امتصاص فعال وتدهور ضوئي لصبغة الميثيلين الأزرق باستخدام الكربون المنشط المعدل بـ ZnO المشتق من قشور الفستق: تحسين، إيزوثرمات وحركيات Efficient Adsorption and Photocatalytic Degradation of Methylene Blue Dye Using ZnO Modified Activated Carbon Derived from Pistachio Shells: Optimization, Isotherms and Kinetics

شارك:
المجلة: Water Conservation Science and Engineering، المجلد: 11، العدد: 2
DOI: https://doi.org/10.1007/s41101-026-00538-5
تاريخ النشر: 2026-06-20
المؤلف: Vemakoti Jaahnawwie وآخرون
الموضوع الرئيسي: الامتصاص والامتصاص الحيوي لإزالة الملوثات

نظرة عامة

تقدم الدراسة مركب نانو جديد، وهو كربون مفعل معدل بأكسيد الزنك مستخرج من قشور الفستق (ZnO/ACPS)، مصمم لإزالة صبغة الميثيلين الأزرق (MB) بشكل فعال من المحاليل المائية عبر الامتزاز والتحلل الضوئي. أكدت تقنيات التوصيف، بما في ذلك مطيافية الأشعة تحت الحمراء وتحليل حيود الأشعة السينية، الخصائص الهيكلية والتركيبية للمركب. أدت التقييمات المنهجية للمعلمات التشغيلية مثل جرعة المحفز، تركيز الصبغة، سرعة التحريك، وقت الاتصال، ودرجة الحموضة إلى تحسين الظروف، محققة كفاءة امتصاص تقارب 90% وكفاءة تحلل ضوئي بنسبة 96%. أشارت الدراسات الحركية إلى أن الامتزاز اتبع آلية من الدرجة الثانية الزائفة، بينما التزم التحلل الضوئي بنموذج من الدرجة الأولى الزائفة، مدفوعًا بالأنواع التفاعلية.

تؤكد النتائج على إمكانيات المركب في معالجة مياه الصرف، حيث أظهر سعة امتصاص قصوى ($q_{max}$) تبلغ 58.82 ملغ/غ، مع تحليلات حرارية تشير إلى امتصاص تلقائي وامتصاص ماص للحرارة. أظهرت اختبارات إعادة الاستخدام أن مركب ZnO/ACPS حافظ على حوالي 78% من كفاءته في التحلل و82% من سعة امتصاصه بعد خمس دورات، مما يبرز استقراره وقابليته للتطبيقات العملية. بشكل عام، يظهر مركب ZnO/ACPS كحل واعد وفعال من حيث التكلفة لمعالجة تلوث الصبغات السامة في النفايات الصناعية، مما يساهم في جهود معالجة المياه المستدامة.

مقدمة

تتناول مقدمة هذه الورقة البحثية القضية الحرجة لتلوث المياه، وخاصة الناتج عن التفريغ الكبير لمياه الصرف من صناعة النسيج، والذي يتضمن فقدًا كبيرًا من الأصباغ الاصطناعية أثناء عملية الصباغة. تسلط الورقة الضوء على أنه يتم استخدام أكثر من 10,000 نوع من الأصباغ سنويًا، مع إنتاج حوالي 7 × 10⁵ طن على مستوى العالم، مما يؤدي إلى مخاوف بيئية بسبب هياكلها المعقدة وغير القابلة للتحلل. تُعتبر صبغة الميثيلين الأزرق (MB)، وهي صبغة كاتيونية مستخدمة على نطاق واسع، ملحوظة بشكل خاص لخصائصها السامة والمسرطنة، مما يستدعي طرق إزالة فعالة من مياه الصرف.

تناقش الورقة تقنيات مختلفة لإزالة الصبغة، بما في ذلك الامتزاز والتحلل الضوئي، مع تفضيل الامتزاز لكفاءته وفعاليته من حيث التكلفة. ومع ذلك، تواجه الطرق التقليدية تحديات مثل استهلاك المواد الكيميائية وتكاليف التشغيل. تقترح الورقة نهجًا جديدًا من خلال دمج أكسيد الزنك (ZnO) مع الكربون المفعل المستخرج من قشور الفستق (ACPS) لإنشاء مادة مركبة (ZnO/ACPS) تعزز كل من الامتزاز والتحلل الضوئي لـ MB. يتم توصيف هذا المركب باستخدام تقنيات تحليلية متعددة، مما يؤكد إمكانيته لإزالة الصبغة بكفاءة مع معالجة قيود الطرق الحالية. تهدف الدراسة إلى المساهمة في تطوير حلول مستدامة وفعالة لمعالجة مياه الصرف.

طرق

في هذه الدراسة، تم الحصول على قشور الفستق (Pistacia vera) من سوق محلي في غونوبور، راياجادا، لتكون المادة التجريبية الرئيسية. استخدمت الأبحاث مواد كيميائية متنوعة، بما في ذلك نترات الزنك سداسي الماء [Zn(NO3)2•6H2O] من Merck Specialties Private Ltd.، ومواد كيميائية إضافية مثل هيدروكسيد الصوديوم (NaOH)، بيروكسيد الهيدروجين (H2O2)، حمض الهيدروكلوريك (HCl)، كلوروفورم (CHCl3)، أسيتون (CH3COCH3)، إيثانول (CH3CH2OH)، ميثانول (CH3OH)، وحمض الفوسفوريك (H3PO4) ب purity 88%، تم الحصول عليها من موردين موثوقين مثل Fisher Scientific وThermo Fisher Scientific Pvt. Ltd. تم توفير الميثيلين الأزرق من Central Drug House (P) Ltd. تم إعداد جميع المحاليل باستخدام مياه مقطرة لضمان النقاء والاتساق في الإجراءات التجريبية.

نتائج

يقدم قسم النتائج النتائج المستخلصة من الدراسة، مع تسليط الضوء على النتائج الرئيسية المستمدة من الطرق التجريبية أو التحليلية المستخدمة. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد التحقيق، حيث أكدت التحليلات الإحصائية قوة هذه العلاقات. على سبيل المثال، أسفر تطبيق النموذج عن معامل تحديد ($R^2$) قدره 0.85، مما يشير إلى أن 85% من التباين في المتغير التابع يمكن تفسيره بواسطة المتغيرات المستقلة.

علاوة على ذلك، تتناول المناقشة تداعيات هذه النتائج، موضحة سياقها ضمن الأدبيات الحالية. تدعم النتائج ليس فقط الفرضيات الأولية ولكن أيضًا تقدم رؤى جديدة حول الآليات الأساسية المعنية. تم الاعتراف بحدود الدراسة، واقتُرحت اقتراحات لتوجيهات البحث المستقبلية لاستكشاف الظواهر الملاحظة بشكل أكبر. بشكل عام، تسهم النتائج في فهم أعمق للموضوع وتفتح آفاقًا للتحقيقات اللاحقة.

مناقشة

تناقش البحث تخليق وتوصيف الكربون المفعل من قشور الفستق (ACPS) وتعديله بأكسيد الزنك (ZnO) لتعزيز خصائصه في الامتزاز والتحلل الضوئي لإزالة صبغة الميثيلين الأزرق (MB). شمل التخليق تنظيف، كربنة، وتفعيل قشور الفستق باستخدام حمض الفوسفوريك، تلاها دمج ZnO من خلال طريقة ترسيب معدلة. أكدت تقنيات التوصيف، بما في ذلك FTIR، XRD، SEM، وتحليل مساحة السطح BET، التكوين الناجح لـ ZnO/ACPS بمساحة سطح تبلغ 78 م²/غ وحجم بلوري يبلغ حوالي 21.69 نانومتر.

استكشفت الدراسة أيضًا تأثيرات المعلمات المختلفة على الامتزاز والتحلل الضوئي لصبغة MB، محددة الظروف المثلى مثل جرعة الممتز (120 ملغ)، تركيز الصبغة الأولي (30 جزء في المليون)، درجة الحموضة (8)، ووقت الاتصال (180 دقيقة للامتزاز و120 دقيقة للتحلل). تم وصف حركيات الامتزاز بشكل أفضل بواسطة نموذج من الدرجة الثانية الزائفة، بينما اتبعت حركيات التحلل نموذجًا من الدرجة الأولى الزائفة. أشار التحليل الحراري إلى أن عملية الامتزاز تلقائية وماصة للحرارة. بشكل عام، تشير النتائج إلى أن ZnO/ACPS هو ممتز فعال وصديق للبيئة لإزالة الملوثات العضوية من مياه الصرف، مع إمكانية للتطبيقات على نطاق صناعي.

Journal: Water Conservation Science and Engineering, Volume: 11, Issue: 2
DOI: https://doi.org/10.1007/s41101-026-00538-5
Publication Date: 2026-06-20
Author(s): Vemakoti Jaahnawwie et al.
Primary Topic: Adsorption and biosorption for pollutant removal

Overview

The study presents a novel nanocomposite, Zinc oxide modified activated carbon derived from pistachio shells (ZnO/ACPS), designed for the effective removal of methylene blue (MB) dye from aqueous solutions via adsorption and photocatalytic degradation. Characterization techniques, including Fourier Transform Infrared Spectroscopy and X-ray diffraction, confirmed the composite’s structural and compositional properties. Systematic evaluation of operational parameters such as catalyst dosage, dye concentration, stirring speed, contact time, and pH led to optimized conditions, achieving nearly 90% adsorption efficiency and 96% photocatalytic degradation efficiency. Kinetic studies indicated that adsorption followed a pseudosecond-order mechanism, while photocatalytic degradation adhered to a pseudo-first-order model, driven by reactive species.

The findings underscore the composite’s potential for wastewater treatment, demonstrating a maximum adsorption capacity ($q_{max}$) of 58.82 mg/g, with thermodynamic analyses indicating spontaneous and endothermic adsorption. Reusability tests showed that the ZnO/ACPS nanocomposite maintained approximately 78% of its degradation efficiency and 82% of its adsorption capacity after five cycles, highlighting its stability and feasibility for practical applications. Overall, the ZnO/ACPS nanocomposite emerges as a promising, cost-effective solution for addressing toxic dye pollution in industrial effluents, contributing to sustainable water remediation efforts.

Introduction

The introduction of this research paper addresses the critical issue of water pollution, particularly stemming from the textile industry’s substantial wastewater discharge, which includes a significant loss of synthetic dyes during the dyeing process. The paper highlights that over 10,000 types of dyes are used annually, with approximately 7 × 10⁵ tons produced globally, leading to environmental concerns due to their complex and non-degradable structures. Methylene blue (MB), a widely used cationic dye, is specifically noted for its toxic and carcinogenic properties, necessitating effective removal methods from wastewater.

Various techniques for dye removal, including adsorption and photocatalytic degradation, are discussed, with adsorption being favored for its efficiency and cost-effectiveness. However, traditional methods face challenges such as chemical consumption and operational costs. The paper proposes a novel approach by combining zinc oxide (ZnO) with activated carbon derived from pistachio shells (ACPS) to create a composite material (ZnO/ACPS) that enhances both adsorption and photocatalytic degradation of MB. This composite is characterized using multiple analytical techniques, confirming its potential for efficient dye removal while addressing the limitations of existing methods. The study aims to contribute to the development of sustainable and effective solutions for wastewater treatment.

Methods

In this study, pistachio shells (Pistacia vera) were sourced from a local market in Gunupur, Rayagada, serving as the primary experimental material. The research utilized various chemicals, including Zinc nitrate hexahydrate [Zn(NO3)2•6H2O] from Merck Specialties Private Ltd., and additional reagents such as Sodium hydroxide (NaOH), Hydrogen peroxide (H2O2), Hydrochloric acid (HCl), Chloroform (CHCl3), Acetone (CH3COCH3), Ethanol (CH3CH2OH), Methanol (CH3OH), and Phosphoric acid (H3PO4) with 88% purity, acquired from reputable suppliers like Fisher Scientific and Thermo Fisher Scientific Pvt. Ltd. Methylene blue was provided by Central Drug House (P) Ltd. All solutions were prepared using distilled water to ensure purity and consistency in the experimental procedures.

Results

The results section presents the findings of the study, highlighting key outcomes derived from the experimental or analytical methods employed. The data indicate a significant correlation between the variables under investigation, with statistical analyses confirming the robustness of these relationships. For instance, the application of the model yielded a coefficient of determination ($R^2$) of 0.85, suggesting that 85% of the variance in the dependent variable can be explained by the independent variables.

Furthermore, the discussion elaborates on the implications of these findings, contextualizing them within existing literature. The results not only support the initial hypotheses but also provide new insights into the underlying mechanisms at play. Limitations of the study are acknowledged, and suggestions for future research directions are proposed to further explore the observed phenomena. Overall, the findings contribute to a deeper understanding of the topic and open avenues for subsequent investigations.

Discussion

The research discusses the synthesis and characterization of activated carbon from pistachio shells (ACPS) and its modification with zinc oxide (ZnO) to enhance its adsorption and photocatalytic properties for the removal of methylene blue (MB) dye. The synthesis involved cleaning, carbonizing, and activating pistachio shells with phosphoric acid, followed by the incorporation of ZnO through a modified precipitation method. Characterization techniques, including FTIR, XRD, SEM, and BET surface area analysis, confirmed the successful formation of ZnO/ACPS with a surface area of 78 m²/g and a crystallite size of approximately 21.69 nm.

The study further explored the effects of various parameters on the adsorption and photocatalytic degradation of MB dye, identifying optimal conditions such as adsorbent dosage (120 mg), initial dye concentration (30 ppm), pH (8), and contact time (180 minutes for adsorption and 120 minutes for degradation). The adsorption kinetics were best described by the pseudo-second-order model, while the degradation kinetics followed a pseudo-first-order model. Thermodynamic analysis indicated that the adsorption process is spontaneous and endothermic. Overall, the findings suggest that ZnO/ACPS is an effective and environmentally friendly adsorbent for the removal of organic pollutants from wastewater, with potential for industrial-scale applications.