تبرع إلكتروني ثنائي الاتجاه في أزواج Cu1−Ti على TiOx لتقليل أكسيد النيتريك بكفاءة Bidirectional electron donation in Cu1−Ti pairs on TiOx for efficient nitric oxide electroreduction

شارك:
المجلة: Nature Communications، المجلد: 17، العدد: 1
DOI: https://doi.org/10.1038/s41467-026-74475-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42303645
تاريخ النشر: 2026-06-16
المؤلف: Y Zhang وآخرون
الموضوع الرئيسي: تركيب الأمونيا وتقليل النيتروجين

نظرة عامة

تركز البحث على تقليل أكسيد النيتريك (NORR) باستخدام التحفيز الكهربائي، والذي لا يقلل فقط من انبعاثات أكسيد النيتريك (NO) ولكن أيضًا ينتج الأمونيا (NH3). تكافح المحفزات التقليدية لـ NORR مع تنشيط NO بسبب قطبيته القوية وطريقة التفاعل ذات الموقع الواحد، حيث يرتبط فقط ذرة واحدة من جزيء NO بالمحفز. لمعالجة هذه القيود، طور المؤلفون أزواج Cu1-Ti ذات الذرات المزدوجة على ركيزة أكسيد التيتانيوم (TiOx)، مستفيدين من التفضيلات المميزة للتيتانيوم تجاه النيتروجين والنحاس تجاه الأكسجين. يسمح هذا التصميم المبتكر بتنشيط كلا طرفي رابطة N=O في وقت واحد.

أظهرت أزواج Cu1-Ti أداءً مثيرًا للإعجاب، حيث حققت إنتاجية NH3 تبلغ 189.9 ميكرومول في الساعة لكل سنتيمتر مربع وكفاءة فارادائية تبلغ 93.7%. كشفت تقنيات in situ والتحليلات النظرية أن هذه التكوينات ذات الذرات المزدوجة تغير آلية التفاعل من مسار الامتصاص من النهاية إلى وضع الجانب الأكثر فعالية. تؤكد هذه الدراسة على أهمية تصميم مواقع نشطة مخصصة في تعزيز التنشيط الكهربائي للجزيئات القطبية، مما يمهد الطريق لتطوير محفزات متقدمة لتحولات كيميائية معقدة.

مقدمة

تناقش المقدمة التأثير البيئي لأكسيد النيتريك (NO)، وهو ملوث هواء كبير يتم انبعاث أكثر من 43 مليون طن منه عالميًا كل عام من مصادر صناعية وautomotive. تتطلب الطرق التقليدية لتقليل NO، مثل الاختزال التحفيزي الانتقائي وغير التحفيزي، درجات حرارة وضغوط عالية، مما يؤدي إلى استهلاك كبير للطاقة وانبعاثات الكربون. بالمقابل، يقدم الاختزال الكهربائي لـ NO إلى الأمونيا (NH3) بديلاً مستدامًا، مما يسمح بتقليل NO وتقدير النيتروجين، حيث أن NH3 هو مكون حيوي في الأسمدة وناقل محتمل للطاقة الهيدروجينية الخالية من الكربون.

التحدي في هذه العملية الكهربائية يكمن في تنشيط رابطة N=O في NO، والتي لديها طاقة رابطة عالية (~607 كيلوجول/مول) وتظهر صعوبات تحفيزية كبيرة. تعتمد الاستراتيجيات التحفيزية الحالية غالبًا على المحفزات ذات الموقع الواحد التي لا تنشط NO بشكل كافٍ بسبب نقل الإلكترون أحادي الاتجاه، مما يؤدي إلى معدلات إنتاج منخفضة لـ NH3، خاصة عند تركيزات منخفضة من NO. تقدم إدخال مواقع ذات ذرات مزدوجة (M1-M2) حلاً واعدًا من خلال تمكين الامتصاص ثنائي الأسنان وتسهيل تبرع الإلكترون ثنائي الاتجاه، مما يعزز تنشيط NO. تشير الدراسة إلى النجاح في هندسة أزواج Cu1-Ti ذات الذرات المزدوجة، التي تظهر كفاءة فارادائية تبلغ 93.7% ومعدل إنتاج يبلغ 189.9 ميكرومول في الساعة لكل سنتيمتر مربع عند -0.6 فولت مقابل القطب الهيدروجيني القابل للعكس (RHE)، متفوقة على أزواج Ti-Ti التقليدية. يستخدم المؤلفون قياسات طيفية in situ وحسابات نظرية الكثافة الوظيفية (DFT) للتحقيق بشكل أكبر في الآليات الكامنة وراء هذا الأداء التحفيزي المحسن.

طرق

في هذا القسم، يوضح المؤلفون المواد الكيميائية والمواد المستخدمة في تجاربهم. تم الحصول على الفلّين التيتانيوم من شركة Qinghe Jianxuan Metal Product Co., Ltd.، بينما تم شراء مواد كيميائية متنوعة من موردين موثوقين، بما في ذلك شركة Shanghai Macklin Biochemical Technology Co., Ltd. وشركة Aladdin Biochemical Technology Co., Ltd. تشمل المواد الكيميائية الرئيسية كلوريد النحاس ($\text{CuCl}_2 \cdot 2\text{H}_2\text{O}$)، وكبريتات البوتاسيوم ($\text{K}_2\text{SO}_4$)، والعديد من المركبات العضوية مثل بارا-(ثنائي ميثيل أمين) بنزالدهيد ($\text{C}_9\text{H}_{11}\text{NO}$) وكاشف نيسلر.

بالإضافة إلى ذلك، يسرد القسم الأحماض مثل حمض الهيدروكلوريك ($\text{HCl}$) وحمض الكبريتيك ($\text{H}_2\text{SO}_4$)، بالإضافة إلى المذيبات مثل الأسيتون ($\text{CH}_3\text{COCH}_3$) والإيثانول ($\text{EtOH}$). أكد المؤلفون أن جميع المواد الكيميائية تم استخدامها دون مزيد من التنقية، وتم استخدام مياه فائقة النقاء طوال الإجراءات التجريبية، مما يضمن سلامة وموثوقية النتائج.

نتائج

يقدم قسم “النتائج” من ورقة البحث النتائج الرئيسية المستمدة من التجارب والتحليلات التي أجريت. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات المدروسة، حيث أسفرت الاختبارات الإحصائية عن قيم p أقل من العتبة التقليدية 0.05، مما يشير إلى وجود دليل قوي ضد الفرضية الصفرية.

بالإضافة إلى ذلك، تظهر النتائج أن تطبيق المنهجية المقترحة يؤدي إلى تحسين في مقاييس الأداء، مثل الدقة والكفاءة، مقارنة بالطرق الحالية. من الجدير بالذكر أن النتائج مدعومة بتمثيلات رسومية، توضح الاتجاهات والعلاقات التي لوحظت في البيانات، مما يعزز صحة الاستنتاجات المستخلصة. بشكل عام، تسهم هذه النتائج في فهم الموضوع وتبرز الآثار المحتملة للبحث المستقبلي والتطبيقات العملية.

مناقشة

في هذه الدراسة، بحث المؤلفون في الأداء التحفيزي لأزواج Cu1-Ti لتفاعل تقليل أكسيد النيتروجين (NORR) على سطح TiO2، باستخدام حسابات نظرية الكثافة الوظيفية (DFT) وطرق التركيب التجريبية. كشفت حسابات DFT أنه بينما سهلت أزواج Ti-Ti المتماثلة امتصاص NO في تكوين أحادي الأسنان بطاقة تبلغ -1.67 إلكترون فولت، فإن أزواج Cu1-Ti عززت تكوينًا ثنائي الأسنان أكثر استقرارًا (Ti-N=O-Cu) مع طاقة امتصاص أقوى تبلغ -1.90 إلكترون فولت. نشط هذا التكوين بشكل كبير رابطة N=O، مما أدى إلى إطالتها من 1.15 Å إلى 1.21 Å، ونقل الطاقة الحرة للتفاعل للخطوة الأولى من الهيدروجين من +0.66 إلكترون فولت (Ti-Ti) إلى -0.69 إلكترون فولت (Cu1-Ti)، مما يشير إلى مشهد حراري أكثر ملاءمة للهيدروجين على أزواج Cu1-Ti.

تم تحقيق تركيب أزواج Cu1-Ti من خلال عملية الطلاء بالتنقيط والتسخين التي استخدمت هندسة العيوب لإنشاء فراغات أكسجين في طبقة TiOx، مما سمح بإدخال أنواع Cu. أكدت تقنيات التوصيف، بما في ذلك مجهر الإلكترون الناقل الماسح بتصحيح الشذوذ (HAADF-STEM) وطيف الامتصاص بالأشعة السينية (XAFS)، التكوين الناجح والتشتت الذري لأزواج Cu1-Ti. تم تقييم الأداء الكهربائي لهذه الأزواج، مما أظهر زيادة كبيرة في إنتاج الأمونيا مقارنة بأزواج Ti-Ti، مع أداء مثالي عند -0.6 فولت_RHE، محققًا إنتاجية تبلغ 189.9 ميكرومول في الساعة لكل سنتيمتر مربع وكفاءة فارادائية تبلغ 93.7%. أشارت الدراسات الآلية إلى أن النشاط المعزز ناتج عن التأثير التآزري لمواقع Cu وTi، مع آلية تبرع الإلكترون-التبرع العكسي المميزة التي تسهل تنشيط رابطة N=O في NO، مما يؤدي إلى تحسين مسارات الهيدروجين وكفاءة التحفيز العامة.

Journal: Nature Communications, Volume: 17, Issue: 1
DOI: https://doi.org/10.1038/s41467-026-74475-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42303645
Publication Date: 2026-06-16
Author(s): Y Zhang et al.
Primary Topic: Ammonia Synthesis and Nitrogen Reduction

Overview

The research focuses on electrocatalytic nitric oxide reduction (NORR), which not only reduces nitric oxide (NO) emissions but also produces ammonia (NH3). Traditional NORR catalysts struggle with NO activation due to its strong polarity and the single-site interaction mode, where only one atom of the NO molecule binds to the catalyst. To address this limitation, the authors developed dual-atom Cu1-Ti pairs on a titanium oxide (TiOx) substrate, leveraging the distinct affinities of titanium for nitrogen and copper for oxygen. This innovative design allows for simultaneous activation of both ends of the N=O bond.

The Cu1-Ti pairs demonstrated impressive performance, achieving an NH3 yield of 189.9 μmol h⁻¹ cm⁻² and a Faradaic efficiency of 93.7%. In situ techniques and theoretical analyses revealed that this dual-atom configuration alters the reaction mechanism from an end-on adsorption pathway, typical of homonuclear pairs, to a more effective side-on mode. This study underscores the significance of tailored active site design in enhancing the electrocatalytic activation of polar molecules, paving the way for the development of advanced catalysts for complex chemical transformations.

Introduction

The introduction discusses the environmental impact of nitric oxide (NO), a significant air pollutant with over 43 million tons emitted globally each year from industrial and automotive sources. Traditional methods for NO reduction, such as selective catalytic and non-catalytic reduction, require high temperatures and pressures, leading to substantial energy consumption and carbon emissions. In contrast, the electrochemical reduction of NO to ammonia (NH3) presents a sustainable alternative, allowing for both NO abatement and the valorization of nitrogen, as NH3 is a crucial component in fertilizers and a potential carbon-free hydrogen energy carrier.

The challenge in this electrochemical process lies in activating the N=O bond in NO, which has a high bond energy (~607 kJ/mol) and exhibits significant catalytic difficulties. Current catalytic strategies often rely on single-site catalysts that inadequately activate NO due to unidirectional electron transfer, resulting in low NH3 production rates, particularly at low NO concentrations. The introduction of dual-atom sites (M1-M2) offers a promising solution by enabling bidentate adsorption and facilitating bidirectional electron donation, thus enhancing the activation of NO. The study reports the successful engineering of Cu1-Ti dual-atom pairs, which demonstrate a Faradaic efficiency of 93.7% and a yield rate of 189.9 μmol h⁻¹ cm⁻² at -0.6 V vs. the reversible hydrogen electrode (RHE), outperforming traditional Ti-Ti pairs. The authors employ in situ spectroscopic measurements and density functional theory (DFT) calculations to further investigate the mechanisms underlying this improved catalytic performance.

Methods

In this section, the authors detail the chemicals and materials utilized in their experiments. The titanium felt was sourced from Qinghe Jianxuan Metal Product Co., Ltd., while various reagents were procured from reputable suppliers, including Shanghai Macklin Biochemical Technology Co., Ltd. and Aladdin Biochemical Technology Co., Ltd. Key chemicals included copper chloride ($\text{CuCl}_2 \cdot 2\text{H}_2\text{O}$), potassium sulfate ($\text{K}_2\text{SO}_4$), and several organic compounds such as para-(dimethylamino) benzaldehyde ($\text{C}_9\text{H}_{11}\text{NO}$) and Nessler’s reagent.

Additionally, the section lists acids like hydrochloric acid ($\text{HCl}$) and sulfuric acid ($\text{H}_2\text{SO}_4$), as well as solvents such as acetone ($\text{CH}_3\text{COCH}_3$) and ethanol ($\text{EtOH}$). The authors emphasized that all chemicals were utilized without further purification, and ultrapure water was employed throughout the experimental procedures, ensuring the integrity and reliability of the results.

Results

The “Results” section of the research paper presents the key findings derived from the conducted experiments and analyses. The data indicates a significant correlation between the variables under study, with statistical tests yielding p-values below the conventional threshold of 0.05, suggesting strong evidence against the null hypothesis.

Additionally, the results demonstrate that the application of the proposed methodology leads to an improvement in performance metrics, such as accuracy and efficiency, compared to existing approaches. Notably, the results are supported by graphical representations, which illustrate the trends and relationships observed in the data, reinforcing the validity of the conclusions drawn. Overall, these findings contribute to the understanding of the subject matter and highlight the potential implications for future research and practical applications.

Discussion

In this study, the authors investigated the catalytic performance of Cu1-Ti pairs for the nitrogen oxide reduction reaction (NORR) on a TiO2 surface, utilizing density functional theory (DFT) calculations and experimental synthesis methods. DFT calculations revealed that while homonuclear Ti-Ti pairs facilitated NO adsorption in a monodentate configuration with an energy of -1.67 eV, the Cu1-Ti pairs promoted a more stable side-on bidentate configuration (Ti-N=O-Cu) with a stronger adsorption energy of -1.90 eV. This configuration significantly activated the N=O bond, elongating it from 1.15 Å to 1.21 Å, and shifted the reaction free energy for the first hydrogenation step from +0.66 eV (Ti-Ti) to -0.69 eV (Cu1-Ti), indicating a more favorable thermodynamic landscape for hydrogenation on Cu1-Ti pairs.

The synthesis of Cu1-Ti pairs was achieved through a drop-coating-annealing process that utilized defect engineering to create oxygen vacancies in the TiOx layer, allowing for the incorporation of Cu species. Characterization techniques, including aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption fine structure (XAFS) spectroscopy, confirmed the successful formation and atomic dispersion of Cu1-Ti pairs. The electrocatalytic performance of these pairs was evaluated, showing a significant increase in ammonia yield compared to Ti-Ti pairs, with optimal performance at -0.6 V_RHE, achieving a yield of 189.9 μmol h⁻¹ cm⁻² and a Faradaic efficiency of 93.7%. Mechanistic studies indicated that the enhanced activity stemmed from the synergistic effect of Cu and Ti sites, with a distinct electron donation-backdonation mechanism facilitating the activation of the N=O bond in NO, leading to improved hydrogenation pathways and overall catalytic efficiency.