DOI: https://doi.org/10.1038/s41529-026-00874-w
تاريخ النشر: 2026-09-15
المؤلف: Kaustubh Bawane وآخرون
الموضوع الرئيسي: كيمياء الملح المنصهر والعمليات الكهروكيميائية
نظرة عامة
تعتبر تآكل المواد الهيكلية تحديًا كبيرًا في تطوير مفاعلات الملح المنصهر (MSRs)، خاصة بسبب وجود شوائب أيونات المعادن مثل منتجات الانشطار. تدرس هذه الدراسة بشكل خاص تأثير الإوروبيوم في حالته الأكسيدية 3+ (EuCl₃) على سلوك التآكل للنيكل النقي (Ni) وسبائك النيكل-كروم (Ni-20Cr) في بيئة ملح LiCl-KCl المنصهر. باستخدام الطيف الضوئي البصري في الموقع، وقياس الطيف الكتلي بالتحليل الطيفي المقترن بالتحفيز (ICP-MS)، والمجهر الإلكتروني، تكشف الأبحاث أن وجود EuCl₃ يزيد بشكل كبير من التآكل في كلا المادتين.
تشير النتائج إلى أن النيكل النقي Ni يعاني بشكل أساسي من واجهات تآكل مسطحة مع هجمات بين الحبيبات ضحلة عرضية، بينما تعاني سبيكة Ni-20Cr من تآكل بين الحبيبات موضعي شديد يتميز بتسرب انتقائي للكروم واختراق الملح عند حدود الحبوب. ومن الجدير بالذكر أن الدراسة تحدد أيضًا هجوم بلوري فريد داخل الحبيبات على سبيكة Ni-20Cr عند تعرضها للملح المسبب للتآكل. هذه الرؤى ضرورية لفهم تأثيرات شوائب الملح المؤكسدة على آليات التآكل وحركيات الانتشار عند واجهة الملح-المادة، والتي تؤثر في النهاية على تطور الميكروهياكل التآكلية في تطبيقات MSR.
طرق
في هذه الدراسة، تم استخدام الطيف الضوئي البصري في الموقع للتحقيق في سلوك التآكل للنيكل النقي (Ni) ونموذج سبيكة Ni-20Cr في ملح LiCl-KCl المنصهر. تم الحصول على عينات سلكية من كلا المادتين ومعالجتها في صندوق قفازات مملوء بالآرجون لمنع التلوث. شمل الإعداد التجريبي جهاز قياس الطيف الضوئي Cary 5000 متصل عبر كابلات ألياف بصرية عالية الحرارة بفرن مخصص، مما يسمح بإجراء تحليل طيفي عبر الطيف فوق البنفسجي-المرئي-القريب من الأشعة تحت الحمراء (200 إلى 2300 نانومتر). تم إجراء معايرة لجهاز قياس الطيف الضوئي باستخدام مادة مرجعية معتمدة من NIST، مما يضمن قياسات دقيقة لطول الموجة.
تم إعداد عينات الملح المنصهر عن طريق إضافة شوائب من كلوريد النيكل والكروم، بالإضافة إلى كلوريد الإوروبيوم (EuCl3)، لإنشاء توقيعات بصرية مميزة لكل نوع. ومن الجدير بالذكر أنه تم اختيار تركيز 1 wt% من EuCl3 لتسهيل الكشف عن أيونات النيكل والكروم مع الحفاظ على الوضوح في النطاق الطيفي المعني (400-1200 نانومتر). تم إجراء اختبارات التآكل من خلال إدخال أسلاك Ni وNi-20Cr في حاويات تحتوي على الملح المنصهر، مع وبدون العامل المؤكسد EuCl3. تم جمع الأطياف الضوئية في الموقع بشكل دوري كل أربع دقائق، بإجمالي 40 دورة لـ Ni و60 دورة لـ Ni-20Cr، مما يتيح تحليلًا مفصلًا لعمليات التآكل تحت ظروف متغيرة.
نتائج
في هذا القسم، يتم تقديم نتائج قياسات الطيف الضوئي في الموقع خلال تآكل أسلاك Ni وNi-20Cr في ملح LiCl-KCl وLiCl-KCl-1wt%EuCl₃. تكشف الأطياف الضوئية أن قمم الامتصاص التي تتوافق مع أيونات Ni²⁺، والتي تشير إلى ذوبان النيكل، لا يمكن ملاحظتها إلا في خليط LiCl-KCl-1wt%EuCl₃. وهذا يشير إلى أن EuCl₃ يعزز بشكل كبير من الذوبان المؤكسد لكل من أسلاك Ni وNi-20Cr. ومن الجدير بالذكر أن قمم الامتصاص لـ Ni²⁺ أكثر وضوحًا في سلك Ni مقارنة بسبيكة Ni-20Cr، مما يشير إلى معدل ذوبان أعلى للنيكل النقي.
علاوة على ذلك، لم تجد الدراسة أي أيونات Cr²⁺ أو Cr³⁺ قابلة للكشف في الأطياف الضوئية خلال ذوبان سلك Ni-20Cr في أي من خليط الملح. يُعزى هذا الغياب إلى تكوين جزيئات أكسيد الكروم، والتي يتم مناقشتها بمزيد من التفصيل في القسم 3.3. بشكل عام، تبرز هذه النتائج الدور الحاسم لـ EuCl₃ في تسهيل عملية التآكل والسلوكيات المختلفة لـ Ni وسبائكها في بيئات الملح المنصهر.
مناقشة
يقدم قسم المناقشة في ورقة البحث نتائج حول سلوك تآكل النيكل (Ni) وسبائك النيكل-كروم (Ni-20Cr) في الأملاح المنصهرة، مع التركيز بشكل خاص على تأثير إضافة 1 wt% من كلوريد الإوروبيوم (EuCl₃). باستخدام قياس الطيف الكتلي بالتحليل الطيفي المقترن بالتحفيز (ICP-MS)، وُجد أن ذوبان النيكل في ملح LiCl-KCl كان ضئيلاً (0.048 جزء في المليون) مقارنة بتركيز أعلى بكثير (39.8 جزء في المليون) في الملح المحتوي على EuCl₃، مما يشير إلى زيادة تقارب 800 ضعف في الذوبان بسبب المضاف. وبالمثل، بالنسبة لسبيكة Ni-20Cr، كان ذوبان النيكل 0.036 جزء في المليون في الملح الفارغ و22.8 جزء في المليون في ملح EuCl₃، بينما زاد ذوبان الكروم (Cr) من 12.8 جزء في المليون إلى 497 جزء في المليون، مما يظهر تعزيزًا بمقدار 40 ضعفًا. تتماشى النتائج مع الخصائص الكهروكيميائية للكروم، الذي يميل أكثر إلى التسرب الانتقائي بسبب طبيعته الأقل نبلاً مقارنة بالنيكل.
كشفت التوصيفات بعد التآكل باستخدام المجهر الإلكتروني عن تآكل بين الحبيبات واختراق الملح في كلا السبيكتين، مع ملاحظة تقسيم كبير للعناصر. تشير وجود الأكسجين في مناطق الملح إلى مشاركة قوية للرطوبة في عملية التآكل، مما يمكن أن يعزز معدلات التآكل. كما تسلط الدراسة الضوء على الجوانب الديناميكية الحرارية لتفاعلات التآكل، موضحة أنه بينما يذوب كل من النيكل والكروم بشكل تلقائي في وجود EuCl₃، يظهر الكروم ميلًا أعلى للذوبان. تُعزى معدلات التآكل المتسارعة في الملح المحتوي على EuCl₃ إلى التفاعلات الحمراء السريعة والعكسية التي تشمل زوج Eu³⁺/Eu²⁺، مما يسهل نقل الإلكترونات بسرعة. تختتم الورقة بالقول إن التفاعل المعقد بين الديناميكا الحرارية، ونقل الكتلة، والتغيرات الميكروهيكلية يؤثر بشكل كبير على آليات التآكل في الأملاح المنصهرة، مما يستدعي مزيدًا من التحقيق لفهم هذه العمليات بشكل كامل.
DOI: https://doi.org/10.1038/s41529-026-00874-w
Publication Date: 2026-09-15
Author(s): Kaustubh Bawane et al.
Primary Topic: Molten salt chemistry and electrochemical processes
Overview
The corrosion of structural materials poses a significant challenge in the development of molten salt reactors (MSRs), particularly due to the presence of metal ion impurities such as fission products. This study specifically examines the impact of europium in its 3+ oxidation state (EuCl₃) on the corrosion behavior of pure nickel (Ni) and a nickel-chromium alloy (Ni-20Cr) in a molten LiCl-KCl eutectic environment. Utilizing in situ optical spectroscopy, inductively coupled plasma mass spectrometry (ICP-MS), and electron microscopy, the research reveals that the presence of EuCl₃ significantly exacerbates corrosion in both materials.
The findings indicate that pure Ni primarily experiences planar corrosion fronts with occasional shallow intergranular attacks, while the Ni-20Cr alloy suffers from severe localized intergranular corrosion characterized by selective chromium leaching and salt penetration at grain boundaries. Notably, the study also identifies a unique intragranular crystallographic attack on the Ni-20Cr alloy when exposed to the corrosive salt. These insights are essential for understanding the effects of oxidizing salt impurities on corrosion mechanisms and diffusion kinetics at the salt-material interface, which ultimately influence the evolution of corrosion microstructures in MSR applications.
Methods
In this study, in situ optical spectroscopy was employed to investigate the corrosion behavior of pure nickel (Ni) and a Ni-20Cr model alloy in molten LiCl-KCl eutectic salt. Wire samples of both materials were sourced and handled in an argon-filled glovebox to prevent contamination. The experimental setup included a Cary 5000 spectrophotometer connected via high-temperature fiber optic cables to a custom furnace, allowing for spectral analysis across the ultraviolet-visible-near infrared spectrum (200 to 2300 nm). Calibration of the spectrophotometer was performed using a NIST-certified reference material, ensuring accurate wavelength measurements.
The molten salt samples were prepared by doping the LiCl-KCl eutectic with various concentrations of nickel and chromium chlorides, as well as europium chloride (EuCl3), to establish distinct optical signatures for each species. Notably, a concentration of 1 wt% EuCl3 was chosen to facilitate the detection of nickel and chromium ions while maintaining clarity in the spectral range of interest (400-1200 nm). Corrosion tests were conducted by introducing Ni and Ni-20Cr wires into cuvettes containing the molten salt, with and without the oxidizing agent EuCl3. In situ optical spectra were collected cyclically every four minutes, totaling 40 cycles for Ni and 60 cycles for Ni-20Cr, enabling a detailed analysis of the corrosion processes under varying conditions.
Results
In this section, the results of in situ optical spectroscopy measurements during the corrosion of Ni and Ni-20Cr wires in molten LiCl-KCl and LiCl-KCl-1wt%EuCl₃ salts are presented. The optical spectra reveal that absorption peaks corresponding to Ni²⁺ ions, indicative of Ni dissolution, are only observable in the LiCl-KCl-1wt%EuCl₃ mixture. This suggests that EuCl₃ significantly enhances the oxidative dissolution of both Ni and Ni-20Cr wires. Notably, the absorption peaks for Ni²⁺ are more pronounced in the Ni wire compared to the Ni-20Cr alloy, indicating a higher dissolution rate for pure Ni.
Furthermore, the study finds no detectable Cr²⁺ or Cr³⁺ ions in the optical spectra during the dissolution of the Ni-20Cr wire in either salt mixture. This absence is attributed to the formation of chromium oxide particles, which is discussed in more detail in Section 3.3. Overall, these findings highlight the critical role of EuCl₃ in facilitating the corrosion process and the differing behaviors of Ni and its alloy in molten salt environments.
Discussion
The discussion section of the research paper presents findings on the corrosion behavior of nickel (Ni) and nickel-chromium (Ni-20Cr) alloys in molten salts, particularly focusing on the effects of adding 1 wt% europium chloride (EuCl₃). Using inductively coupled plasma mass spectrometry (ICP-MS), it was found that the dissolution of Ni in LiCl-KCl salt was minimal (0.048 ppm) compared to a significantly higher concentration (39.8 ppm) in the EuCl₃-containing salt, indicating an approximately 800-fold increase in dissolution due to the additive. Similarly, for the Ni-20Cr alloy, Ni dissolution was 0.036 ppm in the blank salt and 22.8 ppm in the EuCl₃ salt, while chromium (Cr) dissolution increased from 12.8 ppm to 497 ppm, demonstrating a 40-fold enhancement. The findings align with the electrochemical properties of Cr, which is more prone to selective leaching due to its less noble nature compared to Ni.
Post-corrosion characterization using electron microscopy revealed intergranular corrosion and salt penetration in both alloys, with significant elemental partitioning observed. The presence of oxygen in the salt regions suggests a strong involvement of moisture in the corrosion process, which can enhance corrosion rates. The study also highlights the thermodynamic aspects of corrosion reactions, showing that while both Ni and Cr dissolve spontaneously in the presence of EuCl₃, Cr exhibits a higher tendency to dissolve. The accelerated corrosion rates in the EuCl₃-containing salt are attributed to the fast and reversible redox reactions involving the Eu³⁺/Eu²⁺ couple, which facilitate rapid electron transfer. The paper concludes that the complex interplay of thermodynamics, mass transport, and microstructural changes significantly influences the corrosion mechanisms in molten salts, necessitating further investigation to fully understand these processes.
