تحسين بروتوكول استر ميثيل الأحماض الدهنية لت quantification الأحماض الدهنية ذات السلاسل الفردية والزوجية في الخميرة Optimization of a fatty acid methyl ester protocol for quantification of odd- and even-chain fatty acids in yeast

شارك:
المجلة: AMB Express، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1186/s13568-026-02022-8
PMID: https://pubmed.ncbi.nlm.nih.gov/41661423
تاريخ النشر: 2026-02-09
المؤلف: Veronica Bonzanini وآخرون
الموضوع الرئيسي: أيض الدهون وتخليقها الحيوي

نظرة عامة

في هذه الدراسة، قمنا بتطوير بروتوكول محسن لتحديد كميات استرات الميثيل للأحماض الدهنية (FAME) في الخمائر الزيتية، مع التركيز بشكل خاص على الأحماض الدهنية ذات السلاسل الزوجية (ECFAs) والأحماض الدهنية ذات السلاسل الفردية (OCFAs). شملت التعديلات الرئيسية على البروتوكول الأصلي اختيار معيار داخلي مناسب (IS) وتعديلات على عملية التطبيع. كما تم إجراء تحسينات كبيرة على إجراء الاستخراج ودقة الكروماتوغرافيا الغازية (GC). تشير نتائجنا إلى أن بروتوكولات FAME يمكن أن تعطي نتائج غير متسقة عبر أنواع الخمائر المختلفة، مما يستلزم طرق استخراج مصممة خصيصًا تأخذ في الاعتبار التباينات في تركيب جدار الخلية ومحتوى الدهون داخل الخلايا.

علاوة على ذلك، بينما يعتبر التطبيع باستخدام ISs أمرًا حاسمًا للتحديد الدقيق، يمكن أن تؤدي الفروق في سلوك IS مقارنة بالتحليلات أثناء الاستخراج أو التحويل إلى عدم اليقين. قدم استخدام معيار داخلي غير ميثيل ومؤشر بالكامل (حمض الميرستيك-d₂₇) تحديات تحت الظروف المختبرة، مما يبرز الحاجة إلى التكيف الدقيق لبروتوكولات FAME عند استخدام المعايير المؤشرة. ومع ذلك، من خلال استخدام معيار داخلي مؤشر مسبقًا لتخفيف مشكلات التطبيع، أظهرنا أن بروتوكولنا المدعوم بالخرز في الميكروويف يعزز بشكل كبير من عوائد FAME وقابلية التكرار عبر سلالات الخميرة المختلفة.

مقدمة

تسلط مقدمة ورقة البحث الضوء على الاهتمام المتزايد في الإنتاج الميكروبي للزيوت المتجددة، وخاصة من الخمائر الزيتية التي يمكن أن تتراكم محتوى دهني كبير. بينما ركزت معظم الدراسات على الأحماض الدهنية ذات السلاسل الزوجية (ECFAs)، فإن الأحماض الدهنية ذات السلاسل الفردية (OCFAs) مثل حمض البنتاديكانويك (C15:0) وحمض الهيبتاديكانويك (C17:0) تكتسب اعترافًا لفوائدها الصحية، بما في ذلك الأدوار المحتملة في تقليل مخاطر السمنة وأمراض القلب والأوعية الدموية. تؤكد الورقة على الحاجة إلى بروتوكولات محسنة لتحليل الأحماض الدهنية، وخاصة طريقة استرات الميثيل للأحماض الدهنية (FAME)، التي تتضمن عدة خطوات حاسمة: زراعة وحصاد الخميرة، إضافة المعايير الداخلية، استخراج الدهون، التحويل، والتحليل النهائي عبر الكروماتوغرافيا الغازية-مطياف الكتلة (GC-MS).

يشير المؤلفون إلى أن اختيار المعايير الداخلية أمر حاسم للتحديد الدقيق، خاصة عند تحليل OCFAs، حيث تُفضل المعايير الداخلية المؤشرة (dIS). تهدف الدراسة إلى تقييم وتحسين الخطوات الرئيسية في بروتوكول FAME، بما في ذلك طرق استخراج الدهون والتحويل، مع مقارنة نوعين متميزين من الخمائر الزيتية: Yarrowia lipolytica، المعروفة بتراكم الدهون العالي، وBlastobotrys adeninivorans، التي تنتج كميات أقل من الدهون. تهدف هذه التحليل المقارن إلى تعزيز الفهم لكيفية تأثير أنواع الخمائر المختلفة على نتائج تحليل الأحماض الدهنية وتحديد كميتها.

الطرق

يستعرض قسم “المواد والطرق” تصميم التجربة والإجراءات المستخدمة في الدراسة. يوضح المواد المحددة المستخدمة، بما في ذلك أي مواد كيميائية، معدات، وعينات بيولوجية، مما يضمن تكرار التجارب. تشمل المنهجية البروتوكولات لجمع البيانات، بما في ذلك أي تحليلات إحصائية تم إجراؤها لتفسير النتائج.

بالإضافة إلى ذلك، قد يصف القسم الظروف التجريبية، مثل درجة الحرارة، المدة، وأي ضوابط تم تنفيذها للتحقق من النتائج. بشكل عام، يخدم هذا القسم لتوفير إطار شامل لفهم كيفية إجراء البحث، مما يسمح بالتقييم النقدي وإمكانية التكرار من قبل باحثين آخرين في هذا المجال.

النتائج

يقدم قسم “النتائج” في ورقة البحث النتائج الرئيسية المستمدة من التجارب أو التحليلات التي تم إجراؤها. يوضح نتائج الاختبارات المختلفة، مع تسليط الضوء على الارتباطات الإحصائية الهامة والظواهر الملحوظة. غالبًا ما يتم توضيح البيانات من خلال الرسوم البيانية والجداول، التي توفر تمثيلًا بصريًا للنتائج، مما يسهل تفسير الاتجاهات والأنماط.

قد يناقش القسم أيضًا تداعيات النتائج فيما يتعلق بالفرضيات المطروحة في الدراسة. من الضروري ملاحظة أي نتائج غير متوقعة أو شذوذ ظهرت أثناء البحث، حيث يمكن أن تقدم رؤى حول الآليات الأساسية أو تقترح مجالات لمزيد من التحقيق. بشكل عام، تسهم النتائج في الفهم الأوسع للموضوع وقد توجه اتجاهات البحث المستقبلية.

المناقشة

في هذه الدراسة، قام المؤلفون بتحسين بروتوكول استرات الميثيل للأحماض الدهنية (FAME) لتحليل كل من الأحماض الدهنية الأساسية وغير الأساسية من سلالات الخميرة Yarrowia lipolytica وBlastobotrys adeninivorans. سلط البحث الضوء على الفروق الكبيرة في كفاءة استخراج ثلاثي الجليسريد (TAG) وعائد FAME بين السلالتين، والتي تعزى إلى التباينات في تركيب جدار الخلية ومحتوى TAG. أظهر البروتوكول المعتمد على الميكروويف أداءً متفوقًا مقارنة بالطريقة المعتمدة على الاهتزاز، خاصة في استعادة معيار داخلي مؤشر بالكامل (dIS)، والذي كان حاسمًا للتطبيع الدقيق وتحديد كميات الأحماض الدهنية.

أدى إدخال خطوة ما قبل الاستخراج المدعومة بالخرز إلى تحسين كبير في استعادة الدهون، حيث حقق زيادة متوسطة بنسبة 70% لـ Y. lipolytica و32% لـ B. adeninivorans، مع تقليل التباين في النتائج. كما أثبتت الدراسة أن كفاءة الميثلة لـ dIS تختلف مع الطريقة المستخدمة في الميكروويف، مما يؤثر على عملية التطبيع. بشكل عام، قدم البروتوكول المحسن دقة عالية وقابلية تكرار في تحليل FAME، مما يبرز أهمية الاعتبارات المنهجية في الإجراءات التحليلية لضمان نتائج موثوقة في تحليل الأحماض الدهنية.

Journal: AMB Express, Volume: 16, Issue: 1
DOI: https://doi.org/10.1186/s13568-026-02022-8
PMID: https://pubmed.ncbi.nlm.nih.gov/41661423
Publication Date: 2026-02-09
Author(s): Veronica Bonzanini et al.
Primary Topic: Lipid metabolism and biosynthesis

Overview

In this study, we developed an optimized protocol for the quantification of fatty acid methyl esters (FAME) in oleaginous yeast, specifically targeting both even-chain fatty acids (ECFAs) and odd-chain fatty acids (OCFAs). Key modifications to the original protocol included the selection of an appropriate internal standard (IS) and adjustments to the normalization process. Significant enhancements were also made to the extraction procedure and gas chromatography (GC) resolution. Our results indicate that FAME protocols can yield inconsistent results across different yeast species, necessitating tailored extraction methods that account for variations in cell wall composition and intracellular lipid content.

Furthermore, while normalization with ISs is critical for accurate quantification, discrepancies in IS behavior compared to analytes during extraction or transesterification can introduce uncertainty. The use of a fully deuterated, non-methylated IS (myristic acid-d₂₇) presented challenges under the tested conditions, emphasizing the need for careful adaptation of FAME protocols when utilizing deuterated standards. However, by employing a pre-methylated deuterated IS to mitigate normalization issues, we demonstrated that our bead-supplemented microwave protocol significantly enhances FAME yields and reproducibility across different yeast strains.

Introduction

The introduction of the research paper highlights the growing interest in microbial production of renewable oils, particularly from oleaginous yeasts that can accumulate significant lipid content. While most studies have concentrated on even-chain fatty acids (ECFAs), odd-chain fatty acids (OCFAs) such as pentadecanoic acid (C15:0) and heptadecanoic acid (C17:0) are gaining recognition for their health benefits, including potential roles in reducing risks for obesity and cardiovascular diseases. The paper emphasizes the need for optimized protocols for fatty acid analysis, particularly the Fatty Acid Methyl Ester (FAME) method, which involves several critical steps: cultivation and harvesting of yeast, addition of internal standards, lipid extraction, transesterification, and final analysis via gas chromatography-mass spectrometry (GC-MS).

The authors note that the choice of internal standards is crucial for accurate quantification, especially when analyzing OCFAs, where deuterated internal standards (dIS) are preferred. The study aims to evaluate and optimize key steps in the FAME protocol, including lipid extraction and transesterification methods, while comparing two distinct oleaginous yeast species: Yarrowia lipolytica, known for high lipid accumulation, and Blastobotrys adeninivorans, which produces lower lipid amounts. This comparative analysis is intended to enhance the understanding of how different yeast species influence the outcomes of fatty acid profiling and quantification.

Methods

The “Materials and Methods” section outlines the experimental design and procedures employed in the study. It details the specific materials used, including any reagents, equipment, and biological samples, ensuring reproducibility of the experiments. The methodology encompasses the protocols for data collection, including any statistical analyses performed to interpret the results.

Additionally, the section may describe the experimental conditions, such as temperature, duration, and any controls implemented to validate the findings. Overall, this section serves to provide a comprehensive framework for understanding how the research was conducted, allowing for critical evaluation and potential replication by other researchers in the field.

Results

The “Results” section of the research paper presents key findings derived from the conducted experiments or analyses. It details the outcomes of various tests, highlighting significant statistical correlations and observed phenomena. The data is often illustrated through graphs and tables, which provide a visual representation of the results, facilitating easier interpretation of trends and patterns.

The section may also discuss the implications of the findings in relation to the hypotheses posed in the study. It is essential to note any unexpected results or anomalies that emerged during the research, as these can offer insights into the underlying mechanisms or suggest areas for further investigation. Overall, the results contribute to the broader understanding of the topic and may inform future research directions.

Discussion

In this study, the authors optimized a fatty acid methyl ester (FAME) protocol for analyzing both essential and non-essential fatty acids from the yeast strains Yarrowia lipolytica and Blastobotrys adeninivorans. The research highlighted significant differences in triacylglycerol (TAG) extraction efficiency and FAME yield between the two strains, attributed to variations in cell wall composition and TAG content. The microwave-assisted protocol demonstrated superior performance over the shaker-assisted method, particularly in the recovery of a fully deuterated internal standard (dIS), which was crucial for accurate normalization and quantification of fatty acids.

The introduction of a bead-assisted pre-extraction step significantly improved lipid recovery, yielding an average increase of 70% for Y. lipolytica and 32% for B. adeninivorans, while also reducing variability in results. The study further established that the methylation efficiency of the dIS varied with the microwave method used, impacting the normalization process. Overall, the optimized protocol provided high precision and reproducibility in FAME analysis, emphasizing the importance of methodical considerations in analytical procedures to ensure reliable results in fatty acid profiling.