DOI: https://doi.org/10.53022/oarjst.2026.18.1.0082
تاريخ النشر: 2026-09-22
المؤلف: Innocent Mapindu وآخرون
الموضوع الرئيسي: التصنيع الإضافي وتقنيات الطباعة ثلاثية الأبعاد
نظرة عامة
تستخدم هذه الورقة البحثية طريقة تاجوشي لتحسين أربعة معلمات عملية رئيسية في النمذجة بالترسيب المنصهر (FDM): ارتفاع الطبقة، كثافة التعبئة، درجة حرارة الفوهة، وسرعة الطباعة، مع التركيز على استجابتين متنافستين – قوة الشد ووقت الطباعة. باستخدام مصفوفة تاجوشي L9(3⁴) المتعامدة، تقلل الدراسة من عدد التجارب المطلوبة من 81 إلى 9 تجارب فقط، مما ينتج عنه 27 عينة للتحليل. تكشف النتائج أن كثافة التعبئة تؤثر بشكل كبير على قوة الشد (مساهمة 68.99%)، بينما يعتبر ارتفاع الطبقة هو العامل الأكثر أهمية لوقت الطباعة (مساهمة 51.77%).
تتناقض الإعدادات المثلى لأقصى قوة شد (المتوقعة عند 49.02 ميغاباسكال) وأدنى وقت طباعة (المتوقع عند 8.69 دقيقة) عبر ثلاثة معلمات، مما يستلزم التوصل إلى حل وسط. تم تحقيق ذلك من خلال تحليل العلاقات الرمادية (GRA)، الذي حدد إعدادًا متوازنًا بارتفاع طبقة 0.30 مم، وكثافة تعبئة 75%، ودرجة حرارة فوهة 220 درجة مئوية، وسرعة طباعة 80 مم/ثانية. ومن الجدير بالذكر أن سرعة الطباعة (47.89%) ودرجة حرارة الفوهة (30.34%) كانت العوامل الأكثر تأثيرًا في تحديد درجة الحل الوسط. تستنتج الدراسة أن منهجية تاجوشي-ANOVA-GRA تقدم إطارًا إحصائيًا قويًا وفعالًا من حيث الموارد لتحسين عمليات FDM، مما يكون مفيدًا بشكل خاص لمختبرات التصنيع ذات القدرات المحدودة في الاختبار. يُوصى بإجراء تجارب تأكيدية عند الإعدادات المقترحة قبل التنفيذ في الإنتاج.
مقدمة
تستعرض المقدمة تطور التصنيع الإضافي (AM)، مع التركيز بشكل خاص على النمذجة بالترسيب المنصهر (FDM)، التي انتقلت من تقنية سريعة للنماذج الأولية إلى طريقة إنتاج قابلة للتطبيق. تُفضل FDM بسبب تكاليفها المنخفضة، وتنوع المواد، وسهولة استخدامها، كما هو محدد بواسطة ISO/ASTM 52900. تتضمن عملية التصنيع بناء الأجزاء طبقة تلو الأخرى من خلال بثق خيوط البلاستيك الحراري المنصهر، مع معلمات عملية رئيسية تشمل ارتفاع الطبقة، وكثافة التعبئة، ودرجة حرارة الفوهة، وسرعة الطباعة، واتجاه الشبكة، وأطراف القشرة. غالبًا ما تتعارض هذه المعلمات، مما يعقد تحسين جودة الأجزاء وسرعة الإنتاج.
لمعالجة هذه التحديات، تدعو الورقة إلى استخدام تصميم تجارب إحصائي (DOE)، وبشكل خاص طريقة تاجوشي، التي تسمح بتحسين العملية بشكل فعال من خلال تقليل التجارب التجريبية مع تصنيف تأثير المعلمات بشكل فعال. لقد اكتسب هذا النهج زخمًا في تحسين معلمات FDM، غالبًا بالتزامن مع تحليل التباين (ANOVA) وتحليل العلاقات الرمادية (GRA) للتوفيق بين مقاييس الأداء المتعددة. تستخدم الدراسة مصفوفة تاجوشي L9(3⁴) المشبعة لضبط أربعة معلمات FDM حاسمة – ارتفاع الطبقة، وكثافة التعبئة، ودرجة حرارة الفوهة، وسرعة الطباعة – لتقييم تأثيراتها على الاستجابات الميكانيكية (قوة الشد) والإنتاجية (وقت الطباعة).
طرق
في هذه الدراسة، تم إجراء سلسلة من اختبارات الشد على عينات مطبوعة ثلاثية الأبعاد مصنوعة من خيوط حمض البولي لاكتيك (PLA) بقطر 1.75 مم باستخدام طابعة FDM مكتبية مزودة بفوهة نحاسية بقطر 0.4 مم. كانت كل عينة تحتوي على قشرة خارجية صلبة مع محيطين وثلاث طبقات علوية/سفلية، بينما كانت الداخلية مليئة بتعبئة خطية ±45°. تم طباعة العينات في اتجاه ثابت على طول مستوى X-Y، مما يسمح بالتحقيق المنهجي في أربعة متغيرات: ارتفاع الطبقة، كثافة التعبئة، درجة حرارة الفوهة، وسرعة الطباعة، كما هو موضح في الجدول I.
استخدم تصميم التجربة مصفوفة متعامدة L9(3⁴)، مما أسفر عن تسع تركيبات معلمات متميزة، تم تكرار كل منها ثلاث مرات للحصول على إجمالي 27 عينة. تم تكييف العينات في درجة حرارة الغرفة (23 ± 2 °C)، تلاها اختبار الشد بسرعة رأس العارضة 5 مم/دقيقة، وفقًا لمعايير ASTM D638. تم تحديد أقصى قوة شد على أنها أقصى إجهاد هندسي عند الفشل. بالإضافة إلى ذلك، تم تسجيل أوقات الطباعة لكل عينة ومقارنتها مع أوقات البناء المقدرة من قبل برنامج التقطيع لضمان الدقة في تقييم عملية الطباعة. يتم تلخيص قيم المعلمات المحددة لكل تجربة في الجدول II.
نتائج
في هذا القسم، يقدم المؤلفون نتائج التجارب على مستوى التجربة، مع التركيز على نسب الإشارة إلى الضوضاء (S/N) وتحليل التباين (ANOVA) لكل متغير استجابة فردي. يوفر تحليل S/N رؤى حول قوة الاستجابات التجريبية، بينما يسهل تحليل ANOVA تحديد العوامل المهمة التي تؤثر على هذه الاستجابات. بالإضافة إلى ذلك، يتم استخدام تحليل العلاقات الرمادية لاشتقاق إعداد معلمات حل وسط، والذي يوازن بين معايير الاستجابة المختلفة بشكل فعال. يسمح هذا النهج متعدد الأبعاد بفهم شامل للنتائج التجريبية ويساعد في تحسين المعلمات لأداء أفضل.
مناقشة
في هذه الدراسة، يتناول المؤلفون تحسين معلمات عملية النمذجة بالترسيب المنصهر (FDM) – ارتفاع الطبقة، كثافة التعبئة، درجة حرارة الفوهة، وسرعة الطباعة – من خلال استخدام مصفوفة تاجوشي L9(3⁴) مع تحليل التباين (ANOVA) وتحليل العلاقات الرمادية (GRA). التحدي الرئيسي المحدد هو الطبيعة المتعارضة للمعلمات التي تؤثر على قوة الشد ووقت الطباعة، مما يستلزم اتباع نهج منهجي لتحقيق التوازن بين هذه التبادلات. تقلل المنهجية المقترحة بشكل كبير من عدد التجارب المطلوبة من 81 إلى 9 فقط، بينما لا تزال توفر تقييمًا إحصائيًا قويًا لمساهمات المعلمات في الاستجابات.
تكشف النتائج أن كثافة التعبئة هي العامل الأكثر تأثيرًا على قوة الشد، حيث تمثل 68.99% من التباين، تليها ارتفاع الطبقة بنسبة 51.77%. في المقابل، يعتبر ارتفاع الطبقة هو العامل السائد الذي يؤثر على وقت الطباعة، حيث يساهم بنسبة 51.77% في تباينه. تختلف الإعدادات المثلى لقوة الشد (ارتفاع طبقة 0.10 مم، كثافة تعبئة 75%، درجة حرارة فوهة 220 درجة مئوية، وسرعة طباعة 40 مم/ثانية) عن تلك الخاصة بوقت الطباعة (ارتفاع طبقة 0.30 مم، كثافة تعبئة 25%، درجة حرارة فوهة 220 درجة مئوية، وسرعة طباعة 80 مم/ثانية)، مع كون درجة حرارة الفوهة هي الوحيدة المتسقة عبر كلا التحسينين. ينجح نهج GRA في التوفيق بين هذه الاستجابات المتعارضة، مما يؤدي إلى إعداد حل وسط بارتفاع طبقة 0.30 مم، وكثافة تعبئة 75%، ودرجة حرارة فوهة 220 درجة مئوية، وسرعة طباعة 80 مم/ثانية. تُظهر هذه الدراسة فعالية إطار عمل تاجوشي-ANOVA-GRA كأداة عملية لتحسين عمليات FDM في بيئات ذات موارد محدودة.
DOI: https://doi.org/10.53022/oarjst.2026.18.1.0082
Publication Date: 2026-09-22
Author(s): Innocent Mapindu et al.
Primary Topic: Additive Manufacturing and 3D Printing Technologies
Overview
This research paper employs the Taguchi method to optimize four key process parameters in fused deposition modeling (FDM): layer height, infill density, nozzle temperature, and print speed, focusing on two competing responses—tensile strength and print time. Utilizing a Taguchi L9(3⁴) orthogonal array, the study reduces the number of required experiments from 81 to just 9 trials, resulting in 27 specimens for analysis. The findings reveal that infill density significantly influences tensile strength (68.99% contribution), while layer height is the most critical factor for print time (51.77% contribution).
The optimal settings for maximum tensile strength (predicted at 49.02 MPa) and minimum print time (predicted at 8.69 min) conflict across three parameters, necessitating a compromise. This was achieved through grey relational analysis (GRA), which identified a balanced setting of 0.30 mm layer height, 75% infill density, 220°C nozzle temperature, and 80 mm/s print speed. Notably, print speed (47.89%) and nozzle temperature (30.34%) were the most influential factors in determining the compromise grade. The study concludes that the Taguchi-ANOVA-GRA methodology offers a statistically robust and resource-efficient framework for optimizing FDM processes, particularly beneficial for manufacturing laboratories with limited testing capabilities. Confirmation experiments at the proposed settings are recommended before implementation in production.
Introduction
The introduction outlines the evolution of additive manufacturing (AM), particularly focusing on fused deposition modeling (FDM), which has transitioned from a niche rapid-prototyping technique to a viable production method. FDM is favored for its low costs, material versatility, and user-friendliness, as defined by ISO/ASTM 52900. The manufacturing process involves layer-by-layer construction of parts through the extrusion of melted thermoplastic filament, with key process parameters including layer height, infill density, nozzle temperature, print speed, raster orientation, and shell perimeters. These parameters often conflict, complicating the optimization of part quality and production speed.
To address these challenges, the paper advocates for the use of statistical design of experiments (DOE), specifically the Taguchi method, which allows for efficient process optimization by minimizing experimental trials while effectively ranking the influence of parameters. This approach has gained traction in FDM parameter optimization, often in conjunction with analysis of variance (ANOVA) and grey relational analysis (GRA) to reconcile multiple performance metrics. The study employs a saturated Taguchi L9(3⁴) orthogonal array to simultaneously adjust four critical FDM parameters—layer height, infill density, nozzle temperature, and print speed—to evaluate their effects on mechanical (tensile strength) and productivity (print time) responses.
Methods
In this study, a series of tensile tests were conducted on 3D printed specimens made from 1.75 mm polylactic acid (PLA) filament using a desktop Fused Deposition Modeling (FDM) printer equipped with a 0.4 mm brass nozzle. Each specimen featured a solid outer shell with two perimeters and three top/bottom layers, while the interior was filled with a ±45° rectilinear infill. The specimens were printed in a consistent orientation along the X-Y plane, allowing for the systematic investigation of four variables: layer height, infill density, nozzle temperature, and print speed, as detailed in Table I.
The experimental design employed an L9(3⁴) orthogonal array, resulting in nine distinct parameter combinations, each replicated three times to yield a total of 27 specimens. Conditioning of the specimens occurred at room temperature (23 ± 2 °C), followed by tensile testing at a crosshead speed of 5 mm/min, adhering to ASTM D638 standards. The ultimate tensile strength was determined as the maximum engineering stress at failure. Additionally, print times for each specimen were recorded and compared against the slicer’s estimated build times to ensure accuracy in the assessment of the printing process. The specific parameter values for each trial are summarized in Table II.
Results
In this section, the authors present the trial-level experimental results, focusing on the signal-to-noise (S/N) ratios and the analysis of variance (ANOVA) for each individual response variable. The S/N analysis provides insights into the robustness of the experimental responses, while the ANOVA facilitates the identification of significant factors influencing these responses. Additionally, a grey relational analysis is employed to derive a compromise parameter setting, which balances the various response criteria effectively. This multi-faceted approach allows for a comprehensive understanding of the experimental outcomes and aids in optimizing the parameters for improved performance.
Discussion
In this study, the authors address the optimization of fused deposition modeling (FDM) process parameters—layer height, infill density, nozzle temperature, and print speed—by employing a Taguchi L9(3⁴) orthogonal array combined with analysis of variance (ANOVA) and grey relational analysis (GRA). The primary challenge identified is the conflicting nature of the parameters affecting tensile strength and print time, necessitating a systematic approach to balance these trade-offs. The proposed methodology significantly reduces the number of required experimental runs from 81 to just 9, while still providing a statistically robust evaluation of the parameters’ contributions to the responses.
The findings reveal that infill density is the most influential factor for tensile strength, accounting for 68.99% of the variance, followed by layer height at 51.77%. In contrast, layer height is the dominant factor affecting print time, contributing 51.77% to its variance. The optimal settings for tensile strength (0.10 mm layer height, 75% infill density, 220 °C nozzle temperature, and 40 mm/s print speed) differ from those for print time (0.30 mm layer height, 25% infill density, 220 °C nozzle temperature, and 80 mm/s print speed), with only the nozzle temperature being consistent across both optimizations. The GRA approach successfully reconciles these conflicting responses, leading to a compromise setting of 0.30 mm layer height, 75% infill density, 220 °C nozzle temperature, and 80 mm/s print speed. This study demonstrates the effectiveness of the Taguchi-ANOVA-GRA framework as a practical tool for optimizing FDM processes in resource-constrained environments.
