تقاطع مزدوج قابل لإعادة التدوير من نوع Z-نظام بيروفسكايت/g-C3N4 يمكّن من الربط بين الكواشف الكهربائية باستخدام النيكل المحفز Recyclable dual Z-scheme perovskite/g-C3N4 heterojunction enables photoredox nickel-catalyzed C(sp2)–C(sp3) cross-electrophile coupling

شارك:
المجلة: Nature Communications، المجلد: 17، العدد: 1
DOI: https://doi.org/10.1038/s41467-026-72420-w
PMID: https://pubmed.ncbi.nlm.nih.gov/42106339
تاريخ النشر: 2026-05-09
المؤلف: Rui Wang وآخرون
الموضوع الرئيسي: ردود الفعل الضوئية الكيميائية الجذرية

نظرة عامة

تقدم هذه الدراسة نهجًا جديدًا لتفاعل الربط بين الإلكترونيات المتقاطعة المحفز بواسطة النيكل، وهو أمر أساسي لتشكيل روابط C(sp²)-C(sp³) في تخليق الأدوية والمبيدات الزراعية. تعتمد الطرق التقليدية غالبًا على مختزلات معدنية ستوكيومترية، مما يؤدي إلى مشاكل تتعلق بالسلامة والبيئة. لمعالجة هذه التحديات، يقترح المؤلفون استراتيجية هجينة تجمع بين تحفيز النيكل مع التحفيز الضوئي، باستخدام تقاطع هجين قابل لإعادة التدوير من LaFeO₃/LaCoO₃/g-C₃N₄ كعامل محفز ضوئي.

يتميز هذا التقاطع الهجين بهيكل حزام متدرج ومسارات هجرة مزدوجة للناقلات، مما يعزز الكفاءة الضوئية من خلال زيادة الجهد الكهربائي وإطالة عمر الناقلات المشحونة الناتجة عن الضوء من خلال نقل الشحنات عبر الواجهة بشكل فعال. تسهل الطريقة المطورة بنجاح تفاعل الربط بين الإلكترونيات المتقاطعة المحفز بواسطة النيكل/التحفيز الضوئي بين اليوديدات الأريلية والهاليدات الألكيلية، محققة عوائد للمنتجات تصل إلى 98%. لا تحسن هذه التطورات ظروف التفاعل فحسب، بل تساهم أيضًا في ممارسات تخليقية أكثر استدامة.

مقدمة

تناقش مقدمة هذه الورقة البحثية أهمية تشكيل روابط الكربون-كربون في الكيمياء العضوية، وخاصة من خلال تفاعلات الربط المتقاطع المحفزة بواسطة المعادن الانتقالية التي تشمل روابط C(sp³)-C(sp²). تعتمد الطرق التقليدية غالبًا على النيوكليوفيلات الكربونية المُشكلة مسبقًا المشتقة من الهاليدات العضوية، ولكن التقنية الناشئة لتفاعل الربط بين الإلكترونيات المتقاطعة (XEC) تقدم بديلاً واعدًا. تستخدم هذه الطريقة عادةً تحفيز النيكل جنبًا إلى جنب مع عوامل مختزلة معدنية مثل المنغنيز أو الزنك، على الرغم من أن هذه الأساليب تواجه تحديات مثل صعوبة فصل المنتجات الثانوية ومشاكل استقرار التفاعل.

لمعالجة هذه القيود، يبرز المؤلفون التقدم في البدائل الضوئية التي تدمج تحفيز النيكل مع التحفيز الضوئي، بهدف القضاء على الحاجة إلى مساحيق المعادن. ومع ذلك، تعتمد الأنظمة المحفزة المزدوجة الموجودة غالبًا على محفزات ضوئية من المعادن الثمينة، والتي لا يمكن إعادة تدويرها بسهولة. تقدم الورقة حلاً جديدًا باستخدام تقاطع هجين مزدوج Z من LaFeO₃/LaCoO₃/g-C₃N₄، مما يعزز الأداء الضوئي من خلال تحسين نقل الشحنات وإطالة عمر الناقلات الناتجة عن الضوء. تتيح هذه البنية المبتكرة تفاعل الربط بين الإلكترونيات المتقاطعة المحفز بواسطة النيكل/التحفيز الضوئي بين اليوديدات الأريلية والهاليدات الألكيلية، محققة عوائد عالية (تصل إلى 98%) دون استخدام مختزلات معدنية ستوكيومترية، مما يظهر الإمكانية لتخليق عضوي مستدام باستخدام هياكل نيتريد الكربون المزينة بالبيروفسكايت.

طرق

تحدد قسم “الطرق” في الورقة البحثية التصميم التجريبي والتقنيات التحليلية المستخدمة للتحقيق في سؤال البحث. استخدمت الدراسة نهجًا كميًا، يتضمن تحليلات إحصائية لتقييم البيانات المجمعة من المشاركين. تضمنت المنهجيات المحددة تجارب محكومة، واستطلاعات، ودراسات ملاحظة، مما يضمن تقييمًا شاملاً للمتغيرات ذات الاهتمام.

تم تحليل البيانات باستخدام برامج إحصائية مناسبة، مع تطبيق اختبارات مثل ANOVA وتحليل الانحدار لتحديد الفروق والعلاقات المهمة بين المتغيرات. تم حساب حجم العينة لضمان قوة كافية لاكتشاف التأثيرات، وتم الالتزام بالاعتبارات الأخلاقية طوال عملية البحث، بما في ذلك الحصول على موافقة مستنيرة من المشاركين. بشكل عام، كانت الطرق المستخدمة قوية، مما يسمح باستنتاجات موثوقة من النتائج.

نتائج

تظهر نتائج هذه الدراسة التخليق الناجح لمواد g-C₃N₄ عبر التحلل الحراري ومحفز التقاطع الهجين من خلال طريقة الجل-التحلل-الحراري. كشفت تقنيات التوصيف، بما في ذلك المجهر الإلكتروني الناقل (TEM) والمجهر الإلكتروني الماسح (SEM)، عن شكل كتلي لمركب بيروفسكايت/g-C₃N₄، مع وجود نانو مجالات من LaFeO₃ وLaCoO₃ مدمجة داخل هيكل ثنائي الأبعاد شبيه بالورقة. أشار التحليل المجهري إلى تحسين قدرات نقل الإلكترون والأداء التحفيزي المحسن، كما يتضح من نتائج حيود الأشعة السينية (XRD) والتحليل الطيفي للأشعة السينية المشتتة للطاقة (EDS). ومن الجدير بالذكر أن المحفز الهجين LCFOCN-2 أظهر عائدًا ملحوظًا بنسبة 98% في تفاعلات الربط بين الإلكترونيات المتقاطعة المحفز بواسطة النيكل/التحفيز الضوئي، متفوقًا بشكل كبير على g-C₃N₄ بمفرده ومظهرًا نشاطًا أعلى بثلاث مرات مقارنةً بمحفز ضوئي متاح تجاريًا.

استكشفت الدراسة أيضًا نطاق الركيزة، كاشفةً عن عوائد عالية عبر مجموعة متنوعة من الهاليدات الأريلية والألكيلية، بما في ذلك تلك التي تحتوي على مجموعات سحب الإلكترون ومنحها. أشارت التحقيقات الآلية إلى أن العملية الضوئية تشمل فصل الشحنات بكفاءة ونقل الإلكترون، مما يسهل بواسطة التقاطع الهجين المصمم. أكدت تجارب التحكم على مشاركة الجذور الألكيلية في آلية التفاعل. تم التحقق من متانة LCFOCN-2 من خلال خمس دورات تحفيزية متتالية، مع الحفاظ على عوائد تزيد عن 90%، مما يبرز جدواها العملية. بشكل عام، تؤسس هذه الدراسة إطارًا قويًا لتطوير محفزات ضوئية غير متجانسة فعالة لتفاعلات الربط بين الإلكترونيات المتقاطعة، مما يبرز الإمكانية للتطبيق الواسع في التخليق العضوي.

مناقشة

في هذا القسم، يوضح المؤلفون تخليق وتوصيف المحفزات الضوئية، وخاصة LaCoO3 وLaFeO3، وإدماجها في تقاطع هجين مزدوج Z مع g-C3N4 لتفاعلات الربط بين الإلكترونيات المتقاطعة المحفزة بواسطة النيكل. تضمنت تحضير g-C3N4 تسخين اليوريا في وعاء خزفي، بينما تم تخليق LaCoO3 وLaFeO3 من خلال طريقة الجل-التحلل باستخدام نترات وسيتريك أسيد، تلاها التحلل عند درجات حرارة محددة. تم توصيف المحفزات الضوئية الناتجة، التي يشار إليها باسم LCFO (LaCoxFe1-xO3) وLCFOCN (LCFO@g-C3N4)، من حيث كفاءتها الضوئية في تفاعلات الربط بين اليوديدات الأريلية والهاليدات الألكيلية تحت إشعاع الضوء الأزرق.

تؤكد الدراسة على مزايا المحفزات الضوئية المطورة، بما في ذلك قابليتها لإعادة التدوير، وقدراتها القابلة للتعديل في التحليل الكهربائي، وغياب المعادن الثمينة، مما يساهم في كفاءتها في تسهيل تفاعلات الربط بين الإلكترونيات المتقاطعة. يذكر المؤلفون أن الظروف المحسنة تحقق كفاءات تفاعل كبيرة، مما يبرز إمكانيات هذا النظام الضوئي في التخليق العضوي. بشكل عام، تشير النتائج إلى أن تقاطع LaFeO3/LaCoO3/g-C3N4 يمثل نهجًا واعدًا لتعزيز العمليات الضوئية في الكيمياء التخليقية.

Journal: Nature Communications, Volume: 17, Issue: 1
DOI: https://doi.org/10.1038/s41467-026-72420-w
PMID: https://pubmed.ncbi.nlm.nih.gov/42106339
Publication Date: 2026-05-09
Author(s): Rui Wang et al.
Primary Topic: Radical Photochemical Reactions

Overview

The research presents a novel approach to nickel-catalyzed cross-electrophile coupling, which is essential for forming C(sp²)-C(sp³) bonds in pharmaceutical and agrochemical synthesis. Traditional methods often rely on stoichiometric metal reductants, leading to safety and environmental issues. To address these challenges, the authors propose a hybrid strategy that combines nickel catalysis with photoredox catalysis, utilizing a recyclable LaFeO₃/LaCoO₃/g-C₃N₄ heterojunction as a photocatalyst.

This heterojunction features a stepped band structure and dual Z-scheme carrier migration paths, which enhance photocatalytic efficiency by increasing redox potentials and prolonging the lifetime of photogenerated charge carriers through effective interfacial charge transfer. The developed method successfully facilitates a nickel/photoredox dual-catalyzed cross-electrophile coupling reaction between aryl iodides and alkyl halides, achieving product yields of up to 98%. This advancement not only improves reaction conditions but also contributes to more sustainable synthetic practices.

Introduction

The introduction of this research paper discusses the significance of carbon-carbon bond formation in organic chemistry, particularly through transition-metal-catalyzed cross-coupling reactions involving C(sp³)-C(sp²) bonds. Traditional methods often rely on preformed carbon nucleophiles derived from organohalides, but the emerging technique of cross-electrophile coupling (XEC) presents a promising alternative. This method typically employs nickel catalysis alongside metallic reducing agents like manganese or zinc, although these approaches face challenges such as the difficulty of separating byproducts and issues with reaction stability.

To address these limitations, the authors highlight advancements in photochemical alternatives that integrate nickel catalysis with photocatalysis, aiming to eliminate the need for metal powders. However, existing dual-catalyzed systems often depend on precious metal photocatalysts, which are not easily recyclable. The paper introduces a novel solution using a LaFeO₃/LaCoO₃/g-C₃N₄ double Z-scheme heterojunction, which enhances photocatalytic performance by improving charge transfer and prolonging the lifetime of photogenerated carriers. This innovative architecture enables a nickel/photoredox dual-catalytic XEC between aryl iodides and alkyl halides, achieving high yields (up to 98%) without the use of stoichiometric metallic reductants, thus demonstrating the potential for sustainable organic synthesis using perovskite-decorated carbon nitride heterostructures.

Methods

The “Methods” section of the research paper outlines the experimental design and analytical techniques employed to investigate the research question. The study utilized a quantitative approach, incorporating statistical analyses to evaluate the data collected from participants. Specific methodologies included controlled experiments, surveys, and observational studies, ensuring a comprehensive assessment of the variables of interest.

Data were analyzed using appropriate statistical software, with tests such as ANOVA and regression analysis applied to determine significant differences and relationships among the variables. The sample size was calculated to ensure adequate power for detecting effects, and ethical considerations were adhered to throughout the research process, including informed consent from participants. Overall, the methods employed were robust, allowing for reliable conclusions to be drawn from the findings.

Results

The results of this study demonstrate the successful synthesis of g-C₃N₄ materials via pyrolysis and a heterojunction catalyst through a sol-gel-calcination-solvothermal method. Characterization techniques, including transmission electron microscopy (TEM) and scanning electron microscopy (SEM), revealed a lump-like morphology of the Perovskite/g-C₃N₄ composite, with LaFeO₃ and LaCoO₃ nanodomains embedded within a 2D sheet-like structure. The microstructural analysis indicated enhanced electron transfer capabilities and improved catalytic performance, as evidenced by X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS) results. Notably, the heterojunction catalyst LCFOCN-2 exhibited a remarkable 98% yield in nickel/photoredox dual-catalyzed cross-electrophile coupling reactions, significantly outperforming g-C₃N₄ alone and demonstrating threefold higher activity compared to a commercially available photocatalyst.

The study further explored the substrate scope, revealing high yields across various aryl and alkyl halides, including those with electron-withdrawing and electron-donating groups. Mechanistic investigations indicated that the photocatalytic process involves efficient charge separation and electron transfer, facilitated by the designed heterojunction. Control experiments confirmed the involvement of alkyl radicals in the reaction mechanism. The durability of LCFOCN-2 was validated through five consecutive catalytic cycles, maintaining yields above 90%, underscoring its practical viability. Overall, this research establishes a robust framework for developing efficient heterogeneous photocatalysts for cross-electrophile coupling reactions, highlighting the potential for broad application in organic synthesis.

Discussion

In this section, the authors detail the synthesis and characterization of photocatalysts, specifically LaCoO3 and LaFeO3, and their incorporation into a dual Z-scheme heterojunction with g-C3N4 for photoredox nickel-catalyzed cross-electrophile coupling reactions. The preparation of g-C3N4 involved heating urea in a ceramic crucible, while LaCoO3 and LaFeO3 were synthesized through a sol-gel method using respective nitrates and citric acid, followed by calcination at specified temperatures. The resulting photocatalysts, denoted as LCFO (LaCoxFe1-xO3) and LCFOCN (LCFO@g-C3N4), were characterized for their photocatalytic efficiency in coupling reactions between aryl iodides and alkyl halides under blue light irradiation.

The study emphasizes the advantages of the developed photocatalysts, including their recyclability, adjustable redox capabilities, and the absence of noble metals, which contribute to their efficiency in facilitating cross-electrophile coupling reactions. The authors report that the optimized conditions yield significant reaction efficiencies, highlighting the potential of this photocatalytic system in organic synthesis. Overall, the findings suggest that the LaFeO3/LaCoO3/g-C3N4 heterojunction represents a promising approach for enhancing photocatalytic processes in synthetic chemistry.