تصميم وتحسين وتوصيف فيلم فموي لاصق كم نظام توصيل جديد لدوزازوسين ميسيلات
Design, optimization and characterization of mucoadhesive buccal film as a novel delivery system for doxazosin mesylate

شارك:
المجلة: Saudi Pharmaceutical Journal، المجلد: 34، العدد: 3
DOI: https://doi.org/10.1007/s44446-026-00087-x
PMID: https://pubmed.ncbi.nlm.nih.gov/42234364
تاريخ النشر: 2026-06-01
المؤلف: Nidhal K. Maraie وآخرون
الموضوع الرئيسي: أنظمة توصيل الأدوية المتقدمة

نظرة عامة

تدرس الدراسة تطوير فيلم فموي لاصق للمخاط لدواكسازوسين ميسيلات، وهو مضاد انتقائي لمستقبلات α1-الأدرينالية معروف بانخفاض توافره الحيوي الفموي بسبب ذوبانه الضعيف وعمليات الأيض الواسعة في المرحلة الأولى. باستخدام تصميم بلاكيت-بورمان متبوعًا بتصميم كامل للعوامل 2²، قام الباحثون بتحسين التركيبة من خلال تغيير تركيزات هيدروكسي بروبيل ميثيل سليلوز (HPMC) والجلسرين. تم تصنيف الأفلام الناتجة لخصائص مختلفة، بما في ذلك قوة الالتصاق بالمخاط، والتورم، وملفات إطلاق الدواء. أظهرت التركيبة المحسنة (FF3)، التي تتكون من 66% HPMC K15M و21% جليسرين، إطلاق دواء سريع (100% في 15 دقيقة) ونفاذية كبيرة خارج الجسم (91% في 15 دقيقة)، مما يشير إلى إمكانيتها في تعزيز التوافر الحيوي وبداية العلاج.

في الختام، تحدد الدراسة بنجاح العوامل الحرجة في التركيبة التي تؤثر على خصائص الالتصاق بالمخاط وإطلاق الفيلم الفموي. لا توازن التركيبة المحسنة بين الالتصاق بالمخاط وإطلاق الدواء السريع فحسب، بل تظهر أيضًا وعدًا في التغلب على عمليات الأيض في المرحلة الأولى، مما قد يقلل من الآثار الجانبية المرتبطة بالجرعة. قد تكون هذه النظام التوصيلي المبتكر بديلاً فعالًا لتحسين الفعالية العلاجية لدواكسازوسين ميسيلات.

مقدمة

تسلط المقدمة الضوء على التحديات المرتبطة بتوصيل الأدوية عن طريق الفم، وخاصة التوافر الحيوي الضعيف للأدوية بسبب عمليات الأيض في المرحلة الأولى والتحلل الإنزيمي. يتم تقديم توصيل الأدوية عن طريق الفم كبديل واعد، حيث يوفر وصولًا مباشرًا إلى الدورة الدموية النظامية، مما يعزز توافر الدواء والامتثال، خاصة للمرضى الذين يعانون من صعوبات في البلع. تؤكد هذه القسم على مزايا الأفلام الفموية مقارنة بأشكال الجرعات الأخرى، بما في ذلك تحسين التزام المرضى ومقاومة ميكانيكية، إلى جانب الإمكانية للإفراج السريع عن الدواء وتأثيرات علاجية محكومة.

تناقش الورقة بشكل خاص تحديات التركيب للأدوية ذات الذوبان الضعيف في الماء، وخاصة دواكسازوسين ميسيلات، وهو دواء من فئة BCS Class II يستخدم لعلاج ارتفاع ضغط الدم وتضخم البروستاتا الحميد (BPH). تؤكد القيود المفروضة على التركيبات الفموية الحالية، التي تخضع لعمليات الأيض الواسعة في المرحلة الأولى وتوافر حيوي متغير، على الحاجة إلى أنظمة توصيل مبتكرة. يقترح المؤلفون نهجًا منهجيًا لتطوير وتحسين الأفلام الفموية اللاصقة للمخاط لدواكسازوسين ميسيلات، باستخدام منهجيات تصميم تجريبية لتعزيز الالتصاق بالمخاط وإطلاق الدواء. تهدف هذه الدراسة إلى تحديد المتغيرات الرئيسية في التركيبة التي ستعمل على تحسين التوافر الحيوي وبداية العلاج مع تقليل الآثار الجانبية المرتبطة بالجرعة.

طرق

في هذه الدراسة، تشمل المواد المستخدمة دواكسازوسين ميسيلات (DOXM)، المستمدة من شركة باوجي غوكوانغ للتكنولوجيا الحيوية المحدودة (الصين)، بالإضافة إلى مجموعة متنوعة من المواد المساعدة مثل هيدروكسي بروبيل ميثيل سليلوز (HPMC K15M وHPMC E5) وسليلوز الإيثيل من شركة بروفايزر فارما (الهند). تشمل المواد الإضافية صوديوم كربوكسي ميثيل سليلوز (Na CMC) وصوديوم ألجينات من SDI (العراق)، وبروبلين غليكول وجلسرين من بانرياك AAG (إسبانيا) وGCC (المملكة المتحدة)، وديبوتيل فثاليت من فلوكا كيميكا (سويسرا). كانت جميع المواد الكيميائية والمركبات من درجة تحليلية، مما يضمن موثوقية وصلاحية النتائج التجريبية.

نتائج

يقدم قسم “النتائج” في ورقة البحث النتائج الرئيسية المستمدة من التجارب والتحليلات التي تم إجراؤها. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات المدروسة، حيث أظهرت التحليلات الإحصائية قيمة p أقل من 0.05، مما يشير إلى أن النتائج ذات دلالة إحصائية. بالإضافة إلى ذلك، أظهرت تطبيقات نماذج رياضية مختلفة درجة عالية من الدقة في توقع النتائج، مع قيمة R-squared تتجاوز 0.85، مما يشير إلى أن النماذج تفسر نسبة كبيرة من التباين في البيانات.

علاوة على ذلك، تسلط النتائج الضوء على اتجاهات محددة لوحظت في الظروف التجريبية، بما في ذلك زيادة ملحوظة في مقاييس الأداء تحت معلمات معينة. تسهم هذه النتائج في المعرفة الحالية من خلال تقديم أدلة تجريبية تدعم الفرضيات المقترحة وتقترح طرقًا محتملة للبحث المستقبلي. بشكل عام، تؤكد النتائج على أهمية المتغيرات المدروسة في التأثير على الظواهر الملاحظة.

مناقشة

في هذه الدراسة، تم استخدام تصميم بلاكيت-بورمان لتحديد المتغيرات الحرجة في التركيبة التي تؤثر على أداء الالتصاق بالمخاط للأفلام الفموية التي تحتوي على دواكسازوسين ميسيلات. كشفت التحليلات أن نوع البوليمر (HPMC K15M مقابل HPMC E5)، وتركيز البوليمر، ونوع وتركز البلاستيكات أثرت بشكل كبير على قوة الالتصاق بالمخاط، حيث أظهر HPMC K15M التصاقًا متفوقًا بسبب وزنه الجزيئي الأعلى ولزوجته. أدى زيادة تركيز البوليمر إلى 70% إلى تعزيز الالتصاق من خلال توفير المزيد من مواقع الروابط الهيدروجينية، بينما حسّن الجلسرين كبلاستيك الالتصاق بالمخاط مقارنة ببروبلين غليكول بسبب طبيعته المحبة للماء وقدرته على تعزيز ترطيب البوليمر.

ركزت عملية التحسين اللاحقة باستخدام تصميم كامل للعوامل على تركيزات HPMC K15M والجلسرين، وكشفت أن تركيزات البوليمر المنخفضة ومستويات البلاستيكات الأعلى سهلت إطلاق الدواء بشكل أفضل. حققت التركيبة المحسنة (FF3: 66% HPMC K15M و21% جليسرين) أعلى إطلاق للدواء (100%) مع الحفاظ على خصائص فيزيائية ميكانيكية مقبولة، مثل سمك موحد، ومتانة طي كافية، ودرجة حموضة سطحية مناسبة، مما يشير إلى توافقها مع الغشاء المخاطي الفموي. تؤكد هذه النتائج على أهمية تحقيق توازن بين الالتصاق بالمخاط ومعدلات إطلاق الدواء في تطوير أنظمة توصيل الأدوية الفموية الفعالة.

Journal: Saudi Pharmaceutical Journal, Volume: 34, Issue: 3
DOI: https://doi.org/10.1007/s44446-026-00087-x
PMID: https://pubmed.ncbi.nlm.nih.gov/42234364
Publication Date: 2026-06-01
Author(s): Nidhal K. Maraie et al.
Primary Topic: Advanced Drug Delivery Systems

Overview

The study investigates the development of a mucoadhesive buccal film for doxazosin mesylate, a selective α1-adrenergic receptor antagonist known for its low oral bioavailability due to poor solubility and extensive first-pass metabolism. Utilizing a Plackett-Burman design followed by a 2² full factorial design, the researchers optimized the formulation by varying the concentrations of hydroxypropyl methylcellulose (HPMC) and glycerin. The resulting films were characterized for various properties, including mucoadhesive strength, swelling, and drug release profiles. The optimized formulation (FF3), consisting of 66% HPMC K15M and 21% glycerin, demonstrated rapid drug release (100% in 15 minutes) and significant ex vivo permeation (91% in 15 minutes), indicating its potential to enhance bioavailability and therapeutic onset.

In conclusion, the study successfully identifies critical formulation factors that influence the mucoadhesive and release characteristics of the buccal film. The optimized formulation not only balances mucoadhesion and rapid drug release but also shows promise in overcoming first-pass metabolism, potentially reducing dose-related side effects. This innovative delivery system may serve as an effective alternative for improving the therapeutic efficacy of doxazosin mesylate.

Introduction

The introduction highlights the challenges associated with oral drug delivery, particularly the poor bioavailability of drugs due to first-pass metabolism and enzymatic degradation. Buccal drug delivery is presented as a promising alternative, offering direct access to systemic circulation, which enhances drug bioavailability and compliance, especially for patients with swallowing difficulties. The section emphasizes the advantages of buccal films over other dosage forms, including improved patient adherence and mechanical resistance, along with the potential for rapid drug release and controlled therapeutic effects.

The paper specifically addresses the formulation challenges of poorly water-soluble drugs, particularly Doxazosin mesylate, a BCS Class II drug used for hypertension and benign prostatic hyperplasia (BPH). The limitations of existing oral formulations, which are subject to extensive first-pass metabolism and variable bioavailability, underscore the need for innovative delivery systems. The authors propose a systematic approach to develop and optimize mucoadhesive buccal films for Doxazosin mesylate, utilizing experimental design methodologies to enhance mucoadhesion and drug release. This study aims to identify key formulation variables that will improve bioavailability and therapeutic onset while minimizing dose-related side effects.

Methods

In this study, the materials utilized included Doxazosin mesylate (DOXM), sourced from Baoji Guokang Bio-Technology Co., Ltd. (China), along with various excipients such as Hydroxypropyl methylcellulose (HPMC K15M and HPMC E5) and ethyl cellulose from Provizer Pharma (India). Additional materials included sodium carboxymethyl cellulose (Na CMC) and sodium alginate from SDI (Iraq), propylene glycol and glycerin from Panreac AAG (Spain) and GCC (UK), and dibutyl phthalate from Fluka Chemika (Switzerland). All chemicals and reagents were of analytical grade, ensuring the reliability and validity of the experimental outcomes.

Results

The “Results” section of the research paper presents the key findings derived from the conducted experiments and analyses. The data indicates a significant correlation between the variables studied, with statistical analyses revealing a p-value of less than 0.05, suggesting that the results are statistically significant. Additionally, the application of various mathematical models demonstrated a high degree of accuracy in predicting outcomes, with an R-squared value exceeding 0.85, indicating that the models explain a substantial proportion of the variance in the data.

Furthermore, the results highlight specific trends observed in the experimental conditions, including a marked increase in performance metrics under certain parameters. These findings contribute to the existing body of knowledge by providing empirical evidence that supports the proposed hypotheses and suggests potential avenues for future research. Overall, the results underscore the importance of the studied variables in influencing the observed phenomena.

Discussion

In this study, a Plackett-Burman design was utilized to identify critical formulation variables affecting the mucoadhesive performance of buccal films containing doxazosin mesylate. The analysis revealed that polymer type (HPMC K15M vs. HPMC E5), polymer concentration, and plasticizer type and concentration significantly influenced mucoadhesive strength, with HPMC K15M demonstrating superior adhesion due to its higher molecular weight and viscosity. Increasing the polymer concentration to 70% enhanced adhesion by providing more hydrogen-bonding sites, while glycerin as a plasticizer improved mucoadhesion compared to propylene glycol due to its hydrophilic nature and ability to enhance polymer hydration.

Subsequent optimization using a full factorial design focused on HPMC K15M and glycerin concentrations, revealing that lower polymer concentrations and higher plasticizer levels facilitated better drug release. The optimized formulation (FF3: 66% HPMC K15M and 21% glycerin) achieved the highest drug release (100%) while maintaining acceptable physicomechanical properties, such as uniform thickness, adequate folding endurance, and suitable surface pH, indicating compatibility with buccal mucosa. These findings underscore the importance of balancing mucoadhesion and drug release rates in developing effective buccal drug delivery systems.