DOI: https://doi.org/10.1098/rsta.2025.0093
PMID: https://pubmed.ncbi.nlm.nih.gov/41988881
تاريخ النشر: 2026-04-16
المؤلف: Asma Nadia وآخرون
الموضوع الرئيسي: المواد النانوية للتفاعلات الحفزية
نظرة عامة
تبحث الدراسة في الهدرجة الانتقائية للبانزالديهيد إلى كحول البنزيل باستخدام ثلاثة محفزات مدعومة من البالاديوم (Pd): 5 wt% Pd/C، 5 wt% Pd/Al₂O₃، و1 wt% Pd/Al₂O₃، تحت ضغوط هيدروجين مرتفعة وعادية عند 313 كلفن. تكشف النتائج أن المحفزات تظهر ملفات تفاعل مميزة، حيث يحقق محفز 1 wt% Pd/Al₂O₃ انتقائية تقارب 100% لكحول البنزيل، بينما يظهر محفز 5 wt% Pd/C انتقائية كاملة للمنتج الثانوي غير المرغوب فيه، التولوين. ترتبط الاختلافات في انتقائية المنتج بعدد ذرات سطح Pd، حيث أن العدد الأصغر على محفز 1 wt% Pd/Al₂O₃ يعيق الهيدروجينوليسيس حركيًا لمدة تصل إلى 300 دقيقة.
تسلط الدراسة أيضًا الضوء على تفاوت كبير في ترددات الدوران (TOFs)، حيث يظهر محفز Pd/C تردد دوران أعلى بخمس مرات (115 دقيقة⁻¹) مقارنة بالمحفزات المدعومة بالألومينا (22.4 ± 1 دقيقة⁻¹)، وهو ما يُعزى إلى اختلافات في شكل بلورات Pd. تم تحديد طاقات التنشيط لتفاعلات الهدرجة والهيدروجينوليسيس على محفز 5 wt% Pd/Al₂O₃ لتكون 21.5 كيلوجول مول⁻¹ و47.1 كيلوجول مول⁻¹، على التوالي. علاوة على ذلك، يظهر أن خطوة الهيدروجينوليسيس تبدأ فقط بعد التحويل الكامل للبانزالديهيد، وتم تأسيس ديناميات الامتصاص التنافسية بين البانزالديهيد وكحول البنزيل. تشير النتائج إلى أنه بينما يمكن تقريب التفاعل بواسطة نموذج موقع واحد، هناك حاجة لمزيد من التحقيق لاستكشاف أدلة على مسار تعطيل انتقائي للتفاعل.
مقدمة
تناقش مقدمة ورقة البحث الأهمية الصناعية للهدرجة المحفزة غير المتجانسة للبانزالديهيد لإنتاج كحول البنزيل، وهو وسيط رئيسي في تخليق منتجات تجارية متنوعة. يبرز المؤلفون التحديات في تحقيق انتقائية عالية لكحول البنزيل بسبب التفاعلات المتنافسة، وخاصة الهيدروجينوليسيس، التي يمكن أن تؤدي إلى تكوين التولوين. تؤثر عوامل مثل تركيب المحفز، مادة الدعم، اختيار المذيب، وظروف التفاعل بشكل كبير على توزيع المنتج. تشير الدراسات السابقة إلى أن المحفزات القائمة على النيكل والبلاتين والبالاديوم تظهر مستويات نشاط متفاوتة، حيث يظهر Ni/SiO₂ نشاطًا أعلى بسبب تفاعلات المعدن والدعم المواتية.
تستكشف الورقة أيضًا تأثير الثوابت العازلة للمذيب على معدلات التفاعل وتلاحظ أن المذيبات القطبية يمكن أن تعقد التفاعل من خلال تسهيل الذوبان. ومن الجدير بالذكر أن المؤلفين يشيرون إلى نتائج تشير إلى أن تسمم الكبريت يمكن أن يعزز انتقائية محفزات Pd/C لكحول البنزيل، مما يحول توزيع المنتج بشكل مواتٍ. تهدف الدراسة إلى استخدام هدرجة البانزالديهيد كنظام نموذجي لفهم أفضل للأحداث المتسلسلة للهدرجة والهيدروجينوليسيس، مقترحة فحصًا مفصلًا لمحفزات Pd المدعومة تحت ظروف مختلفة. تهدف الدراسة إلى توضيح كيفية تحسين مواصفات المحفزات والمعلمات التشغيلية لتحسين انتقائية كحول البنزيل، مع ملاحظة ملفات تفاعل مميزة عبر درجات مختلفة من المحفزات.
طرق
في هذه الدراسة، تم إجراء تفاعلات الهدرجة في أوتوكلاف بسعة 500 مل تحت ظروف ضغط مرتفع. تضمنت الإعدادات التجريبية استخدام 100 ملغ من المحفز و300 مل من الميثانول، الذي تم تطهيره بالنيتروجين لإنشاء جو خامل. تم تقليل المحفز عن طريق تسخين وتحريك الخليط بسرعة 300 دورة في الدقيقة تحت تدفق مستمر من الهيدروجين لمدة 30 دقيقة. بعد ذلك، تم إدخال محلول يحتوي على حوالي 18 مليمول من البانزالديهيد أو كحول البنزيل في 50 مل من الميثانول، والذي تم تفريغه ثم إدخاله في المفاعل، الذي تم إغلاقه وضغطه إلى 4 بار. تم تحريك التفاعل بسرعة 900 دورة في الدقيقة، وتم مراقبة امتصاص الهيدروجين باستخدام وحدة تحكم تدفق الغاز الآلي.
تم إجراء التفاعلات دون أي مواد مساعدة، وتم تكرار جميع التجارب لضمان الموثوقية. تم جمع عينات سائلة بشكل دوري، وتم تصفيتها لإزالة المحفز المتبقي، وتم تحليلها خارج الخط باستخدام كروماتوغرافيا الغاز-السائل (GLC) مع كاشف تأين اللهب. تم إجراء معايرة GLC على حلول ذات تركيز معروف، مما أسفر عن خطأ قياسي أقل من ± 5%. تم اختبار ثلاثة محفزات مختلفة: محفز أساسي 5 wt% Pd/C، بالإضافة إلى 5 wt% Pd/Al₂O₃ و1 wt% Pd/Al₂O₃، لتقييم تأثير الدعم وتحميل المعدن على عملية الهدرجة.
نتائج
يقدم قسم النتائج في الدراسة توصيفًا شاملاً لمختلف محفزات البالاديوم (Pd)، بما في ذلك 5 wt% Pd/C، 5 wt% Pd/Al₂O₃، و1 wt% Pd/Al₂O₃، باستخدام تقنيات مثل ICP-OES، BET، امتصاص CO الكيميائي، TEM، XRD المسحوق، وطيف رامان. وُجد أن تحميلات البالاديوم كانت 4.98 ± 0.05% لـ 5 wt% Pd/C، 4.97 ± 0.28% لـ 5 wt% Pd/Al₂O₃، و0.74 ± 0.03% لـ 1 wt% Pd/Al₂O₃. تم قياس المساحات السطحية المحددة كالتالي: 533 ± 40.03، 188 ± 8.9، و336 ± 34.3 م²/غ، على التوالي. أشارت أنماط XRD إلى مراحل بلورية مميزة من Pd والألومينا، حيث عرض 5 wt% Pd/Al₂O₃ مرحلة مختلطة من γ-Al₂O₃ وθ-Al₂O₃. كشف امتصاص CO الكيميائي عن تغطية تشبع قدرها 113 ± 3 ميكرومول CO/غ (محفز) لـ 5 wt% Pd/C، مما أدى إلى حساب حجم جزيئات Pd بمتوسط 2.31 ± 0.06 نانومتر، بينما أظهرت المحفزات الأخرى أحجام جزيئات أكبر.
فيما يتعلق بالأداء التحفيزي، تم تقييم هدرجة البانزالديهيد عبر المحفزات المختلفة. أظهر محفز 5 wt% Pd/C تحويلًا سريعًا، محققًا أكثر من 99% تحويل خلال حوالي 10 دقائق، مع كحول البنزيل كوسيط والتولوين كمنتج رئيسي. بالمقابل، أظهرت محفزات 5 wt% Pd/Al₂O₃ و1 wt% Pd/Al₂O₃ معدلات تفاعل أبطأ، حيث حقق الأول تحويلًا كاملًا عند 120 دقيقة وتوزيع منتج قدره حوالي 60% كحول البنزيل و40% تولوين. حافظ محفز 1 wt% Pd/Al₂O₃ على 100% انتقائية لكحول البنزيل طوال التفاعل. كانت ترددات الدوران (TOFs) أعلى بكثير لمحفز 5 wt% Pd/C (115 دقيقة⁻¹) مقارنة بالمحفزات المدعومة بالألومينا (حوالي 21.7 دقيقة⁻¹)، مما يشير إلى تأثير دعم ملحوظ على النشاط التحفيزي. بشكل عام، تشير الدراسة إلى أنه بينما يتم ملاحظة نفس الكيمياء عبر المحفزات، فإن المحفز المدعوم بالكربون يظهر نشاطًا معززًا ربما بسبب تفاعلات معدنية-دعم مميزة تؤثر على شكل بلورات Pd. هناك حاجة لمزيد من التحقيقات لاستكشاف هذه التفاعلات وآثارها على الانتقائية في تفاعلات الهدرجة.
مناقشة
في هذه الدراسة، تم التحقيق في هدرجة البانزالديهيد عبر مختلف محفزات البالاديوم (Pd)، مع التركيز على آليات التفاعل وطاقات التنشيط المرتبطة بعمليات الهدرجة والهيدروجينوليسيس. تم تصميم تجارب الضغط العادي لإبطاء تحويل البانزالديهيد، مما يسمح بفحص مفصل للطبيعة المتسلسلة للتفاعلات. استخدمت الأجهزة دورق دائري ثلاثي العنق بسعة 100 مل، مع إدخال الهيدروجين لتعزيز الذوبان وتسهيل التفاعل. تم اختيار المحفز، وهو 5 wt% Pd/Al₂O₃، لمزيد من التحليل بسبب أدائه الجيد، حيث أسفر عن طاقات تنشيط قدرها 21.5 ± 0.19 كيلوجول مول⁻¹ للهدرجة و47.1 ± 0.05 كيلوجول مول⁻¹ للهيدروجينوليسيس، مما يشير إلى السيطرة الحركية لكلا التفاعلين.
تشير النتائج إلى أن هدرجة البانزالديهيد تحدث قبل هيدروجينوليسيس كحول البنزيل، حيث لا يبدأ الأخير حتى يتم استهلاك الأول بالكامل. تم دعم مسار التفاعل المتسلسل من خلال دراسات الامتصاص المشترك، التي أظهرت امتصاصًا تنافسيًا بين البانزالديهيد وكحول البنزيل على سطح المحفز. بينما تشير النتائج إلى آلية موقع واحد للتفاعلات، تشير أدلة على وجود مسار تعطيل انتقائي للتفاعل إلى أن مزيدًا من التحقيق ضروري لفهم سلوك المحفز والديناميات الأساسية للتفاعل بشكل كامل. بشكل عام، تسهم الدراسة في تقديم رؤى قيمة حول العمليات التحفيزية ذات الصلة بتخليق المواد الكيميائية الدقيقة وتحويل الكتلة الحيوية.
DOI: https://doi.org/10.1098/rsta.2025.0093
PMID: https://pubmed.ncbi.nlm.nih.gov/41988881
Publication Date: 2026-04-16
Author(s): Asma Nadia et al.
Primary Topic: Nanomaterials for catalytic reactions
Overview
The research investigates the selective hydrogenation of benzaldehyde to benzyl alcohol using three supported palladium (Pd) catalysts: 5 wt% Pd/C, 5 wt% Pd/Al₂O₃, and 1 wt% Pd/Al₂O₃, under both elevated and ambient hydrogen pressures at 313 K. The results reveal that the catalysts exhibit distinct reaction profiles, with the 1 wt% Pd/Al₂O₃ catalyst achieving nearly 100% selectivity for benzyl alcohol, while the 5 wt% Pd/C catalyst shows complete selectivity for the undesired by-product toluene. The differences in product selectivity correlate with the number of Pd surface atoms, where the smaller number on the 1 wt% Pd/Al₂O₃ catalyst kinetically hinders hydrogenolysis for up to 300 minutes.
The study also highlights a significant disparity in turnover frequencies (TOFs), with the Pd/C catalyst exhibiting a fivefold higher TOF (115 min⁻¹) compared to the alumina-supported catalysts (22.4 ± 1 min⁻¹), attributed to differences in Pd crystallite morphology. Activation energies for the hydrogenation and hydrogenolysis reactions over the 5 wt% Pd/Al₂O₃ catalyst are determined to be 21.5 kJ mol⁻¹ and 47.1 kJ mol⁻¹, respectively. Furthermore, the hydrogenolysis step is shown to commence only after complete conversion of benzaldehyde, and competitive adsorption dynamics between benzaldehyde and benzyl alcohol are established. The findings suggest that while the reaction can be approximated by a single-site model, further investigation is needed to explore the evidence of a reaction-selective deactivation pathway.
Introduction
The introduction of the research paper discusses the industrial significance of the heterogeneously catalyzed liquid-phase hydrogenation of benzaldehyde to produce benzyl alcohol, a key intermediate in the synthesis of various commercial products. The authors highlight the challenges in achieving high selectivity for benzyl alcohol due to competing reactions, particularly hydrogenolysis, which can lead to the formation of toluene. Factors such as catalyst composition, support material, solvent choice, and reaction conditions significantly influence product distribution. Previous studies indicate that nickel, platinum, and palladium-based catalysts exhibit varying activity levels, with Ni/SiO₂ showing higher activity due to favorable metal-support interactions.
The paper further explores the impact of solvent dielectric constants on reaction rates and notes that polar solvents can complicate the reaction by facilitating solvolysis. Notably, the authors reference findings that sulfur poisoning can enhance the selectivity of Pd/C catalysts for benzyl alcohol, shifting product distribution favorably. The research aims to utilize benzaldehyde hydrogenation as a model system to better understand sequential hydrogenation and hydrogenolysis events, proposing a detailed examination of supported Pd catalysts under different conditions. The study intends to elucidate how catalyst specifications and operational parameters can be optimized to improve benzyl alcohol selectivity, with distinct reaction profiles observed across different catalyst grades.
Methods
In this study, hydrogenation reactions were performed in a 500 ml stirred autoclave under elevated pressure conditions. The experimental setup involved the use of 100 mg of catalyst and 300 ml of methanol, which was purged with nitrogen to create an inert atmosphere. The catalyst was reduced by heating and stirring the mixture at 300 rpm under a continuous flow of hydrogen for 30 minutes. Following this, a solution of approximately 18 mmol of benzaldehyde or benzyl alcohol in 50 ml of methanol was degassed and introduced into the reactor, which was then sealed and pressurized to 4 barg. The reaction was agitated at 900 rpm, and hydrogen uptake was monitored using an automated gas flow controller.
The reactions were conducted without any auxiliary reagents, and all experiments were replicated to ensure reliability. Liquid samples were collected periodically, filtered to remove residual catalyst, and analyzed offline using gas-liquid chromatography (GLC) with a flame ionization detector. Calibration of the GLC was performed on known concentration solutions, yielding a standard error of less than ± 5%. Three different catalysts were tested: a primary 5 wt% Pd/C catalyst, along with 5 wt% Pd/Al₂O₃ and 1 wt% Pd/Al₂O₃, to assess the impact of support and metal loading on the hydrogenation process.
Results
The results section of the study presents a comprehensive characterization of various palladium (Pd) catalysts, including 5 wt% Pd/C, 5 wt% Pd/Al₂O₃, and 1 wt% Pd/Al₂O₃, using techniques such as ICP-OES, BET, CO chemisorption, TEM, powder XRD, and Raman spectroscopy. The palladium loadings were found to be 4.98 ± 0.05% for 5 wt% Pd/C, 4.97 ± 0.28% for 5 wt% Pd/Al₂O₃, and 0.74 ± 0.03% for 1 wt% Pd/Al₂O₃. The specific surface areas were measured as 533 ± 40.03, 188 ± 8.9, and 336 ± 34.3 m²/g, respectively. The XRD patterns indicated distinct crystalline phases of Pd and alumina, with the 5 wt% Pd/Al₂O₃ exhibiting a mixed phase of γ-Al₂O₃ and θ-Al₂O₃. CO chemisorption revealed a saturation coverage of 113 ± 3 µmol CO/g (cat) for 5 wt% Pd/C, leading to a calculated mean Pd particle size of 2.31 ± 0.06 nm, while the other catalysts showed larger particle sizes.
In terms of catalytic performance, the hydrogenation of benzaldehyde was evaluated across the different catalysts. The 5 wt% Pd/C catalyst demonstrated rapid conversion, achieving over 99% conversion within approximately 10 minutes, with benzyl alcohol as an intermediate and toluene as the primary product. In contrast, the 5 wt% Pd/Al₂O₃ and 1 wt% Pd/Al₂O₃ catalysts exhibited slower reaction rates, with the former achieving complete conversion at 120 minutes and a product distribution of approximately 60% benzyl alcohol and 40% toluene. The 1 wt% Pd/Al₂O₃ catalyst maintained 100% selectivity to benzyl alcohol throughout the reaction. The turnover frequencies (TOFs) were significantly higher for the 5 wt% Pd/C catalyst (115 min⁻¹) compared to the alumina-supported catalysts (approximately 21.7 min⁻¹), suggesting a notable support effect on catalytic activity. Overall, the study indicates that while the same chemistry is observed across the catalysts, the carbon-supported catalyst exhibits enhanced activity potentially due to distinct metal-support interactions that influence Pd crystallite morphology. Further investigations are warranted to explore these interactions and their implications for selectivity in hydrogenation reactions.
Discussion
In this study, the hydrogenation of benzaldehyde over various palladium (Pd) catalysts was investigated, focusing on the reaction mechanisms and activation energies associated with both hydrogenation and hydrogenolysis processes. Ambient pressure experiments were designed to slow the conversion of benzaldehyde, allowing for a detailed examination of the sequential nature of the reactions. The apparatus utilized a 100 ml 3-necked round-bottom flask, with hydrogen introduced to enhance solvation and facilitate the reaction. The catalyst, specifically 5 wt% Pd/Al₂O₃, was selected for further analysis due to its favorable performance, yielding activation energies of 21.5 ± 0.19 kJ mol⁻¹ for hydrogenation and 47.1 ± 0.05 kJ mol⁻¹ for hydrogenolysis, indicating kinetic control for both reactions.
The findings suggest that the hydrogenation of benzaldehyde occurs prior to the hydrogenolysis of benzyl alcohol, with the latter not commencing until the former is fully consumed. This sequential reaction pathway was supported by co-adsorption studies, which demonstrated competitive adsorption between benzaldehyde and benzyl alcohol on the catalyst surface. While the results imply a single-site mechanism for the reactions, evidence of a reaction-selective deactivation pathway indicates that further investigation is necessary to fully understand the catalyst behavior and the underlying reaction dynamics. Overall, the study contributes valuable insights into the catalytic processes relevant to fine chemical synthesis and biomass valorization.
