DOI: https://doi.org/10.20998/2522-9052.2026.3.07
تاريخ النشر: 2026-07-05
المؤلف: Bayram İbrahimov وآخرون
الموضوع الرئيسي: تكنولوجيا الشبكات الضوئية
نظرة عامة
تبحث ورقة البحث في مؤشرات كفاءة أنظمة النقل الضوئي التي تستخدم تقنية تعدد الأطوال الموجية لتحسين جودة الاتصال في الشبكات الضوئية. تركز الدراسة على نظام نقل ضوئي يتكون من وحدات ضوئية لاستقبال وإرسال، ومحوّلات، ومسارات ضوئية. تقترح نهجًا جديدًا لبناء طرق حسابية لتقييم مؤشرات الأداء لهذه الأنظمة، خاصة في بيئات الإشارة المعقدة. تم اشتقاق تعبيرات تحليلية رئيسية لتقييم القدرة المتوسطة في القنوات الطيفية، وعامل الضوضاء لمكبرات الصوت الضوئية، ونسبة الإشارة إلى الضوضاء الضوئية (OSNR) عند استخدام الألياف الأحادية القياسية المثلى.
تشير النتائج إلى أن طرق الحساب المقترحة تأخذ في الاعتبار بشكل فعال خوارزميات التشغيل لمكبرات الألياف المشوبة باليربيوم (EDFA)، وOSNR عند المخرج، ومعلمات الضوضاء في الأنظمة الضوئية. أظهر تحليل عددي تم إجراؤه في بيئة Matlab علاقة رسومية بين احتمال أخطاء البت وOSNR المطلوب لاستقبال الإشارة بنجاح عند معدلات بت محددة. تظهر النتائج أن زيادة OSNR المطلوب تتوافق مع انخفاض في احتمال أخطاء البت، خاصة عند تطبيق خوارزميات تصحيح الأخطاء الأمامية. تسهم هذه الدراسة في تقديم رؤى قيمة لتصميم وتحسين الشبكات الضوئية متعددة الخدمات وأنظمة البصريات الحرة باستخدام تقنية تعدد الأطوال الموجية.
مقدمة
تسلط المقدمة الضوء على الطلب المتزايد على الأنظمة الضوئية عالية الأداء في الاتصالات، مدفوعًا بالحاجة إلى معالجة الرسائل ونقلها بكفاءة. لقد سهلت التقدمات في معالجة الإشارات الرقمية (DSP)، والأجهزة الكهروضوئية، والإلكترونيات الراديوية تطوير أنظمة نقل الألياف الضوئية. يتم تعزيز فعالية هذه الأنظمة بشكل أكبر من خلال قدرات المراقبة والكشف الخارجية، والتي تعتبر حاسمة لتقييم الوضع المكاني في البيئات المعقدة. يتيح تكامل المعالجات الدقيقة DSP استخدام تنسيقات تعديل متنوعة، مثل تعديل الطور M-ary وتعديل السعة الرباعية M-ary (M-QAM)، مما يضمن أداءً مستقرًا وسعة خط عالية في الشبكات الضوئية الرقمية.
يؤكد النص على أهمية معالجة الإشارة الضوئية مباشرة داخل مسارات النقل، خاصة من خلال تقنيات مثل تعدد تقسيم الطول الموجي (WDM)، وتعدد تقسيم الطول الموجي الخشن (CWDM)، وتعدد تقسيم الطول الموجي الكثيف (DWDM). تستفيد هذه التقنيات من أطوال موجية متعددة لتعزيز سعة النقل، وتقليل تكاليف البنية التحتية، ودعم أنواع حركة مرور متنوعة، مما يجعلها متعددة الاستخدامات للتطبيقات مثل “خدمات Triple Play.” تهدف الدراسة إلى تحليل مؤشرات الأداء لمسارات النقل الضوئية باستخدام تقنية DWDM، مع التركيز على الكفاءة الطيفية وتأثير تنسيقات التعديل الجديدة مثل تعديل الطور الرباعي التفاضلي (DQPSK) وM-QAM، وبالتالي معالجة الطلبات المتزايدة على النطاق الترددي والخدمات الذكية في الاتصالات الضوئية.
طرق
في هذا القسم، يوضح المؤلفون المنهجيات المستخدمة في تحليل أداء شبكات الاتصالات الضوئية، مع التركيز بشكل خاص على فعالية خوارزميات تصحيح الأخطاء الأمامية (FEC). تبرز الدراسة أن هذه الخوارزميات تعزز بشكل كبير من مناعة الضوضاء ضد تدهور الإشارة بسبب الضوضاء، والانخفاض، والتشويه. يتم قياس كفاءة FEC من خلال الزيادة في الحد الأدنى لنسبة الإشارة إلى الضوضاء، المشار إليها بـ $OSNR_T(\lambda_i)$، المطلوبة لجهاز الاستقبال في المحول لفك تشفير الإشارة بنجاح.
باستخدام صندوق أدوات الاتصالات داخل بيئة Matlab، قام المؤلفون بمحاكاة كفاءة مسارات النقل الضوئية. استخدموا واجهة BERTool الرسومية لتصور العلاقة بين احتمال معدل أخطاء البت (PBER) و$OSNR_T(\lambda_i)$. تشير النتائج، الموضحة في الأشكال المرفقة، إلى أنه مع زيادة $OSNR_T(\lambda_i)$، ينخفض PBER، مما يلبي متطلبات الجودة للاتصالات الضوئية. من الجدير بالذكر أنه تم ملاحظة تحسينات كبيرة في جودة الإشارة عند $OSNR_T(\lambda_i) \geq 5.5 \text{ dB}$ لمعدلات بت تبلغ $V_b(\lambda_i) \geq 2.5 \text{ Gbps}$ و$V_b(\lambda_i) = 100 \text{ Gbps}$. تؤكد النتائج على مزايا استخدام FEC، خاصة مع أنظمة التعديل الأعلى ($M > 16$) ومعدلات الترميز ($R_k = 0.75 < 1$)، والتي تسهم في تعزيز استقرار النقل وسلامة الإشارة.
نقاش
تسلط قسم النقاش في ورقة البحث الضوء على التقدمات في الشبكات الضوئية، خاصة من خلال تقنية تعدد تقسيم الطول الموجي الكثيف (DWDM)، التي تعزز كفاءة أنظمة النقل الضوئي مع تقليل التكاليف التشغيلية. تؤكد الدراسة على أهمية حساب مؤشرات الكفاءة لمسارات النقل الضوئية، مع الأخذ في الاعتبار عوامل مثل قوة الانبعاث العفوي من المكبرات وخصائص الضوضاء لمكبرات الألياف المشوبة باليربيوم (EDFA). توفر التعبيرات المستمدة إطارًا لتقييم أداء هذه الأنظمة، خاصة من حيث نسب الإشارة إلى الضوضاء (SNR) وتأثير الضوضاء على جودة الاتصال.
علاوة على ذلك، يكشف التحليل أن تقنية DWDM تمكن من نقل عدة تدفقات بيانات عبر ألياف ضوئية واحدة من خلال استخدام ترددات مختلفة، مما يزيد بشكل كبير من سعة الشبكة. تعتبر بنية نظام DWDM، التي تشمل مكونات أساسية مثل المجمعات، وEDFA، والفواصل، حاسمة لتحقيق نقل بيانات عالي السرعة على مسافات طويلة. تؤكد النتائج على ضرورة تحسين هذه الأنظمة لمختلف الظروف الجغرافية وتبرز فعالية تنسيقات التعديل الجديدة، مثل M-QAM متعدد المستويات، في تعزيز معدلات نقل البيانات. بشكل عام، تقدم الدراسة نهجًا شاملاً لتقييم وتحسين أداء شبكات الاتصالات الضوئية.
DOI: https://doi.org/10.20998/2522-9052.2026.3.07
Publication Date: 2026-07-05
Author(s): Bayram İbrahimov et al.
Primary Topic: Optical Network Technologies
Overview
The research paper investigates the efficiency indicators of optical transmission systems utilizing wavelength multiplexing technology to enhance communication quality in fiber-optic networks. The study focuses on a fiber-optic transmission system comprising receiving and transmitting optical modules, transponders, and fiber-optic paths. It proposes a novel approach for constructing calculation methods to assess the performance indicators of these systems, particularly in complex signal-noise environments. Key analytical expressions were derived to evaluate the average power in spectral channels, the noise factor of optical amplifiers, and the optical signal-to-noise ratio (OSNR) when employing optimal standard single-mode fiber.
The findings indicate that the proposed calculation methods effectively account for the operational algorithms of erbium-doped fiber amplifiers (EDFA), the OSNR at the output, and the noise parameters in fiber-optic systems. A numerical analysis conducted in the Matlab environment revealed a graphical relationship between the probability of bit errors and the required OSNR for successful signal reception at specified bit rates. The results demonstrate that an increase in the required OSNR correlates with a decrease in the probability of bit errors, particularly when forward error correction algorithms are applied. This research contributes valuable insights for the design and optimization of multiservice optical telecommunication networks and free-space optics systems using wavelength multiplexing technology.
Introduction
The introduction highlights the increasing demand for high-performance optical systems in telecommunications, driven by the need for efficient message processing and transmission. Advances in digital signal processing (DSP), optoelectronic devices, and radio electronics have facilitated the development of fiber-optic transmission systems. The effectiveness of these systems is further enhanced by external monitoring and detection capabilities, which are crucial for spatial situation assessment in complex environments. The integration of DSP microprocessors enables the use of various modulation formats, such as M-ary phase shift keying and M-ary Quadrature Amplitude Modulation (M-QAM), ensuring stable performance and high line capacity in digital fiber-optic networks.
The text emphasizes the significance of optical signal processing directly within transmission paths, particularly through technologies like Wavelength Division Multiplexing (WDM), Coarse WDM (CWDM), and Dense WDM (DWDM). These technologies leverage multiple wavelengths to enhance transmission capacity, reduce infrastructure costs, and support diverse traffic types, making them versatile for applications like “Triple Play Services.” The study aims to analyze the performance indicators of optical transmission paths utilizing DWDM technology, focusing on spectral efficiency and the impact of new modulation formats such as Differential Quadrature Phase Shift Keying (DQPSK) and M-QAM, thereby addressing the growing demands for bandwidth and intelligent services in optical telecommunications.
Methods
In this section, the authors detail the methodologies employed in analyzing the performance of fiber-optic communication networks, particularly focusing on the efficacy of Forward Error Correction (FEC) algorithms. The study highlights that these algorithms significantly enhance noise immunity against signal degradation due to noise, attenuation, and distortion. The efficiency of FEC is quantified by the gain in the minimum signal-to-noise ratio, denoted as $OSNR_T(\lambda_i)$, required for the transponder receiver to successfully interpret the signal.
Utilizing the Communications Toolbox within the Matlab environment, the authors simulated the efficiency of optical transmission paths. They employed the BERTool graphical interface to visualize the relationship between the probability of bit error rate (PBER) and $OSNR_T(\lambda_i)$. The results, illustrated in the accompanying figures, indicate that as $OSNR_T(\lambda_i)$ increases, the PBER decreases, thereby satisfying the quality requirements for fiber-optic communications. Notably, significant improvements in signal quality were observed at $OSNR_T(\lambda_i) \geq 5.5 \text{ dB}$ for bit rates of $V_b(\lambda_i) \geq 2.5 \text{ Gbps}$ and $V_b(\lambda_i) = 100 \text{ Gbps}$. The findings underscore the advantages of employing FEC, particularly with higher modulation schemes ($M > 16$) and coding rates ($R_k = 0.75 < 1$), which contribute to enhanced transmission stability and signal integrity.
Discussion
The discussion section of the research paper highlights the advancements in fiber optic networks, particularly through Dense Wavelength Division Multiplexing (DWDM) technology, which enhances the efficiency of optical transmission systems while reducing operational costs. The study emphasizes the importance of calculating efficiency indicators for optical transmission paths, incorporating factors such as spontaneous emission power from amplifiers and noise characteristics of Erbium-Doped Fiber Amplifiers (EDFA). The derived expressions provide a framework for assessing the performance of these systems, particularly in terms of signal-to-noise ratios (SNR) and the impact of noise on communication quality.
Furthermore, the analysis reveals that DWDM technology enables the transmission of multiple data streams over a single optical fiber by utilizing different frequencies, significantly increasing network capacity. The architecture of the DWDM system, which includes essential components like multiplexers, EDFAs, and demultiplexers, is crucial for achieving high-speed data transmission over long distances. The findings underscore the necessity of optimizing these systems for various geographical conditions and highlight the effectiveness of new modulation formats, such as multi-level M-QAM, in enhancing data transmission rates. Overall, the research presents a comprehensive approach to evaluating and improving the performance of fiber optic communication networks.
