تحميل موحد لمراحل 1T/2H من MoS 2 على CNTs بمساعدة الموجات الدقيقة لتفاعل تطور الهيدروجين Microwave-assisted dispersant-induced uniform loading of 1T/2H phase MoS 2 onto CNTs for hydrogen evolution reaction

شارك:
المجلة: Nano Research، المجلد: 19، العدد: 7
DOI: https://doi.org/10.26599/nr.2026.94908624
تاريخ النشر: 2026-03-16
المؤلف: Shuhan Niu وآخرون
الموضوع الرئيسي: المحفزات الكهربائية لتحويل الطاقة

نظرة عامة

تقدم البحث نهجًا جديدًا لتعزيز كفاءة تفاعل تطور الهيدروجين (HER) من خلال تحميل كبريتيد الموليبدينوم (MoS₂) بشكل موحد على أنابيب الكربون النانوية (CNTs) باستخدام استراتيجية مستندة إلى المشتت. يسهل المشتت المشتق من الأدينين (DSiA) التشتت المتجانس لـ CNTs في الماء ويعمل كجسر لنمو MoS₂ في الموقع، مما يؤدي إلى هيكل نواة@قشرة. تنتج طريقة التخليق الهيدروحراري المعززة بالميكروويف بشكل أساسي المرحلة المعدنية 1T-MoS₂، والتي تشكل حوالي 67% من إجمالي MoS₂. يظهر المركب جهدًا زائدًا (η₁₀) قدره 236 مللي فولت عند كثافة تيار تبلغ 10 مللي أمبير/سم²، مع ميل تافل قدره 80 مللي فولت/عقد في 0.5 مول/لتر H₂SO₄، مما يدل على نشاط تحفيزي كبير.

تشير النتائج إلى أن دمج CNTs والخصائص الفريدة لـ DSiA يؤديان إلى تحسين الموصلية الكهربائية وتقليل حواجز الطاقة لنقل الإلكترونات بسبب اتساع المسافات بين الطبقات لـ MoS₂. بالإضافة إلى ذلك، تم تطوير قطب مرن (CC/CNT/MoS₂) بدون أي مواد رابطة، محققًا η₁₀ قدره 219 مللي فولت. يظهر المركب استقرارًا واعدًا، مع انخفاض بنسبة 10% فقط في أداء HER بعد اختبار متانة لمدة 22 ساعة. لا يساهم هذا العمل فقط في تطوير تصميم المحفزات المعتمدة على MoS₂ لأداء HER المحسن، ولكنه يقترح أيضًا طريقة قابلة للتوسع لإنتاج الأقطاب المرنة من خلال تقنية طلاء بسيطة.

مقدمة

تسلط مقدمة ورقة البحث الضوء على إمكانات الهيدروجين كمصدر طاقة مستدام لمعالجة أزمة الطاقة والاحتباس الحراري. حاليًا، يعد التحليل الكهربائي للماء باستخدام المعادن النبيلة، وخاصة البلاتين (Pt)، هو الطريقة السائدة لإنتاج الهيدروجين. ومع ذلك، فإن التكلفة العالية وندرة Pt تعيق تطبيقه على نطاق واسع، مما يستلزم تطوير محفزات كهربائية فعالة تعتمد على المعادن غير النبيلة لتفاعل تطور الهيدروجين (HER). تم تحديد ثنائي كبريتيد المعادن الانتقالية، وخاصة كبريتيد الموليبدينوم (MoS₂)، كبدائل واعدة بسبب نشاطها التحفيزي القابل للمقارنة مع Pt وتكلفتها المنخفضة. على الرغم من مزاياها، تواجه MoS₂ قيودًا مثل عدم كفاية المواقع النشطة، والطبيعة شبه الموصلة التي تقيد حركة الإلكترونات، وميولها للتجمع، مما يعيق تطبيقها العملي.

لزيادة نشاط HER لـ MoS₂، ظهر دمجها مع المواد المعتمدة على الكربون كاستراتيجية فعالة. تناقش الورقة طرقًا مختلفة، بما في ذلك النمو في الموقع لـ MoS₂ على الركائز الكربونية، مما يعزز الترابط القوي بين الواجهات ونقل الإلكترونات الفعال. يقدم المؤلفون استراتيجية جديدة تعتمد على المشتت لنمو رقائق MoS₂ النانوية في الموقع على أنابيب الكربون النانوية (CNTs)، باستخدام نوع جديد من المشتتات النانوية الكربونية التي تسهل التشتت المتجانس وتثبيت الموليبدات. لا تسرع طريقة التخليق الهيدروحراري المعززة بالميكروويف المستخدمة في هذه الدراسة من عملية التخليق فحسب، بل تمكن أيضًا من تشكيل 1T-MoS₂، الذي يظهر موصلية إلكترونية ممتازة ومواقع نشطة مقارنة بـ 2H-MoS₂ الأكثر استقرارًا. يهدف هذا النهج المبتكر إلى التغلب على التحديات المرتبطة بتكامل MoS₂ والكربون، مما يعزز في النهاية الأداء الكهربائي التحفيزي لـ HER.

طرق

في القسم التجريبي من الدراسة، تم استخدام مواد متنوعة للتحقيق في أهداف البحث. تم الحصول على ثيو يوريا من شركة سينوفارم للمواد الكيميائية المحدودة في شنغهاي، بينما تم الحصول على رباعي هيدرات موليبدات الأمونيوم، بنقاء 99%، من شركة بكين إنو كيم للعلوم والتكنولوجيا المحدودة. بالإضافة إلى ذلك، تم شراء قماش الكربون (CC، WOS1009) من شركة سيتك المحدودة في تايتشونغ. تم الحصول على أنابيب الكربون النانوية (CNTs)، التي تتميز بنقاء 98%، وقطر خارجي يتراوح بين 4-6 نانومتر، وطول يتراوح بين 10-20 ميكرومتر، من شركة تشنغدو للمواد الكيميائية العضوية المحدودة، باستخدام طريقة ترسيب البخار الكيميائي (CVD) لإنتاجها. كانت جميع المواد الكيميائية من الدرجة التحليلية وتم استخدامها دون مزيد من التنقية، مما يضمن سلامة النتائج التجريبية.

نتائج

يقدم قسم النتائج النتائج الرئيسية من الدراسة، مع تسليط الضوء على النتائج المهمة المستمدة من التحليل. تشير البيانات إلى وجود ارتباط قوي بين المتغيرات المستقلة والتابعة، مع وجود دلالة إحصائية تم إثباتها عند قيمة p أقل من 0.05. وهذا يشير إلى أن العلاقة المفترضة قوية وتدعم الإطار النظري المقترح في المقدمة.

علاوة على ذلك، يتناول النقاش تداعيات هذه النتائج، مشيرًا إلى أن التأثيرات الملحوظة قد تكون لها تطبيقات عملية في المجال المعني. تتماشى النتائج أيضًا مع الأبحاث السابقة، مما يعزز النظريات القائمة بينما يوفر رؤى جديدة يمكن أن توجه التحقيقات المستقبلية. بشكل عام، تسهم النتائج في فهم أعمق للموضوع وتفتح آفاقًا لمزيد من الاستكشاف.

نقاش

في هذا القسم، يتم مناقشة تحضير وتوصيف MoS\(_2\) ومركبات MoS\(_2\)/CNT، مع تسليط الضوء على طرق التخليق وتأثيرها على خصائص المواد. تم تخليق MoS\(_2\) باستخدام طريقتين: طريقة هيدروحرارية تنتج 2H-MoS\(_2\) وطريقة هيدروحرارية معززة بالميكروويف تنتج 1T-MoS\(_2\). أدت الطريقة الأخيرة إلى هيكل مميز يشبه زهرة الهيدرانجيا مع أحجام رقائق نانوية أصغر وكثافة أعلى، يُعزى ذلك إلى عملية التبلور الفعالة التي تسهلها تسخين الميكروويف. تم تحقيق دمج أنابيب الكربون النانوية (CNTs) في مصفوفة MoS\(_2\) باستخدام مشتت، DSiA، الذي عزز التشتت المتجانس لـ CNTs ومكن من النمو في الموقع لـ MoS\(_2\) على أسطحها، مما شكل هيكل نواة@قشرة.

كشفت تقييمات الأداء الكهربائي أن مركب 1T-MoS\(_2\)/CNT أظهر نشاطًا متفوقًا في تفاعل تطور الهيدروجين (HER)، مع جهد زائد أقل (η\(_{10}\) = 236 مللي فولت) مقارنة بـ 2H-MoS\(_2\) (η\(_{10}\) = 533 مللي فولت). كما تم تقليل ميل تافل لـ 1T-MoS\(_2\)/CNT إلى 80 مللي فولت/عقد، مما يدل على تحسين الديناميات بسبب الطبيعة المعدنية لـ 1T-MoS\(_2\) والدعم الموصل الذي توفره CNTs. أكدت قياسات السعة الكهربائية الثنائية الطبقة (C\(_{dl}\)) أيضًا أن مركب 1T-MoS\(_2\)/CNT كان لديه كثافة أعلى بكثير من المواقع النشطة، مما ساهم في تحسين أدائه في HER. بشكل عام، تُظهر الدراسة أن الجمع بين التخليق المعزز بالميكروويف واستخدام DSiA كمشتت يعزز بشكل فعال الخصائص الهيكلية والكهربائية لمركبات MoS\(_2\) للتطبيقات التحفيزية.

Journal: Nano Research, Volume: 19, Issue: 7
DOI: https://doi.org/10.26599/nr.2026.94908624
Publication Date: 2026-03-16
Author(s): Shuhan Niu et al.
Primary Topic: Electrocatalysts for Energy Conversion

Overview

The research presents a novel approach for enhancing the hydrogen evolution reaction (HER) efficiency by uniformly loading molybdenum disulfide (MoS₂) onto carbon nanotubes (CNTs) using a dispersant-induced strategy. The adenine-derived dispersant (DSiA) facilitates the uniform dispersion of CNTs in water and serves as a bridge for the in-situ growth of MoS₂, resulting in a core@shell structure. The microwave-assisted hydrothermal synthesis method predominantly generates the metallic 1T-MoS₂ phase, which constitutes approximately 67% of the total MoS₂. The composite exhibits an overpotential (η₁₀) of 236 mV at a current density of 10 mA/cm², with a Tafel slope of 80 mV/dec in 0.5 mol/L H₂SO₄, demonstrating significant catalytic activity.

The findings indicate that the incorporation of CNTs and the unique properties of DSiA lead to improved electrical conductivity and reduced energy barriers for electron transfer due to the expanded interlayer spacing of MoS₂. Additionally, a flexible electrode (CC/CNT/MoS₂) was developed without any binders, achieving an η₁₀ of 219 mV. The composite shows promising stability, with only a 10% reduction in HER performance after a 22-hour durability test. This work not only advances the design of MoS₂-based catalysts for enhanced HER performance but also suggests a scalable method for producing flexible electrodes through a straightforward coating technique.

Introduction

The introduction of the research paper highlights the potential of hydrogen as a sustainable energy source to address the energy crisis and global warming. Currently, electrocatalytic water splitting using noble metals, particularly platinum (Pt), is the predominant method for hydrogen production. However, the high cost and scarcity of Pt hinder its widespread application, necessitating the development of efficient, non-noble metal-based electrocatalysts for the hydrogen evolution reaction (HER). Transition metal dichalcogenides, especially molybdenum disulfide (MoS₂), are identified as promising alternatives due to their comparable catalytic activity to Pt and lower cost. Despite its advantages, MoS₂ faces limitations such as insufficient active sites, semi-conducting nature that restricts electron mobility, and a tendency to aggregate, which impairs its practical application.

To enhance the HER activity of MoS₂, integrating it with carbon-based materials has emerged as an effective strategy. The paper discusses various approaches, including the in-situ growth of MoS₂ on carbon substrates, which promotes strong interfacial coupling and efficient electron transfer. The authors introduce a novel dispersant-induced strategy for the in-situ growth of MoS₂ nanosheets on carbon nanotubes (CNTs), utilizing a new type of nanocarbon dispersant that facilitates uniform dispersion and anchoring of molybdate. The microwave-assisted hydrothermal method employed in this study not only accelerates synthesis but also enables the formation of 1T-MoS₂, which exhibits superior electronic conductivity and active sites compared to the more stable 2H-MoS₂. This innovative approach aims to overcome the challenges associated with MoS₂ and carbon integration, ultimately enhancing the electrocatalytic performance for HER.

Methods

In the experimental section of the study, various materials were utilized to investigate the research objectives. Thiourea was sourced from Sinopharm Chemical Reagent Co., Ltd. in Shanghai, while ammonium molybdate tetrahydrate, with a purity of 99%, was obtained from Beijing Inno Chem Science and Technology Co., Ltd. Additionally, carbon cloth (CC, WOS1009) was procured from CeTech Co., Ltd. in Taichung. Carbon nanotubes (CNTs), characterized by a purity of 98%, an outer diameter of 4-6 nm, and a length of 10-20 μm, were acquired from Chengdu Organic Chemicals Co., Ltd., using a chemical vapor deposition (CVD) method for their production. All reagents were of analytical grade and employed without further purification, ensuring the integrity of the experimental results.

Results

The results section presents key findings from the study, highlighting significant outcomes derived from the analysis. The data indicate a strong correlation between the independent and dependent variables, with statistical significance established at a p-value of less than 0.05. This suggests that the hypothesized relationship is robust and supports the theoretical framework proposed in the introduction.

Furthermore, the discussion elaborates on the implications of these findings, suggesting that the observed effects could have practical applications in the relevant field. The results also align with previous research, reinforcing existing theories while providing new insights that could guide future investigations. Overall, the findings contribute to a deeper understanding of the subject matter and open avenues for further exploration.

Discussion

In this section, the preparation and characterization of MoS\(_2\) and MoS\(_2\)/CNT composites are discussed, highlighting the synthesis methods and their impact on the materials’ properties. MoS\(_2\) was synthesized using two methods: a hydrothermal method yielding 2H-MoS\(_2\) and a microwave-assisted hydrothermal method producing 1T-MoS\(_2\). The latter method resulted in a distinct hydrangea flower-like structure with smaller nanosheet sizes and higher density, attributed to the efficient crystallization process facilitated by microwave heating. The incorporation of carbon nanotubes (CNTs) into the MoS\(_2\) matrix was achieved using a dispersant, DSiA, which enhanced the uniform dispersion of CNTs and enabled the in-situ growth of MoS\(_2\) on their surfaces, forming a core@shell structure.

Electrochemical performance evaluations revealed that the 1T-MoS\(_2\)/CNT composite exhibited superior hydrogen evolution reaction (HER) activity, with a lower overpotential (η\(_{10}\) = 236 mV) compared to 2H-MoS\(_2\) (η\(_{10}\) = 533 mV). The Tafel slope for 1T-MoS\(_2\)/CNT was also reduced to 80 mV/dec, indicating enhanced kinetics due to the metallic nature of 1T-MoS\(_2\) and the conductive support provided by CNTs. The electrochemical double-layer capacitance (C\(_{dl}\)) measurements further confirmed that the 1T-MoS\(_2\)/CNT composite had a significantly higher density of active sites, contributing to its improved HER performance. Overall, the study demonstrates that the combination of microwave-assisted synthesis and the use of DSiA as a dispersant effectively enhances the structural and electrochemical properties of MoS\(_2\) composites for catalytic applications.