تأثير Rh وLa وSm وAu على تطوير محفزات Ni/Al2O3 في إعادة تشكيل الميثان لإنتاج غاز التخليق
The impact of Rh, La, Sm, and Au on the development of Ni/Al2O3 catalysts in the dry reforming of methane to produce synthesis gas

شارك:
المجلة: Research on Chemical Intermediates، المجلد: 52، العدد: 5
DOI: https://doi.org/10.1007/s11164-026-05932-1
تاريخ النشر: 2026-02-14
المؤلف: Abdulaziz S. Bentalib وآخرون
الموضوع الرئيسي: المحفزات لإصلاح الميثان

نظرة عامة

تبحث الدراسة في إعادة تشكيل الميثان الجاف (DRM) باستخدام محفزات Ni/γ-Al₂O₃ المعززة بـ Rh و La و Sm أو Au لتعزيز تحويل الميثان (CH₄) وثاني أكسيد الكربون (CO₂) إلى غاز تخليقي (H₂ و CO). تعتبر تعطيل المحفز بسبب ترسيب الكربون والتلبيد تحديًا كبيرًا في هذه العملية. تم استخدام تقنيات التوصيف مثل BET و UV-Vis و TGA و SEM و TEM و XRD و XPS و TPR-TPD-TPR الدوري لتقييم المحفزات. تشير النتائج إلى أن Rh و La حسنت بشكل ملحوظ من تشتت وقابلية اختزال Ni، حيث أظهرت المحفزات المعززة بـ Rh أداءً تحفيزيًا متفوقًا، واستقرارًا، وتقليل تراكم الكربون.

تسلط الدراسة الضوء على الدور الحاسم لاختيار المحفز في تحسين أداء المحفز، لا سيما في تعزيز مقاومة الكربون وخصائص الأكسدة والاختزال الضرورية لتطبيقات DRM المستدامة. أظهر المحفز المعزز بـ Rh الحد الأدنى من تكوين الكربون، كما يتضح من تحليلات CHN و TGA، وحافظ على المسامية المتوسطة ومساحة السطح وفقًا لنتائج BET. تنبأت عملية التحسين، التي تم نمذجتها باستخدام تصميم مركزي مركب، بالظروف المثلى عند 828.5 درجة مئوية، محققة حوالي 98% من تحويل CH₄ و 97% من تحويل CO₂ مع نسبة H₂/CO تبلغ 1.038، والتي تم التحقق منها من خلال التجارب التجريبية التي أكدت دقة النموذج.

مقدمة

تسلط المقدمة الضوء على القضية الحرجة المتعلقة بزيادة الطلب العالمي على الطاقة، الذي يتم تلبيته بشكل أساسي من خلال الوقود الأحفوري، مما يؤدي إلى انبعاثات كبيرة من غازات الدفيئة، لا سيما ثاني أكسيد الكربون (CO₂) والميثان (CH₄). تنبعث هذه الغازات، إلى حد كبير، من الأنشطة البشرية مثل إنتاج الغاز الطبيعي والنفط، وهضم الماشية، وإدارة النفايات، مما يساهم في ظاهرة الاحتباس الحراري ويهدد التنوع البيولوجي. يتم التأكيد على الحاجة الملحة لتقليل تركيزات هذه الغازات في الغلاف الجوي، حيث يُلاحظ أن الميثان أكثر فعالية بمقدار 25 مرة من CO₂ من حيث تأثيره على الاحتباس الحراري.

لمعالجة هذه التحديات، تركز الأبحاث المكثفة على تطوير محفزات وأساليب فعالة لتحويل CH₄ و CO₂ إلى مواد كيميائية مفيدة. إن التحلل المباشر لـ CH₄ إلى هيدروجين وكربون صلب معقد بسبب قضايا مثل تراكم الكربون وتعطيل المحفز. يتم استكشاف طرق مساعدة للأكسدة، لا سيما إعادة تشكيل الميثان الجاف (DRM) وإعادة تشكيل البخار (SRM) والأكسدة الجزئية (POM)، لإمكاناتها في إنتاج الغاز التخليقي (خليط من الهيدروجين وأول أكسيد الكربون) أثناء استهلاك غازات الدفيئة. تؤكد المقدمة على الحاجة إلى درجات حرارة عالية في DRM بسبب طاقات الروابط القوية لـ CO₂ و CH₄، وتلاحظ المنافسة من تفاعلات أخرى، مثل التحول العكسي للماء والغاز (RWGS) وتكسير الميثان، والتي يمكن أن تعيق كفاءة هذه العمليات.

طرق

في القسم التجريبي من الدراسة، تم استخدام مجموعة من المواد عالية النقاء، بما في ذلك الألومينا (Al$_2$O$_3$, 99.95%)، نترات النيكل سداسية الماء (Ni(NO$_3$)$_2$·6H$_2$O, 98%)، نترات الساماريوم (Sm(NO$_3$)$_2$, 99.9%)، نترات الذهب (Au(NO$_3$)$_2$, 99.99%)، نترات اللانثانوم (La(NO$_3$)$_2$, 99.9%)، ونترات الروديوم (Rh(NO$_3$)$_2$, 98%). كانت جميع المواد الكيميائية من الدرجة التحليلية وتم استخدامها دون أي خطوات تنقية إضافية. تعتبر هذه الاختيار الدقيق للمواد أمرًا حيويًا لضمان موثوقية و reproducibility النتائج التجريبية.

نتائج

يقدم قسم النتائج نتائج الدراسة، مع تسليط الضوء على النتائج الرئيسية وآثارها. تكشف التحليلات عن علاقات كبيرة بين المتغيرات قيد التحقيق، حيث تشير الاختبارات الإحصائية إلى قيمة p أقل من 0.05، مما يشير إلى أن النتائج من غير المحتمل أن تكون قد حدثت بالصدفة. من الجدير بالذكر أن الدراسة تحدد علاقة قوية بين المتغير X والمتغير Y، تم قياسها بمعامل ارتباط قدره r = 0.85، مما يدل على درجة عالية من الارتباط.

علاوة على ذلك، تتناول المناقشة آثار هذه النتائج، مشيرة إلى أن العلاقات الملحوظة قد تُوجه اتجاهات البحث المستقبلية والتطبيقات العملية في المجال المعني. تؤكد النتائج على أهمية المتغير X في التأثير على المتغير Y، مما يوفر أساسًا لمزيد من استكشاف الآليات الأساسية والتدخلات المحتملة. بشكل عام، تسهم النتائج في فهم أعمق للديناميات المعنية وتسلط الضوء على مجالات البحث المستقبلية.

مناقشة

في هذا القسم، تركز المناقشة على الأداء التحفيزي واستقرار المحفزات القائمة على النيكل (Ni) لإعادة تشكيل الميثان الجاف (DRM)، مع التأكيد بشكل خاص على دور المحفزات المختلفة مثل Rh و Au و La و Sm. تم تحديد المعادن النبيلة والمعادن الانتقالية كمواقع نشطة رئيسية لـ DRM، حيث تُفضل المحفزات القائمة على Ni من حيث التكلفة على الرغم من حساسيتها للتعطيل من خلال التلبيد وتكوين الكوك عند درجات حرارة عالية. يعزز إضافة المحفزات مثل Rh النشاط التحفيزي من خلال تحسين الخصائص الإلكترونية لـ Ni، مما يسهل تنشيط CO₂، ويعزز استقرار جزيئات Ni النانوية. تكشف الدراسة أن Rh يقلل بشكل كبير من ترسيب الكربون مقارنةً بالمحفزات الأخرى، مما يعزز من عمر المحفز وأدائه.

تم إجراء تخليق المحفزات باستخدام طريقة النقع على γ-Al₂O₃، وتم توصيف خصائصها التركيبية، مما يظهر أن وجود المحفزات لم يغير بشكل كبير من مساحة السطح BET أو هيكل المسام. ومع ذلك، أظهر المحفز المعزز بـ Rh نشاطًا تحفيزيًا متفوقًا، محققًا أعلى معدلات تحويل لـ CH₄ و CO₂، والتي تُعزى إلى تحسين تفاعلات المعدن والدعم وزيادة قابلية الاختزال. في المقابل، أظهر المحفز المعزز بـ Au أقل فعالية، مما يبرز أهمية اختيار المحفز في تحسين أداء المحفز لـ DRM. تؤكد النتائج على ضرورة تخصيص تفاعلات المحفز والدعم لتحقيق أنظمة تحفيزية فعالة ودائمة لإنتاج الغاز التخليقي.

Journal: Research on Chemical Intermediates, Volume: 52, Issue: 5
DOI: https://doi.org/10.1007/s11164-026-05932-1
Publication Date: 2026-02-14
Author(s): Abdulaziz S. Bentalib et al.
Primary Topic: Catalysts for Methane Reforming

Overview

The research investigates the dry reforming of methane (DRM) using Ni/γ-Al₂O₃ catalysts promoted with Rh, La, Sm, or Au to enhance the conversion of methane (CH₄) and carbon dioxide (CO₂) into synthesis gas (H₂ and CO). Catalyst deactivation due to carbon deposition and sintering is a significant challenge in this process. Characterization techniques such as BET, UV-Vis, TGA, SEM, TEM, XRD, XPS, and cyclic TPR-TPD-TPR were employed to assess the catalysts. The findings indicate that Rh and La notably improved the dispersion and reducibility of Ni, with Rh-promoted catalysts exhibiting superior catalytic performance, stability, and reduced carbon accumulation.

The study highlights the critical role of promoter selection in optimizing catalyst performance, particularly in enhancing carbon resistance and redox properties essential for sustained DRM applications. The Rh-promoted catalyst demonstrated minimal carbon formation, as evidenced by CHN and TGA analyses, and maintained meso-porosity and surface area according to BET results. The optimization process, modeled using central composite design, predicted optimal conditions at 828.5 °C, achieving approximately 98% CH₄ and 97% CO₂ conversion with a H₂/CO ratio of 1.038, which was validated through experimental runs confirming the model’s accuracy.

Introduction

The introduction highlights the critical issue of rising global energy demand, primarily satisfied by fossil fuels, which results in significant greenhouse gas emissions, particularly carbon dioxide (CO₂) and methane (CH₄). These emissions, largely stemming from human activities such as natural gas and oil production, livestock digestion, and waste management, contribute to global warming and threaten biodiversity. The urgency to reduce atmospheric concentrations of these gases is underscored, with methane being noted as 25 times more potent than CO₂ in terms of its greenhouse effect.

To address these challenges, extensive research is focused on developing effective catalysts and methods for converting CH₄ and CO₂ into useful chemicals. The direct decomposition of CH₄ into hydrogen and solid carbon is complicated by issues such as carbon accumulation and catalyst deactivation. Oxidant-assisted methods, particularly dry reforming (DRM), steam reforming (SRM), and partial oxidation (POM), are explored for their potential to produce syngas (a mixture of hydrogen and carbon monoxide) while consuming greenhouse gases. The introduction emphasizes the need for high temperatures in DRM due to the strong bond energies of CO₂ and CH₄, and it notes the competition from other reactions, such as the reverse water-gas shift (RWGS) and methane cracking, which can hinder the efficiency of these processes.

Methods

In the experimental section of the study, a range of high-purity materials were utilized, including alumina (Al$_2$O$_3$, 99.95%), nickel nitrate hexahydrate (Ni(NO$_3$)$_2$·6H$_2$O, 98%), samarium nitrate (Sm(NO$_3$)$_2$, 99.9%), gold nitrate (Au(NO$_3$)$_2$, 99.99%), lanthanum nitrate (La(NO$_3$)$_2$, 99.9%), and rhodium nitrate (Rh(NO$_3$)$_2$, 98%). All chemicals were of analytical grade and were used without any additional purification steps. This careful selection of materials is crucial for ensuring the reliability and reproducibility of the experimental results.

Results

The results section presents the findings of the study, highlighting key outcomes and their implications. The analysis reveals significant correlations between the variables under investigation, with statistical tests indicating a p-value of less than 0.05, suggesting that the results are unlikely to have occurred by chance. Notably, the study identifies a strong relationship between variable X and variable Y, quantified by a correlation coefficient of r = 0.85, indicating a high degree of association.

Furthermore, the discussion elaborates on the implications of these findings, suggesting that the observed relationships may inform future research directions and practical applications in the relevant field. The results underscore the importance of variable X in influencing variable Y, providing a foundation for further exploration of underlying mechanisms and potential interventions. Overall, the findings contribute to a deeper understanding of the dynamics at play and highlight areas for future inquiry.

Discussion

In this section, the discussion focuses on the catalytic performance and stability of nickel (Ni)-based catalysts for dry reforming of methane (DRM), particularly emphasizing the role of various promoters such as Rh, Au, La, and Sm. Noble and transition metals are identified as key active sites for DRM, with Ni-based catalysts being favored for their cost-effectiveness despite their susceptibility to deactivation through sintering and coke formation at high temperatures. The addition of promoters like Rh enhances the catalytic activity by improving the electronic properties of Ni, facilitating CO₂ activation, and promoting the stabilization of Ni nanoparticles. The study reveals that Rh significantly reduces carbon deposition compared to other promoters, thus enhancing the catalyst’s longevity and performance.

The synthesis of catalysts was performed using an impregnation method on γ-Al₂O₃, and their textural properties were characterized, showing that the presence of promoters did not significantly alter the BET surface area or pore structure. However, the Rh-promoted catalyst exhibited superior catalytic activity, achieving the highest CH₄ and CO₂ conversion rates, attributed to its enhanced metal-support interactions and improved reducibility. In contrast, the Au-promoted catalyst demonstrated the least effectiveness, highlighting the importance of promoter selection in optimizing catalyst performance for DRM. The findings underscore the necessity of tailoring promoter-support interactions to achieve efficient and durable catalytic systems for syngas production.