DOI: https://doi.org/10.1007/s11270-026-09170-4
تاريخ النشر: 2026-02-07
المؤلف: Ainur Balqis Radzi وآخرون
الموضوع الرئيسي: الميكروبلاستيك وتلوث البلاستيك
نظرة عامة
تتناول هذه المراجعة الزيادة المتزايدة في انتشار الميكروبلاستيك (MPs) في البيئات الداخلية، حيث غالبًا ما تتجاوز التركيزات تلك الموجودة في الهواء الطلق. تشمل المصادر الشائعة للميكروبلاستيك الأنسجة والأثاث والدهانات ومنتجات التنظيف، مع تأثر وفرتها بعوامل مثل نوع التهوية، مستويات الإشغال، وممارسات التنظيف. تقوم المراجعة بتلخيص النتائج المتعلقة بالميكروبلاستيك المحمول جواً والموجود في الغبار عبر بيئات داخلية متنوعة، كاشفةً أن البلدان ذات الدخل المنخفض والمتوسط، وخاصة في جنوب شرق آسيا وأمريكا الجنوبية، تظهر تركيزات أعلى من الميكروبلاستيك المحمول جواً مقارنةً بالمناطق ذات الدخل المرتفع. يتم مناقشة التقدم في التقنيات التحليلية، مثل المجهر والطيفية، إلى جانب الآثار السمية للتعرض للميكروبلاستيك، والتي تشمل الإجهاد التأكسدي، الالتهاب، وتأثيرات على أنظمة الأعضاء المتعددة.
تخلص المراجعة إلى أن الميكروبلاستيك المحمول جواً منتشر في بيئات داخلية متنوعة، مع اختلاف التركيزات المبلغ عنها بشكل كبير بناءً على الموقع وطرق أخذ العينات. توفر تقنيات أخذ العينات النشطة بيانات أكثر دقة حول الكسور القابلة للاستنشاق، بينما تلتقط الطرق السلبية جزيئات أكبر مستقرة. تشمل العوامل المؤثرة على مستويات الميكروبلاستيك الداخلي كثافة السكان، وتكرار التنظيف، والتهوية، مما يستدعي مزيدًا من البحث لفهم علاقاتها مع التركيزات المحمولة جواً. تم تحديد طريق الاستنشاق كمسار التعرض الرئيسي، مع قدرة الميكروبلاستيك على التراكم في أنظمة الجسم المختلفة. تؤكد النتائج على الحاجة الملحة لوضع منهجيات موحدة، وتقييمات شاملة للمخاطر، واستراتيجيات تخفيف فعالة، مثل تحسين التهوية واستبدال المواد، لمعالجة تلوث الميكروبلاستيك الداخلي وحماية صحة الإنسان. يجب أن يركز البحث المستقبلي على بروتوكولات متناسقة ودراسات تأثيرات الصحة على المدى الطويل، خاصة في المناطق ذات الدخل المنخفض والمتوسط.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على القضية المنتشرة للميكروبلاستيك (MPs) والنانوبلاستيك (NPs) في البيئة، مع التأكيد على تراكمها والمخاطر الصحية المحتملة. يُعرف الميكروبلاستيك بأنه جزيئات بلاستيكية أصغر من 5 مم، ومن المتوقع أن تشكل 13.2% من وزن البلاستيك العالمي بحلول عام 2026. تشير الدراسات الحديثة إلى أن هذه الجزيئات ليست فقط شائعة في النظم البيئية المائية والبرية، ولكنها أيضًا موجودة بشكل كبير في الهواء الداخلي، حيث تشمل المصادر الأنسجة والأثاث ومنتجات التنظيف. تركيز الميكروبلاستيك المحمول جواً أعلى بشكل ملحوظ في الداخل بسبب عوامل مثل نشاط السكان وممارسات التهوية.
تناقش الورقة الخصائص الفيزيائية والكيميائية للميكروبلاستيك المحمول جواً، والتي تمكنها من حمل إضافات خطرة وملوثات عضوية ثابتة (POPs)، مما يثير القلق بشأن صحة الإنسان ورصد البيئة. تشير الأدلة إلى أن التعرض للميكروبلاستيك مرتبط بمختلف الآثار الصحية السلبية، بما في ذلك الإجهاد التأكسدي واضطراب الغدد الصماء. على الرغم من الاهتمام المتزايد بالنانوبلاستيك، لا تزال هناك تحديات في تحديدها وتحليلها. تهدف المراجعة إلى تلخيص المعرفة الحالية حول الميكروبلاستيك المحمول جواً في الداخل، مع معالجة الفجوات في مسارات التعرض، والنتائج الصحية، وتطوير السياسات، بينما تقترح استراتيجيات تخفيف مثل تحسين التهوية واستخدام المواد القابلة للتحلل البيولوجي.
الطرق
تحدد قسم المنهجية في هذه المراجعة بحثًا شاملاً في الأدبيات تم إجراؤه عبر قواعد البيانات الأكاديمية الرئيسية من يناير 2019 إلى يناير 2026، مع التركيز على الميكروبلاستيك المحمول جواً في البيئات الداخلية. استخدم البحث مجموعة من الكلمات الرئيسية المتعلقة بالميكروبلاستيك المحمول جواً، والمخاطر الصحية، والتدخلات السياسية. أكدت معايير الإدراج على المقالات التي تمت مراجعتها من قبل الأقران باللغة الإنجليزية والتي تناولت الميكروبلاستيك المحمول جواً والموجود في الغبار، بينما قامت معايير الاستبعاد بتصفية الملخصات المؤتمرات، والمطبوعات السابقة، والدراسات التي تفتقر إلى تحديد البوليمر. تسلط المراجعة الضوء على أهمية الفحص الدقيق للعناوين والملخصات والنصوص الكاملة لضمان الصلة بأهداف البحث.
تُصنف طرق الكشف عن الميكروبلاستيك المحمول جواً في الداخل إلى تقنيات أخذ عينات سلبية ونشطة. قد تتجاهل الطرق السلبية، على الرغم من كونها فعالة من حيث التكلفة وبسيطة، الجزيئات الأصغر، بينما توفر أخذ العينات النشطة تقديرًا أكثر دقة لتركيزات الميكروبلاستيك المحمول جواً ولكنها تقدم تباينًا بسبب بروتوكولات مختلفة. بعد الجمع، يكون التحضير المسبق للعينة ضروريًا لعزل الميكروبلاستيك، باستخدام طرق مثل فصل الكثافة والعمليات التأكسدية، على الرغم من أن هذه يمكن أن تكون مستهلكة للوقت وعرضة للتلوث. تشمل التقنيات التحليلية لتحديد الميكروبلاستيك طرقًا تعتمد على المجهر وتقنيات طيفية مثل الطيف الكهرومغناطيسي بالأشعة تحت الحمراء (FTIR) وطيف رامان، ولكل منها مزاياها وقيودها. تلاحظ المراجعة أيضًا الفجوات في المنهجيات بين البلدان ذات الدخل المرتفع والبلدان ذات الدخل المنخفض والمتوسط (LMICs)، حيث تعتمد LMICs غالبًا على تقنيات أبسط وأقل تكلفة بسبب قيود الموارد. بشكل عام، يبرز القسم الحاجة إلى بروتوكولات موحدة لتعزيز القابلية للمقارنة والموثوقية في أبحاث الميكروبلاستيك المحمول جواً في الداخل.
المناقشة
يتناول قسم المناقشة في الورقة البحثية خصائص الميكروبلاستيك المحمول جواً في الداخل، مع التركيز على خصائصها الفيزيائية والكيميائية، ومصادرها، والمخاطر الصحية المحتملة. يكون الميكروبلاستيك المحمول جواً في الغالب أصغر من 5 مم، مع أحجام تتراوح من 20 ميكرومتر إلى 1000 ميكرومتر، ويتأثر توزيعها بطريقة أخذ العينات المستخدمة. تميل أخذ العينات النشطة إلى التقاط الميكروبلاستيك الأصغر، بينما تنتج الطرق السلبية قطعًا أكبر وغير منتظمة، مع كون الألياف الشكل الأكثر شيوعًا. من الجدير بالذكر أن الدراسة تسلط الضوء على أن المصادر الداخلية تساهم بنحو 70% من الميكروبلاستيك المحمول جواً، تأتي أساسًا من الأنسجة والأشياء المنزلية، بينما تمثل المصادر الخارجية حوالي 30%.
تناقش الورقة أيضًا أنواع البوليمر الشائعة الموجودة في البيئات الداخلية، مثل البولي أميد (PA)، والبولي إيثيلين (PE)، والبولي بروبيلين (PP)، والبولي إيثيلين تيريفثاليت (PET)، حيث يرتبط PET بشكل خاص بتساقط الأنسجة. علاوة على ذلك، يثير وجود إضافات بلاستيكية، التي يمكن أن تعمل كمُعطلات غدد صماء، القلق بشأن آثارها السمية على صحة الإنسان. يختتم القسم بتحديد عوامل الخطر المختلفة التي تؤثر على تراكم الميكروبلاستيك المحمول جواً، بما في ذلك مستويات الإشغال، وممارسات التنظيف، وظروف التهوية. تعتبر التهوية الفعالة أمرًا حيويًا، حيث يمكن أن تزيد أو تقلل من تركيزات الميكروبلاستيك الداخلي، اعتمادًا على تصميم وأنماط استخدام المساحات الداخلية. بشكل عام، تؤكد النتائج على التفاعل المعقد للعوامل المساهمة في تلوث الميكروبلاستيك الداخلي والحاجة إلى مزيد من البحث لتقييم المخاطر الصحية المرتبطة بهذه الجزيئات.
DOI: https://doi.org/10.1007/s11270-026-09170-4
Publication Date: 2026-02-07
Author(s): Ainur Balqis Radzi et al.
Primary Topic: Microplastics and Plastic Pollution
Overview
This review addresses the increasing prevalence of microplastics (MPs) in indoor environments, where concentrations often surpass those found outdoors. Common sources of MPs include textiles, furniture, paints, and cleaning products, with their abundance influenced by factors such as ventilation type, occupancy levels, and cleaning practices. The review synthesizes findings on airborne and dust-borne MPs across various indoor settings, revealing that lower-middle-income countries, particularly in Southeast Asia and South America, exhibit higher airborne MP concentrations compared to high-income regions. Advances in analytical techniques, such as microscopy and spectroscopy, are discussed, alongside the toxicological implications of MP exposure, which include oxidative stress, inflammation, and effects on multiple organ systems.
The review concludes that airborne MPs are widespread in diverse indoor environments, with reported concentrations varying significantly based on location and sampling methods. Active sampling techniques yield more accurate data on respirable fractions, while passive methods capture larger settled particles. Factors influencing indoor MP levels include occupant density, cleaning frequency, and ventilation, necessitating further research to understand their correlations with airborne concentrations. The inhalation route is identified as the primary exposure pathway, with MPs capable of accumulating in various body systems. The findings underscore the urgent need for standardized methodologies, comprehensive risk assessments, and effective mitigation strategies, such as improved ventilation and material substitution, to address indoor MP pollution and protect human health. Future research should focus on harmonized protocols and long-term health impact studies, particularly in low- and middle-income regions.
Introduction
The introduction of this research paper highlights the pervasive issue of microplastics (MPs) and nano plastics (NPs) in the environment, emphasizing their accumulation and potential health risks. MPs, defined as plastic particles smaller than 5 mm, are projected to constitute 13.2% of global plastic weight by 2026. Recent studies indicate that these particles are not only prevalent in aquatic and terrestrial ecosystems but also significantly present in indoor air, where sources include textiles, furniture, and cleaning products. The concentration of airborne MPs is notably higher indoors due to factors such as occupant activity and ventilation practices.
The paper discusses the physicochemical properties of airborne MPs, which enable them to carry hazardous additives and persistent organic pollutants (POPs), raising concerns for human health and environmental monitoring. Evidence suggests that exposure to MPs is linked to various adverse health effects, including oxidative stress and endocrine disruption. Despite the growing interest in NPs, challenges remain in their analytical determination and quantification. The review aims to synthesize current knowledge on indoor airborne MPs, addressing gaps in exposure pathways, health outcomes, and policy development, while proposing mitigation strategies such as improved ventilation and the use of biodegradable materials.
Methods
The methodology section of this review outlines a comprehensive literature search conducted across major academic databases from January 2019 to January 2026, focusing on airborne microplastics (MPs) in indoor environments. The search utilized a combination of keywords related to airborne microplastics, health risks, and policy interventions. Inclusion criteria emphasized peer-reviewed articles in English that addressed indoor airborne and dust-borne MPs, while exclusion criteria filtered out conference abstracts, preprints, and studies lacking polymer identification. The review highlights the importance of rigorous screening of titles, abstracts, and full texts to ensure relevance to the research objectives.
The detection methods for indoor airborne MPs are categorized into passive and active sampling techniques. Passive methods, while cost-effective and simple, may overlook smaller particles, whereas active sampling provides more accurate quantification of airborne MP concentrations but introduces variability due to differing protocols. Following collection, sample pretreatment is essential for isolating MPs, employing methods such as density separation and oxidative processes, though these can be time-consuming and prone to contamination. Analytical techniques for identifying MPs include microscopy-based methods and spectroscopic techniques like Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy, each with its advantages and limitations. The review also notes disparities in methodologies between high-income and low-and middle-income countries (LMICs), with LMICs often relying on simpler, lower-cost techniques due to resource constraints. Overall, the section emphasizes the need for standardized protocols to enhance comparability and reliability in indoor airborne MP research.
Discussion
The discussion section of the research paper delves into the characterization of indoor airborne microplastics (MPs), emphasizing their physical and chemical properties, sources, and potential health risks. Airborne MPs are predominantly smaller than 5 mm, with sizes ranging from 20 µm to 1000 µm, and their distribution is influenced by the sampling method employed. Active sampling tends to capture smaller MPs, while passive methods yield larger, irregular fragments, with fibers being the most common shape. Notably, the study highlights that indoor sources contribute approximately 70% of airborne MPs, primarily from textiles and household items, while outdoor sources account for about 30%.
The paper also discusses the prevalent polymer types found in indoor environments, such as polyamide (PA), polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET), with PET being particularly associated with textile shedding. Furthermore, the presence of plastic additives, which can act as endocrine disruptors, raises concerns regarding their toxicological effects on human health. The section concludes by identifying various risk factors influencing the accumulation of airborne MPs, including occupancy levels, cleaning practices, and ventilation conditions. Effective ventilation is crucial, as it can either exacerbate or mitigate indoor MP concentrations, depending on the design and usage patterns of indoor spaces. Overall, the findings underscore the complex interplay of factors contributing to indoor MP pollution and the need for further research to assess health risks associated with these particles.
