DOI: https://doi.org/10.18520/cs/v130/i2/126-135
تاريخ النشر: 2026-01-25
المؤلف: K. P. Singh وآخرون
الموضوع الرئيسي: فيزياء وهندسة المفاعلات النووية
نظرة عامة
التحليل المقدم في هذا القسم يقيم استخدام نظائر اليورانيوم في دورات الوقود النووي المختلفة، مع التركيز بشكل خاص على أداء المفاعلات المائية الثقيلة المضغوطة (PHWRs) بمستويات تخصيب مختلفة. ويخلص إلى أنه في دورة مفتوحة، يتم تحقيق أقصى استخدام لـ $^{235}\text{U}$ لكل طن من اليورانيوم المستخرج في دورة PHWR-SEU، بينما تظهر دورات PHWR-HALEU-Th وPHWR-NU استخدامًا مشابهًا لـ $^{235}\text{U}$. ومن الجدير بالذكر أن الثوريوم في دورة PHWR-HALEU-Th يعمل كماص، مما يؤثر سلبًا على إجمالي توليد الطاقة من $^{235}\text{U}$. في سياق دورة مغلقة، تعتبر دورة PHWR-NU متفوقة وتعتبر جزءًا أساسيًا من برنامج الهند الثلاثي المراحل لاستخدام الثوريوم.
تسلط الدراسة الضوء أيضًا على أن التصميم الفني الحالي للمفاعلات PHWRs متوافق فقط مع معدلات احتراق معتدلة يمكن تحقيقها باستخدام اليورانيوم الطبيعي أو اليورانيوم المخصب قليلاً (SEU)، وليس مناسبًا لمعدلات الاحتراق العالية التي تميز المفاعلات المائية المضغوطة (PWRs). تم تحديد إمكانية تمديد احتراق الوقود في PHWRs باستخدام SEU حتى مستوى تخصيب 1.1% كحد ممكن. بالإضافة إلى ذلك، لا يعتبر استخدام وقود HALEU-Th خيارًا قابلاً للتطبيق لتصاميم PHWR الحالية، حيث إن تعديل هذه المفاعلات لاستيعاب HALEU-Th سيعيق تقدم استراتيجية استخدام الثوريوم في الهند ويثير تساؤلات حول استدامة $^{233}\text{U}$ الناتج في هذه الدورة.
النتائج
يقدم قسم النتائج في الورقة تحليلًا متعمقًا لثلاث دورات وقود لمفاعلات المياه الثقيلة المضغوطة (PHWR): PHWR-NU وPHWR-HALEU-Th وPHWR-SEU، مع التركيز بشكل خاص على التكامل المحتمل للثوريوم مع اليورانيوم منخفض التخصيب عالي الجودة (HALEU) في PHWRs. تُبرز دورة PHWR-NU، التي تعمل حاليًا في عدة دول بما في ذلك الهند وكندا والأرجنتين وكوريا، كجزء من برنامج الهند الثلاثي المراحل لدورة الثوريوم المغلقة. تحقق هذه الدورة إنتاج طاقة يبلغ 7.0 GWd لكل طن من اليورانيوم المستخرج، مع حاجة مفاعل PHWR بقدرة 220 مWe تقريبًا إلى حوالي 40 طنًا من اليورانيوم الطبيعي سنويًا.
تشمل المزايا الرئيسية لدورة PHWR-NU بساطتها، حيث إنها لا تتطلب تخصيب اليورانيوم، والجودة العالية للبلوتونيوم المنتج عند احتراق التفريغ، مما يفيد برنامج المربين السريع. بالإضافة إلى ذلك، تُعرف الدورة بموثوقيتها التشغيلية وسلامتها. ومع ذلك، تشمل العيوب الملحوظة متطلبات تصنيع الوقود الكبيرة وحجم الوقود المستنفد الناتج، إلى جانب الطلبات التشغيلية الكبيرة على آلات التزويد أثناء عمليات التحميل والتفريغ.
المناقشة
يستعرض قسم المناقشة في الورقة البحثية دورة الوقود الحالية لمفاعلات المياه الثقيلة المضغوطة (PHWRs) في الهند، والتي تستخدم وقود اليورانيوم الطبيعي (NU) بمحتوى حوالي 0.7% من $^{235}$U. لا تتطلب هذه الدورة تخصيبًا وتستخدم المياه الثقيلة بكفاءة كوسيط ومبرد، محققة متوسط احتراق تفريغ يبلغ حوالي 7.0 GWd/t. ومع ذلك، يؤدي ذلك إلى كمية أكبر من الوقود المستنفد مقارنة بالمفاعلات المائية المضغوطة (PWRs). يتم التأكيد على أن دورة الوقود المغلقة هي جزء أساسي من البرنامج النووي الثلاثي المراحل للهند، حيث ينتج إعادة معالجة وقود NU المستنفد بلوتونيوم عالي الجودة لمفاعلات المربين السريع (FBRs)، مما يعزز تكاثر المواد الانشطارية والقدرة النووية.
يناقش القسم أيضًا تداعيات زيادة الاحتراق في PHWRs، مشيرًا إلى أن الوقود الذي يحتوي على محتوى انشطاري أعلى، مثل اليورانيوم المخصب قليلاً (SEU) أو الوقود القائم على الثوريوم، يمكن أن يعزز نظريًا احتراق التفريغ. ومع ذلك، تحد التحديات العملية في تصميم المفاعلات وتقييمات السلامة من مدى هذه التعديلات. على سبيل المثال، بينما يمكن أن يحقق SEU (حوالي 1.1% $^{235}$U) احتراق تفريغ يبلغ حوالي 20 GWd/t، فإن الانتقال إلى مستويات احتراق أعلى (مثل 50 GWd/t) يقدم عقبات تشغيلية وسلامة كبيرة. كما تسلط التحليل الضوء على إمكانيات دورات الثوريوم، التي يمكن أن تحقق مستويات احتراق تبلغ 40 GWd/t أو أكثر، ولكنها ستتطلب إدارة دقيقة لعوامل التفاعل وذروة الطاقة. بشكل عام، تؤكد الدراسة على الحاجة إلى نهج متوازن في تحسين دورات الوقود، مع الأخذ في الاعتبار كل من الجدوى الفنية وتداعيات السلامة للوقود عالي الاحتراق في تصاميم PHWR الحالية.
DOI: https://doi.org/10.18520/cs/v130/i2/126-135
Publication Date: 2026-01-25
Author(s): K. P. Singh et al.
Primary Topic: Nuclear reactor physics and engineering
Overview
The analysis presented in this section evaluates the utilization of uranium isotopes in various nuclear fuel cycles, particularly focusing on the performance of Pressurized Heavy Water Reactors (PHWRs) with different enrichment levels. It concludes that in an open cycle, the utilization of $^{235}\text{U}$ per tonne of mined uranium is maximized in the PHWR-SEU cycle, while the PHWR-HALEU-Th and PHWR-NU cycles exhibit comparable $^{235}\text{U}$ utilization. Notably, thorium in the PHWR-HALEU-Th cycle acts as an absorber, negatively affecting the overall energy generation from $^{235}\text{U}$. In a closed cycle context, the PHWR-NU cycle is deemed superior and is integral to India’s three-stage thorium utilization program.
The study further highlights that the current technical design of PHWRs is only compatible with moderate burnups achievable with natural uranium or slightly enriched uranium (SEU) fuels, and is not suited for the high burnups characteristic of Pressurized Water Reactors (PWRs). The potential extension of fuel burnup in PHWRs using SEU up to 1.1% enrichment is identified as the feasible limit. Additionally, the use of HALEU-Th fuel is not considered a viable option for existing PHWR designs, as modifying these reactors to accommodate HALEU-Th would hinder the progress of India’s thorium utilization strategy and the sustainability of $^{233}\text{U}$ generated in this cycle is questioned.
Results
The results section of the paper presents an in-depth analysis of three Pressurized Heavy Water Reactor (PHWR) fuel cycles: PHWR-NU, PHWR-HALEU-Th, and PHWR-SEU, with a particular focus on the potential integration of thorium with High-Assay Low-Enriched Uranium (HALEU) in PHWRs. The PHWR-NU cycle, currently operational in several countries including India, Canada, Argentina, and Korea, is highlighted as part of India’s three-stage closed-cycle thorium utilization program. This cycle achieves an energy output of 7.0 GWd per tonne of mined uranium, with a typical 220 MWe PHWR requiring approximately 40 tonnes of natural uranium annually.
Key advantages of the PHWR-NU cycle include its simplicity, as it does not require uranium enrichment, and the high-quality plutonium produced at discharge burnup, which is beneficial for the Fast Breeder Programme. Additionally, the cycle is recognized for its operational reliability and safety. However, notable disadvantages include the substantial fuel fabrication requirements and the high volume of spent fuel generated, alongside significant operational demands on fueling machinery during loading and unloading processes.
Discussion
The discussion section of the research paper outlines the current fuel cycle for Pressurized Heavy Water Reactors (PHWRs) in India, which utilizes natural uranium (NU) fuel with approximately 0.7% $^{235}$U content. This cycle does not require enrichment and efficiently uses heavy water as a moderator and coolant, achieving an average discharge burnup of about 7.0 GWd/t. However, this results in a higher quantity of spent fuel compared to Pressurized Water Reactors (PWRs). The closed fuel cycle is emphasized as integral to India’s three-stage nuclear program, where reprocessing discharged NU fuel generates high-quality plutonium for fast breeder reactors (FBRs), enhancing fissile material multiplication and nuclear capacity.
The section further discusses the implications of increasing burnup in PHWRs, suggesting that higher fissile content fuels, such as slightly enriched uranium (SEU) or thorium-based fuels, could theoretically enhance discharge burnup. However, practical challenges in reactor design and safety assessments limit the extent of these modifications. For instance, while SEU (approximately 1.1% $^{235}$U) could achieve a discharge burnup of around 20 GWd/t, transitioning to higher burnup levels (e.g., 50 GWd/t) presents significant operational and safety hurdles. The analysis also highlights the potential of thorium cycles, which could achieve burnup levels of 40 GWd/t or more, but would require careful management of reactivity and power peaking factors. Overall, the study underscores the need for a balanced approach in optimizing fuel cycles, considering both the technical feasibility and safety implications of high-burnup fuels in existing PHWR designs.
