تخليق NiMo–NiMoO x مع واجهة بلورية/غير بلورية لتحسين تفاعل تطور الهيدروجين
Synthesis of NiMo–NiMoO x with crystalline/amorphous heterointerface for enhanced hydrogen evolution reaction

شارك:
المجلة: Nano Research، المجلد: 18، العدد: 5
DOI: https://doi.org/10.26599/nr.2025.94907368
تاريخ النشر: 2025-03-18
المؤلف: Xinjia Tan وآخرون
الموضوع الرئيسي: المحفزات الكهربائية لتحويل الطاقة

نظرة عامة

تقدم البحث تطوير محفز كهربائي من NiMo-NiMoO$_x$ بلوري-غير بلوري، تم تصنيعه من خلال طريقة بسيطة للإيداع الكهربائي، تهدف إلى تعزيز كفاءة المحفزات الكهربائية القائمة على المعادن/الأكسيد لتفاعل تطور الهيدروجين القلوي (HER). يظهر دمج ذرات الموليبدينوم (Mo) أنه يعدل بشكل فعال الواجهة بين الأطوار البلورية وغير البلورية، مما يحسن الهيكل الإلكتروني للمواقع النشطة. تعرض هذه الهيكلية الفريدة أداءً استثنائيًا في HER، حيث تتطلب فقط 30 مللي فولت من الجهد الزائد لتحقيق كثافة تيار تبلغ 10 مللي أمبير·سم$^{-2}$ في 1.0 م KOH، إلى جانب استقرار ملحوظ على مدى 80 ساعة مع تدهور طفيف.

علاوة على ذلك، يظهر المحفز الكهربائي متانة مثيرة للإعجاب في مياه البحر القلوية المحاكية، مع زيادة قدرها 18 مللي فولت فقط في الجهد الزائد بعد 96 ساعة من التشغيل. تشير حسابات نظرية الكثافة الوظيفية (DFT) إلى أن توزيع الإلكترونات عند الواجهة يقلل من حاجز الطاقة لتفكك الماء ويعزز امتصاص/إطلاق الهيدروجين، مما يحسن ديناميات HER. لا يسلط هذا البحث الضوء فقط على إمكانيات الهياكل البلورية-غير البلورية في تصميم المحفزات الكهربائية، بل يقدم أيضًا نهجًا قابلاً للتطبيق لإنشاء محفزات عالية الكفاءة ومنخفضة التكلفة لتطبيقات التحليل الكهربائي لمياه البحر.

مقدمة

تسلط مقدمة ورقة البحث الضوء على أهمية الهيدروجين ($H_2$) كمصدر طاقة متجدد وصديق للبيئة، وهو أمر أساسي لمعالجة أزمة الطاقة والتحديات البيئية. تؤكد على إمكانيات الهيدروجين في مختلف القطاعات، بما في ذلك الطب والزراعة، وتناقش تقسيم المياه القلوية كطريقة قابلة للتطبيق تجاريًا لإنتاج الهيدروجين نظرًا لتكلفتها المنخفضة وسهولة صيانتها. ومع ذلك، فإن ديناميات تفاعل تطور الهيدروجين (HER) البطيئة تشكل حاجزًا أمام تقدمها. بينما يمكن أن تعزز المحفزات المعدنية النبيلة HER، فإن تكلفتها العالية وندرتها تحد من قابليتها الصناعية، مما يستلزم تطوير بدائل فعالة ومنخفضة التكلفة.

من بين المحفزات المعدنية غير الثمينة، حظيت Ni-NiO باهتمام بسبب وفرتها وتكلفتها المعقولة، حيث أظهرت نشاطًا كهربائيًا ممتازًا من خلال تأثير تآزري. تشير الأبحاث إلى أن تحسين نسبة Ni إلى NiO واستخدام استراتيجيات مثل بناء كربون ذو طبقات قليلة على Ni-NiO يمكن أن يعزز الأداء التحفيزي. تناقش المقدمة أيضًا النهج الواعد لهندسة الطور والواجهة باستخدام الهياكل البلورية-غير البلورية لتحسين نشاط HER. يوفر الطور غير البلوري ترتيبًا ذريًا غير منظم مع مواقع نشطة وفيرة، بينما يوفر الطور البلوري موصلية كهربائية عالية واستقرار. يهدف دمج هذه الأطوار إلى الاستفادة من مزاياها الخاصة، على الرغم من أن الاستكشاف الإضافي لتعديل واجهة الهيكلية مع ذرات إضافية، مثل الموليبدينوم (Mo)، لا يزال محدودًا.

طرق

في هذه الدراسة، تم تصنيع محفز NiMo-NiMoO$_x$ من خلال الإيداع الكهربائي على رغوة Ni التجارية عند 50 درجة مئوية مع معدل تحريك يبلغ 300 دورة في الدقيقة. قبل الإيداع الكهربائي، خضعت رغوة Ni لتنظيف بالموجات فوق الصوتية في الإيثانول، وحمض الهيدروكلوريك المخفف، والماء منزوع الأيونات لمدة 10 دقائق. كانت محلول الإيداع تتكون من NiCl$_2$•6H$_2$O وNa$_2$MoO$_4$ كمصادر معدنية، مع إضافة K$_4$P$_2$O$_7$، C$_2$H$_5$NO$_2$، وCO(NH$_2$)$_2$ كعوامل إضافية. احتوى المحلول الكهربائي على 0.6 م K$_4$P$_2$O$_7$، 0.3 م C$_2$H$_5$NO$_2$، 1 م CO(NH$_2$)$_2$، 0.25 م NiCl$_2$•6H$_2$O، و0.01 م Na$_2$MoO$_4$. تم إجراء عملية الإيداع الكهربائي عند كثافة تيار تبلغ 200 مللي أمبير·سم$^{-2}$ لمدة 20 دقيقة.

للمقارنة، تم تصنيع محفز Ni-NiO$_x$ باستخدام طريقة مشابهة، ولكن دون تضمين Na$_2$MoO$_4$ في المحلول. تم توفير تفاصيل حول خصائص المواد والقياسات الكهروكيميائية المتعلقة بهذه المحفزات في المواد التكميلية الإلكترونية (ESM).

نتائج

تركز نتائج هذه الدراسة على خصائص الامتصاص وأداء تفاعل تطور الهيدروجين (HER) لمحفزات Ni-NiO$_x$ وNiMo-NiMoO$_x$، كما تم التحقيق فيها من خلال حسابات نظرية الكثافة الوظيفية (DFT) وتقنيات التوصيف المختلفة. كشفت حسابات DFT أن H$_2$O تمتص بشكل تفضيلي على موقع Ni1 من Ni-NiO$_x$ بطاقة امتصاص تبلغ -2.04 إلكترون فولت، بينما تفضل ذرات H موقع Ni3 بطاقة ربط تبلغ -1.38 إلكترون فولت. يُقترح أن تحدث عملية HER عند الواجهة بين Ni البلوري وNiO$_x$ غير البلوري، حيث تنخفض طاقات الامتصاص مع زيادة المسافة من الواجهة. في حالة NiMo-NiMoO$_x$، يغير دمج ذرات Mo بشكل كبير طاقات الامتصاص، حيث تظهر H$_2$O طاقة امتصاص أقل تبلغ -1.22 إلكترون فولت على موقع Mo2، مما يسهل تفكك الماء ويعزز تطور H$_2$.

أكدت التوصيف من خلال حيود الأشعة السينية (XRD) والميكروسكوب الإلكتروني الماسح (SEM) على نجاح تصنيع الهيكل البلوري-غير البلوري NiMo-NiMoO$_x$، كاشفة عن أحجام جزيئات أصغر وتحسن في المحبة للماء مقارنةً بـ Ni-NiO$_x$. أظهر الأداء الكهربائي لـ NiMo-NiMoO$_x$ في محلول 1 م KOH نشاطًا متفوقًا في HER واستقرارًا، مع تغيير طفيف في الجهد على مدى 80 ساعة عند كثافة تيار تبلغ 10 مللي أمبير·سم$^{-2}$. علاوة على ذلك، حافظ المحفز على أداء جيد في مياه البحر القلوية المحاكية، محققًا كفاءة فارادائية تقارب 100% لإنتاج الهيدروجين. تختتم الدراسة بأن إدخال ذرات Mo يعدل بشكل فعال الهيكل الإلكتروني ويعزز الخصائص التحفيزية، مما يجعل NiMo-NiMoO$_x$ مرشحًا واعدًا لإنتاج الهيدروجين بكفاءة في البيئات القلوية.

مناقشة

في هذه الدراسة، قام المؤلفون بتصنيع هيكل بلوري-غير بلوري من NiMo-NiMoO$_x$ واستكشاف علاقة الهيكل بالنشاط. وُجد أن إدخال ذرات الموليبدينوم (Mo) يقلل بشكل فعال من نسبة المنطقة البلورية إلى غير البلورية، مما يزيد من عدد الواجهات والمواقع النشطة. كشفت مطيافية امتصاص الأشعة السينية (XAS) وحسابات نظرية الكثافة الوظيفية (DFT) عن إعادة توزيع الإلكترونات بين ذرات Mo والنيكل (Ni)، مما أدى إلى تحسين الهيكل الإلكتروني. ونتيجة لذلك، أظهر محفز NiMo-NiMoO$_x$ حواجز طاقة أقل بكثير لتفكك الماء (0.134 إلكترون فولت) وقدرات محسنة لامتصاص/إطلاق الهيدروجين (0.240 إلكترون فولت)، مقارنةً بنظيره Ni-NiO$_x$ (0.736 إلكترون فولت و0.547 إلكترون فولت، على التوالي).

عرض الهيكل NiMo-NiMoO$_x$ أداءً كهربائيًا ملحوظًا، حيث يتطلب فقط 30 مللي فولت من الجهد الزائد لتحقيق كثافة تيار تبلغ 10 مللي أمبير·سم$^{-2}$ والحفاظ على الاستقرار على مدى 80 ساعة مع تدهور طفيف. علاوة على ذلك، أظهر أداءً ممتازًا في مياه البحر القلوية المحاكية، مستمرًا في التشغيل لمدة 96 ساعة مع زيادة قدرها 18 مللي فولت فقط في الجهد الزائد. تؤكد هذه النتائج على إمكانيات محفز NiMo-NiMoO$_x$ لتقسيم مياه البحر القلوية بكفاءة، المنسوبة إلى التأثيرات التآزرية لأطواره البلورية وغير البلورية، وتقدم نهجًا جديدًا لتعديل الواجهات في الهياكل.

Journal: Nano Research, Volume: 18, Issue: 5
DOI: https://doi.org/10.26599/nr.2025.94907368
Publication Date: 2025-03-18
Author(s): Xinjia Tan et al.
Primary Topic: Electrocatalysts for Energy Conversion

Overview

The research presents the development of a crystalline-amorphous NiMo-NiMoO$_x$ electrocatalyst, synthesized through a simple electrodeposition method, aimed at enhancing the efficiency of metal/oxide-based electrocatalysts for the alkaline hydrogen evolution reaction (HER). The incorporation of molybdenum (Mo) atoms is shown to effectively modulate the interface between crystalline and amorphous phases, improving the electronic structure of active sites. This unique heterostructure exhibits exceptional HER performance, requiring only 30 mV overpotential to achieve a current density of 10 mA·cm$^{-2}$ in 1.0 M KOH, alongside remarkable stability over 80 hours with minimal degradation.

Furthermore, the electrocatalyst demonstrates impressive durability in simulated alkaline seawater, with only an 18 mV increase in overpotential after 96 hours of operation. Density functional theory (DFT) calculations indicate that the electron distribution at the interface reduces the energy barrier for water dissociation and optimizes hydrogen adsorption/desorption, thereby enhancing HER kinetics. This study not only highlights the potential of crystalline-amorphous heterostructures in electrocatalyst design but also provides a viable approach for creating high-efficiency, low-cost catalysts for seawater electrolysis applications.

Introduction

The introduction of the research paper highlights the significance of hydrogen ($H_2$) as a renewable and eco-friendly energy source, essential for addressing the energy crisis and environmental challenges. It emphasizes the potential of hydrogen in various sectors, including medicine and agriculture, and discusses alkaline water splitting as a commercially viable method for hydrogen production due to its low cost and ease of maintenance. However, the sluggish kinetics of the hydrogen evolution reaction (HER) pose a barrier to its advancement. While noble-metal catalysts can enhance HER, their high cost and scarcity limit their industrial applicability, necessitating the development of low-cost, efficient alternatives.

Among non-precious metal catalysts, Ni-NiO has garnered attention due to its abundance and affordability, demonstrating excellent electrocatalytic activity through a synergistic effect. Research indicates that optimizing the Ni to NiO ratio and employing strategies such as constructing few-layered carbon on Ni-NiO can enhance catalytic performance. The introduction also discusses the promising approach of phase and interface engineering using crystalline-amorphous heterostructures to improve HER activity. The amorphous phase offers a disordered atomic arrangement with abundant active sites, while the crystalline phase provides high electrical conductivity and stability. The integration of these phases aims to leverage their respective advantages, although further exploration into modulating the heterostructure’s interface with additional atoms, such as molybdenum (Mo), remains limited.

Methods

In this study, the NiMo-NiMoO$_x$ catalyst was synthesized through electrodeposition on commercial Ni foam at 50 °C with a stirring rate of 300 rpm. Prior to the electrodeposition, the Ni foam underwent ultrasonic cleaning in ethanol, diluted HCl, and deionized water for 10 minutes. The deposition solution comprised NiCl$_2$•6H$_2$O and Na$_2$MoO$_4$ as metal sources, with K$_4$P$_2$O$_7$, C$_2$H$_5$NO$_2$, and CO(NH$_2$)$_2$ included as additional agents. The electrolyte contained 0.6 M K$_4$P$_2$O$_7$, 0.3 M C$_2$H$_5$NO$_2$, 1 M CO(NH$_2$)$_2$, 0.25 M NiCl$_2$•6H$_2$O, and 0.01 M Na$_2$MoO$_4$. The electrodeposition process was conducted at a current density of 200 mA·cm$^{-2}$ for 20 minutes.

For comparison, the Ni-NiO$_x$ catalyst was synthesized using a similar method, but without the inclusion of Na$_2$MoO$_4$ in the solution. Detailed material characterizations and electrochemical measurements related to these catalysts are provided in the Electronic Supplementary Material (ESM).

Results

The results of this study focus on the adsorption properties and hydrogen evolution reaction (HER) performance of Ni-NiO$_x$ and NiMo-NiMoO$_x$ catalysts, as investigated through density functional theory (DFT) calculations and various characterization techniques. DFT calculations revealed that H$_2$O preferentially adsorbs on the Ni1 site of Ni-NiO$_x$ with an adsorption energy of -2.04 eV, while H atoms favor the Ni3 site with a binding energy of -1.38 eV. The HER process is suggested to occur at the interface between crystalline Ni and amorphous NiO$_x$, where the adsorption energies decrease with distance from the interface. In the case of NiMo-NiMoO$_x$, the incorporation of Mo atoms significantly alters the adsorption energies, with H$_2$O showing a lower adsorption energy of -1.22 eV on the Mo2 site, thus facilitating water dissociation and enhancing H$_2$ evolution.

Characterization through X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirmed the successful synthesis of the crystalline-amorphous NiMo-NiMoO$_x$ heterostructure, revealing smaller particle sizes and improved hydrophilicity compared to Ni-NiO$_x$. The electrocatalytic performance of NiMo-NiMoO$_x$ in a 1 M KOH solution demonstrated superior HER activity and stability, with a minimal voltage change over 80 hours at a current density of 10 mA·cm$^{-2}$. Furthermore, the catalyst maintained favorable performance in simulated alkaline seawater, achieving nearly 100% Faradaic efficiency for hydrogen production. The study concludes that the introduction of Mo atoms effectively modulates the electronic structure and enhances the catalytic properties, making NiMo-NiMoO$_x$ a promising candidate for efficient hydrogen production in alkaline environments.

Discussion

In this study, the authors synthesized a crystalline-amorphous NiMo-NiMoO$_x$ heterostructure and explored its structure-activity relationship. The introduction of molybdenum (Mo) atoms was found to effectively reduce the crystalline-to-amorphous area ratio, thereby increasing the number of interfaces and active sites. X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations revealed electron redistribution between Mo and nickel (Ni) atoms, leading to an optimized electronic structure. Consequently, the NiMo-NiMoO$_x$ catalyst demonstrated significantly lower energy barriers for water dissociation (0.134 eV) and enhanced hydrogen adsorption/desorption capacities (0.240 eV), compared to the Ni-NiO$_x$ counterpart (0.736 eV and 0.547 eV, respectively).

The NiMo-NiMoO$_x$ heterostructure exhibited remarkable electrocatalytic performance, requiring only 30 mV overpotential to achieve a current density of 10 mA·cm$^{-2}$ and maintaining stability over 80 hours with minimal decay. Furthermore, it demonstrated excellent performance in simulated alkaline seawater, sustaining operation for 96 hours with only an 18 mV increase in overpotential. These findings underscore the potential of the NiMo-NiMoO$_x$ catalyst for efficient alkaline seawater splitting, attributed to the synergistic effects of its crystalline and amorphous phases, and present a novel approach for modulating interfaces in heterostructures.