DOI: https://doi.org/10.37394/232029.2026.5.1
تاريخ النشر: 2026-01-28
المؤلف: Shah Nusrat Jahan Shanta وآخرون
الموضوع الرئيسي: الهندسة النووية الديناميكا الحرارية
نظرة عامة
تتناول ورقة البحث مبادرة بنغلاديش لتعزيز قدراتها في البحث النووي من خلال تطوير مفاعل بحثي متعدد الأغراض (MPRR) بقدرة 10-20 ميغاوات باستخدام وقود اليورانيوم منخفض التخصيب (LEU) من نوع VVR-KN. تهدف هذه الترقية إلى معالجة قيود المفاعل الحالي TRIGA Mark-II بقدرة 3 ميغاوات، خاصة فيما يتعلق بتحديات إمدادات الوقود. تستخدم الدراسة نهج تفاعل السوائل والهياكل (FSI) باستخدام ANSYS Workbench لتحليل الاستجابات الحرارية والهيدروليكية والهيكلية لمجموعة وقود المفاعل تحت ظروف الحالة الثابتة. من خلال دمج الديناميكا الحرارية الحاسوبية (CFD) مع ميكانيكا الهياكل، تقيم البحث سلوك تدفق المبرد، وتوزيع درجة الحرارة، وفقدان الضغط، واكتساب الطاقة، والتشوهات، والضغوط، والانفعالات الناتجة عن قضبان الوقود. تم إجراء تحليل مقارن بين محللات ANSYS Fluent وANSYS CFX لضمان دقة النتائج وتناسقها.
تؤكد النتائج التطبيق الفعال لإطار عمل FSI في التنبؤ بهوامش الأمان الحرارية الميكانيكية لمجموعة أمان MPRR. ينجح دمج محللات CFD والهيكلية داخل ANSYS Workbench في محاكاة التفاعلات بين ديناميات المبرد والتشوهات الهيكلية. بالإضافة إلى ذلك، يبرز دراسة حساسية الشبكة أهمية جودة الشبكة في المحاكاة. تظهر نتائج التحقق توافق وموثوقية كل من محللات Fluent وCFX لتقييم سلامة الوقود النووي، مما يعزز ملاءمتها للتطبيقات المستقبلية في تحليل سلامة المفاعل.
مقدمة
تسلط المقدمة الضوء على الدور الحاسم لمفاعلات البحث في البحث العلمي، والتدريب، وإنتاج النظائر المشعة عبر مجالات متعددة، بما في ذلك علوم المواد والفيزياء النووية. على وجه الخصوص، كان مفاعل بنغلاديش TRIGA Mark-II بقدرة 3 ميغاوات، الذي يعمل منذ عام 1986، محورياً لتطبيقات مثل تحليل تنشيط النيوترونات وإنتاج النظائر المشعة. ومع ذلك، تواجه استدامة المفاعل تحديات بسبب إمدادات الوقود المحدودة من هيدريد اليورانيوم-الزركونيوم، مما دفع لجنة الطاقة النووية في بنغلاديش إلى السعي للحصول على مفاعل بحثي متعدد الأغراض (MPRR) بقدرة أعلى تتراوح بين 10-20 ميغاوات، باستخدام وقود اليورانيوم منخفض التخصيب (LEU).
تؤكد هذه الفقرة أيضاً على أهمية التحليل الحراري الميكانيكي في فهم تدرجات الحرارة والأداء الميكانيكي لعناصر الوقود تحت ظروف تشغيل متغيرة. وتبرز ضرورة التحليل الهيكلي لتقييم السلوك الميكانيكي لمجموعات الوقود وضمان سلامة وموثوقية المفاعل. يُقترح إدخال طرق عددية متقدمة، مثل تفاعل السوائل والهياكل (FSI)، لتعزيز تحليل السلوك المترابط بين تدفق المبرد والتشوه الهيكلي، مما يحسن أداء وسلامة مجموعات وقود المفاعل. يهدف مبدأ التحكم في الواجهة المقترح إلى تحسين التفاعل بين القوى السائلة والهيكلية، وهو أمر حاسم للحفاظ على سلامة ووظائف نظام المفاعل.
طرق
تستخدم المنهجية المعتمدة في الدراسة الحرارية الميكانيكية لمجموعة وقود MPRR نهج تفاعل السوائل والهياكل (FSI) المدمج داخل ANSYS. تلتقط هذه الطريقة بشكل فعال الاعتماديات المتبادلة لتدفق السوائل، ونقل الحرارة، والتشوه الهيكلي من خلال عملية زمنية تكرارية. تبدأ المحاكاة ببناء هندسة مجموعة الوقود، مع تحديد مجالات منفصلة للمناطق السائلة والصلبة لتسهيل تعريفات حدود FSI الواضحة. يدير وحدة محلل Fluent/CFX تحليل الديناميكا الحرارية الحاسوبية (CFD)، حيث يحسب توزيع السرعة والضغط ودرجات الحرارة في المبرد، بينما يتناول المحلل الميكانيكي الإجهاد الحراري والتشوه في ألواح الوقود.
تم إجراء محاكاة FSI ثنائية الاتجاه باستخدام ANSYS Workbench، حيث تتبادل المحللات السائلة والهيكلية البيانات بشكل تكراري حتى يتم تحقيق التقارب. يحسب محلل CFD المعلمات اللازمة، والتي يتم نقلها بعد ذلك إلى المحلل الهيكلي لتحليل الإجهاد والتشوه. تشمل معايير التقارب لمجال CFD بقايا معادلات الاستمرارية، والزخم، والطاقة التي تقل عن \(10^{-5}\)، وللمجال الهيكلي، يجب أن تكون التغيرات النسبية في الإزاحة والإجهاد أقل من \(1 \times 10^{-4}\). تم إجراء دراسة تقارب الشبكة باستخدام تكوينات مختلفة، وكشفت أن حجم شبكة 3 مم يوفر توازناً بين الكفاءة الحاسوبية ودقة الحل، حيث كانت الفروقات في التشوه الكلي والإجهاد المكافئ بين الشبكات 3 مم و3.4 مم ضئيلة (0.45% و0.2%، على التوالي). أظهر حجم الشبكة المختار 3 مم قيم انحراف مقبولة، مما يضمن نتائج عالية الجودة للتحليلات اللاحقة.
نتائج
سلطت نتائج تحليل محاكاة تفاعل السوائل والهياكل (FSI) الحرارية الميكانيكية الضوء على عدة مؤشرات أداء رئيسية، بما في ذلك التشوه الهيكلي، وإجهاد فون ميسيس، وتوزيع الانفعال، والطاقة الكلية للانفعال المرن، وخطوط تدفق السرعة. كانت هذه المقاييس ضرورية لتقييم التفاعل بين المكونات السائلة والهيكلية تحت ظروف متغيرة.
بالإضافة إلى ذلك، تم إجراء تحقق مقارن لتحديد التناقضات المحددة المتعلقة بالمحللات المستخدمة في المحاكاة. كان الهدف من هذا التحقق هو توضيح الآثار الفيزيائية لهذه التباينات، مما يعزز موثوقية نتائج المحاكاة ويوفر رؤى حول الميكانيكا الأساسية لظواهر FSI.
نقاش
في قسم النقاش من ورقة البحث، تم توضيح المعادلات الحاكمة للمحاكاة المترابطة، مع التركيز على معادلة الطاقة لتحليل الديناميكا الحرارية الحاسوبية (CFD) ونموذج الاضطراب القياسي k-ε. تصف معادلة الطاقة الحفاظ على الطاقة داخل السائل، مع تضمين مصطلحات لكثافة السائل ($\rho$)، والطاقة الكلية لكل وحدة حجم ($E$)، ومتجه السرعة ($u$)، والموصلية الحرارية ($k$)، ودرجة الحرارة ($T$)، وآليات نقل الطاقة ($\Phi$). توضح معادلات نموذج k-ε ديناميات الاضطراب، مع معلمات مثل إنتاج الاضطراب ($P$) ومعدل التبدد ($\epsilon$). يتم تحديد معلمات المحاكاة، بما في ذلك سرعة المدخل، ودرجة الحرارة، والضغط، وتُعرض النتائج، مما يشير إلى أن كل من محللات Fluent وCFX تنتج أنماط تشوه وتوزيعات إجهاد متشابهة، مع إظهار Fluent قيم ذروة أعلى قليلاً.
يكشف تحليل خطوط تدفق السرعة أن Fluent يلتقط هياكل دوامية أدق، بينما ينتج CFX خطوط تدفق أكثر سلاسة. تُظهر كلتا المحللتين توزيع ضغط مدخل موحد، وهو أمر ضروري لتدفق المبرد المستقر، وتظهر توافقاً قوياً في توقعات درجة حرارة المخرج، مما يحقق نموذج الحرارة الهيدروليكية. يشير توزيع درجة الحرارة على طول ارتفاع الوقود إلى زيادة غير خطية، وهو أمر نموذجي لنقل الحرارة بالتوصيل. تُظهر دراسة حساسية علاقة خطية بين التغيرات في ظروف الحدود والاستجابات الهيكلية، مما يبرز قوة النموذج. بشكل عام، تُظهر الدراسة بنجاح تطبيق تفاعل السوائل والهياكل (FSI) في تحليل الاستجابات الحرارية الميكانيكية لمجموعات وقود مفاعل البحث، مؤكدة فعالية نهج المحاكاة المترابطة وأهمية إدارة ظروف الحدود بدقة للحفاظ على السلامة وسلامة الهيكل.
DOI: https://doi.org/10.37394/232029.2026.5.1
Publication Date: 2026-01-28
Author(s): Shah Nusrat Jahan Shanta et al.
Primary Topic: Nuclear Engineering Thermal-Hydraulics
Overview
The research paper discusses Bangladesh’s initiative to enhance its nuclear research capabilities by developing a 10-20 MW multi-purpose research reactor (MPRR) utilizing VVR-KN low-enriched uranium (LEU) fuel. This upgrade aims to address the limitations of the existing 3 MW TRIGA Mark-II reactor, particularly concerning fuel supply challenges. The study employs a fluid-structure interaction (FSI) approach using ANSYS Workbench to analyze the coupled thermal, hydraulic, and structural responses of the reactor’s fuel assembly under steady-state conditions. By integrating computational fluid dynamics (CFD) with structural mechanics, the research evaluates coolant flow behavior, temperature distribution, pressure drop, energy gains, and the resulting deformations, stresses, and strains of the fuel rods. A comparative analysis between ANSYS Fluent and ANSYS CFX solvers is conducted to ensure the accuracy and consistency of the results.
The findings confirm the effective application of the FSI framework in predicting the thermo-mechanical safety margins of the MPRR’s safety assembly. The coupling of CFD and structural solvers within ANSYS Workbench successfully simulates the interactions between coolant dynamics and structural deformations. Additionally, a mesh sensitivity study underscores the significance of mesh quality in simulations. The validation results demonstrate the concurrence and reliability of both Fluent and CFX solvers for nuclear fuel safety assessments, reinforcing their suitability for future applications in reactor safety analysis.
Introduction
The introduction highlights the critical role of research reactors in scientific research, training, and radioisotope production across various fields, including materials science and nuclear physics. Specifically, Bangladesh’s 3 MW TRIGA Mark-II reactor, operational since 1986, has been pivotal for applications such as neutron activation analysis and radioisotope production. However, the reactor’s sustainability is challenged by limited fuel supplies of uranium-zirconium hydride, prompting the Bangladesh Atomic Energy Commission to pursue a higher capacity multi-purpose research reactor (MPRR) with a power range of 10-20 MW, utilizing low-enriched uranium (LEU) fuel.
The section further emphasizes the importance of thermomechanical analysis in understanding the temperature gradients and mechanical performance of fuel elements under varying operational conditions. It underscores the necessity of structural analysis to assess the mechanical behavior of fuel assemblies and ensure reactor safety and reliability. The introduction of advanced numerical methods, such as Fluid-Structure Interaction (FSI), is proposed to enhance the analysis of the coupled behavior between coolant flow and structural deformation, thereby improving the performance and safety of reactor fuel assemblies. The proposed interface control principle aims to optimize the interaction between fluid and structural forces, which is crucial for maintaining the integrity and functionality of the reactor system.
Methods
The methodology employed in the thermo-mechanical study of the MPRR fuel assembly utilizes a coupled Fluid-Structure Interaction (FSI) approach within ANSYS. This method effectively captures the interdependencies of fluid flow, heat transfer, and structural deformation through an iterative time-stepping process. The simulation begins with the construction of the fuel assembly geometry, delineating separate domains for fluid and solid regions to facilitate clear FSI boundary definitions. The Fluent/CFX solver module manages the computational fluid dynamics (CFD) analysis, calculating velocity, pressure, and temperature distributions in the coolant, while the mechanical solver addresses thermal stress and deformation in the fuel plates.
A two-way FSI simulation is conducted using ANSYS Workbench, where fluid and structural solvers iteratively exchange data until convergence is achieved. The CFD solver computes the necessary parameters, which are then relayed to the structural solver for stress and deformation analysis. Convergence criteria for the CFD domain include residuals for continuity, momentum, and energy equations falling below \(10^{-5}\), and for the structural domain, relative changes in displacement and stress must be less than \(1 \times 10^{-4}\). A mesh convergence study was performed using various configurations, revealing that a mesh size of 3 mm provides a balance between computational efficiency and solution accuracy, as differences in total deformation and equivalent stress between 3 mm and 3.4 mm meshes were minimal (0.45% and 0.2%, respectively). The selected 3 mm mesh size exhibited acceptable skewness values, ensuring high-quality results for subsequent analyses.
Results
The results of the thermo-mechanical fluid-structure interaction (FSI) simulation analysis highlighted several key performance indicators, including structural deformation, von Mises stress, strain distribution, total elastic strain energy, and velocity streamlines. These metrics were essential for assessing the interaction between the fluid and structural components under varying conditions.
Additionally, a comparative validation was conducted to identify inconsistencies specific to the solvers used in the simulations. This validation aimed to elucidate the physical implications of these discrepancies, thereby enhancing the reliability of the simulation outcomes and providing insights into the underlying mechanics of the FSI phenomena.
Discussion
In the discussion section of the research paper, the governing equations for the coupled simulation are outlined, focusing on the energy equation for computational fluid dynamics (CFD) analysis and the standard k-ε turbulence model. The energy equation describes the conservation of energy within the fluid, incorporating terms for fluid density ($\rho$), total energy per unit volume ($E$), velocity vector ($u$), thermal conductivity ($k$), temperature ($T$), and energy transfer mechanisms ($\Phi$). The k-ε model equations detail the dynamics of turbulence, with parameters such as turbulence production ($P$) and dissipation rate ($\epsilon$). The simulation parameters, including inlet velocity, temperature, and pressure, are specified, and results are presented, indicating that both Fluent and CFX solvers yield similar deformation patterns and stress distributions, with Fluent showing slightly higher peak values.
The analysis of velocity streamlines reveals that Fluent captures finer vortical structures, while CFX produces smoother streamlines. Both solvers demonstrate a uniform inlet pressure distribution, essential for stable coolant flow, and exhibit strong agreement in outlet temperature predictions, validating the thermal-hydraulic model. The temperature distribution along the fuel height indicates a nonlinear increase, typical of convective heat transfer. A sensitivity analysis shows a linear relationship between variations in boundary conditions and structural responses, emphasizing the robustness of the model. Overall, the study successfully demonstrates the application of fluid-structure interaction (FSI) in analyzing the thermo-mechanical responses of research reactor fuel assemblies, confirming the efficacy of the coupled simulation approach and the importance of precise boundary condition management for maintaining safety and structural integrity.
