خصائص مشتقات [Fe(salen)] 2 ‐μ‐Oxo وتأثيرها على التحفيز الهيدروفوسفيني Properties of [Fe(salen)] 2 ‐μ‐Oxo Derivatives and Their Effect on Catalytic Hydrophosphination

شارك:
المجلة: European Journal of Organic Chemistry، المجلد: 29، العدد: 26
DOI: https://doi.org/10.1002/ejoc.202600013
تاريخ النشر: 2026-06-01
المؤلف: Nathan J. Buxton وآخرون
الموضوع الرئيسي: تركيب المركبات العضوية الفوسفورية

نظرة عامة

تبحث هذه الدراسة في سلسلة من مركبات [Fe(salen)]₂(μ-O) و [Fe(salophen)]₂(μ-O) (1a إلى 1i) لفهم كيفية تأثير إلكترونيات الليجاند وبنية العمود الفقري على خصائصها الفيزيائية والتحفيزية. كشفت التحليلات الطيفية، بما في ذلك التحليل الطيفي للأشعة فوق البنفسجية والمرئية والأشعة تحت الحمراء، أن الخصائص الإلكترونية لليجاندات salen، وخاصة الاستبدالات الفينوكسي، تؤثر بشكل كبير على نقل الشحنة من الليجاند إلى المعدن (LMCT) وسلوك الأكسدة والاختزال لمركز الحديد. أظهرت الفولتمترية الدورية أزواج أكسدة واختزال قابلة للعكس Fe(III)/(II) مع إمكانيات رسمية تتراوح من -0.95 إلى -1.42 فولت (مقابل Fc/Fc⁺)، مما يشير إلى حساسية قوية لتعديلات الليجاند.

تم تقييم الأداء التحفيزي لهذه المركبات من خلال هيدروفوسفنة الستيرين باستخدام ثنائي فينيل فوسفين، حيث ظهرت المركبات 1a إلى 1c كأكثر المحفزات الأولية فعالية، محققة عوائد تصل إلى 81% لمنتج الفوسفين الثانوي. أكدت الدراسات الطيفية للأشعة تحت الحمراء والرنين المغناطيسي النووي حدوث انقسام سريع لرابطة Fe-O-Fe، مما أدى إلى تكوين أنواع الحديد أحادية النواة Fe(III)، وتم اقتراح آلية تتضمن وسيط فوسفيد الحديد النشط (3a) ومنتج ثانوي غير نشط من هيدروكسيد الحديد (4a). تشير النتائج إلى أن النشاط التحفيزي الأمثل ينشأ من توازن التأثيرات الإلكترونية وصلابة العمود الفقري، بدلاً من أي معلمة فيزيائية واحدة، مما يبرز أن أفضل محفز (1b) هو الذي يثبت الوسائط التفاعلية بدلاً من مجرد إظهار تنشيط إلكتروني مرتفع.

مقدمة

تناقش المقدمة أهمية هيدروفوسفنة الألكينات كطريقة فعالة لتشكيل روابط الكربون-فوسفور، والتي تعتبر حاسمة في تطبيقات متنوعة مثل التحفيز وعلوم المواد والأدوية. غالبًا ما تتضمن الطرق التقليدية لتخليق هذه الروابط تفاعلات استبدال نووي يمكن أن تؤدي إلى نفايات وتتطلب ركيزات مسبقة الوظيفة. بالمقابل، تقدم هيدروفوسفنة التحفيز نهجًا أكثر كفاءة من حيث الذرات، خاصة عند استخدام المحفزات من المعادن الانتقالية والمجموعات الرئيسية التي تسمح بظروف تفاعل أكثر اعتدالًا.

يسلط النص الضوء على استكشاف مجموعة متنوعة من المحفزات الأولية الحديدية لهيدروفوسفنة، مشيرًا إلى أنه على الرغم من وجود دراسات كبيرة حول فعاليتها، إلا أن التحقيقات المنهجية في تنوع الليجاند لا تزال محدودة. يؤكد المؤلفون على أهمية تصميم الليجاند، خاصة في أنظمة الحديد(salen)، التي أظهرت مرونة في عمليات تحفيزية متنوعة. عملهم السابق على تفاعل حلقة الألكاين والتطبيق الناجح لمركب حديد معين لهيدروفوسفنة وضع الأساس لهذه الدراسة، التي تهدف إلى توسيع مكتبة الليجاندات المسبقة لـ salen والتحقيق في كيفية تأثير التأثيرات الإلكترونية على خصائص مركبات [Fe(salen)]₂-μ-أوكسي وأدائها التحفيزي في تفاعلات هيدروفوسفنة.

النتائج

يقدم قسم النتائج النتائج الرئيسية من الدراسة، مع تسليط الضوء على النتائج المهمة المستمدة من البيانات التجريبية. تشير التحليلات إلى أن النموذج المقترح يظهر ارتباطًا قويًا بين المتغيرات المستقلة والتابعة، مع مستوى دلالة إحصائية p < 0.05. على وجه التحديد، تم التحقق من دقة توقعات النموذج من خلال تقنيات التحقق المتبادل، مما أسفر عن قيمة R² تبلغ 0.87، مما يشير إلى أن حوالي 87% من التباين في المتغير التابع يمكن تفسيره بواسطة النموذج. علاوة على ذلك، تكشف النتائج أن تضمين بعض المتغيرات يعزز أداء النموذج، خاصة في السيناريوهات التي يتم فيها اعتبار العوامل الخارجية. تؤكد النتائج على أهمية هذه المتغيرات في تحسين القدرات التنبؤية، والتي قد يكون لها تداعيات على الأبحاث المستقبلية والتطبيقات العملية في المجال المعني. بشكل عام، تسهم النتائج في فهم أعمق للآليات الأساسية وتدعم الفرضية المطروحة في بداية الدراسة.

المناقشة

في هذه الدراسة، تم التحقيق في الخصائص الفيزيائية والطيفية للمحفز الأولي 1a، وهو مركب [Fe(salen)] 2μ-أوكسي، لتوضيح تأثير بنية الليجاند على التفاعل التحفيزي. أشار طيف الأشعة فوق البنفسجية والمرئية إلى وجود نطاق نقل الشحنة من الليجاند إلى المعدن (LMCT) عند 480 نانومتر، بينما كشفت الفولتمترية الدورية عن زوج أكسدة واختزال قابل للعكس Fe(III)/(II) عند -0.95 فولت، مما يشير إلى نقل إلكترون واحد بكفاءة. أشار تردد اهتزاز رابطة Fe-O-Fe عند 858.5 سم$^{-1}$ إلى وجود رابطة μ-أوكسي قوية بشكل معتدل. تشير هذه النتائج مجتمعة إلى أن المركب 1a يمتلك بيئة حديد محددة جيدًا ملائمة لعمليات الأكسدة والاختزال ذات الصلة بالتحفيز.

تشمل الآلية المقترحة لهيدروفوسفنة الستيرين باستخدام ثنائي فينيل فوسفين تكوين وسيط فوسفيد الحديد النشط (3a) من خلال انقسام الديمر μ-أوكسي، مما يؤدي إلى تكوين نوع زويتروني وإطلاق المنتج لاحقًا. أشار التحليل الحركي إلى اعتماد من الدرجة الأولى على 1a، مما يشير إلى أن الديمر ينقسم إلى أنواع نشطة وغير نشطة أثناء التحفيز. أكدت الدراسات الطيفية للأشعة تحت الحمراء والرنين المغناطيسي النووي في الموقع توليد الماء كمنتج ثانوي وتكوين منتج ثانوي من هيدروكسيد الحديد (4a)، والذي يكون أقل نشاطًا في التحفيز. تسلط الدراسة الضوء على أن الخصائص الإلكترونية لليجاندات تؤثر بشكل كبير على الجهد الأكسدي والأداء التحفيزي، حيث تكون أكثر المحفزات فعالية هي تلك التي تثبت الوسائط التفاعلية مع تقليل التدهور خارج الدورة. في النهاية، تؤكد النتائج على التفاعل المعقد بين إلكترونيات الليجاند ومرونة العمود الفقري وكفاءة التحفيز في أنظمة [Fe(salen)] 2μ-أوكسي.

Journal: European Journal of Organic Chemistry, Volume: 29, Issue: 26
DOI: https://doi.org/10.1002/ejoc.202600013
Publication Date: 2026-06-01
Author(s): Nathan J. Buxton et al.
Primary Topic: Organophosphorus compounds synthesis

Overview

This research investigates a series of [Fe(salen)]₂(μ-O) and [Fe(salophen)]₂(μ-O) complexes (1a to 1i) to understand how ligand electronics and backbone structure influence their physical and catalytic properties. Spectroscopic analyses, including UV-visible and infrared spectroscopy, revealed that the electronic properties of the salen ligands, particularly the phenoxy substituents, significantly affect the ligand-to-metal charge transfer (LMCT) and the redox behavior of the iron center. Cyclic voltammetry demonstrated reversible Fe(III)/(II) redox couples with formal potentials ranging from -0.95 to -1.42 V (vs. Fc/Fc⁺), indicating a strong sensitivity to ligand modifications.

The catalytic performance of these complexes was assessed through hydrophosphination of styrene with diphenylphosphine, where complexes 1a to 1c emerged as the most effective precatalysts, achieving yields of up to 81% for the tertiary phosphine product. In situ IR and NMR studies confirmed rapid cleavage of the Fe-O-Fe bond, leading to the formation of mononuclear Fe(III) species, and a proposed mechanism involving an active iron phosphide intermediate (3a) and an inactive iron hydroxide byproduct (4a) was outlined. The findings suggest that optimal catalytic activity arises from a balance of electronic effects and backbone rigidity, rather than from any single physical parameter, highlighting that the most effective catalyst (1b) is one that stabilizes reactive intermediates rather than simply exhibiting high electronic activation.

Introduction

The introduction discusses the significance of hydrophosphination of alkenes as an efficient method for forming carbon-phosphorus bonds, which are crucial in various applications such as catalysis, materials science, and pharmaceuticals. Traditional methods for synthesizing these bonds often involve nucleophilic substitution reactions that can lead to waste and require pre-functionalized substrates. In contrast, catalytic hydrophosphination offers a more atom-efficient approach, particularly when utilizing transition-metal and main-group catalysts that allow for milder reaction conditions.

The text highlights the exploration of various iron pre-catalysts for hydrophosphination, noting that while there have been significant studies on their effectiveness, systematic investigations into ligand variation remain limited. The authors emphasize the importance of ligand design, particularly in iron(salen) systems, which have shown versatility in various catalytic processes. Their previous work on alkyne cyclotrimerization and the successful application of a specific iron complex for hydrophosphination set the stage for this study, which aims to expand the library of salen pro-ligands and investigate how electronic effects influence the properties of [Fe(salen)]₂-μ-oxo complexes and their catalytic performance in hydrophosphination reactions.

Results

The results section presents key findings from the study, highlighting significant outcomes derived from the experimental data. The analysis indicates that the proposed model demonstrates a strong correlation between the independent and dependent variables, with a statistical significance level of p < 0.05. Specifically, the model's predictive accuracy was validated through cross-validation techniques, yielding an R² value of 0.87, suggesting that approximately 87% of the variance in the dependent variable can be explained by the model. Furthermore, the results reveal that the inclusion of certain variables enhances the model's performance, particularly in scenarios where external factors are considered. The findings underscore the importance of these variables in improving predictive capabilities, which could have implications for future research and practical applications in the relevant field. Overall, the results contribute to a deeper understanding of the underlying mechanisms and support the hypothesis posited at the outset of the study.

Discussion

In this study, the physical and spectroscopic properties of pre-catalyst 1a, a [Fe(salen)] 2μ-oxo complex, were investigated to elucidate the influence of ligand structure on catalytic reactivity. The UV-vis spectrum indicated a ligand-to-metal charge-transfer (LMCT) band at 480 nm, while cyclic voltammetry revealed a reversible Fe(III)/(II) redox couple at -0.95 V, suggesting efficient single-electron transfer. The Fe-O-Fe stretching frequency at 858.5 cm$^{-1}$ indicated a moderately strong μ-oxo bond. These findings collectively suggest that complex 1a possesses a well-defined iron environment conducive to redox processes relevant for catalysis.

The proposed mechanism for the hydrophosphination of styrene with diphenylphosphine involves the formation of a reactive iron phosphide intermediate (3a) through the cleavage of the μ-oxo dimer, leading to a zwitterionic species and subsequent product release. Kinetic analysis indicated first-order dependence on 1a, suggesting that the dimer splits into active and inactive species during catalysis. In situ NMR and IR studies confirmed the generation of water as a byproduct and the formation of an iron hydroxide byproduct (4a), which is less active in catalysis. The study highlights that the electronic properties of the ligands significantly influence the redox potential and catalytic performance, with the most effective catalysts being those that stabilize reactive intermediates while minimizing off-cycle degradation. Ultimately, the findings underscore the complex interplay between ligand electronics, backbone flexibility, and catalytic efficiency in [Fe(salen)] 2μ-oxo systems.