تجارب التذبذب في مفاعل VENUS-F صفر الطاقة السريعة: قياس عينة مرجعية من B 4 C Oscillation Experiments at the VENUS-F Zero Power Fast Reactor: Measurement of a B 4 C Reference Sample

شارك:
المجلة: IEEE Transactions on Nuclear Science، المجلد: 73، العدد: 6
DOI: https://doi.org/10.1109/tns.2026.3670518
تاريخ النشر: 2026-03-04
المؤلف: Federico Di Croce وآخرون
الموضوع الرئيسي: فيزياء وهندسة المفاعلات النووية

نظرة عامة

لقد نفذت منشأة VENUS-F في SCK CEN، بلجيكا، تجارب تذبذب بنجاح لقياس قيم إعادة النشاط الصغيرة باستخدام عينة مرجعية من B$_4$C في طيف النيوترونات السريعة. أظهرت التجارب جدوى هذه التقنية، حيث حققت قيمة إعادة نشاط تبلغ حوالي 6 pcm مع عدم يقين أقل من 1%. تم تأكيد استقرار قياسات إعادة النشاط عبر دورات تذبذب متعددة، مما يدل على موثوقية كل من إعداد التجربة وطرق المعالجة المستخدمة، والتي شملت متوسط إعادة النشاط المعاد بنقطة عكسية ومعالجة تحويل فورييه (FT).

كشفت التحليلات عن عدم يقين منهجي كبير، يتعلق بشكل خاص بالمعلمات الحركية وثوابت الوقت الميت، والتي يمكن أن تؤثر على قيمة إعادة النشاط بنسبة تصل إلى 12%. على الرغم من هذه التحديات، أظهرت النتائج توافقًا متسقًا عبر أجهزة الكشف المختلفة وأنظمة التذبذب، مما يعزز قوة تقنية القياس. تم التخطيط لتحسينات مستقبلية، بما في ذلك إعادة قياس ثوابت الوقت الميت ودمج نظام اكتساب بوضع التيار لتعزيز دقة القياس. ستستكشف الحملات التجريبية القادمة في VENUS-F المزيد من المواد الانشطارية، بناءً على الرؤى المستخلصة من الدراسات الحالية.

مقدمة

تناقش مقدمة ورقة البحث أهمية التجارب التكاملية التي أجريت في المفاعلات ذات الطاقة الصفرية، مع التركيز بشكل خاص على مفاعل VENUS-F في SCK CEN. تعتبر هذه التجارب حاسمة لتلبية متطلبات البيانات النووية في نطاقات الطاقة السريعة والحرارية، والتي تعتبر ضرورية لتطوير المفاعلات المبردة بالمعادن الثقيلة. تؤكد الورقة على أهمية تجارب قيمة إعادة النشاط للعينة، والتي يمكن أن تعزز وتحقق البيانات النووية للمواد ذات الصلة بهذه الأنظمة. تشير حساسية استجابة المفاعل لخصائص العينة إلى الحاجة إلى بيانات نووية دقيقة ونماذج نيوترونية موصوفة بشكل جيد.

تتمثل إحدى الطرق الرئيسية المميزة في تذبذب الكومة، الذي يقلل من عدم اليقين التجريبي في قياسات قيمة إعادة النشاط، خاصةً للعينات الصغيرة. تتضمن هذه التقنية الإدخال والاستخراج الدوري للعينات وقد تم تنفيذها في تكوينات مغلقة ومفتوحة عبر مفاعلات مختلفة، بما في ذلك MINERVE وCROCUS. تقدم الورقة نتائج الحملة الأولى للتذبذب في VENUS-F، حيث تم تذبذب عينة اختبار من كربيد البورون (B₄C). توضح الدراسة إعداد التجربة، وطرق معالجة البيانات، وتحليل تغييرات إعادة النشاط، مما يظهر التناسق عبر أجهزة الكشف المختلفة ودورات التذبذب. تهدف النتائج إلى تحقيق عملية تجريبية وتقييم موثوقية القياس، مما يساهم في الثقة في النتائج التي تم الحصول عليها.

طرق

في هذا القسم، يصف المؤلفون الطرق المستخدمة لمعالجة البيانات التجريبية التي تم الحصول عليها من معدلات عد أجهزة الكشف، والتي تعكس الاضطرابات الناتجة عن إدخال العينة في سياق مفاعل نووي. يعتمد التحليل على فرضية أن جميع أجهزة الكشف تتبع الحركيات النقطية، مما يعني أنها تواجه تغيرات موحدة في تدفق النيوترونات من حيث السعة، بينما تكون الاضطرابات المكانية والطاقة غير ملحوظة. هذه الفرضية صحيحة للاضطرابات الصغيرة (حوالي 6 pcm) وعندما تكون أجهزة الكشف بعيدة بما فيه الكفاية عن مصدر الاضطراب. يشير المؤلفون إلى أنهم يستكشفون تضمين أجهزة الكشف الأقرب إلى قناة التذبذب لالتقاط التأثيرات المحلية، مما سيتطلب تقنيات معالجة معدلة.

تستند إعادة بناء إعادة نشاط النظام على إشارات الخرج من أجهزة الكشف، حيث يتم تعريف قيمة إعادة نشاط العينة على أنها الفرق في إعادة النشاط في القلب عندما تكون العينة موضوعة في الداخل مقابل الخارج. يتم إجراء معالجة البيانات في كل من مجال الزمن، باستخدام محلل الحركيات النقطية العكسية، وفي مجال التردد، باستخدام تعبير دالة نقل الطاقة الصفرية (ZPTF). يشير المؤلفون إلى تفاصيل إضافية تتعلق بالاشتقاق والتحقق والمقارنة لهذه الطرق المعالجة مع بيانات اصطناعية في أعمال سابقة.

نتائج

في هذا القسم، تتم مقارنة النتائج من معالجة تحويل فورييه السريع (FT) مع تلك التي تم الحصول عليها باستخدام طريقة الحركيات النقطية العكسية (IPK). يتم استخدام دالة نقل الطاقة الصفرية (ZPTF) لإعادة بناء سعة إعادة النشاط عند التردد الأساسي، والتي يتم تحويلها بعد ذلك إلى التغيير في إعادة النشاط ($\Delta \rho$) من خلال نهجين تصحيحيين: أحدهما يعتمد على شكل موضع العينة والآخر على شكل إعادة النشاط الملساء. يقتصر التحليل على أجهزة الكشف من 1 إلى 7، حيث أن أجهزة الكشف المتبقية غير مناسبة لمعالجة FT. تشير النتائج إلى وجود فرق يبلغ حوالي 1.4% بين طريقتي التصحيح، مع تقليل انحراف $\Delta \rho$ من IPK من 2.3% إلى أقل من 1% عند استخدام الشكل الفعلي لإعادة النشاط.

على الرغم من الترابط بين التقديرات عند استخدام تصحيحات الشكل المستمدة من IPK، فإن اتساق النتائج يشير إلى الفعالية المحتملة لطريقة معالجة FT. ومع ذلك، فإن التصحيح القائم على IPK يقلل من مزايا معالجة FT، حيث يتطلب تحليلًا شاملاً في مجال الزمن. ومع ذلك، تظل هذه الطريقة قابلة للتطبيق لمختلف إدخالات شكل إعادة النشاط، شريطة أن تكون إعادة النشاط صغيرة بما فيه الكفاية لكي تنطبق تعبير ZPTF وأن تتذبذب حول الحرجية. ستؤكد القياسات المستقبلية باستخدام محرك أسرع الافتراضات المتعلقة بالتذبذبات الزائفة.

مناقشة

في قسم المناقشة من ورقة البحث، يقيم المؤلفون تكرارية القياسات التي أجريت خلال تجارب التذبذب في مفاعل VENUS-F. تتضمن هذه التقييمات تكرار التجارب باستخدام نفس العينة تحت أنظمة تذبذب مختلفة لتحديد التباينات بين أجهزة الكشف والتحقق من موثوقية النتائج. يهدف التحليل إلى تعزيز الثقة في القيم المتوسطة وعدم اليقين المرتبط بها المستمدة من التجارب.

يتميز مفاعل VENUS-F بأنه مفاعل بحثي ذو طيف سريع وطاقة صفرية، مع تكوين نواة مصمم لحملات تجريبية محددة. يستخدم نظام الكشف غرف انشطار 235U لمراقبة سعة تدفق النيوترونات، مع إيلاء اهتمام خاص لوضع أجهزة الكشف لتحسين معدلات العد وتقليل الوقت الميت. تستخدم التجارب عينة من B4C، تم اختيارها لخصائصها الموصوفة بشكل جيد وقيمة إعادة النشاط المناسبة، مما يسمح بتقنيات تذبذب فعالة. تشمل منهجية معالجة البيانات تطبيق تقنيات الحركيات النقطية العكسية (IPK) وتحويل فورييه (FT) لإعادة بناء قيم إعادة النشاط، مع التركيز على قياس عدم اليقين والانحيازات المتأصلة في القياسات. تظهر النتائج نهجًا منهجيًا لتحليل تجارب التذبذب، مما يوفر رؤى حول موثوقية ودقة قياسات إعادة النشاط التي تم الحصول عليها.

Journal: IEEE Transactions on Nuclear Science, Volume: 73, Issue: 6
DOI: https://doi.org/10.1109/tns.2026.3670518
Publication Date: 2026-03-04
Author(s): Federico Di Croce et al.
Primary Topic: Nuclear reactor physics and engineering

Overview

The VENUS-F facility at SCK CEN, Belgium, has successfully implemented oscillation experiments to measure small reactivity worths using a B$_4$C reference sample in a fast neutron spectrum. The experiments demonstrated the feasibility of this technique, achieving a reactivity worth of approximately 6 pcm with an uncertainty below 1%. The stability of the reactivity measurements was confirmed across multiple oscillation cycles, indicating the reliability of both the experimental setup and the processing methods employed, which included averaging the inverse point kinetics reconstructed reactivity and Fourier transform (FT) processing.

The analysis revealed significant systematic uncertainties, particularly related to kinetic parameters and dead time constants, which could affect the reactivity worth by up to 12%. Despite these challenges, the results showed consistent agreement across different detectors and oscillation schemes, reinforcing the robustness of the measurement technique. Future improvements are planned, including re-measurement of dead time constants and the integration of a current-mode acquisition system to enhance measurement accuracy. Upcoming experimental campaigns at VENUS-F will further explore fissile materials, building on the insights gained from the current studies.

Introduction

The introduction of the research paper discusses the significance of integral experiments conducted in zero-power reactors, particularly focusing on the VENUS-F reactor at SCK CEN. These experiments are crucial for addressing nuclear data requirements in the fast and epithermal energy ranges, which are essential for the development of heavy-metal-cooled reactors. The paper emphasizes the importance of sample reactivity worth experiments, which can enhance and validate nuclear data for materials pertinent to these systems. The sensitivity of the reactor’s response to sample properties underscores the need for accurate nuclear data and well-characterized neutronic models.

A key method highlighted is pile-oscillation, which reduces experimental uncertainty in reactivity worth measurements, especially for small samples. This technique involves the periodic insertion and extraction of samples and has been implemented in both closed and open-loop configurations across various reactors, including MINERVE and CROCUS. The paper presents the results from the first oscillation campaign at VENUS-F, where a boron carbide (B₄C) test sample was oscillated. The study details the experimental setup, data processing methodologies, and the analysis of reactivity changes, demonstrating consistency across different detectors and oscillation cycles. The findings aim to validate the experimental process and assess measurement reliability, contributing to the confidence in the results obtained.

Methods

In this section, the authors describe the methods used for processing experimental data obtained from detector count rates, which reflect the perturbations caused by sample insertion in a nuclear reactor context. The analysis is predicated on the assumption that all detectors adhere to point kinetics, meaning they experience uniform neutron flux variations in amplitude, while spatial and energy perturbations are negligible. This assumption is valid for small perturbations (approximately 6 pcm) and when detectors are sufficiently distanced from the perturbation source. The authors note that they are exploring the inclusion of detectors closer to the oscillation channel to capture local effects, which will necessitate revised processing techniques.

The reconstruction of system reactivity is based on the output signals from the detectors, with the sample reactivity worth defined as the difference in core reactivity when the sample is positioned IN versus OUT. Data processing is conducted in both the time domain, utilizing an inverse point kinetics solver, and the frequency domain, employing the zero power transfer function (ZPTF) expression. The authors reference additional details regarding the derivation, verification, and comparison of these processing methods with synthetic data in previous works.

Results

In this section, the results from Fast Fourier Transform (FT) processing are compared with those obtained using the Inverse Point Kinetics (IPK) method. The Zero Power Transfer Function (ZPTF) is utilized to reconstruct the reactivity amplitude at the fundamental frequency, which is subsequently converted into the change in reactivity ($\Delta \rho$) through two correction approaches: one based on the sample position shape and another on the smoothed reactivity shape. The analysis is limited to detectors 1 to 7, as the remaining detectors are unsuitable for FT processing. The findings indicate a difference of approximately 1.4% between the two correction methods, with the deviation of $\Delta \rho$ from IPK reducing from 2.3% to less than 1% when the actual reactivity shape is employed.

Despite the correlation between estimates when using IPK-derived shape corrections, the consistency of the results suggests the potential efficacy of the FT processing method. However, the IPK-based correction diminishes the advantages of FT processing, as it necessitates a comprehensive time-domain analysis. Nonetheless, this method remains applicable for various reactivity shape insertions, provided the reactivity is sufficiently small for the ZPTF expression to hold and oscillates around criticality. Future measurements with a faster motor will further validate the assumption of pseudosquare oscillations.

Discussion

In the discussion section of the research paper, the authors evaluate the repeatability of measurements conducted during oscillation experiments at the VENUS-F reactor. This assessment involves repeating experiments with the same sample under various oscillation schemes to identify discrepancies among detectors and to validate the reliability of the results. The analysis aims to enhance confidence in the mean values and associated uncertainties derived from the experiments.

The VENUS-F reactor is characterized as a zero-power fast spectrum research reactor, with a core configuration designed for specific experimental campaigns. The detection system employs 235U fission chambers to monitor neutron flux amplitude, with careful consideration given to detector placement to optimize count rates and minimize dead time. The experiments utilize a B4C sample, selected for its well-characterized properties and suitable reactivity worth, allowing for effective oscillation techniques. The methodology for data processing includes the application of inverse point kinetics (IPK) and Fourier Transform (FT) techniques to reconstruct reactivity values, with a focus on quantifying uncertainties and biases inherent in the measurements. The results demonstrate a systematic approach to analyzing oscillation experiments, providing insights into the reliability and accuracy of the reactivity measurements obtained.