DOI: https://doi.org/10.62476/nmca.101223
تاريخ النشر: 2026-04-03
الموضوع الرئيسي: العمليات المعدنية وسبائك المعادن
نظرة عامة
دراسة نظام PbSe-MnSe تضمنت تخليق سبائك عبر نطاق تركيز واسع واستخدام التحليل الحراري التفاضلي (DTA) ، حيود الأشعة السينية (XRD) ، تحليل الميكروهيكل (MSA) ، بالإضافة إلى قياسات الكثافة والصلابة الدقيقة. تم بناء مخطط طور T-x ، مما يكشف أن نظام PbSe-MnSe يعمل كقسم شبه ثنائي من النظام الثلاثي Pb-Mn-Se. من الجدير بالذكر أنه تم تحديد مركب PbMnSe$_2$ ، الذي يتشكل في نسبة مكونات 1:1 وينصهر بشكل متطابق عند 1150 درجة مئوية. أكدت تحليلات XRD أن PbMnSe$_2$ يتبلور في هيكل رباعي الزوايا مع معلمات الشبكة $a = 13.97$ Å و $c = 8.20$ Å ، وكثافات $\rho_{\text{pycn}} = 5.62$ جرام/سم³ و $\rho_{\text{X-ray}} = 5.66$ جرام/سم³.
عند درجة حرارة الغرفة ، يمكن أن تحتوي المحاليل الصلبة المستندة إلى PbSe على ما يصل إلى 5 مول.% MnSe ، بينما يمكن أن تشمل تلك المستندة إلى MnSe حوالي 2.5 مول.% PbSe. تنتهي التبلور المشترك لـ PbSe و PbMnSe$_2$ عند نقطة eutectic مع 25 مول.% MnSe عند 850 درجة مئوية ، بينما يتشكل eutectic آخر بين PbMnSe$_2$ و γ-MnSe عند 60 مول.% MnSe عند 960 درجة مئوية. بشكل عام ، توفر هذه الدراسة رؤى مهمة حول سلوك الطور وخصائص البلورات لنظام PbSe-MnSe.
مقدمة
تؤكد مقدمة هذه الورقة البحثية على ضرورة فهم توازن الأطوار في أنظمة الكالكوجينيد الرصاص لتطوير مواد شبه موصلة متعددة المكونات ذات خصائص مصممة. تسلط الضوء على أهمية الكالكوجينيدات الرصاصية ، وخاصة سيلينيد الرصاص (PbSe) ، وهو شبه موصل بفجوة طاقة تبلغ 0.27 إلكترون فولت ويستخدم في كاشفات الأشعة تحت الحمراء لمجموعة متنوعة من التطبيقات ، بما في ذلك التصوير الحراري والأنظمة العسكرية. كما تشير الورقة إلى دور الكالكوجينيدات المنغنيزية في إنشاء المواد المغناطيسية وإمكاناتها كمضافات في تطبيقات أشباه الموصلات.
يهدف المؤلفون إلى دراسة التفاعلات الكيميائية بين PbSe وسيلينيد المنغنيز (MnSe) باستخدام طرق فيزيائية كيميائية متنوعة ، بما في ذلك التحليل الحراري التفاضلي (DTA) ، حيود الأشعة السينية ، والميكروتحليل. يعتزمون بناء مخطط طور لنظام PbSe-MnSe ، وتحديد مراحل جديدة ، واستكشاف مناطق المحلول الصلب. تم الإبلاغ عن نقطة انصهار PbSe لتكون 1080 درجة مئوية ، حيث يتبلور في هيكل شبكي مكعب ، بينما يظهر MnSe هياكل بلورية مختلفة اعتمادًا على طوره. يتم وضع هذه الدراسة كأهمية علمية وعملية لتطوير مواد وظيفية جديدة من خلال تفاعل هذه المركبات.
طرق
في هذا القسم ، يتم تفصيل طرق التخليق لمركبات PbSe و MnSe ، باستخدام عناصر عالية النقاء: 99.98% رصاص ، 99.998% سيلينيوم ، و 99.997% منغنيز كهربائي. نظرًا لتفاعل المنغنيز مع زجاج الكوارتز ، تم جرافيتة السطح الداخلي للأمبولة الكوارتزية لتسهيل التخليق. تم تخليق مركب MnSe عن طريق خلط المنغنيز المسحوق ناعمًا مع الماء وحمض النيتريك ، تلاه وزن ستوكيو متري للمنغنيز والسيلينيوم ، وإغلاق الخليط في أمبولة كوارتزية ، وتعريضه لعملية حرارية محكومة تشمل درجات حرارة تصل إلى 1200 درجة مئوية على مدى عدة أيام. تم ضغط المسحوق غير المتجانس الناتج إلى أقراص وخضع لمزيد من المعالجة الحرارية عند 800 درجة مئوية لمدة 240 ساعة.
تم إجراء تخليق لاحق للسبائك من PbSe و MnSe باستخدام طريقة الأمبولة عند درجات حرارة تتراوح بين 1100-1200 درجة مئوية ، مع معالجة حرارية عند 600 درجة مئوية لمدة 240 ساعة لتحقيق التوازن. تم إجراء تحليلات فيزيائية كيميائية متنوعة ، بما في ذلك التحليل الحراري التفاضلي (DTA) بهامش خطأ ±5 درجات مئوية ، وتحليل الفلورية بالأشعة السينية ، ودراسات الميكروهيكل باستخدام ميكروسكوب معدني مع محلول حفر محدد. تم إجراء قياسات الصلابة الدقيقة باستخدام جهاز اختبار PMT-3 ، مع منهجية مفصلة لحساب قيم الصلابة الدقيقة والأخطاء المرتبطة بها. مكنت مجموعة تحديد الصلابة الدقيقة والتحليل الفيزيائي الكيميائي من توصيف دقيق للأنظمة متعددة الأطوار ورؤى حول تشكيل الأطوار وتفاعلات المكونات. تم قياس كثافة السبائك باستخدام جهاز قياس الكثافة مع التولوين كسائل عمل.
النتائج
تشير نتائج الدراسة حول نظام سبائك PbSe-MnSe إلى أن جميع السبائك تظهر مقاومة للعوامل البيئية ، مع حدوث الذوبان فقط في الأحماض والقلويات القوية. كشفت التحليلات الحرارية عن تأثيرات ماصة حرارية تتراوح بين اثنين إلى ثلاثة في الرسوم الحرارية ، مما يؤكد وجود سبائك ثنائية الطور. أظهر التحليل الميكروهيكلي مراحل المحلول الصلب المستندة إلى PbSe و MnSe ، مع تركيبات محددة أدت إلى تحديد المركب الجديد PbMnSe₂ ، خاصة في السبيكة التي تحتوي على 50 مول.% MnSe.
أكد تحليل حيود الأشعة السينية هذه النتائج ، موضحًا أن السبيكة التي تحتوي على 5 مول.% MnSe هي محلول صلب يعتمد على PbSe ، بينما أظهرت سبيكة 50 مول.% MnSe أنماط حيود مميزة تشير إلى مركب جديد. يكشف مخطط الطور الذي تم بناؤه من هذه التحليلات عن نظام eutectic شبه ثنائي يتميز بمركبات مستقرة ، بما في ذلك PbMnSe₂ ، الذي ينصهر بشكل متطابق عند 1150 درجة مئوية. كما حددت الدراسة مناطق المحلول الصلب وانتقالات الطور داخل النظام ، مع تسليط الضوء على سلوك التبلور عبر تركيزات مختلفة من MnSe. من الجدير بالذكر أن قيم الصلابة الدقيقة اختلفت بشكل كبير بين السبائك ، حيث أظهر مركب PbMnSe₂ أعلى صلابة دقيقة عند 1370 ميغاباسكال.
مناقشة
في هذه الدراسة ، تم التحقيق في نظام PbSe-MnSe من خلال التحليل الفيزيائي الكيميائي ، مما أدى إلى بناء مخطط الطور الخاص به (T-x). تكشف النتائج أن مخطط الطور يمثل قسمًا شبه ثنائي من النظام الثلاثي Pb-Mn-Se. عند درجة حرارة 1150 درجة مئوية ، يتشكل مركب متطابق ، PbMnSe\(_2\) ، في نسبة مكونات 1:1. يشير تحليل الطور بالأشعة السينية إلى أن PbMnSe\(_2\) يتبلور في هيكل رباعي الزوايا مع معلمات الشبكة \(a = 13.97\) Å و \(c = 8.20\) Å ، وكثافة تبلغ حوالي \(5.62 \, \text{g/cm}^3\).
عند درجة حرارة الغرفة ، يمكن أن تحتوي المحاليل الصلبة المستندة إلى PbSe على ما يصل إلى 5 مول.% MnSe ، بينما يمكن أن تستوعب تلك المستندة إلى MnSe حوالي 2.5 مول.% PbSe. تتوج عملية التبلور في eutectic مزدوج عند 850 درجة مئوية ، تتميز بـ 25 مول.% PbSe. بالإضافة إلى ذلك ، يتشكل eutectic آخر بين PbMnSe\(_2\) و γ-MnSe عند 960 درجة مئوية مع تركيبة تبلغ 60 مول.% MnSe. تسهم هذه النتائج في فهم أعمق للعلاقات الطورية وحدود المحلول الصلب داخل نظام PbSe-MnSe.
DOI: https://doi.org/10.62476/nmca.101223
Publication Date: 2026-04-03
Primary Topic: Metallurgical and Alloy Processes
Overview
The study of the PbSe-MnSe system involved synthesizing alloys across a broad concentration range and employing differential thermal analysis (DTA), X-ray diffraction (XRD), microstructural analysis (MSA), as well as density and microhardness measurements. A T-x phase diagram was constructed, revealing that the PbSe-MnSe system serves as a quasi-binary section of the ternary Pb-Mn-Se system. Notably, a compound, PbMnSe$_2$, was identified, which forms in a 1:1 component ratio and melts congruently at 1150°C. XRD analysis confirmed that PbMnSe$_2$ crystallizes in a tetragonal structure with lattice parameters $a = 13.97$ Å and $c = 8.20$ Å, and densities of $\rho_{\text{pycn}} = 5.62$ g/cm³ and $\rho_{\text{X-ray}} = 5.66$ g/cm³.
At room temperature, solid solutions based on PbSe can incorporate up to 5 mol.% MnSe, while those based on MnSe can include approximately 2.5 mol.% PbSe. The co-crystallization of PbSe and PbMnSe$_2$ concludes at a eutectic point with 25 mol.% MnSe at 850°C, while another eutectic forms between PbMnSe$_2$ and γ-MnSe at 60 mol.% MnSe at 960°C. Overall, this research provides significant insights into the phase behavior and crystallographic properties of the PbSe-MnSe system.
Introduction
The introduction of this research paper emphasizes the necessity of understanding phase equilibria in lead chalcogenide systems to develop new multicomponent semiconductor materials with tailored properties. It highlights the significance of lead chalcogenides, particularly lead selenide (PbSe), which is a semiconductor with a band gap of 0.27 eV and is utilized in infrared detectors for various applications, including thermal imaging and military systems. The paper also notes the role of manganese chalcogenides in creating magnetic materials and their potential as additives in semiconductor applications.
The authors aim to investigate the chemical interactions between PbSe and manganese selenide (MnSe) using various physicochemical methods, including differential thermal analysis (DTA), X-ray diffraction, and microanalysis. They intend to construct a phase diagram for the PbSe-MnSe system, identify new phases, and explore solid solution regions. The melting point of PbSe is reported to be 1080°C, crystallizing in a cubic lattice structure, while MnSe exhibits different crystal structures depending on its phase. This study is positioned as both scientifically and practically significant for the development of new functional materials through the interaction of these compounds.
Methods
In this section, the synthesis methods for PbSe and MnSe compounds are detailed, utilizing high-purity elements: 99.98% lead, 99.998% selenium, and 99.997% electrolytic manganese. Due to the reactivity of manganese with quartz glass, the inner surface of the quartz ampoule was graphitized to facilitate the synthesis. The MnSe compound was synthesized by mixing finely crushed manganese with water and nitric acid, followed by stoichiometric weighing of manganese and selenium, sealing the mixture in a quartz ampoule, and subjecting it to a controlled thermal process involving temperatures up to 1200°C over several days. The resulting heterogeneous powder was compressed into tablets and underwent further heat treatment at 800°C for 240 hours.
Subsequent synthesis of alloys from PbSe and MnSe was performed using the ampoule method at temperatures between 1100-1200°C, with heat treatment at 600°C for 240 hours to achieve equilibrium. Various physicochemical analyses were conducted, including Differential Thermal Analysis (DTA) with a ±5°C error margin, X-ray fluorescence analysis, and microstructural studies using a metallographic microscope with a specific etching solution. Microhardness measurements were carried out using a PMT-3 tester, with a detailed methodology for calculating microhardness values and associated errors. The combination of microhardness determination and physicochemical analysis enabled accurate characterization of multiphase systems and insights into phase formation and component interactions. The density of the alloys was measured using a pycnometer with toluene as the working fluid.
Results
The results of the study on the PbSe-MnSe alloy system indicate that all alloys exhibit resistance to environmental factors, with dissolution occurring only in strong acids and alkalis. Thermal analysis revealed two to three endothermic effects in the thermograms, confirming the presence of two-phase alloys. Microstructural analysis showed solid solution phases based on PbSe and MnSe, with specific compositions leading to the identification of the new compound PbMnSe₂, particularly in the alloy with 50 mol.% MnSe.
X-ray diffraction analysis corroborated these findings, demonstrating that the alloy with 5 mol.% MnSe is a solid solution based on PbSe, while the 50 mol.% MnSe alloy exhibited distinct diffraction patterns indicative of a new compound. The phase diagram constructed from these analyses reveals a quasi-binary eutectic system characterized by stable compounds, including PbMnSe₂, which melts congruently at 1150°C. The study also delineated the solid solution regions and phase transitions within the system, highlighting the crystallization behavior across varying concentrations of MnSe. Notably, the microhardness values varied significantly among the alloys, with the PbMnSe₂ compound exhibiting the highest microhardness at 1370 MPa.
Discussion
In this study, the PbSe-MnSe system was investigated through physicochemical analysis, leading to the construction of its temperature-composition (T-x) phase diagram. The findings reveal that the phase diagram represents a quasi-binary section of the ternary Pb-Mn-Se system. At a temperature of 1150°C, a congruent compound, PbMnSe\(_2\), is formed in a 1:1 component ratio. X-ray phase analysis indicates that PbMnSe\(_2\) crystallizes in a tetragonal structure with lattice parameters \(a = 13.97\) Å and \(c = 8.20\) Å, and a density of approximately \(5.62 \, \text{g/cm}^3\).
At room temperature, solid solutions based on PbSe can incorporate up to 5 mol.% MnSe, while those based on MnSe can accommodate about 2.5 mol.% PbSe. The crystallization process culminates in a double eutectic at 850°C, characterized by 25 mol.% PbSe. Additionally, another eutectic forms between PbMnSe\(_2\) and γ-MnSe at 960°C with a composition of 60 mol.% MnSe. These findings contribute to a deeper understanding of the phase relationships and solid solution limits within the PbSe-MnSe system.
