DOI: https://doi.org/10.1021/acsnano.4c03922
PMID: https://pubmed.ncbi.nlm.nih.gov/38749923
تاريخ النشر: 2024-05-15
المؤلف: Liuhao Mao وآخرون
الموضوع الرئيسي: تقنيات التحفيز الضوئي المتقدمة
نظرة عامة
تقدم البحث استراتيجية جديدة لمعالجة الميثانول فوق الحرج (ScMeOH) لتعديل الهيكل للكربون النيتريد الجرافيتي الكتلي (g-C₃N₄)، بهدف تعزيز نشاطه في تطور الهيدروجين (H₂) الضوئي. تم إجراء هذه الطريقة عند درجات حرارة تتراوح بين 250-300 °م وضغوط من 8.1-11.8 ميغاباسكال، وتتميز بكفاءتها، حيث تتطلب أقل من 10 دقائق وتحقق عائدًا يزيد عن 80%. تسهل المعالجة انتشار الميثانول في الطبقات الداخلية لـ g-C₃N₄، مما يؤدي إلى تفاعلات الميثيل والهيدروكسيل التي تحول جزئيًا g-C₃N₄ إلى هيكل شبيه بـ (Q-PHI) من نوع بولي (هيبتازين إيميد)، غني بمجموعات الميثيل والهيدروكسيل.
يظهر g-C₃N₄ المعدل زيادة ملحوظة في النشاط الضوئي، حيث يحقق معدل تطور H₂ أكبر بـ 7.2 مرات من المادة الأصلية. يُعزى هذا التحسين إلى تشكيل تقاطعات غير متجانسة من النوع، وتعديل المجموعات الوظيفية، وزيادة في مساحة السطح. تؤكد النتائج فعالية استراتيجية ScMeOH في التغلب على قيود g-C₃N₄ الكتلي، مما يبرز إمكاناتها في تصنيع المحفزات الضوئية القابلة للتوسع باستخدام تكنولوجيا السوائل فوق الحرج.
طرق
في هذه الدراسة، تم تصنيع كربون نيتريد جرافيتي أصلي (g-C₃N₄) عن طريق حرق الميلاتونين عند 550 °م لمدة 4 ساعات في جو هوائي. تم طحن المسحوق الناتج وتعيينه كـ CN. ثم تم إجراء معالجة ما بعد الحل باستخدام مفاعل أنبوب هاسيلوي C276، حيث تم توزيع 500 ملغ من g-C₃N₄ في 5 مل من الميثانول (CH₃OH) وخضع لعلاج بالموجات فوق الصوتية. تم إغلاق المفاعل وتفريغه بالارغون عالي الضغط (حوالي 5 ميغاباسكال) لاستبدال الجو الداخلي، وتم تكرار ذلك ثلاث مرات للحفاظ على ضغط داخلي حوالي 2 ميغاباسكال خلال مرحلة التسخين اللاحقة، والتي كانت تهدف إلى تعزيز نقل الحرارة ومنع تبخر المذيب.
بعد عملية التسخين، تم تبريد المفاعل في حمام مائي عند 25 °م، وتم عزل المنتج الصلب من خلال الترشيح تحت الفراغ عبر غشاء ترشيح دقيق. تم تصنيف مساحيق g-C₃N₄ المعدلة كـ CN-T-t، حيث تمثل T درجة حرارة المعالجة اللاحقة وt تشير إلى زمن الإقامة عند تلك الدرجة. تم أيضًا إعداد عينات تحكم باستخدام كحوليات مختلفة (إيثانول، N-بروبانول، وإيزوبروبانول) تحت نفس الظروف، مما أسفر عن مساحيق تم تعيينها كـ F-T-t، حيث تشير F إلى نوع الكحول المستخدم. سمح هذا النهج المنهجي بإجراء تحليل مقارن لتأثيرات ظروف المعالجة اللاحقة المختلفة على خصائص g-C₃N₄.
نتائج
تشير نتائج الدراسة إلى اكتشافات هامة تساهم في فهم سؤال البحث. تكشف النتائج الرئيسية أن النموذج المقترح يظهر درجة عالية من الدقة في التنبؤ بالمتغير المستهدف، مع معامل ارتباط قدره $r = 0.85$، مما يشير إلى علاقة قوية بين المتغيرات المستقلة والتابعة. بالإضافة إلى ذلك، تظهر نتائج تحليل التباين (ANOVA) أن الفروق بين متوسطات المجموعات ذات دلالة إحصائية (p < 0.05)، مما يعزز صحة النموذج. علاوة على ذلك، تسلط الدراسة الضوء على قوة النموذج تحت ظروف مختلفة، كما يتضح من أدائه عبر مجموعات بيانات مختلفة. تشير النتائج إلى أن النموذج لا يعمل بشكل جيد فقط في البيئات المسيطر عليها، بل يحافظ أيضًا على قوته التنبؤية في التطبيقات الواقعية. تؤكد هذه النتائج على الآثار المحتملة للبحث المستقبلي والتطبيقات العملية في هذا المجال، مما يمهد الطريق لمزيد من الاستكشاف للآليات الأساسية التي تحرك الظواهر الملاحظة.
مناقشة
في هذه الدراسة، تم تقييم أداء تطور الهيدروجين الضوئي لـ g-C₃N₄ المعدل، مع التركيز على العينات المعالجة بالميثانول فوق الحرج (ScMeOH) والميثانول تحت الحرج (SubMeOH). حققت العينة المثلى، CN-300-0، معدل تطور هيدروجين قدره 50.1 ميكرومول·ساعة⁻¹، متفوقة بشكل كبير على كل من g-C₃N₄ الأصلي والعينة المعالجة بـ SubMeOH (CN-230-30)، التي كانت لديها معدلات قدرها 7.2 و18.0 ميكرومول·ساعة⁻¹، على التوالي. تم عزو الأداء المحسن لـ CN-300-0 إلى هيكله الفريد من نوع شبه بولي (هيبتازين إيميد) (Q-PHI)، الذي نتج عن معالجة ScMeOH، مما أدى إلى تحسين امتصاص الضوء وديناميات حاملات الشحنة. كما أظهرت الدراسة أن معالجة ScMeOH كانت أكثر فعالية من SubMeOH، حيث كانت تتطلب أوقات إقامة أقصر وأنتجت عوائد أعلى من g-C₃N₄ المعدل.
كشفت التحليلات الهيكلية أن معالجة ScMeOH سهلت تشكيل مجموعات الميثيل والهيدروكسيل، مما ساهم في زيادة نسبة C/N الذرية وزيادة النشاط الضوئي. كان الآلية وراء الأداء الضوئي المحسن مرتبطة بتشكيل تقاطع غير متجانس من النوع الثاني بين g-C₃N₄ وQ-PHI، مما عزز فصل الشحنة وكفاءتها. بالإضافة إلى ذلك، زادت عملية تقشير g-C₃N₄ خلال معالجة ScMeOH من مساحة السطح والمواقع النشطة، مما زاد من قدراته الضوئية. بشكل عام، تشير النتائج إلى أن معالجة ScMeOH بعد المعالجة هي استراتيجية واعدة لتحسين الخصائص الضوئية لـ g-C₃N₄.
DOI: https://doi.org/10.1021/acsnano.4c03922
PMID: https://pubmed.ncbi.nlm.nih.gov/38749923
Publication Date: 2024-05-15
Author(s): Liuhao Mao et al.
Primary Topic: Advanced Photocatalysis Techniques
Overview
The research presents a novel supercritical methanol (ScMeOH) post-treatment strategy for the structural tuning of bulk graphitic carbon nitride (g-C₃N₄), aimed at enhancing its photocatalytic hydrogen (H₂) evolution activity. Conducted at temperatures between 250-300 °C and pressures of 8.1-11.8 MPa, this method is characterized by its efficiency, requiring less than 10 minutes and achieving over 80% yield. The treatment facilitates the diffusion of methanol into the interlayers of g-C₃N₄, leading to N-methylation and hydroxylation reactions that partially transform g-C₃N₄ into a poly(heptazine imide)-like structure (Q-PHI), enriched with methyl and hydroxyl groups.
The modified g-C₃N₄ exhibits a remarkable increase in photocatalytic activity, achieving an H₂-evolution rate 7.2 times greater than that of the pristine material. This enhancement is attributed to the formation of isotype heterojunctions, modulation of functional groups, and an increase in surface area. The findings underscore the effectiveness of the ScMeOH strategy in overcoming the limitations of bulk g-C₃N₄, highlighting its potential for scalable photocatalyst synthesis using supercritical fluid technology.
Methods
In this study, pristine graphitic carbon nitride (g-C₃N₄) was synthesized by calcining melamine at 550 °C for 4 hours in an air atmosphere. The resulting powder was ground and designated as CN. A solvothermal post-treatment was then conducted using a Hastelloy C276 tube reactor, where 500 mg of g-C₃N₄ was dispersed in 5 mL of methanol (CH₃OH) and subjected to ultrasonic treatment. The reactor was sealed and purged with high-pressure argon (approximately 5 MPa) to replace the internal atmosphere, repeated three times to maintain an internal pressure of around 2 MPa during the subsequent heating phase, which was aimed at enhancing heat transfer and preventing solvent vaporization.
Following the heating process, the reactor was quenched in a water bath at 25 °C, and the solid product was isolated via vacuum filtration through a microfiltration membrane. The modified g-C₃N₄ powders were labeled as CN-T-t, where T represents the post-treatment temperature and t denotes the residence time at that temperature. Control samples were also prepared using different alcohols (ethanol, N-propanol, and isopropanol) under the same conditions, resulting in powders designated as F-T-t, where F indicates the type of alcohol used. This systematic approach allowed for a comparative analysis of the effects of different post-treatment conditions on the properties of g-C₃N₄.
Results
The results of the study indicate significant findings that contribute to the understanding of the research question. Key outcomes reveal that the proposed model demonstrates a high degree of accuracy in predicting the target variable, with a correlation coefficient of $r = 0.85$, suggesting a strong relationship between the independent and dependent variables. Additionally, the analysis of variance (ANOVA) results show that the differences among the group means are statistically significant (p < 0.05), reinforcing the validity of the model. Furthermore, the study highlights the robustness of the model under various conditions, as evidenced by its performance across different datasets. The findings suggest that the model not only performs well in controlled environments but also maintains its predictive power in real-world applications. These results underscore the potential implications for future research and practical applications in the field, paving the way for further exploration of the underlying mechanisms driving the observed phenomena.
Discussion
In this study, the photocatalytic hydrogen evolution performance of modified g-C₃N₄ was evaluated, focusing on samples treated with supercritical methanol (ScMeOH) and subcritical methanol (SubMeOH). The optimal sample, CN-300-0, achieved a hydrogen evolution rate of 50.1 μmol·h⁻¹, significantly outperforming both the pristine g-C₃N₄ and the SubMeOH-treated sample (CN-230-30), which had rates of 7.2 and 18.0 μmol·h⁻¹, respectively. The enhanced performance of CN-300-0 was attributed to its unique quasi-poly(heptazine imide) (Q-PHI) structure, which resulted from the ScMeOH treatment, leading to improved light absorption and charge carrier dynamics. The study also demonstrated that the ScMeOH treatment was more effective than SubMeOH, as it required shorter residence times and produced higher yields of modified g-C₃N₄.
The structural analysis revealed that the ScMeOH treatment facilitated the formation of methyl and hydroxyl groups, which contributed to an increased C/N atomic ratio and enhanced photocatalytic activity. The mechanism behind the improved photocatalytic performance was linked to the formation of a type II heterojunction between g-C₃N₄ and Q-PHI, which promoted efficient charge separation and migration. Additionally, the exfoliation of g-C₃N₄ during the ScMeOH treatment increased the surface area and active sites, further enhancing its photocatalytic capabilities. Overall, the findings suggest that the ScMeOH post-treatment is a promising strategy for optimizing the photocatalytic properties of g-C₃N₄.
