تشريح التكاليف وأداء الشركات: أدلة من بلجيكا
The anatomy of costs and firm performance: Evidence from Belgium

شارك:
المجلة: International Journal of Industrial Organization، المجلد: 105
DOI: https://doi.org/10.1016/j.ijindorg.2026.103264
تاريخ النشر: 2026-01-25
المؤلف: Jan De Loecker وآخرون
الموضوع الرئيسي: ابتكار الشركات والنمو

نظرة عامة

تتناول هذه القسم من ورقة البحث الهياكل التكلفية المتطورة للشركات في قطاع التصنيع البلجيكي، مع التركيز على نفقات المدخلات المتغيرة مقابل المدخلات الثابتة وتكاليف التشغيل. تكشف التحليلات عن اتجاه حيث تعتمد الشركات بشكل متزايد على المدخلات الثابتة وتكاليف التشغيل، مما يؤدي إلى دور متناقص للتكاليف المتغيرة مع مرور الوقت. يرتبط هذا التحول بمقاييس الأداء، حيث يظهر أنه مع انخفاض أهمية التكاليف المتغيرة، ترتفع كل من الهوامش ونسب الربح الإجمالي بشكل ملحوظ.

تشير النتائج إلى أن التقدم التكنولوجي يساهم بشكل كبير في اتساع الفجوة بين إيرادات الشركات ونفقات المدخلات المتغيرة. ومع ذلك، يبدو أن الزيادة في الهوامش تتجاوز ما هو ضروري للشركات للحفاظ على مستويات التعادل، مما يشير إلى أن القوة السوقية قد تلعب أيضًا دورًا. ومن الجدير بالذكر أن هذه الأنماط متسقة عبر مختلف الشركات والصناعات، مما يبرز اتجاهًا أوسع داخل قطاع التصنيع.

مقدمة

تسلط مقدمة هذه الورقة البحثية الضوء على الزيادات المتزايدة في الهوامش والأرباح التي لوحظت عبر مختلف الصناعات والدول، مما يثير الحاجة لفهم الأسباب الكامنة وراء ذلك. يحدد المؤلفون تفسيرين رئيسيين لنسبة المبيعات إلى نفقات المدخلات المتغيرة المتزايدة: التقدم التكنولوجي وزيادة القوة السوقية. ومع ذلك، فإن تفكيك هذه العوامل معقد بسبب ترابطها المحتمل والتحديات المرتبطة بقياس التكاليف المتغيرة والثابتة بدقة. تؤكد الورقة على أهمية التمييز بين نفقات المدخلات المتغيرة، التي يتم التقاطها عادةً بواسطة تكلفة البضائع المباعة (COGS)، وتكاليف التشغيل أو الثابتة، التي غالبًا ما يتم الخلط بينها في البيانات المالية.

باستخدام بيانات مفصلة على مستوى الشركات من قطاع التصنيع البلجيكي تمتد من 1985 إلى 2016، يهدف المؤلفون إلى فصل التكاليف الإنتاجية المتغيرة وغير المتغيرة. يستفيدون من ميزة فريدة من بيانات بلجيكا التي تسمح بتفكيك نفقات المدخلات الوسيطة إلى سلع (مواد خام) وخدمات (عوامل ثابتة أو تشغيلية). تكشف النتائج عن تحول علماني نحو زيادة الاعتماد على الخدمات وانخفاض في تكاليف المدخلات المتغيرة، مما يتماشى مع ارتفاع الهوامش والربحية. يتحدى هذا التحول التفسيرات التقليدية للهياكل التكلفية ويقترح أن الباحثين الذين يعتمدون فقط على مقاييس النفقات المجمعة قد يغفلون عن رؤى حاسمة حول ديناميات الهوامش والتغيير التكنولوجي. تسهم الدراسة في النقاش الأوسع حول القوة السوقية والكفاءة، مشيرة إلى أن الهياكل التكلفية المتغيرة للشركات مرتبطة بتحولات كبيرة في أداء الشركات مع مرور الوقت.

نقاش

في هذا القسم، يناقش المؤلفون تداعيات استخدام المدخلات الوسيطة في تقدير الهوامش ودوال الإنتاج، مع تسليط الضوء على تعقيدات التمييز بين التكاليف المتغيرة والثابتة. يجادلون بأن النهج الإنتاجي لتقدير الهوامش يقدم مزايا كبيرة، حيث يسمح باختيار أكثر دقة للمدخلات المتغيرة، وهو أمر حاسم لفهم التغيرات في الهوامش وأداء الشركات. يقدم المؤلفون مجموعة بيانات شاملة لشركات التصنيع البلجيكية من 1985 إلى 2016، مع التأكيد على أهمية تفكيك المدخلات الوسيطة إلى سلع وخدمات لالتقاط الطبيعة المتنوعة لتكاليف الإنتاج بشكل أفضل. يمكّن هذا التفكيك من تمييز أوضح بين التكاليف المتغيرة للبضائع المباعة (VCOGS) ونفقات الخدمات، التي غالبًا ما يتم تصنيفها بشكل خاطئ في الأطر المحاسبية التقليدية.

تستند الإطار التجريبي المقدم إلى منهجيات مثبتة لتقدير الهوامش، وإنتاجية الإيرادات، ونسب الربح، مع معالجة التحديات التي تطرحها وجود التكاليف الثابتة وتكاليف التشغيل ضمن فئة الخدمات. يجد المؤلفون أن متوسط الهوامش قد زاد بشكل ملحوظ خلال فترة الدراسة، مع تباين ملحوظ بين اتجاهات الهوامش ونسب الربح الصافي، مما يشير إلى أن ارتفاع الهوامش قد يكون مدفوعًا بالاعتماد المتزايد على تكاليف التشغيل بدلاً من التكاليف الإنتاجية المتغيرة البحتة. تكشف التحليلات عن انخفاض كبير في حصة تكلفة VCOGS جنبًا إلى جنب مع زيادة ملحوظة في نفقات الخدمات، مما يشير إلى تحول في الهيكل التكلفي لشركات التصنيع البلجيكية. يبرز هذا التحول ضرورة تصنيف المدخلات بدقة لتجنب استنتاجات مضللة حول العلاقة بين الهوامش والتكاليف وربحية الشركات.

Journal: International Journal of Industrial Organization, Volume: 105
DOI: https://doi.org/10.1016/j.ijindorg.2026.103264
Publication Date: 2026-01-25
Author(s): Jan De Loecker et al.
Primary Topic: Firm Innovation and Growth

Overview

This section of the research paper examines the evolving cost structures of firms in the Belgian manufacturing sector, focusing on variable input expenditure versus fixed inputs and overhead costs. The analysis reveals a trend where firms are increasingly relying on fixed inputs and overhead, leading to a diminished role of variable costs over time. This shift is linked to performance metrics, showing that as variable costs decrease in significance, both markups and gross profit ratios rise significantly.

The findings indicate that technological advancements contribute substantially to the widening gap between firms’ revenue and variable input expenditure. However, the increase in markups appears to exceed what is necessary for firms to maintain break-even levels, suggesting that market power may also play a role. Notably, these patterns are consistent across various firms and industries, highlighting a broader trend within the manufacturing sector.

Introduction

The introduction of this research paper highlights the increasing markups and profits observed across various industries and countries, prompting a need to understand the underlying causes. The authors identify two primary explanations for the rising sales-to-variable input expenditure ratio: technological advancements and increased market power. However, disentangling these factors is complex due to their potential interconnection and the challenges associated with accurately measuring variable and fixed costs. The paper emphasizes the importance of distinguishing between variable input expenditures, typically captured by Cost of Goods Sold (COGS), and fixed or overhead costs, which are often conflated in financial statements.

Utilizing detailed firm-level data from the Belgian manufacturing sector spanning from 1985 to 2016, the authors aim to separate variable and non-variable production costs. They leverage a unique feature of the Belgian data that allows for a breakdown of intermediate input expenditures into goods (raw materials) and services (fixed or overhead factors). The findings reveal a secular shift towards increased reliance on services and a decline in variable input costs, correlating with rising markups and profitability. This shift challenges conventional interpretations of cost structures and suggests that researchers relying solely on bundled expenditure measures may overlook critical insights into the dynamics of markups and technological change. The study contributes to the broader discourse on market power and efficiency, indicating that the changing cost structures of firms are linked to significant shifts in firm performance over time.

Discussion

In this section, the authors discuss the implications of using intermediate inputs in estimating markups and production functions, highlighting the complexities of distinguishing between variable and fixed costs. They argue that the production approach to markup estimation offers significant advantages, as it allows for a more accurate selection of variable inputs, which is crucial for understanding changes in markups and firm performance. The authors present a comprehensive dataset of Belgian manufacturing firms from 1985 to 2016, emphasizing the importance of breaking down intermediate inputs into goods and services to better capture the heterogeneous nature of production costs. This breakdown enables a clearer distinction between variable costs of goods sold (VCOGS) and service expenditures, which are often misclassified in traditional accounting frameworks.

The empirical framework introduced builds on established methodologies to estimate markups, revenue productivity, and profit ratios, while addressing the challenges posed by the presence of fixed and overhead costs within the service category. The authors find that the average markup has increased significantly over the study period, with a notable divergence between markup trends and net profit ratios, suggesting that rising markups may be driven by increased reliance on overhead costs rather than purely variable production costs. The analysis reveals a substantial decline in the cost share of VCOGS alongside a marked increase in service expenditures, indicating a shift in the cost structure of Belgian manufacturing firms. This shift underscores the necessity of accurately categorizing inputs to avoid misleading conclusions about the relationship between markups, costs, and firm profitability.