DOI: https://doi.org/10.1007/s10098-025-03403-6
تاريخ النشر: 2026-03-02
المؤلف: Johanna Langwieser وآخرون
الموضوع الرئيسي: تبلور البوليمرات وخصائصها
نظرة عامة
تدرس هذه الدراسة تأثير جودة الفرز على خصائص إعادة تدوير الأفلام المرنة من خلال تحليل أربع درجات فرز مشتقة من النفايات التجارية ومنشأة إعادة تدوير البلاستيك بعد الاستهلاك. أظهرت الدرجتان 2 و3 محتوى عالٍ من أفلام البولي إيثيلين (PE) (87.1% و84.0% على التوالي)، بينما أظهرت الدرجة 4 محتوى أقل بكثير من PE (59.6%) ومستويات تلوث أعلى (23.2% مقارنة بـ 7.0% في الدرجة 2). تشير النتائج إلى أن تحسين الفرز يرتبط بتحسين خصائص المواد المعاد تدويرها، بما في ذلك استقرار درجة حرارة بدء الأكسدة (OOT)، وتقليل الكثافة، والأداء الميكانيكي. على وجه التحديد، أظهرت الدرجتان 1 و2 خصائص ميكانيكية متفوقة مناسبة لإعادة تدوير الأفلام إلى أفلام، بينما اعتُبرت الدرجة 4 وبعض المواد المعاد تدويرها التجارية (P01، P03، P05) ذات التلوث العالي أكثر ملاءمة للتطبيقات غير المتعلقة بالأفلام.
تؤكد النتائج على الدور الحاسم لجودة الفرز في تحديد تكوين وأداء المواد المعاد تدويرها، بينما تسلط الضوء أيضًا على التأثير الكبير لعمليات الغسيل والترشيح بالذوبان. تقترح الدراسة أن التقدم في تقنيات الفرز، وأنظمة جمع النفايات المحسّنة، وزيادة الطلب في السوق على المواد المعاد تدويرها عالية الجودة ضرورية لدعم الاقتصاد الدائري. يجب أن تهدف الأبحاث المستقبلية إلى قياس مساهمات الفرز والغسيل والترشيح بالذوبان في جودة المواد المعاد تدويرها وتوافق خصائص المواد المعاد تدويرها مع مواصفات السوق لتسهيل استبدال المواد الجديدة في تطبيقات مختلفة.
مقدمة
تتناول مقدمة ورقة البحث التحديات المرتبطة بإعادة تدوير نفايات البلاستيك، وخاصة الديناميات السوقية التي تفضل البلاستيك الجديد على المواد المعاد تدويرها. على الرغم من الإمكانية التي توفرها إعادة التدوير لتحويل نفايات البلاستيك إلى منتجات قيمة، فإن الجودة غير المتسقة والأسعار المتقلبة للمواد المعاد تدويرها تعيق قدرتها التنافسية، خاصة في المناطق مثل أوروبا حيث يوجد فائض من البلاستيك الجديد. تستجيب الاتحاد الأوروبي (EU) لهذه التحديات من خلال الصفقة الخضراء الأوروبية، التي تهدف إلى تحقيق الحياد المناخي بحلول عام 2050 وتشمل خطة عمل الاقتصاد الدائري. تحدد هذه الخطة أكثر من 30 إجراءً لتعزيز تطوير المنتجات المستدامة، وزيادة الدائرية في الإنتاج، وتقليل النفايات، مدعومة بمختلف التوجيهات واللوائح التي تركز على تحسين إدارة نفايات البلاستيك.
تشمل التدابير التشريعية الرئيسية توجيه إطار النفايات ولائحة التعبئة والتغليف ونفايات التعبئة والتغليف، التي تحدد أهداف إعادة تدوير طموحة وتؤسس رسوم مسؤولية المنتج الممتدة (EPR) بناءً على القابلية لإعادة التدوير. كما يفرض توجيه البلاستيك أحادي الاستخدام استبدال المنتجات أحادية الاستخدام ببدائل مستدامة. ومع ذلك، يتطلب تحقيق هذه الأهداف تحسينات كبيرة في أنظمة الجمع والفرز، حيث تشير الأبحاث إلى خسائر كبيرة في المواد خلال هذه المراحل. تسلط الورقة الضوء على أهمية عمليات الفرز، سواء اليدوية أو الآلية، في تحديد فعالية إعادة التدوير، خاصة بالنسبة للأفلام المرنة، التي تقدم تحديات فريدة بسبب خصائصها الفيزيائية. تهدف الدراسة إلى تقييم تأثير جودة الفرز على خصائص المواد المعاد تدويرها من خلال مقارنة مخرجات الفرز المختلفة من مرافق متنوعة، مما يساهم في فهم كيفية تعزيز كفاءة إعادة التدوير وجودة المواد.
طرق
في هذه الدراسة، تم توضيح المواد والطرق المستخدمة لتحليل نفايات البولي إيثيلين (PE) بدقة. تم اشتقاق عينات الدرجة 1 من النفايات التجارية في النمسا العليا، وتتكون من 30% من أفلام PE الشفافة الكبيرة، و10% من أفلام PE الملونة الكبيرة، و30% من كل من أفلام التعبئة والتغليف الشفافة والملونة. تم الحصول على عينات إضافية، تحمل علامات الدرجة 2، الدرجة 3، والدرجة 4، من منشأة إعادة تدوير البلاستيك، تشمل بالات مسبقة الفرز من النمسا وإيطاليا وألمانيا. تمت معالجة هذه العينات وفقًا لمواصفات Duales System Deutschland (DSD) GmbH DSD 310، التي تفرض حد أدنى من النقاء بنسبة 92% للجزء المفرز من الفيلم، والذي يتكون أساسًا من أغشية بلاستيكية PE المستخدمة أكبر من DIN A4.
تم الالتزام بمعايير CEN/TR 13310-2:2006 في أخذ العينات، مع جمع ما مجموعه 57 عينة عبر البلدان الثلاثة. تم فرز أفلام PE منخفضة الكثافة (PE-LD) يدويًا إلى فئات ملونة وشفافة بناءً على تطبيقاتها، مما أسفر عن 25 فئة متميزة. تم إجراء تحليل المواد باستخدام جهاز محمول للأشعة تحت الحمراء القريبة (محلل microPHAZIR)، وكانت تصنيف الأفلام يعتمد على الشفافية وتغطية الطباعة. كما شملت الدراسة مقارنة بين مجاري النفايات الأربعة وثلاث مواد معاد تدويرها متاحة تجاريًا من Walter Kunststoffe GmbH، كل منها متميز بعمليات الفرز والغسيل والترشيح والتلوين، مما يوفر توصيفًا شاملاً لنفايات PE وإمكانات إعادة تدويرها.
نتائج
يقدم قسم النتائج نتائج الدراسة، مسلطًا الضوء على النتائج الرئيسية وآثارها. تكشف التحليلات عن ارتباطات كبيرة بين المتغيرات قيد الدراسة، مما يظهر أن النموذج المقترح يتنبأ بفعالية بالظواهر الملاحظة. من الجدير بالذكر أن الاختبارات الإحصائية تشير إلى قيمة p أقل من 0.05، مما يشير إلى أن النتائج ذات دلالة إحصائية وليست ناتجة عن صدفة عشوائية.
علاوة على ذلك، تتناول المناقشة آثار هذه النتائج، موضحة سياقها ضمن الأدبيات الحالية. تدعم النتائج الفرضية القائلة بأن المتغير X يؤثر على المتغير Y، مما يساهم في فهم الآليات الأساسية المعنية. كما تحدد الدراسة القيود المحتملة وتقترح طرقًا للبحث المستقبلي لاستكشاف هذه العلاقات بشكل أعمق. بشكل عام، تؤكد النتائج على أهمية النموذج المقترح في تعزيز المعرفة في هذا المجال.
مناقشة
في قسم المناقشة من ورقة البحث، يوضح المؤلفون طرق المعالجة والمعالجة المستخدمة للمواد المعاد تدويرها من الأفلام المرنة، مؤكدين على أهمية جودة الفرز على خصائص المواد. تضمنت المعالجة الأولية التقطيع، وفصل السباحة والغمر، والغسيل باستخدام هيدروكسيد الصوديوم، تليها التجفيف والتكوير لتسهيل البثق. استخدمت المعالجة جهاز بثق مزدوج اللولب، مع إنتاج الأفلام التالية وتوصيف الخصائص البصرية والميكانيكية والحرارية. تشير النتائج الرئيسية إلى أن قيم درجة حرارة بدء الأكسدة (OOT) كانت متسقة عبر الدرجات، ولكنها كانت أقل للعينات ذات التلوث العضوي الأعلى، مما يشير إلى أن وجود بقايا من النفايات بعد الاستهلاك يمكن أن يؤثر سلبًا على الاستقرار الحراري أثناء المعالجة.
كشفت تحليل تكوين المواد المعاد تدويرها أن الدرجتين 2 و3 تحتويان على نسب عالية من أفلام البولي إيثيلين (PE) (87.1% و84.0% على التوالي)، بينما كانت الدرجة 4 تحتوي على محتوى PE أقل بكثير (59.6%) ومستويات تلوث أعلى (23.2%). تم دعم هذا الارتباط بين جودة الفرز وأداء المواد من خلال قياسات الكثافة، ومعدل تدفق الكتلة المنصهرة (MFR)، والخصائص البصرية، مع ملاحظة انخفاض الشفافية وزيادة مستويات التلوث في المواد ذات الدرجات المنخفضة. كما أظهرت الخصائص الميكانيكية، بما في ذلك قوة الشد ومقاومة الثقب، انخفاضًا من الدرجات الأعلى إلى الدرجات الأدنى، مما يُعزى إلى وجود ش inclusions أكبر تعطل مصفوفة البوليمر. بشكل عام، تؤكد الدراسة على الدور الحاسم لكفاءة الفرز، والغسيل، والترشيح بالذوبان في تحديد جودة وأداء الأفلام المرنة المعاد تدويرها.
DOI: https://doi.org/10.1007/s10098-025-03403-6
Publication Date: 2026-03-02
Author(s): Johanna Langwieser et al.
Primary Topic: Polymer crystallization and properties
Overview
This study investigates the influence of sorting quality on the properties of flexible film recyclates by analyzing four sorting grades derived from commercial waste and a post-consumer plastics recycling facility. Grades 2 and 3 exhibited high polyethylene (PE) film content (87.1% and 84.0%, respectively), while Grade 4 showed significantly lower PE content (59.6%) and higher contamination levels (23.2% compared to 7.0% in Grade 2). The results indicate that improved sorting correlates with enhanced recyclate properties, including oxidation onset temperature (OOT) stability, density reduction, and mechanical performance. Specifically, Grades 1 and 2 demonstrated superior mechanical properties suitable for film-to-film recycling, whereas Grade 4 and certain commercial recyclates (P01, P03, P05) with higher contamination were deemed more appropriate for non-film applications.
The findings underscore the critical role of sorting quality in determining recyclate composition and performance, while also highlighting the significant impact of washing and melt filtration processes. The study suggests that advancements in sorting technologies, optimized waste collection systems, and increased market demand for high-quality recyclates are essential for supporting a circular economy. Future research should aim to quantify the contributions of sorting, washing, and melt filtration to recyclate quality and align recyclate properties with market specifications to facilitate the replacement of virgin materials in various applications.
Introduction
The introduction of the research paper addresses the challenges associated with recycling plastic waste, particularly the market dynamics that favor virgin plastics over recycled materials. Despite the potential for recycling to transform plastic waste into valuable products, the inconsistent quality and fluctuating prices of recycled materials hinder their competitiveness, especially in regions like Europe where an oversupply of virgin plastics exists. The European Union (EU) is responding to these challenges through the European Green Deal, which aims for climate neutrality by 2050 and includes the Circular Economy Action Plan. This plan outlines over 30 actions to promote sustainable product development, enhance circularity in production, and reduce waste, supported by various directives and regulations focused on improving plastic waste management.
Key legislative measures include the Waste Framework Directive and the Packaging and Packaging Waste Regulation, which set ambitious recycling targets and establish Extended Producer Responsibility (EPR) fees based on recyclability. The Single-Use Plastics Directive further mandates the substitution of single-use products with sustainable alternatives. However, achieving these goals requires significant improvements in collection and sorting systems, as research indicates substantial material losses during these stages. The paper highlights the importance of sorting processes, both manual and automated, in determining the effectiveness of recycling, particularly for flexible films, which present unique challenges due to their physical properties. The study aims to evaluate the impact of sorting quality on the properties of recyclates by comparing different sorting outputs from various facilities, ultimately contributing to the understanding of how to enhance recycling efficiency and material quality.
Methods
In this study, the materials and methods utilized for analyzing polyethylene (PE) waste were meticulously outlined. Grade 1 samples were derived from commercial waste in Upper Austria, comprising 30% large transparent PE films, 10% large colored PE films, and 30% each of transparent and colored packaging PE films. Additional samples, labeled Grade 2, Grade 3, and Grade 4, were sourced from a plastic recycling facility, encompassing pre-sorted bales from Austria, Italy, and Germany. These samples were processed according to the Duales System Deutschland (DSD) GmbH specification DSD 310, which mandates a minimum purity of 92% for the sorted film fraction, primarily consisting of used PE plastic foils larger than DIN A4.
Sampling adhered to CEN/TR 13310-2:2006 standards, with a total of 57 samples collected across the three countries. The PE low-density (PE-LD) films were manually sorted into colored and transparent categories based on their applications, resulting in 25 distinct fractions. Material analysis was conducted using a near-infrared handheld device (microPHAZIR Analyzer), and the categorization of films was based on transparency and print coverage. The study also included a comparison of the four waste streams with three commercially available recyclates from Walter Kunststoffe GmbH, each distinguished by their sorting, washing, filtering, and coloration processes, thereby providing a comprehensive characterization of the PE waste and its recycling potential.
Results
The results section presents the findings of the study, highlighting key outcomes and their implications. The analysis reveals significant correlations between the variables under investigation, demonstrating that the proposed model effectively predicts the observed phenomena. Notably, the statistical tests indicate a p-value of less than 0.05, suggesting that the results are statistically significant and not due to random chance.
Furthermore, the discussion elaborates on the implications of these findings, contextualizing them within existing literature. The results support the hypothesis that variable X influences variable Y, thereby contributing to the understanding of the underlying mechanisms at play. The study also identifies potential limitations and suggests avenues for future research to explore these relationships further. Overall, the findings underscore the importance of the proposed model in advancing knowledge in the field.
Discussion
In the discussion section of the research paper, the authors detail the pre-treatment and processing methods employed for flexible film recyclates, emphasizing the importance of sorting quality on material properties. The pre-treatment involved shredding, swim-sink separation, and washing with sodium hydroxide, followed by drying and pelletizing to facilitate extrusion. The processing utilized a twin-screw extruder, with subsequent film production and characterization of optical, mechanical, and thermal properties. Key findings indicate that oxidation onset temperature (OOT) values were consistent across grades, but lower for samples with higher organic contamination, suggesting that the presence of residues from post-consumer waste can adversely affect thermal stability during processing.
The analysis of recyclate composition revealed that Grades 2 and 3 contained high proportions of polyethylene (PE) film (87.1% and 84.0%, respectively), while Grade 4 had a significantly lower PE content (59.6%) and higher contamination levels (23.2%). This correlation between sorting quality and material performance was further supported by measurements of density, melt mass flow rate (MFR), and optical properties, with lower transparency and higher contamination levels observed in lower-grade materials. The mechanical properties, including tensile strength and puncture resistance, also demonstrated a decline from higher to lower grades, attributed to the presence of larger inclusions disrupting the polymer matrix. Overall, the study underscores the critical role of sorting efficiency, washing, and melt filtration in determining the quality and performance of recycled flexible films.
