approximately 6.86 meters in height, making it the second-tallest megalith after the Rudston Monolith.

The paper notes that while the exact dating of the Devil’s Arrows remains uncertain due to a lack of recent excavations, they are believed to have been erected during the Late Neolithic to Early Bronze Age. Each stone exhibits unique dimensions and orientations, with the heights decreasing from south to north. The presence of weathering-induced grooves on the stones’ surfaces suggests a long history of exposure to the elements, further emphasizing their archaeological significance.

Methods

In this section, the authors detail the methods employed for sampling and processing materials from the Devil’s Arrows, Battle Cross monument, and Peg Bridge, with appropriate permissions obtained from landowners and Historic England. The sampling utilized a novel ultralow-volume peel method, where 20 cm sections of adhesive tape were applied to the megaliths to collect minimal biological surface growth. After a 5-minute contact period, the tape was removed, and the affixed grains were extracted using mineral turpentine, followed by cleaning with alternating detergent solutions and ultrasonic baths. Coarse magnetic minerals were separated using a handheld neodymium magnet, and further purification involved heavy-liquid separation with heteropolytungstate (density 2.85 g cm$^{-3}$) and Frantz isodynamic magnetic separation.

The final mineral fraction, weighing ≤0.1 g, was bulk-mounted onto 25 mm diameter epoxy discs for imaging at the John de Laeter Centre using a TESCAN Integrated Mineral Analyser and a Clara field-emission scanning electron microscope. This imaging facilitated the resolution of internal textures and crystal morphologies, aiding in targeted laser-ablation site selection. Additionally, two rock samples (approximately 1 kg each) from Brimham and Plumpton Rock outcrops were collected, disaggregated using pulsed electric discharge (SelFrag), and processed to obtain zircon-apatite concentrates through the previously described mineral-separation techniques.

Discussion

The discussion section of the research paper focuses on the provenance and historical context of the Devil’s Arrows, a megalithic stone alignment in Yorkshire. Excavations have revealed that the stones are made of Pennine Basin Millstone Grit, a coarse-grained sandstone from the Namurian period (approximately 326-313 Ma). The alignment is situated within a broader prehistoric ritual landscape, which includes several Neolithic henges. Recent geophysical surveys suggest that the original alignment may have extended beyond the current stones, with evidence of additional stone sockets and potential markers along a route known as the ‘Great North Route’.

Isotopic analysis, particularly U-Pb dating of detrital zircon and apatite, indicates that the Devil’s Arrows likely originated from Brimham Rocks, approximately 18 km away, rather than the closer Plumpton Rocks. This finding challenges previous assumptions about the convenience of stone sourcing in prehistoric construction, suggesting that specific quarry sites held significant cultural and spiritual importance. The study also highlights the complexities of stone reuse in later structures, such as the Battle Cross and Peg Bridge, which incorporated materials from the Devil’s Arrows. This reuse complicates the archaeological context, as it obscures the original significance and alignment of the stones, while simultaneously preserving their material existence. Overall, the research underscores the interplay between geological provenance and archaeological interpretation, revealing how isotopic analysis can illuminate the histories of megalithic structures and their cultural significance.